Lookups & Lists: Price Appear In Cell A3
Feb 24, 2007
I have three cells, let's call them A1, A2, A3. Cell A2 contains a list of products. I need to be able to have the price for these products appear in cell A3. The prices vary based on the contents of cell A1. There is a different list of prices for each different value in A1. I've tried to figure out a way to use a lookup, but can't seem to wrap my brain around it.
Contents of A1 determines unit prices in A3.
Contents of A2 is a list of products.
Contents of A3 is pricing for list products in A2, but pricing is controlled by content of A1.
View 6 Replies
ADVERTISEMENT
Jan 4, 2010
The analysis basically has 2 data components to it:
The 1st part, is a basic transaction list of shopping items bought through the year. Each transaction's shopping item also has the quantity of that item purchased at that time.
The 2nd part, is a pricing sheet for all the different types of shopping items. The pricing sheet has different prices for different quantities at which the item is purchased.
What I am trying to do is to find the relevant price for shopping item, which depends on not only what the item is, but also the quantity. In point form, it should follow the logic below:
1) Identify the item in the shopping list (worksheet 1) from the list of prices (worksheet 2)
2) Find quantity in the prices worksheet that is closest to the quantity in the shopping list (i.e. where the difference between the quantity on transaction list and the quantity on the pricing sheet is the least)
3) Pull the price for this "closest quantity"
I have uploaded a worksheet showing the structure of that data.
[url]
Is there some VB code I need to do this, or can it just be a few simple formulas?
View 4 Replies
View Related
May 11, 2009
The sheet has a price list (I attached the sheet). its a width x height(drop) format. If width or height <= minimum width/height then use the minimum listed. if width or height > minimum <=maximum then lookup in table next heightest value. here is the complication. any oversized items are priced as roundup((size -biggest size) / (biggest - second biggest size),0) * ( price of biggest-price of second biggest). so if my widths are
4600 4700 4800
10 25 35
and I am pricing 5050 I would do :-
calculate howmuch its oversize
5050-4800 = 250
Calculate the difference in the last 2 sizes
4800-4700 = 100
Calculate the rounded up multiples
250/100=2.5 rounded up = 3...........
View 3 Replies
View Related
Jan 6, 2014
I'm trying to set a formula that will calculate the price difference between two identical items in two different sheets. The items' order is not the same and each list includes some different items along the identical ones.
View 11 Replies
View Related
Apr 20, 2011
We currently have a few hundred vendors we order from for a retail business. We receive price lists in excel format, but they all differ in how they are formatted, i.e. one may have a column header of "UPC" and the next may say "UPC ID" and they may be in different columns. We currently format a handfull of these price lists so they have the same headers so we can easily compare costs, margins, etc, but we don't have the resources to do many more than this.
View 6 Replies
View Related
Jun 13, 2014
I am looking for creating a dynamic meeting log/calendar for my team. There's a couple of elements to my questions below:
I have a log with columns such as "Meeting Date", "Client", "Attendee" and have also set up month calendars on separate tabs which automatically update the dates according to a "Year" toggle using Janoffset, Feboffset, etc.
What I would like to do is have these calendars automatically populate a cell beneath each date with any meetings on that day. The client name and then a space then the attendee in brackets would be sufficient and with each meeting having its own line in the cell).
I have gotten a Vlookup working but have run into two snags: 1) where there is more than one meeting on a single day 2) I can only return one piece of information in the cell or otherwise have it blank, I can't have the client name AND attendee.
Is there any way to lookup all of that information in the one cell or is this just a pipe dream?
I have attached my workbook which contains my workings so far and in the first cell of Jan shown the "ideal" format. I'd like the data in.
View 14 Replies
View Related
Sep 5, 2012
I need J22 to multiply based on years in B22 AND increase 5% for each of those years (compounding) after two years (excludes year 1 from 5% increase). In addition the cell needs to remain blank if D22 is blank. B22 = 1, then the stockprice needs to remain the same, and only increase by 5% after year 1.
Currently...
