Copy And Paste In New Worksheet With Loop
Feb 15, 2007
Finding the value "OK" in a range of data in Worksheet(1) out of Range("Product"). Ones the value "OK" is found, the entire row is cut and then pasted into a new worksheet 'Range("A3")'. Then the loop sets in and finds the next value "OK" in the range untill it reaches the end of the predetermined Range("Product").
The only problem I have is that the code I have written already performs the process, but when pasting the data into the new worksheet, paste's all of the found rows into the same row. So what you are left with in the new pasting sheet (Worksheet2), is only the last found row because it keeps overiding previously found data. What I need the Macro to do is find the next availible blank row in Worksheet2 and for all values cut out of Worksheet1. Now there was a simular posting to this on the forum, but when I tried it in my code it would not work...
Sub FindAndPaste1()
With Worksheets(1).Range("Product")
Set c = .Find("OK", LookIn:=xlValues)
If Not c Is Nothing Then
firstAddress = c.Address
Do
c.EntireRow.Cut Destination:=Worksheets("Sheet2").Range("A3")
Set c = .FindNext(c)
Loop While Not c Is Nothing And c.Address <> firstAddress
End If
End With
End Sub
I also attach the Excel spreadsheet called Product Macro.xls
View 4 Replies
ADVERTISEMENT
Jun 25, 2014
I do have macro which populates sheets based on given list.
I want to paste all data in newly created sheets from "Template".
I do not want to loop 2 sheets ("DATA" & "Template").
Data must be pasted with format & validation. Validation exists on Template sheet only. No other sheet is referred for validation.
View 2 Replies
View Related
Jan 31, 2014
I need to loop through worksheets in a workbook and copy every first cell value(A1) and then paste into a new worksheet.
I have tried various loops. some have copied first value for the first sheet and then pasted in the new sheet. while others have been not so good.
This is the code I have so far and this does not work at all.
Code:
Sub Check()
Dim ws As Worksheet
Dim lr As Long
Dim treg As Worksheet
[Code]......
View 1 Replies
View Related
May 21, 2012
What I need is the code for a loop which copies a formula from cells E1 and E2 and then pastes it, staring at C7 and then every 32 cells down until row 20000.
View 2 Replies
View Related
Oct 11, 2012
The formula attached here is in cell J4. I pulled this formula down to J26. Then copy J4:J26 and paste to M2:M26, P2:P26, until CG2:CG26. I need 26 times to paste to the range. There are even 4 columns distance between two pasting range.
How can write a For Loop to copy and paste to these ranges?
=SUMPRODUCT(--($E$4:$E$10004=RIGHT(I$1,2)),--($C$4:$C$10004=$H3),$D$4:$D$10004)
View 1 Replies
View Related
Sep 14, 2013
I have 12 Workbooks (each for every month) name Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec
These workbooks contains something like the following
Name
Days of Vacation
Something Else#1
Something else#2
Something else #3
[Code] .....
I want something to loop through the months and copy all rows for mary in a summary sheets and sum the Days of Vacation from Column B.
Note that The first Workbook has some data, the 2nd Workbook is the Jan and the 13 Workbook is the Dec, the 14t is the Summary Workbook
VB:
Sub SearchForString()
Application.Calculation = xlCalculationManual
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
LCopyToRow = 2
[Code] .....
View 7 Replies
View Related
Dec 19, 2013
I have a financial model (attached) which calculates the final cash flows (in a calculation sheet named 9.Operations, rows 428 to 437) for a particular plot. However,the model has a list of 17 plots in the input sheet (3.Input-Plot Details). The macro must change the plot number in the 9.Operations sheet(cell G11), re-calculate the final cash flows and paste all the final cash flows for 1 to 17 plots in a single separate sheet consecutively.
View 6 Replies
View Related
Nov 18, 2009
I've attached below a small part of my code. I am wondering if there is a way to do this, without copying and pasting something 30 times, but using a loop instead. As you can see there are a series of productsNumbers (30 in total, but this example is for 3). Each productNumber is a string that is actually a 5 digit number, so it can be an integer as well, if it has to.
I would like to code below to loop for as many products as there may be. The way that I have it right now does not work - I feel that I am missing something small or that there is no way to do this.
