Copy Data To Other Sheet + Loop To Last Record
Jan 11, 2010
I have SQL data that I'm extracting and populating two sheets accordingly on daily basis. (This is done manually and sheets are refreshed with new data)
Name of tabs: (Peaked & Confirmed)
Each sheet consist obviously of different data but table extract contains the same name & number of columns.
Name & Number of Columns :Org_province
Port_Of_Load
Port_Of_Discharge
BK_Client_Name
FF_BK_Name
VesselVoyage
GrossWeight
Export_Closing_Date_Yard................
View 4 Replies
ADVERTISEMENT
May 26, 2009
I am looking to create a macro that will create a new sheet when data is added on a summary sheet. Example.
1. Summary sheet called "Variations" contains columns that will contain the information needed for new sheet (Columns A to D)
2. When data is entered on "Variations" sheet: Column B, then macro automatically creates new sheet renamed to e.g. VO1 (Number used on "Variations" tab) and is a copy of "Master" tab.
3. Data entered in Column A to D on "Variations" tab is automatically entered onto new sheet created (e.g VO1). Shown is blue on attached file. Additional data is updated on "VO1" sheet and this then links back to "Variations" tab
View 6 Replies
View Related
May 30, 2014
I have built a sheet - sheet1 like this: It has 2 columns, header (line 1,9,19 etc...)and blank line (line 8,18,27 etc...) between groups. Groups are derived in the first column - Name.
What I'm trying to do is loop to take each group and copy it to a new sheet. Also it is necessary that the name of the new sheet will be derived from column A (A,B,C etc...).
NamePrice
A1,054,999
A1,132,500
A1,140,000[code].....
View 8 Replies
View Related
Nov 3, 2009
a macro or code to copy row B10 To another sheet as a record but paste it down a row as i keep overwriting previous paste, tried offset etc but still stuck. I HAVE THIS SAME PROBLEM ON 2 SPREADSHEETS NOW. All i need it to clone the top row everytime data is put there, but where the data goes to paste it down a row so creating a record. Also i need another macro to search the G10 cell of the same row for the word replace and if so copy that row to another sheet as well.
View 9 Replies
View Related
Aug 18, 2012
I have the day of the week in B1 Emp Nbr in B2 Hours worked on B11
What I need a macro to do is match B1(day of the week) with the corresponding offset column in F1-R1, Pos and Post the Emp NBR(b2) and Hours(b12) in the corresponding column (F4 and G4)
I then will key in a new Emp and the hours and click the macro to execute the move over to the correct column and down one row.
Do this until I post Emp 999 at which time it will exit the macroOzgrid weekly hours.xlsx
The next day I will change the day in B1 to 2, corresponding to TUE, and it will move over to the correct column (H4 and I4) and post the daily data until I key in EMP 999
Then continue for the rest of the week.
View 3 Replies
View Related
Dec 13, 2006
once I get the pretty boxes and such, how do I link this form to a sheet to record data? How do I get it to run? I have tried searching the forum, but it seems that most of you already know that part and don't have any problems there.
I know this is probably very very basic and I will smack my face with my hand when you point it out. I just have never created forms with Excel before. I am used to using SalesLogix and when I create forms there, I have a database table that I can link each field to, so I keep looking for how to link to the table and I can't figure it out.
View 9 Replies
View Related
Jan 16, 2014
I'm currently running this macro:
VB:
Sub CopyNextTab()
WorkbookName = ActiveWorkbook.Name
Cells.Select
[Code]....
I'm not entirely sure if this is correct, but what I'm looking to do is the following:
1. On the currently selected sheet, copy all data into the "Pasted Data" sheet on "Test.xlsm"
2. On the "Calculations sheet", copy all information across to the next available row on "Master Sheet"
3. Select the original Workbook and move to the next tab
4. Repeat until there are no more tabs remaining
So far as I can tell steps 1-3 are working (however I'm not entirely confident with my code to move to the next sheet as I'm not sure it will end the sub on the last sheet).
View 5 Replies
View Related
Jul 8, 2014
I have a loop function that goes through a list of employees and i want to move their name to a different sheet(monday, tuesday...) so that I know who is in on what day. is there a simple way to have it add the next name to the bottom of the list?
View 3 Replies
View Related
Apr 21, 2008
I would like to loop through all spreadsheets in a folder, copy sheet "january" from each spreadsheet into a mastersheet. No idea how using vb all help appreciated.
i would like to change the name of the sheet to a cell reference before it gets pasted into the new sheet.
