The formula below is returing a 0 when vlookup does not find a match. Is there a way to return a space rather than a error or zero when the lookup is not met....
View 9 RepliesIf lookup doesn't find a match in the first column, can I get it to return an
"ERR" or "0", something that would let me know there was no match? Right now
it returns the value in the second column of the closest value.
I'm running a while loop and after about 3000 iterations get this error:
"Out of stack space"
I added some code I got today and now when it runs i get the code 28 out of stack space.
Basically when the If has determined which macro to run, once that macro has ran that should be it.But if deletedates2 has ran, it reverts back to deletedates and starts again, then I get the error:
Sub deleteDates()
Dim sh As Worksheet
Dim lr As Long
Application.ScreenUpdating = False
'# Determin if (O:O) has been deleted#'
If Application.CountA(Range("$O:$O")) = 0 Then
Call DeleteDates2
[code].....
How do I have this formula return a blank space if no match is found?
=INDEX($B14:$G14,MATCH(O$1,$B14:$G14,0))
I have a database that is growing and growing now obviously the more i put in it the bigger it gets
i have a cell that says something like "uk open welsh regional finals"
now to cut this down i would like to just put "uowrf" and when i hover the cell or even click the cell it would tell me what them initials stood for
is this possible?
I know different variations of this question get asked all the time... but I can't find an answer that I'm sure will *always* do what I want.
I have a range of cells (A1:A10), and I want to count all the text entries of positive length. That is to say, I don't want to count:
blanks
numbers
zeros
spaces
errors
I'm sure I need to use the LEN function, but I can't quite figure out how.
this counting expression will be inserted in a SUMPRODUCT formula
my lookup isnt returning the correct data- already tried sorting it doesnt work im pretty sure ive put in the correct formula
View 6 Replies View Relatedwhether I can handle errors in a way that tells me which object caused the error?
For example if a userform has two combobox's and one causes an error, can I return to a message box containing the name of the object (combobox1 or combobox2)?
I have tried returning err.source but I am either not using it correctly or it isn't intended to be used this way.
Is there a way to extend the space of my userform beyond its maximum space? I have tried using vertical scroll bars but they were of no use.
View 1 Replies View RelatedI have been working on different formulas to return the text string between the first and last space and have been unsuccessful. Is this possible?
I have tried several combos or Left and Right, I have been able to get the values after the first space, and the values before the last space, but not between the spaces.
String: Y60
~C CULT NUCLEUS 3X2 SPRING WST BK XL
Desired results: D60
CULT NUCLEUS 3X2 SPRING WST BK
I have two words of differing character lengths separated by a space.
How can I remove the first word... essentially, all the charcters to the left of the space AND the space itself?
i was hoping to get advice from anyone familiar with the "out of stack space" error. basically i'm building a UserForm-based app which reads spreadsheet data and stores it as a module-level variables (well, an array). the different buttons lets you edit the variable, and once you're done it writes back to the spreadsheet.
at least, that's the idea - lately i've been running into a lot of "out of stack space" errors, which have been pretty hard to pick out because my app's grown to the size where it's not so easy to pick out the root of the problem. what happens is the app will let you perform operations on the data with no error, but after repeating the operations too many times the application tells me i'm out of stack space. i've read up a bit on the error, and here's the list of possible causes i'm using as reference: Out of stack space (Error 28)............
I have the following formula that works fine until someone uses the space bar to clear a cells contents
=COUNTA($D11:$AI11)
When the space bar is used to clear a cells contents the COUNTA statements includes the space in the count. How do I count the number of cells with content and exclude the space bar space in a cell?
If find dot. with out space in ( A1 ) cell remove space after dot in cell ( B1 ) Cell, vb or macro
A
B
M V Micunovic
MICUNOVIC,M V
L.T.Kudrjavceva
KUDRJAVCEVA,L. T.
D Sumarac m.l.
M. L,D SUMARAC
I only want to remove one space at the end of my text within a cell, if there is a space.