View 3 Replies
View Related
Dec 30, 2009
I m new to macro and I need to copy the data from 49 cells value which are
present in Two Rows to be converted into TWO columns and 48 rows
I have run a macro for this and I got
Sub Macro4()
'
' Macro4 Macro
'
'
Sheets("WRIGLEY011209").Select
Range("C1:AX2").Select
Selection.Copy
Sheets("Sheet3").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=True
Range("A1").Select
Sheets("WRIGLEY011209").Select
Range("A2:B2").Select
Application.CutCopyMode = False
Selection.Copy
Sheets("Sheet3").Select
ActiveSheet.Paste
Application.CutCopyMode = False
Selection.AutoFill Destination:=Range("A1:B48"), Type:=xlFillDefault
Range("A1:B48").Select
End Sub
View 9 Replies
View Related
Mar 29, 2007
I want to make a vba (macro) for excel that will look at the column to the left of an active cell and if there is a formula there drag it over to the right into the active cell and if there is not a formula there copy and paste value of what is in the active cell into itself deleting any formulas that may have been there. on top of that if the cell to the left of the active cell has no boarding I need to copy it and paste format to active cell. I need it to continue a number of times to be decided in cell A1 and just go down the column doing this. Please help, I know it sounds hard but I need it for 10,000's of lines of code and really cant do it by hand ...
View 8 Replies
View Related
May 18, 2007
i have this code
Dim UltFila As Long, i As Integer, k As Integer
UltFila = Range("A65536").End(xlUp).Row
k = 2
For i = UltFila To 2 Step -1
If Cells(i, 2) = 4102 Then
Range(Cells(i, 3), Cells(i + 15, 6)).Copy Sheets("Final").Cells(k, 1)
End If
If Cells(i, 2) = 4104 Then
Range(Cells(i, 3), Cells(i + 15, 6)).Copy Sheets("Final").Cells(k, 1)
End If ..................
View 9 Replies
View Related
Jan 16, 2014
I'm currently running this macro:
VB:
Sub CopyNextTab()
WorkbookName = ActiveWorkbook.Name
Cells.Select
[Code]....
I'm not entirely sure if this is correct, but what I'm looking to do is the following:
1. On the currently selected sheet, copy all data into the "Pasted Data" sheet on "Test.xlsm"
2. On the "Calculations sheet", copy all information across to the next available row on "Master Sheet"
3. Select the original Workbook and move to the next tab
4. Repeat until there are no more tabs remaining
So far as I can tell steps 1-3 are working (however I'm not entirely confident with my code to move to the next sheet as I'm not sure it will end the sub on the last sheet).
View 5 Replies
View Related
Jan 8, 2012
I'm trying to use a VBA Macro to copy and paste a row of cells from 14 worksheets into in another worksheet in a Colum. The worksheets are entitled Data 1, Data 2, Data 3 and so on until Data 14 and the worksheet that I want to paste the data to is entitled sheet 1. The row of data that I want to copy and paste is in the same place on each worksheet C4 - IR4. I can do this using the Macro recorder but there is a lot of code and ultimately I want this to be part of a much bigger Macro once I get better at figuring this stuff out.
I have read that this can be done by using a Do Until and then using a loop. By the way I am using Excel 2003 with XP.
View 6 Replies
View Related
May 24, 2013
Simple loop macro.
1) Select/Copy rows 1 thru 35 of column C from "Start" tab.
2) Special Paste/transpose them in row 2 of "Finish" tab (1st 35 columns in row 2 should fill up).
3) Go back to "Start" tab, move exactly three rows down from bottom of previous selection in column C and copy the next 35 rows (rows 38 thru 72 in column C).
4) Again return to "Finish" tab, and special paste/transpose in next row down (row 3 in this case).
5) Continue to repeat this action until all rows of data in column C have been copied and transposed/pasted from "Start" tab to "Finish" tab. Variable number of rows on "Start" tab.
View 9 Replies
View Related
Mar 16, 2014
I have a workbook, in which from sheet1, I have to copy first row and paste it in another workbook in sheet1 This I have to do for all the rows present in first workbook. I have written code for one single row, but for all rows,
below is the code :
Option Explicit
Dim wbIP As Workbook
Dim wbJT As Workbook
Dim wbET As Workbook
Dim mypathET As String
Dim mypathJT As String
Dim mypathIP As String
Dim vals As Variant
[Code]...
View 1 Replies
View Related
Jun 16, 2014
I have a long column of data in column D (D2 to D8761) and I would like to sequentially select 24 cells at a time (D2:D25, D26:D49, D50:D73...D8738:D8761) copy them and paste them to another sheet as separate rows.