View 14 Replies
View Related
Feb 20, 2014
I work for one half of a joint venture & am responsible for planning & expediting. The other half does purchasing. The bi-weekly PO download reports I receive are less than useful. I have already written the code to delete undesired sheets & add, format, and enter headers for a "Summary" sheet.
I need code to move to the next row, and run formulas to pull data from the next sheets, and repeat until there are no more sheets.
The number of sheets will vary from one download to the next, and the sheet names will vary from one download to the next.
Following are example formulas that need to be run on successive rows while pulling from successive sheets.
I am running Excel 2013 on Windows 8.1
View 14 Replies
View Related
Aug 27, 2012
I need VBA code for the following - I have a worksheet with seven colums of data (A to G) - I need to copy the first column (A) from the active worksheet then open master workbook called 'master' and paste the data in to column D - then save the 'master' as the name in cell Z1 of the 'master' workbook. Once this has been been completed I need to repeat the process but this time copying column (B) and so on.
View 4 Replies
View Related
May 20, 2014
I have a worksheet that contains 3 columns, A, B, C, that I need to run through auto-filter and copy the results from a cell, F2, into another sheet each time the filter criteria changes.
Although the worksheet will contain over 11,000 rows (the attached sample file is trimmed down to around 1000 rows),
Col A will only have 8 different possible criteria for autofilter: 1,2,3,4,5,6,9,10
Col B has around 70 criteria, and Col C has around 700 criteria.
The number of rows in the sheet and consequently the auto-filter criteria will likely change each time (but will usually hover around these quantities).
As an example, here is how I would envision this working for Col C:
1. Starting on the 1st Sheet (named "FW15"), I auto-filter Col C on criteria/value 1
2. I copy the resulting value from Cell F2 of sheet FW15 and paste it into the first empty cell of Col C in Sheet 2 (named "CopiedResults")
3. I return to my first sheet, FW15, turn off the enabled filter for criteria/value, and turn on the next autofilter Criteria/Value of 2
4. Repeat Step 2
.
.
.
Keep looping through Col C to make sure that all auto-filter values have been applied, and all resulting values contained in Cell F2 are copied over to the second sheet.
Likewise, I would need to run through the auto-filter criteria in Col A and Col B, and copy their resulting values (from cell F2) into Sheet2 Col A and Col B.
Attached workbook : autofiltercriteria3.xlsx
View 2 Replies
View Related
Mar 19, 2014
Win7/2010
I have an array PeopleList(6,320) that contains
PersonID, FirstName, LastName, Email, Phone, Notes
What I'm trying to do. I have two separate requirements:
(1) To add the whole array to a listbox on form initialization - see Sub UserForm_Initialize()
(2) To clear the listbox and re-add only certain items based on what's typed in a textbox - see Sub txtSearchTerm_Change()
I have two errors:
Error 1 in UserForm_Initialize()
The listbox contents need transposing! It is displaying as
Code:
1 2 3 4 5
Tom Ben Heidi Julie Mark
Smith Jones Evans Simpson Petersen
x@yo.com a@bo.com c@do.com e@fo.com g@ho.com
02071001022 02071001026 02071001027 02071001028 02071001029
Friend
When it should be displaying as
:
Code:
1 Tom Smith x@yo.com 02071001022 Friend
2 Ben Jones a@bo.com 02071001026
Is there a way to transpose the array?
Error 2 in txtSearchTerm_Change()
I cannot find anywhere - even on MSDN - all the information I need how to correctly add a single record to a multiple-column listbox! What I'm trying is:
Code:
For i = 0 To UBound(SearchList) If InStr(1, SearchList(i), SearchTerm) 0 Then
With lstPeople
.AddItem
For j = 0 To UBound(PeopleList, 1)
.List(c, j).Value = PeopleList(j, i)
[Code] ......
How do I add a record to the listbox????
Full code for reference:
Option Explicit
Private PeopleList As Variant
Private SearchList As Variant
Private Sub UserForm_Initialize()
[Code] .......
View 5 Replies
View Related
Apr 11, 2002
Input Workseet:
Col A: Date
Col B through M: Headings are employee names, data is how many hours of vacation per DATE.
User will enter a date in column A, and then the corresponding number of vacation hours a person took that day. There are a dozen or so employees, so we're only entering a record on the dates that someone has taken vacation time. Dates are mm/dd/yyyy format. The hours are number/two decimals.
What I would like:
An update command button (hey, I can actually do that part!) that has an on-click that:
Loops through each column B through M, and copies the information to the employee's individual sheet.
The individual sheets:
Columns are:
A = Date of vacation
B through M are months Jan through Dec.
