Copy Cell Contents From One Sheet To Another Within A Loop
Jul 8, 2014
I have a loop function that goes through a list of employees and i want to move their name to a different sheet(monday, tuesday...) so that I know who is in on what day. is there a simple way to have it add the next name to the bottom of the list?
When Complete repeat until it reaches the end of column A
Since my Cells are populated by all the data in the workbook I thought at the end of my copy script I would take the next Cells data in A and put it in Cell H8 where all the constants are for the file names.
I have a line of code that returns a run-time error 1004 whenever it is passed through. All I am trying to do is copy and paste. I am missing some glaring error? (It is only a selection of the code to highlight the part I am having issues with. "maxdate" and "d" have been set)
VB: Dim ws, ws1 As WorkSheets Set ws = ThisWorkbook.Sheets("Data") Set ws1 = ThisWorkbook.Sheets("Target")
I need VBA code for the following - I have a worksheet with seven colums of data (A to G) - I need to copy the first column (A) from the active worksheet then open master workbook called 'master' and paste the data in to column D - then save the 'master' as the name in cell Z1 of the 'master' workbook. Once this has been been completed I need to repeat the process but this time copying column (B) and so on.
I have a worksheet that contains 3 columns, A, B, C, that I need to run through auto-filter and copy the results from a cell, F2, into another sheet each time the filter criteria changes.
Although the worksheet will contain over 11,000 rows (the attached sample file is trimmed down to around 1000 rows),
Col A will only have 8 different possible criteria for autofilter: 1,2,3,4,5,6,9,10 Col B has around 70 criteria, and Col C has around 700 criteria.
The number of rows in the sheet and consequently the auto-filter criteria will likely change each time (but will usually hover around these quantities).
As an example, here is how I would envision this working for Col C:
1. Starting on the 1st Sheet (named "FW15"), I auto-filter Col C on criteria/value 1 2. I copy the resulting value from Cell F2 of sheet FW15 and paste it into the first empty cell of Col C in Sheet 2 (named "CopiedResults") 3. I return to my first sheet, FW15, turn off the enabled filter for criteria/value, and turn on the next autofilter Criteria/Value of 2 4. Repeat Step 2 . . . Keep looping through Col C to make sure that all auto-filter values have been applied, and all resulting values contained in Cell F2 are copied over to the second sheet.
Likewise, I would need to run through the auto-filter criteria in Col A and Col B, and copy their resulting values (from cell F2) into Sheet2 Col A and Col B.
Effectively I have a cell that contains the following data :-
63303-9600 63303-5280 63303-9700
What I need to do is loop through this cell and take the first 10 characters and ouput to a row, then take the next 10 characters and output to the next row and so on until it has been through all the cell content.
I need a macro to have the copy of selected cells on sheet1, and paste it on sheet2 of the same workbook, whenever I take the print of the sheet1. My requirement is that Each time when I take the print, the selected items get pasted simultaneously on next available cells on sheet2.
Example of my worksheet is attached : Example.xlsx
I have a userform in a workbook and depending on what selection the user makes from a combo box, I want the data to get pushed into the relevant sheet.
I did think I could get away with If Me.cmbtype.Value = "Tool" Then Set ws = Worksheets("Tools") ElseIf Me.cmbtype.Value = "Guide" Then Set ws = Worksheets("Guides") etc but its now not copying data into Tools if I selected Tool from cmbtype (but when I select Guide it does appear to work).
The rest of the code is the same regardless of what type they select from cmbtype, its just which sheet the data gets copied into that changes.
VB: Sub CopyNextTab() WorkbookName = ActiveWorkbook.Name Cells.Select
I'm not entirely sure if this is correct, but what I'm looking to do is the following:
1. On the currently selected sheet, copy all data into the "Pasted Data" sheet on "Test.xlsm" 2. On the "Calculations sheet", copy all information across to the next available row on "Master Sheet" 3. Select the original Workbook and move to the next tab 4. Repeat until there are no more tabs remaining
So far as I can tell steps 1-3 are working (however I'm not entirely confident with my code to move to the next sheet as I'm not sure it will end the sub on the last sheet).
I am trying to copy a column of cells from one sheet to another, but also want to keep all the formatting. The origin sheet has times, but when I copy these to the destination sheet they are displayed as decimal numbers (using the code snippet below). I can change these back to times by formatting the cells using the format painter after the macro completes but I would like the VBA to do this for me. (using 2002 SP3).
I need a way to copy part of contents from a cell, the cell contains product information like size, name and weight of a product, and I need a copy the weight to be put in it’s own cell, here’s a copy of one cell “E65 MAPP SKDV 5 DIGIT 90G ST.K” the information I need from this is “90” the number is always followed by a capital G, but it’s between two and three digits where the lowest is 55G and the highest is 300G. Is this possible?
I have 2 inventory reports: what my store has and what my supplier has. I need to copy Tab1:K# to Tab2:T# provided that Tab1:A#'s contents match Tab2:A#'s contents. The A column represents the SKU of the item, but there is a difference in the amount of SKU's in each (my store sells ~6,000 items, supplier has ~10,000 items), so it's not as simple as sort by column A and copy pasting column K to column T.
For instance: On Tab 1, A2's value is , K2's value is [9.38]. On Tab 2, A70's value is , K70's value is blank, but I need it to be [9.38], to match Tab 1's respective SKU.