For instance, the selected data from Sheet 1, D2:D25, would be pasted/transposed to Sheet 2 B9:Y9. I would like the macro to loop so it would then select D26:D49 and paste/transpose to B10:Y10 and so on until it finishes transposing the final data group of D8738:D8761.
I'll add the macro that I recorded using the brute force method so perhaps you can have a better understanding of what I am trying to accomplish.
Sub Macro5()
'' Macro5 Macro
Range("D2:D25").Select
Application.CutCopyMode = False
Selection.Copy
Sheets("Sheet2").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
[code].....
View 3 Replies
View Related
Dec 1, 2006
My code (with help from this forum) loops through all workbooks, all sheets and all columns OK as I have tested it with message boxes
I need to take the value of Range("C5") from each column of all sheets of all workbooks
and paste it to Range("A4") downwards in Workbook("Loop Folder.xls") . That is, each new value is inserted in the next row of column A.
Sub test4() ' populate analysis sheet
' copies cell("C5") from each column in each sheet in each workbook in a directory
Dim Mypath As Variant
Dim excelfile As Variant
Mypath = "U:September 2006" ' folder where all excel files reside
excelfile = Dir(Mypath & "*.xls")
Application.DisplayAlerts = False
Do While excelfile <> "" ' loop all files
View 7 Replies
View Related
Feb 1, 2009
I have a data sheet with employee information. Only one column. It prefixes information with codes, but keeps it in the same cell. I want to move data of certain types into their own columns, but the amount of data is variable, so I cannot simply move every Nth cell, etc.
i.e.
Employee#1
200 Firstname Lastname
204 99999999 (Employee ID)
G38 00005000 (i.e. Pension Deduction)
H38 00007580 (i.e. Benefits Deduction)
X96 00012099 (i.e. Staff Club Deduction)
Employee#2
200 Firstname Lastname
204 99999998
G38 00000775
X96 00001000
So you see some employees may have different codes altogether. But I know that I want all the cells that start with 200 to be offset (-1,1), and all the cells that start with 204 to be offset (-1,2), and so on so that basically I end up with columns of info instead of a one column list.
I have been reading and studying other peoples' macros, and am just starting to grasp the basic. When I wrote my own to accomplish this, I put this together, which doesn't work. But I don't know enough to know what I don't know.
View 7 Replies
View Related
Jul 26, 2009
I have one column of names in excel. The column may contain more than one row with the same name but these rows with the same name will all be grouped together. This is an exampe (each name represents a row in column A):
ColumnAColumnB
andrewData
julieData
julieData
julieData
jonathanData
jonathanData
What I want to do is copy the rows with the same information, e,g, the rows with 'julie' above, paste them into a new spreadsheet and email this spreadsheet to specific email addresses and then do the same for 'jonathan'.
I can work out how to send an email using VBA but I am really stuck as to how to go through the rows and send the email in discrete 'chunks'. I have tried using a for next loop, looping through the rows and copying/pasting rows that are the same as the previous one into a new spreadsheet but this does it one row at a time.
If I include the instruction to email the spreadsheet within the loop this would also email the new spreadsheet one row of information at a time, i.e. three emails for 'julie' each containing a spreadsheet with one row of information on it, rather than one email containing one spreadsheet with all three rows on it.
View 4 Replies
View Related
Jul 27, 2012
Here is my situation:
Background:
- Excel VBA 2007
- I have a macro that inserts a set of vlookups in range D3:D8.
- When D3:D8 has been filled, I need the macro to COPY the Vlookups in D3:D8, skip down one cell, and paste in the next set of open spaces.
- I have a Do statement that isn't working, and and IF...THEN that quits the loop when a blank cell is found (This means the range of vlookups is no longer needed).
Objectives:
- Fix Do...Loop so it copies D3 throuh D8, skips a cell below D8, and Pastes in the next section? - There will sometimes be only one section to paste in, and sometimes 20. It is dynamic.
Code:
Sub InsertVLookup2()
' This macro inserts the VLookup into cell B2
Dim lastcolumn As Long
Range("D3").Formula = "=VLOOKUP($A2,INDIRECT(""'"" & B$1 & ""'!A:I""),9,FALSE)"
Range("D3").Select
[Code] .......
View 1 Replies
View Related
Sep 30, 2013
I have a rand () which provides me a different number upon calculate. I would like to run a loop for 1000 times and take the value and copy and paste in a range.
The below sorta works, but at times it stops or doesn't work at all. I have a loop for the counter and the for each to place the value into the cell and have it run over and over and placing the value in the next cell underneath. I have the counter at 10 so I dont get stuck in some endless loop before I know it works.