B22 = a number of years indicated by the formula: =IF(A22="","",DATEDIF(A22,I3,"y"))
J22 =IF(ISNA(VLOOKUP(D22,stockprices,2,FALSE)),"",VLOOKUP(D22,stockprices,2,FALSE))
Example:
If J22 stockprice lookup is $1000.00, and the number of years listed in B22 is 6, then the reported value in J22 needs to be $1494.40.
Windows 7 Ultimate / Excel 2010
View 1 Replies
View Related
Jun 9, 2008
I have calculated the implied volatility for different single options using the newton raphson method. But, I also need to calculate the implied volatility which minimizes the sum of squared differences between the observed market price and the model price for each day. I guess one needs to use vectors (jacobian matrix) to do this, but I do not know how to expand the code to be able to do this. Anyone have any idea how this can be done? I have attached the [code] I have used to calculate the implied volatility for one option.
View 2 Replies
View Related
May 10, 2008
I'm trying to build a IF formula in column F, to use one of five different Vlookups based on cell content of D2 on down. I can't seem to figure this one out..
View 8 Replies
View Related
Sep 18, 2009
I'm working on an attendance spreadsheet and would like to set up an onchange() macro that will do the following:
Take the contents of cell in column E, paste them as a comment in a cell found in sheet from F, row from C and column from today's date. Confused yet? this should help, my sheet has the following columns:
A Date
B Time
C Employee Name
D Callback number
E Reason for absence
F Manager
Spreadsheet has pages for each manager and I use the formula:
View 14 Replies
View Related
Jul 24, 2006
All data is located within one book. I have two sheets with material codes in each sheet which include pricing (existing and current)
Sheet1 (has existing material codes plus existing pricing) Has about 1200 lines
Sheet2 (has current material codes plus current pricing), has about 36000 lines
I need to cross check if the material code (taken from sheet1) are still available in sheet2, and if they are, copy the current price back to sheet1. The current price needs to be pasted back into sheet1 (next to the existing price). If the material code doesn't exist (for whatever reason, in sheet2), the program needs to move onto the next line and leave the current price for that material code blank. The program should finish once all the lines in sheet1 are completed. I have attached a sample of what I'm trying to do,
View 7 Replies
View Related
Feb 12, 2010
I have have a large array of prices (across rows) and am looking for the closest price to match a price that I have been provided with. It's a basic benchmarking exercise on a row by row basis....and the price can be positive or negative. Is there a clean way to reference the closest price?
I have come across a fair amount of solutions, but none worked optimally - particularly the =INDEX(Data,MATCH(MIN(ABS(Data-Target)),ABS(Data-Target),0)) approach....it just didn't work for some lines, and only worked for values less than source price in other instances.
I would also like to reference the source on the next column.
View 12 Replies
View Related
Mar 17, 2009
I am trying to do an if statement where I ask if the 2009 price is .50 or less away from the 2008 price, bring back "Check" See below:
2008 2009
$23.95 $24.15
Using excel 2007
View 3 Replies
View Related
Aug 2, 2014
A1 cell includes; Dividend Payment : TWITTER (National Market) %39,06 (Closing Price: 5,28 Dolar), Cash Dividend I want 5,28 result in B1 cell ?
A2 cell includes; Dividend Payment : FACEBOOK %5,00 (Closing Price: 53,18 Dolar), Stock Dividend I want 53,18 result in B2 cell ?
In order to understand my question open enclosed file.
Note1: "Closing Price:" text in the cells are stable.
Note2: "Dolar" text in the cells are stable.
View 7 Replies
View Related
Mar 27, 2014
I am trying to get the Price to automatically fill cell C11 of the attached spreadsheet when a user enters Grade and Thickness information. I have tried index function, match function, vlookup function, and combinations of all with no luck.
