I have a problem with the next code and i don't know how can i solve it... i have a workbook with 8 columns and variable rows per day... This workbook has 2 sheets. What I want to do is find in the first sheet all the rows that in column E have the number 570 or 640, and after this, choose some of the columns and copy them in another sheet repeating this all the time until the last row... and copying in the next row of the other sheet, starting in the 20th...
LastRow = Range("A65536").End(xlUp).Row
Dim i As Integer, j As Integer
For i = 2 To LastRow Step 1
If Cells(i, 5) = 570 Or Cells(i, 5) = 640 Then
For j = 20 To 26
Cells(i, 2).Copy Destination:=Sheets("Final").Cells(j, 1)
Cells(i, 4).Copy Destination:=Sheets("Final").Cells(j, 2)
Range(Cells(i, 6), Cells(i, 8)).Copy Destination:=Sheets("Final").Cells(j, 3)
Next j
End If
Next i
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
What I'm trying to do is open a closed workbook from an active one, then go through a range looking for cells that has a different value than "noone", and copy the rows that does have something else than "noone" into the first worksheet.
What I've got so far is:
Code: Private Sub CmdHent_Click() Dim vikar As Range vikar = Range(I12, I42)
Application.Workbooks.Open Filename:="C:Documents and SettingsoybMine dokumenterook1.xlsm" Windows("book1.xlsm").Activate Sheets("Sheet1").Select
What I need is the code for a loop which copies a formula from cells E1 and E2 and then pastes it, staring at C7 and then every 32 cells down until row 20000.
The formula attached here is in cell J4. I pulled this formula down to J26. Then copy J4:J26 and paste to M2:M26, P2:P26, until CG2:CG26. I need 26 times to paste to the range. There are even 4 columns distance between two pasting range.
How can write a For Loop to copy and paste to these ranges?
I'm trying to find a certain word in a range in a sheet and then copy all the data from the same row into another sheet. It needs to loop so that all occurrences of the word are found and the data copied. Below is the code i have tried to use. It doesn't fall over but it doesn't work either!
Private Sub CommandButton1_Click() Dim Class As Range Dim Cell As Range On Error Resume Next VBA: Set Class = Selection.SpecialCells(xlConstants, xlTextValues) For Each Cell In Class If Cell.Value = "Math" Then Cell.EntireRow.Copy '1 Sheets("Sheet 3").Range("B2").PasteSpecial '2 Application.CutCopyMode = False......................
Creating a worksheet to consolidate his financial data. I've been able to muck my way through most of the VBA code by looking at examples on the forum. However, I cannot figure out how to add the last loop or where to place it. I can copy the values from the P&L sheet to the DATA sheet but I cannot discover a way to also pull the values from the BalSht sheet to the Data sheet. I think the BalSht loop will be almost identical to the "P&L sheet loop, and be placed just below it - but I'm not successful in multiple attempts and days of trying. How can I accomplish this?
Here's the VBA code:
VB:
Sub NewISCopy() On Error Goto errorHandler '************************************************************* Dim CopyCol As String Dim PasteCol As String CopyCol = "G"
I have a financial model (attached) which calculates the final cash flows (in a calculation sheet named 9.Operations, rows 428 to 437) for a particular plot. However,the model has a list of 17 plots in the input sheet (3.Input-Plot Details). The macro must change the plot number in the 9.Operations sheet(cell G11), re-calculate the final cash flows and paste all the final cash flows for 1 to 17 plots in a single separate sheet consecutively.
I've attached below a small part of my code. I am wondering if there is a way to do this, without copying and pasting something 30 times, but using a loop instead. As you can see there are a series of productsNumbers (30 in total, but this example is for 3). Each productNumber is a string that is actually a 5 digit number, so it can be an integer as well, if it has to.
I would like to code below to loop for as many products as there may be. The way that I have it right now does not work - I feel that I am missing something small or that there is no way to do this.
I have Created the below macro, however I cannot figure out how to make it loop so that is continues to copy the next column over ( so go from column E:E , To Column F:F, and then To Column G:G), and paste the data into the same column (D:D or Range paste_range) everytime, and print.
Sub paster_print() ' ' paster_print Macro ' ' Columns("E:E").Select Selection.Copy Application.Goto Reference:="paste_range" Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False Application.Goto Reference:="Print_Area" Application.CutCopyMode = False End Sub
I am looking to copy a row of data from a worksheet to another closed workbook.