Code:
Sub hth()
Dim c As Range
For Each c In Range("H1", Range("H" & Rows.Count).End(xlUp))
c.Value = Trim(c.Value)
Next c
End Sub
I have this vlookup formula and as you can see when I run it works good. The only problem is that I would like to have formula that it something is not found I don't get #N/A , but rather a 0 or blank.
=VLOOKUP(A6,GL!A$1:E$76,5,FALSE)
LOOKUPDIVDPTCC SALES 46120
010775010775 49,028,244.58
010200010200 3,373,145.76
010700010700 113,667.00
010300010300 14,382.54
011000011000 (1,518,076.05)
010600010600 589.98
011900011900 6,280.31
010900010900#N/A
011100011100 313.08
010750010750 570.90
Column A lists types of employees (managers, engineers, sales reps, etc.), each of which earns a seperate hourly rate. Column C lists hours worked, and Column D lists the total pay (Cx*Bx).
So column B is missing. Is there a way to generate the hourly rates in column B for each employee type in collumn A, i.e. if it's an Engineer, return $29, if it's a Technician, return $18, without an infinite set of True/Fasle conditions.
I have two files with the below data:
File A
Bob Jones
Williams, K.
File B
Jones, Bob
Williams, Ken
The only commonality between the two files is the last name. I can easily separate the last name off File B, since it is always 'last name, first name'. I want a lookup formula to use the last name from File B (after I separate it), lookup to File A, and if it finds a cell in a specified column that contains the same last name, return data from another column within File A.
I am trying to look up a value using VBA on 1 sheet and return it to a cell on another sheet.... I was hoping Evaluate sum product would work but I can't get it to. Basically I want to look up values in column C and D to locate the row then return value in column I specify.. below eg where Column C = SYD and column D = SHA, row = 6 .... value in L row 6 = 1
View 2 Replies View RelatedMy Lookup formula gives back N/A rather than an empty cell. I was unable to find the solution in frequently asked questions. Everything points to using VLookup which I feel doesn't fit my situation as I am only looking at one row of text.
The length of my targeted range changes so I am wanting to use the lookup for an extra amount of rows to ensure I capture all the data at any given time. Once my lookup gets to the end of the list and finds a blank cell i get back N/A. I tried to include "" in my formula to combat this but it isn't working. I have been using IF statements elsewhere on my sheet but there are 30 arguments and I was forced to find an alternative.
This is an abridge version of my formula:
=LOOKUP(Data!A2,{"","0129","0133","0163","0167","0187","0197","0202","0212"},{"","0201-0129","0205-0133","0201-0163","0213-0167","0201-0187","0216-0197","0212-0202","0217-0212"})
Didn't know if I was supposed to use [code] for that. Figured better safe than deleted
I am trying to set-up a formula that will look up two different values of a grid (x & y) and the result will be the intersection of the two values (z). If there is not a value at the intersecting cell i will have it display "n/a". I have attached an example of what i am trying to do but i have no idea how to set up the formula. I forgot to mention that the index or chart above remains constant but the lookups do change. I believe i may have figured it out. Here is what i came up with for cell C19. Should i have done anything different? =INDEX($A$2:$E$8,MATCH(A19,$A$2:$A$8,0),MATCH(B19,$A$2:$E$2,0))
View 8 Replies View RelatedIf you look at the attached xlsx file, you'll notice a drop down menu box (C5) which has two options 'wheat' and 'maize'. While the lookup function works fine for 'wheat' (i.e. it returns with the correct values from A33:A34, B33:B34 and C33:C34) it doesn't work for Maize. I've gone through the formula again and it beats me why it works fine for wheat, but using the same idea it doesn't seem to work for the maize option.
View 3 Replies View RelatedHow to return the value of what i looking up. for example i want to find the value of A1 from a range of B1:B10 if A1 is B1 then it return the value beside B1 for example the value of B1 is C1
View 2 Replies View RelatedI have rows with text and numbers. In order to ensure that the numbers are accurate, I have a "QC formula" that calculates a check using all of the numbers from 1 row. The challenge is that the "QC formula" needs to vary depending on a text value within the row.