Data starts *paste* in cell A12, where the date of the first vacation day they take should appear. If it was a half-day in February, .5 (or .50) will appear in cell A14.
If it's not clear, I'm happy to send the file! If you put your email here, I'll send it right away. If you email me at home, it'll be a few hours before I can send.
No rush on my part.
Really appreciate it!! I'm not a coder. I know small bits and pieces. When you start talking about Dim, I think of chinese food.
_________________
TheWordExpert
[ This Message was edited by: Dreamboat on 2002-04-11 10:20 ]
View 9 Replies
View Related
Mar 14, 2014
I have an excel worksheet that has data in columns BA:CX. I want VBA to cut the data from the last row in the worksheet BA:CX and paste the data in the row below it's current location starting with column C:AY. I want to repeat the process for the next row up, etc. all the way until I get to BA:CX in row 2.
View 4 Replies
View Related
Jun 5, 2013
I have an issue to where I have my worksheet entitled "Index Data" as my output. I need to loop multiple worksheets to copy cell D2 and copy onto worksheet "Index Data" in column B.
It should look similarly to this:
VB:
Sub Range("D2").Value = myinput1
For Each ws In Worksheets
[relevant code]
Next ws
End Sub
View 2 Replies
View Related
Nov 5, 2008
I'm trying to copy data from multiple spreadsheets into one summary spreadsheet. Each spreadsheet that I'm looking to copy data from is stored within a folder, named as a date, within a sharepoint site.
Each report is named as 'Report to PMT from Vauxhall', 'Report to PMT from Ford', 'Report to PMT from Fait' etc etc. and the format of each report is exactly the same.
From the attachments you will see that I'm trying to copy the following from the Report to PMT from Vauxhall to Summary Report:
Report to PMT from Vauxhall Cell D11 to Cell D19 of the Summary Report
Report to PMT from Vauxhall Cell E11 to Cell D19 of the Summary Report
Report to PMT from Vauxhall Cell F11 to Cell D19 of the Summary Report
Report to PMT from Ford Cell D11 to Cell D20 of the Summary Report
Report to PMT from Ford Cell E11 to Cell D20 of the Summary Report
Report to PMT from Ford Cell F11 to Cell D20 of the Summary Report
etc. etc.
View 14 Replies
View Related
Aug 11, 2009
I am having trouble creating a macro for an excel file I am working on. I do not have much experience writing macros, so I apologize for any confusion. I have created a simplified version of the file I am attempting to write a macro for and attached it to my post here.
At this point it would be helpful for you to open up the attached file so that you can understand my explanation.
Basically what I want the macro to do is:
1. Match up "Product" on Wksht(Input) with "Product" on Wksht(Data).
2. Copy the "Usage per ton" and "Dollars per ton" values corresponding to the given product from Wksht(Input) to Wksht(Data) for the correct month. (The user will manually enter the month, ie "August 09" into Wksht(Input) each month when he runs the macro.)
++The color fills will not exist on my finished macro. I only put them there to illustrate the values that will be copied and pasted.
I want the macro to be written with Loop commands so that it will check to be sure the product number matches with the given location for pasting the data values. I should also note I use PasteSpecial_Values because of the formulas in the cells on Wksht(Input).
View 12 Replies
View Related
Mar 18, 2014
I have created a excel workbook in which I use for keeping up with storage unit rent. I have a tenant list sheet and each tenant has a sheet on which I keep up with charges and credits. What I want is a macro the will loop thru each tenants sheet based on tenant list and insert data and go to the next sheet. I found this on the web:
[Code] ......
View 1 Replies
View Related
Feb 7, 2008
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
View 3 Replies
View Related
Nov 24, 2013
I am trying write code withVBA to save separate file in a different folder with Loop.
Write a code with "loop" till it finds empty cell in the column and for every change in number a separate file needs to be saved in specified folder with file name as "10010, 10011,10012... and so on with data copied in the file saved.
Below is the data.
10010
10011
10011
[Code] ....
View 6 Replies
View Related
Jul 1, 2012
i attached link to sample and its contains employee sheets and Report sheet ,and in Report sheet there is comment
[URL]
View 7 Replies
View Related
Apr 18, 2009
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
View 8 Replies
View Related
Oct 2, 2007
I have tried to copy and use code within this forum to run a macro when a cell value on a worksheet changes to a number 5. The macro that is called, should copy selected data and paste it to the next available cell in another worksheet in the same work book. The macro itself runs as soon as the cell value changes to a number 5 but it does not stop and keeps pasting the same information over and over.