Code:
Sub montecarlos()
Dim MCs As Long
Dim c As Range
Dim lCount As Long
Dim lNum As Long
lCount = 0
lNum = 1
Worksheets("MonteCarlo").Activate
[code].....
View 6 Replies
View Related
Nov 5, 2013
Let's say sheet - "delivery" - has a row1 that includes all possible delivery days. So A1 is 1.9.2013, B1 is 15.9.2013, C1 is 1.10.2013 and so on.
I want to make a macro, that will gradually go through whole row 3 in sheet "delivery" and look for "A1" date in sheet "Orders". Sheet "orders" have for example in column B the date of delivery, and in column C product of the delivery.
I want the macro to find all deliveries with "A1" date, and paste all products that will be delivered on this day under cell A1 (sheet delivery). then move on to the cell B1 (sheet delivery) - find all orders in sheet orders, that will be delivered on B1 date, and list all products with this delivery date under cell B1 (sheet delivery).
Example:
Sheet order
A
B
C
Date of delivery
Product
1.9.2013
orange
[Code] ........
Unfortunately simple Pivot table is not able to do this simple list.
View 3 Replies
View Related
Sep 24, 2012
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
View 2 Replies
View Related
Nov 24, 2013
I am trying write code withVBA to save separate file in a different folder with Loop.
Write a code with "loop" till it finds empty cell in the column and for every change in number a separate file needs to be saved in specified folder with file name as "10010, 10011,10012... and so on with data copied in the file saved.
Below is the data.
10010
10011
10011
[Code] ....
View 6 Replies
View Related
Dec 11, 2008
I would like to copy and paste two columns from a worksheet to another worksheet simultaneously. I would like to have a macro to do this function.
View 5 Replies
View Related
Mar 15, 2014
Creating a worksheet to consolidate his financial data. I've been able to muck my way through most of the VBA code by looking at examples on the forum. However, I cannot figure out how to add the last loop or where to place it. I can copy the values from the P&L sheet to the DATA sheet but I cannot discover a way to also pull the values from the BalSht sheet to the Data sheet. I think the BalSht loop will be almost identical to the "P&L sheet loop, and be placed just below it - but I'm not successful in multiple attempts and days of trying. How can I accomplish this?
Here's the VBA code:
VB:
Sub NewISCopy()
On Error Goto errorHandler
'*************************************************************
Dim CopyCol As String
Dim PasteCol As String
CopyCol = "G"
[Code]...
Excel file attached.
FI-LOOP-5.xlsm
View 7 Replies
View Related
Mar 14, 2014
I'm attempting to create a worksheet to consolidate his financial data.
How to add the last loop or where to place it.
I can copy the values from the P&L sheet to the DATA sheet but I cannot discover a way to also pull the values from the BalSht sheet to the Data sheet.
I think the BalSht loop will be almost identical to the "P&L sheet loop, and be placed just below it - but I'm not successful in multiple attempts and days of trying.
How can I accomplish this? Here's the VBA code:
[Code] .....
View 3 Replies
View Related
Sep 5, 2006
I have an excel sheet being used as a mini database table.Rows = records, columns = fields. I have some VBA to create a copy of base template in the workbook, then populate the new template with the data from a row/record in the db. I currently have about 100 records. After about the 57th record I recieve RT error 1004. "Copy method of worksheet class failed". I think this is becuase excel is running out of memory. My laptop has 1gig of ram, and i have closed all other apps when running the macro.
Is there a way to free up memory while the vba is running, without clearing my "for" or count position which tells the macro to create a new sheet and which row/record in the db to populate the data in the new sheet.
View 5 Replies
View Related
Feb 18, 2014
I have data from (row 1, column 1) to (row 53, column 5) on 283 consecutive worksheets in a singular excel file that I would like to be presented on a singular worksheet starting from the data on worksheet 1 and descending to the data on worksheet 283.
I am looking for a copy and paste loop solution that will copy the data from each page and sequentially paste the results on a singular output page in descending order (worksheet 1 data, worksheet 2 data... etc) so that I can sort the data.
View 1 Replies
View Related
May 21, 2014
I currently have created a database (sheet two) with information including ID # (VH-XXXXX) in Column A and all the necessary information related to that unique Item. What I would like to do is search based on the ID number, have it filter, then copy and paste the row into another worksheet. Is this possible? I am relatively new to VBA and have written codes for copy and pasting rows, but never with an autofulter.
View 3 Replies
View Related