I almost thought I had it figured out with VLOOKUP, but I cant seem to get it right... It doesn't reference the correct number.
Screenshots for reference
First tab, from the wholesaler: [URL] Second tab, store's stock: [URL]
In the first worksheet, called "Overall Totals", I have only two cells utilised (A1 and B1).
The first cell contains the name of one of the other worksheets. This may change, in order to reference other local worksheets.
The second cell should use the value contained in the first cell to go and get a particular piece of data from the other worksheets.
So, for example, if the first cell (A1) in "Overall Totals" contained the data "SheetName 1", and the data we wanted to get from that sheet would be cell F12 from that sheet, then I would expect the second cell (B1) in "Overall Totals" to say something like.
if I was hardcoding it. But I don't want to hardcode it, as the value in A1 could change, and I'd have to re-change lots of hardcoding.
I am working with a spreadsheet that has our user data; User(First) Name, User(Last) name, Computer Name, MAC address, Phone Number, Seating Position and Network Port Number.
I have let this get horribly out of sync, moved computers around, and moved them while the MAC address column was hidden, As a result, I have a bunch of users listed as being at the wrong computer. I have a second spreadsheet I generated that gives me the logged in user for about 2/3 of my computers, with the computer name(Just 2 columns, 'A' and 'B'. I would like to have Excel match the computer name and then overwrite the user name. For example, if the first computer in my correct user list is DELL-99945ty2, and the user name is "Jimbo Jones", I would like it to search the first Excel doc(The one with all of the user data), and replace the user name with "Jimbo Jones". Is this simple and straightforward?
In my main spreadsheet, the user name is in column B and the computer name is in column G, So I want to use the values from Column B in my second document to find its match in Column G of the first spreadsheet, and then replace the data in Column B with Column A in the first spreadsheet.
Basically lets say I have in cell A1 to A10 floor access data i.e. Users who used their ID cards to access a room.
Now the data always starts with either Rejected or Admitted then the user's name and then the card number and the access floor etc. the card currently has.
What I am looking for is that the macro should first check if the cell has Rejected or Admitted written in it - this I can do myself using =Left(A1,8) which should give me the helper column I need.
Then based on this I want it to only copy the name of the individual i.e. it should look in the cell and only copy whatever is written between "Rejected" and "(Card". The cell data is something like this:
Rejected Doe, John (Card #123456) at ABC 123 Floor1/Floor2/Floor3/Floor4 Door 1 [In] [Clearance]
I have an Excel invoice set up and working well. It does a bunch of things with macros - e.g. on save it increments the invoice number well as creates a jpeg screenshot for the invoice archives. I have added an additional worksheet (titled 'VAT') to the workbook. The new 'VAT' worksheet has five simple columns; Invoice no, Subtotal, VAT, M.O.T. and Total.
What I need:- On saving the workbook I would like to add a macro function that copys the final contents of the Invoice no (H2), Subtotal (C37), VAT (C38), M.O.T. (F38) and Total (I38) cells from the 'Sales Invoice' worksheet to the newly created 'VAT' worksheet in the respective columns. I would like this to be cumulative, i.e. continue to add the contents of the afore mentioned cells to the appropriate columns in the 'VAT' worksheet every time the invoice is saved. I would also like to have the Subtotal, VAT, MOT and Total columns summed and outputted in a cell of their own - but hopefully I can handle that.
I have a formula that looks at a cell on a front sheet, and then returns the contents of that cell as the result if it meets the criteria. So for example this formula would be in Cell A1 on Sheet2 IF(SHEET1!A1,"New",Sheet1!A1,"-")
This formula is always in the same cell (different sheet) as the cell that it is looking at, down 1500 rows. Instead of having the formula named for each cell is there anyway to ask excel to 'look at this cell but on this other sheet'. e.g IF(Sheet1!"This Cell" etc). That way no matter what cell you put the formula in it is always referencing the correct cell for the formula?
I have a worksheet where columns C, F, I, L, O record scores within a league. Each row records a persons score in that league and there are two rows per person recording their score and their handicap score. So Person A would be on rows 3, 4, Person B on 5, 6 etc. The persons name is recorded in Column B.
What I would like to do is to have a cell(s) elsewhere in the worksheet which show the highest score in that league and display that score and the name of the person who achieved it. This ideally would need to be done for the highest score and the highest handicap score.
For the life of me I can't even begin to work out how to do that or even know if it is possible in Excel.
So to clarify, lets say the highest score is in cell L7 and the highest handicap score was in M3. The cell(s) containing this formula should then show the name in B7 and the score in L7 and below it the name in B3 and the score in M3.
I have contacts list that I made and want to take it to the next level, but don't know how. See attached.
The goal: 1. Highlight an entire row of someone's contact info (i.e. row 9) 2. Click the "ORDER FORM" text box to activate a macro that populates specific cells on the 'order form' sheet with the customer's contact information from the highlighted row. The information I want copied over is in red on the order form sheet. THAT'S IT!! (Oh, and 'paste value' the current date from H5 so that the date is static on the order sheet
If possible, I would like to have an error check in case no row is selected prior to clicking on the text box that pops up the note "Please highlight a contact row before clicking the 'Order Form' button."