View 5 Replies
View Related
Mar 14, 2012
I have a drop down box where I can choose 6 different metals, and another drop down box to choose different months in the future. I have the current price of each of these metals, but they change for each different month in the future - I also have how much the current price should change by for each of these separate months. I currently have a cell using a simple IF statement to choose the current price for each metal, however I'd like this cell to also be able to change for the specific different month in the future. This is roughly how it looks:
Expiry Jun-12
Product Copper
Future PriceXXXX
View 1 Replies
View Related
Mar 29, 2014
My problem in the given excel file
1. Sheet1; how to Add "B000" in the List A or "B00" if the digits and 5 in the list
2. Sheet2; how to remove "B000" or "B00" from the list
3. Sheet3; how to highlight difference or find out the difference between to lists
Update_List.xlsx
View 10 Replies
View Related
Jan 28, 2013
I have the following table in excel:
Price: Percentage:
$150 10%
$100 12%
$50 14%
I'm trying to use the percentage depending on what price I enter in a cell. For example; if I enter $135 then 10% will be used, if I enter $65 then 12% will be used, and if I enter $47 then 14% will be used.
View 3 Replies
View Related
Aug 13, 2008
to formulate Excel formulas to obtain the average buy price and average sell price for me to do this futures trading. Thanks a lot. I downloaded the Htmlmaker to post the spreadsheet here to show the manual way to calcualte the average buy price and average sell price but when it is on html form, i clicked on the 'Please click this button to send the source into clipboard' button & then i paste into this thread. Is the way to make my spreadsheet appear here correct cause it cannot work.
View 9 Replies
View Related
Oct 24, 2008
.............................24............30............36
300014999..........9.00%.......11.00%.....12.00%
1500099999........9.50%.......11.50%.....12.50%
100000249999.....9.00%......11.00%.....13.00%
I need an all inclusive formula (all in one cell) that would look at the above table and depending upon the price paid (3000-14999 or 15000-99999 or 100000-249999) and depending upon what monthly term they choose (24, 30, or 36), the appropriate finance charge would be used to calculate a total cost (9-13%). The only way I know to do this is by using IF's and AND's, but there are simply too many arguments and I cannot properly write the formula.
View 4 Replies
View Related
Mar 22, 2009
I am trying to organize it in a way that I can have all my purchases added based on my text criteria of certain purchase... Ill try to be as clear as possible. I have already organized it in a way that when I paste new months statement in my Excel file it sorts it by date, newest on the top, and I made Conditional Formatting by color on column D which states the Description of purchase. Starbucks appears in description cell but it is followed by number and location making each Starbucks cell in column D different in name. So its hard to use Exact phrase formula to combine the amount for that purchase.
My question is: Is there a formula that find a PORTION of text in a D column and automatically adds the price to the right of it together in one cell. There is a formula that looks for the whole text in the cell but that doesn't work when my name has always some extra numbers at the end of the word Starbucks
View 2 Replies
View Related
Aug 13, 2009
I own a Hair Salon which collates its daily takings using a spreadsheet. A section of this takings sheet asks staff to enter which Products have been sold and what they where sold for (RRP), so that once all products have been entered, totals at the end of the day allowing the end -of-day "till-up" process to reconcile purchases and services rendered aginst cash and cheques received.
Unfortunately there is over 600 products to choose from and this evergroes as new products are introduced by manufacturers. Names are long and often very similar, and product price manual listings are slow to reference, therefore the customer has to wait while the staff find the right product and select the right price.
All of this is subject to human error. What i would like is simply to enter part of the product name into a Cell and the right product to be visibly selectable and the price automatically added to an adjacent cell.
View 4 Replies
View Related
Mar 12, 2007
How can I conditionally total based on a Lookup?
e.g.
Column A shows the item code.
Column B shows the age of stock items as 1, 2 or 3 (years).
Column C has the cost of the stock items.
I want to total the costs for stock items (column C) according to age, so that the totals at the bottom would look something like:
Total stock value for year 1: $14,537.10
Total stock value for year 2: $7,657.70
Total stock value for year 3: $1,773.00
View 5 Replies
View Related
May 13, 2009
Is there a way to make a drop-down list optional? When I create drop-down lists the user has to make a choice from that list.
Example: a list of doctors. I need the user to be able to select from that list if the patient saw one of those physicians, but if the patient saw another doctor not on the list, I need the user to be able to enter the name of that other doctor. Currently the user has to select from the list or not enter a doctor. I am using Excel 2003.
View 2 Replies
View Related
Feb 3, 2009
I'm trying to create a supply order form. Is it possible to enter a product name in one cell and have the price for that product automatically appear in another cell? Is there a formula that I can use to make this happen?