I thought I was finally starting to get the hang of these macros but once again I was proven wrong. I've attached the workbook below. My goal is to have a user fill in the boxes on the entry sheet. Once all 6 yellow cells obtain data, for the macro to copy the data into sheet 3 at the next available blank cell, reset the yellow boxes and re run the next time all 6 yellow boxes obtain data.
View 2 Replies
View Related
Aug 12, 2013
I am trying to set up payment record sheet as follows
First Tab: This is the total value of each item, with the payment date in cell C1
Second Tab: Is the payment date of the item
Third Tab: Is the payment due tab
So what I want to do is enter the payment in C1 on the first tab. Then on the second tab I want to enter all the items that want paying on that day, but this will also have previous payment dates shown as a sort of record of what was paid on what day.
On the third tab I want it to show all the payments that correspond to the same date as C1 DATEVALUE
And on the gross tab I want to show all payments to date including the current date.
I have got the payment date to work but I cant get it to show all the previous values.
View 1 Replies
View Related
Jan 21, 2007
I have a code... and I am trying to use it with a different file.
The files is set up the same, the code has been unedited, but it's not working
Sub findAndReplace()
Dim ws1 As Worksheet
Dim ws2 As Worksheet
Dim searchFor As String
Dim searchCol As Range
Set ws1 = Sheets("SBK") 'sheet for which we look in column A
Set ws2 = Sheets("Sheet1") 'sheet we try to match with column E
'last row on the sheet with the updated information
lastRow = ws1.Cells(ws1.Rows.Count, 1).End(xlUp).Row....................
I want it to look in SBK at column A and match it to column E of Sheet1. Then copy collumns DEFG from SBK to DEFG of sheet1.... Is there some reason it's not doing it?
View 14 Replies
View Related
Jan 7, 2009
Once again I need your help to solve my problem. I have attached one zip file which contain 2 excel file.
1. Master.xls
2. Corporate Documents Master file- Till DEC 08.xls
What i need to do is that ? i need to execute the macro from master.xls. The macro need to ask the input file, the input file will be 2nd excel file.
Based on the "TAG" column value in the master.xls file it need to check that value exist in the second excel (Corporate Documents Master file- Till DEC 08.xls) column "INVESTOR'S NAME" for example :-
If it check for TAG value :- PVT LTD
Matching Record will be :-
Record 2, 7 , 14 ... etc.
A column need to be inserted next to it and name it as "NEW INVESTOR'S NAME", What ever record matches need to remove the TAG value eg. "PVT LTD" from that name and copied to the "NEW INVESTOR'S NAME" and high light that changed field with red colour. The record which doesn't contain any TAG value mentioned in the master.xls file need to be moved like that to "NEW INVESTOR'S NAME"
After that we need to sort column "FOLIO ID"+ "NEW INVESTOR'S NAME"+"Documents", if you find any similar record we need to move all the record it new sheet we name it as "Similar Records" leaving one record in "Corporate Documents Master file- Till DEC 08.xls" sheet. In "Similar Records" sheet at end we to add on column name "Master Record Row Number" there we need to enter the row number where that similar record in the "Corporate Documents Master file- Till DEC 08.xls" sheet.
For eg :- .....
View 14 Replies
View Related
May 31, 2007
I have a workbook which uses a Worksheet named MainSheet. Data is stored in Cols A to AE starting at Row 6 to last entry (Records are added daily)
A date field ( DD/MM/YYYY), is in Col H (Installation Date).
I need a macro which look at the DATE field in the MainSheet and COPY ONLY records that are 2 DAYS greater than TODAYS date.Into a worksheet
named RemindDate.
View 9 Replies
View Related
Apr 29, 2008
I have a sheets called " Records" that contains a table with columns E to to AE, rows begining at E5. Each column is it's own attribute and the table in question will have records added to it in the future, so the search would need to include the possibility. What I am trying to do is search only a small range of those attribute columns for a particular text but I want to display all the attributes of the records that meet the search criteria (I hope that makes sense!) So far I have the below code (found on this forum previously), but it searches all attributes columns rather than just the ones I want to search, and I am willing to try something else completely different!
Public Sub search_flights()
Dim My_Result As Variant
Dim first_Result As Variant
Dim Flight_Number As Range
'clear search results
Worksheets("Search").Rows("11:" & Rows.Count).ClearContents
Set Flight_Number = Worksheets("Search").Range("C7")
'check data
If Trim(Flight_Number.Value) = "" Then
MsgBox "Please Enter a flight number in Cell C7"
Exit Sub
End If.....................
View 5 Replies
View Related
Jan 15, 2009
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
View 13 Replies
View Related