How can I lookup up the text value and then return the correct active formula for that row? I have too many differet text values to do a nested If statement. see simplified example below.
Condition ABCFormula' Needed based on Condition
Red123A*B*C
Blue123A+B+C
Green123(A+B)*C
Hi there, please can you help me transfer data from 1 spreadsheet to another (I have attached a file which has 2 sheets).
I am trying to populate columns G to L (sheet B) with data from column H (sheet A) - the lookup is between 'Material' & '7410','7090','7680','7060','8630','7580' on sheet B & material & plant on sheet A.
I have tried H&VLOOKUP & INDEX/MATCH but I keep returning a #N/A..
I have a worksheet with the following values:
header row 15 17 19 25 etc.
each column underneath the row will have a value of 0 or -1
A B C D E etc
1 15 17 19 25
2 0 -1 -1 0
3 -1 0 0 0
4 0 0 0 0
etc
I want a formula that I would put in each row that would return the value of Row 1 if there is a -1 below that value. So, in this example:
Row 2 formula would return 17,19
Row 3 formula would return 15
Row 4 formula would return nothing
I am trying to automate the account classification of credit card (cc) expenses. The problem is charges to USAirways will always have random numbers after the vendor name on the cc download. I set USAIRWAYS as a Travel Expense and a simple Vlookup will not work.
For example, let's say a data dump in column C of the CC:
cell C2 is USAIRWAYS 037232A49429
CeLL C3:
USAIRWAYS 037282hf39647
Cell C4:
Facebook A8476H4
In column E I have my simple vendor name. Column F as the Vendor Account. For example E1 is USAIRWAYS. F1 is Travel Expense. E2 is FaceBook. F2 is Marketing Expense
In cell D2 & D3 I want to return Travel Expense anytime the formula sees USAirways in cell C2 returning the answer in column F after matching w/ column E. In cell D4 I want to return Marketing Expense.
I have a list of names in sheet1 column A and 3 more list of names on sheet2, sheet3 and sheet3. What I'm trying to do is find a match for each name on sheet1 column A on the other sheets and depending on which sheet it was found, I need a specific value returned to sheet1 column B.
For example, if A1 was found on sheet2, then on B1 I would need to return the value "Morning" but if it was found on sheet3, then I need the value "Afternoon" and if found on sheet3 I need the value "evening" returned to B1 and then the same for every other name on the list found on sheet1 column A.
What I tried was this.
This goes in Sheet1 B1 (then I would drag it down to search for the rest)
=IF(AND(MATCH(A1,'sheet2'!$E:$E,0)),"Morning",IF(AND(MATCH(A1,'sheet3'!$E:$E,0)),
"Afternoon", IF(AND(MATCH(A1,'sheet4'!$E:$E,0)),"Evening","Un-assigned"))
Now the problem with this is that it only works if there is a match on sheet2 but if there is no match, it just returns "N/A" and it does not move on to sheet3 and/or sheet4.
I also tried with vLOOKUP instead of MATCH and the same thing happens.
I also tried this and the only thing I get is "Un-Assigned"
=IF(AND(A1='sheet2'!E:E),"Morning",IF(AND(A1='sheet3'!E:E),"Afternoon",IF(AND(A1='sheet4'!E:E),"Evening","Un-Assigned")))
I have four columns, Play Date, 1st, 2nd, 3rd.
I have a total of 364 rows of data for this table.
My output table looks like the following:
{mod note - HTML not working and removed}
What I want the output from a formula(???) to do is put every 'Play Date' for each 1st, 2nd, & 3rd column for every number from 0 to 9. So under Column A for zero and 1st I want every date that is listed in the source table in column 1st to list out. All I can get is the first instance of a date and nothing else.esn't use that would be great.
FYI the formula that I used to get the one entry in column A row 4 was this:
=INDEX($AK$4:$AK$367,MATCH($A$2,$AL$4:$AL$367,0))