View 2 Replies
View Related
Apr 4, 2014
How could I do a lookup on the following accounts but I want to ignore all the numbers and spaces. For example, in another sheet, I just have ACCRUED PTO and I want to do a vlookup on 601190 601190 5007 ACCRUED PTO.
407200 3044 UPR-STAT SELLER COV F.R.
407300 3047 UPR-GP/ST SELLER COV F.R.
407200 3040 UPR-STAT BUYERS
601190 601190 5007 ACCRUED PTO
601150 601150 5033 WAGES OVERTIME
View 4 Replies
View Related
Dec 28, 2012
I'm currently working on a side project for work that I believe will save many man hours as at the moment we're using paper and calculators!!! I'm scheduling buys. I've worked out formulas and formats to show how much we should buy and how they should be split (for example for UK purchases we buy x amount and split it 10% 90%). However, the dates of delivery are different. See below:
PORT L'poolPORT HKPORT Portsmouth
1.113-Aug-1206-Aug-1230-Jul-12
1.210-Sep-1203-Sep-1227-Aug-12
2.103-Sep-1227-Aug-1220-Aug-12
2.201-Oct-1224-Sep-1217-Sep-12
3.124-Sep-1217-Sep-1210-Sep-12
3.222-Oct-1215-Oct-1208-Oct-12
Campaign 1 first buy (1.1) I know that my product is sailing from port HK. Therefore I want it that in the 'delivery date' cell, it returns 6/aug/12 (that's the first lot of 10%, and underneath it returns 3/sep/12) which the remaining 90%...2.2).
However, both the campaign number AND port options are variable (using a data validation drop down list). In effect meaning if I choose campaign 2 instead of campaign one, it'll return the dates 27/aug and 24 sep....if I then change the port to Portsmouth, the dates will be 20 aug and 17 sep.
I've attached a quick view of the schedule I've created. The yellow cells are where I want the dates to be returned.
ScheduleEX.jpg
View 4 Replies
View Related
Mar 3, 2007
I'm trying to use a state transition matrix in Excel. I randomly generate a
percentage and want to lookup the value in a corresponding table where this value would fall if we were to sum across the row. For example, the first randomly generated value is 13.5% and we are starting in state 6. Therefore, I want a formula that looks in row 6 (starting state) and determines which column (1-6) has the value 13.5% if you sum the values across (in this case the answer is 5). Then 5 becomes the new starting state and so on. Is there a formula or combination of formulas in Excel that can carry out this complex function?
State transition matrix
123456
185.00%10.50%3.10%0.74%0.66%0.00%
28.90%79.00%9.20%1.70%1.20%0.00%
31.00%7.50%73.00%15.00%2.50%1.00%
40.00%1.00%13.00%76.00%9.00%1.00%
50.00%2.00%5.00%6.00%71.00%16.00%
60.00%1.00%1.00%6.00%9.75%82.00%
View 9 Replies
View Related
May 22, 2007
I have a master table that has a list of Product Names in column A and the associated product rollup names in column B.
Next, I have a data table that has a list of company names, Product Names (the names are all included in the master list of Product Names), Transaction Type (Sale, Cancel) and Value.
Lastly, I have a data summary template that I built where I want to be able to calculate total values based on the data table and the product rollup from the master table.
I would like to build formulas into the summary template where it looks at the Product Name column from the data table and finds the associated Product Rollup from the master table and then sums all the values for Transaction Type Sale and then sums up all the values for Transaction Type Cancel. The end result would be a Sales Value for Product Rollup 1, a Sales Value for Product Rollup 2, a Cancel Value for Product Rollup 1, a Cancel Value for Product Rollup 2, etc.
View 9 Replies
View Related
Jan 28, 2008
I have 2 sheets, First is the Master that contains 2 columns (Item Code and Item Name), The second also contains the transactions for item codes and item names.
I can check all the item names that it's entered according its code using Vlookup for every row...My question: Is there an array formula (one formula) to check that all Item names is correct according to its code in Sheet1?
View 9 Replies
View Related