Basically i want the macro to look at the sheet "Register" and copy each row as long as it is not blank to another workbook in a shared folder, and find the next blank line.
macro would be
if "register" value in A2 is not blank copy row to next blank row in D: est.xls sheet data
Col A: Date Col B through M: Headings are employee names, data is how many hours of vacation per DATE.
User will enter a date in column A, and then the corresponding number of vacation hours a person took that day. There are a dozen or so employees, so we're only entering a record on the dates that someone has taken vacation time. Dates are mm/dd/yyyy format. The hours are number/two decimals.
What I would like:
An update command button (hey, I can actually do that part!) that has an on-click that:
Loops through each column B through M, and copies the information to the employee's individual sheet.
The individual sheets:
Columns are: A = Date of vacation B through M are months Jan through Dec.
Data starts *paste* in cell A12, where the date of the first vacation day they take should appear. If it was a half-day in February, .5 (or .50) will appear in cell A14.
If it's not clear, I'm happy to send the file! If you put your email here, I'll send it right away. If you email me at home, it'll be a few hours before I can send.
No rush on my part.
Really appreciate it!! I'm not a coder. I know small bits and pieces. When you start talking about Dim, I think of chinese food.
_________________ TheWordExpert
[ This Message was edited by: Dreamboat on 2002-04-11 10:20 ]
I have some data for my students in the range D2:G251, where each row is a different student. I need to write a macro that, if there is an 'x' against their name in column D, will copy the data in columns E-G into range A1:B500 and copy that range into a new workbook and save the workbook with the students name. The following code does this for the first row, but I don't know how to write a loop (or whatever) to make it do it for the other 249 rows.
Private Sub CreateNewSheets_Click() Dim ws1 As Worksheet Set ws1 = ThisWorkbook.Sheets("Template") Dim Rng1 As Range Set Rng1 = ws1.Range("A1:B504") varPath = ThisWorkbook.Path If ws1.Range("D2") = "x" Then ws1.Activate ws1.Range("e2:g2").Copy ws1.Range("B1").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=True Rng1.Copy Workbooks.Add....................
Finding the value "OK" in a range of data in Worksheet(1) out of Range("Product"). Ones the value "OK" is found, the entire row is cut and then pasted into a new worksheet 'Range("A3")'. Then the loop sets in and finds the next value "OK" in the range untill it reaches the end of the predetermined Range("Product").
The only problem I have is that the code I have written already performs the process, but when pasting the data into the new worksheet, paste's all of the found rows into the same row. So what you are left with in the new pasting sheet (Worksheet2), is only the last found row because it keeps overiding previously found data. What I need the Macro to do is find the next availible blank row in Worksheet2 and for all values cut out of Worksheet1. Now there was a simular posting to this on the forum, but when I tried it in my code it would not work...
Sub FindAndPaste1() With Worksheets(1).Range("Product") Set c = .Find("OK", LookIn:=xlValues) If Not c Is Nothing Then firstAddress = c.Address Do c.EntireRow.Cut Destination:=Worksheets("Sheet2").Range("A3") Set c = .FindNext(c) Loop While Not c Is Nothing And c.Address <> firstAddress End If End With End Sub
I also attach the Excel spreadsheet called Product Macro.xls
I want to make a vba (macro) for excel that will look at the column to the left of an active cell and if there is a formula there drag it over to the right into the active cell and if there is not a formula there copy and paste value of what is in the active cell into itself deleting any formulas that may have been there. on top of that if the cell to the left of the active cell has no boarding I need to copy it and paste format to active cell. I need it to continue a number of times to be decided in cell A1 and just go down the column doing this. Please help, I know it sounds hard but I need it for 10,000's of lines of code and really cant do it by hand ...
Dim UltFila As Long, i As Integer, k As Integer UltFila = Range("A65536").End(xlUp).Row k = 2 For i = UltFila To 2 Step -1 If Cells(i, 2) = 4102 Then Range(Cells(i, 3), Cells(i + 15, 6)).Copy Sheets("Final").Cells(k, 1) End If If Cells(i, 2) = 4104 Then Range(Cells(i, 3), Cells(i + 15, 6)).Copy Sheets("Final").Cells(k, 1) End If ..................
I have a large worksheet (Sheet1) containing approximately 15,000 records (15,000 rows x 21 columns). I need to search through all these records, and manually decide whether a record should be copied onto another worksheet (Sheet2) or not. The code I have written works very well (as far as I can tell), but it is extremely slow (the searching takes forever).
The code is as follows:
Sub SearchAndCopy() Dim SearchRow As Long Dim LastRow As Long Dim SearchColumn As Long Dim LastColumn As Long Dim CopyToRow As Long Dim SearchString As String Dim Found As Boolean Dim Response As Integer On Error Goto Err_Execute Found = False 'Fetch Search Term Sheets("Sheet2").Select SearchString = LCase( Range("F3").Text)......................
I have an issue to where I have my worksheet entitled "Index Data" as my output. I need to loop multiple worksheets to copy cell D2 and copy onto worksheet "Index Data" in column B.
It should look similarly to this:
VB:
Sub Range("D2").Value = myinput1 For Each ws In Worksheets [relevant code] Next ws End Sub
VB: Sub CopyNextTab() WorkbookName = ActiveWorkbook.Name Cells.Select
[Code]....
I'm not entirely sure if this is correct, but what I'm looking to do is the following:
1. On the currently selected sheet, copy all data into the "Pasted Data" sheet on "Test.xlsm" 2. On the "Calculations sheet", copy all information across to the next available row on "Master Sheet" 3. Select the original Workbook and move to the next tab 4. Repeat until there are no more tabs remaining
So far as I can tell steps 1-3 are working (however I'm not entirely confident with my code to move to the next sheet as I'm not sure it will end the sub on the last sheet).
I have a loop function that goes through a list of employees and i want to move their name to a different sheet(monday, tuesday...) so that I know who is in on what day. is there a simple way to have it add the next name to the bottom of the list?
I'm attempting to create a worksheet to consolidate his financial data.
How to add the last loop or where to place it.
I can copy the values from the P&L sheet to the DATA sheet but I cannot discover a way to also pull the values from the BalSht sheet to the Data sheet.
I think the BalSht loop will be almost identical to the "P&L sheet loop, and be placed just below it - but I'm not successful in multiple attempts and days of trying.
I would like to loop through all spreadsheets in a folder, copy sheet "january" from each spreadsheet into a mastersheet. No idea how using vb all help appreciated.
i would like to change the name of the sheet to a cell reference before it gets pasted into the new sheet.
I'm trying to copy data from multiple spreadsheets into one summary spreadsheet. Each spreadsheet that I'm looking to copy data from is stored within a folder, named as a date, within a sharepoint site.
Each report is named as 'Report to PMT from Vauxhall', 'Report to PMT from Ford', 'Report to PMT from Fait' etc etc. and the format of each report is exactly the same.
From the attachments you will see that I'm trying to copy the following from the Report to PMT from Vauxhall to Summary Report:
Report to PMT from Vauxhall Cell D11 to Cell D19 of the Summary Report Report to PMT from Vauxhall Cell E11 to Cell D19 of the Summary Report Report to PMT from Vauxhall Cell F11 to Cell D19 of the Summary Report Report to PMT from Ford Cell D11 to Cell D20 of the Summary Report Report to PMT from Ford Cell E11 to Cell D20 of the Summary Report Report to PMT from Ford Cell F11 to Cell D20 of the Summary Report etc. etc.
I have SQL data that I'm extracting and populating two sheets accordingly on daily basis. (This is done manually and sheets are refreshed with new data)
Name of tabs: (Peaked & Confirmed)
Each sheet consist obviously of different data but table extract contains the same name & number of columns.
Name & Number of Columns :Org_province Port_Of_Load Port_Of_Discharge BK_Client_Name FF_BK_Name VesselVoyage GrossWeight Export_Closing_Date_Yard................
I am putting in search items and running a macro to find the items on 'physical servers' WS, copying the header in that WS and the entire line the match appears on, though I cannot get it to do this.... it is really causing me stress
Then next part that is working is the items that return false are showing up on the results page - this is expected and what i want it to continue to do.
What I cant seem to work out also is how to run the search on the 'Virtual Server' WS also and return the results to the results WS as just like the 'physical servers' WS.
I have included some dummy data + code + the expected result on the 'Server Results' WS.
I'm trying to use a VBA Macro to copy and paste a row of cells from 14 worksheets into in another worksheet in a Colum. The worksheets are entitled Data 1, Data 2, Data 3 and so on until Data 14 and the worksheet that I want to paste the data to is entitled sheet 1. The row of data that I want to copy and paste is in the same place on each worksheet C4 - IR4. I can do this using the Macro recorder but there is a lot of code and ultimately I want this to be part of a much bigger Macro once I get better at figuring this stuff out.
I have read that this can be done by using a Do Until and then using a loop. By the way I am using Excel 2003 with XP.