I have a simple macro with a loop which selects sheets in a workbook. sheets are named "Sheet 1" to Sheet 6". Two sheets are missing (say sheet 3 and sheet 5). The On Error code works when the macro tries to find sheet 3 but crashes on the second error (when it tries to find sheet 5).
Sub SelectSheet()
For i = 1 To 6
MySheet = "Sheet" & i
On Error Goto 10
Sheets(MySheet).Select
10
Next i
End Sub
I have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop()
'
' Loop through an indexed number of worksheets; _
' & this ensures that the worksheet range is dynamic _
' and is able to adjust when new sheets are added/removed, etc.
'
'Dim ws As Worksheet
Dim i As Long
Dim ws As Worksheet
[code]....
Just need to delete some hyperlinks in column A on 50+ worksheets. Thought a loop through all the worksheets would do it. Only works on active sheet. Forgive my ignorance, don't really even know where it goes, once it works - module or workbook?
View 2 Replies View RelatedI'm trying to perform the same process to all the worksheets in my workbook. This is the code I have now, but it will only apply to the single active worksheet:
View 2 Replies View RelatedI have a number of sheets in my workbook which I'd like to run the same code against. Rather than calling each by name is there a way to define each sheet as an array number and use that to loop through?
For this example we'll use Sheet1, Sheet2, Sheet3 and Sheet4
I am trying to loop the following code for a total of 15 worksheets without copying and pasting that same code 14 more times for each worksheet. Right now it is only executing the code on the "CAN" tab. Is there a way to make it loop where indicated below?
The 15 worksheets are:
CAN
USA
ASG
Gallia
[Code]......
I’m trying to copy some data from each sheet in WorkbookA, except for the first sheet which is called “Menu”, into a single sheet in WorkbookB. I’m trying to loop through the worksheets in WorkbookA but don’t know how to exclude the first sheet. The code for copying and pasting works fine. It’s just the looping (as always) I’m having trouble with. The code I’m trying is:
View 2 Replies View RelatedWhy wont this loop thru all worksheets? It seems it runs worksheet named "Monday Wk (1)" for each sheet and no others.
View 9 Replies View RelatedNot sure what is missing here, but this will only highlight duplicates on the active sheet and won't cycle thru all worksheets in the workbook.
View 2 Replies View RelatedCode to complete the same task across a number of worksheets.
Basically I have 20 Worksheets currently. The first one is called "index", then I have 17 called App1, App2, App3 etc up to App17 and a final two called Collate and register.
What I want to do is to copy cells A2:E2 from App1 and paste it in the next blank row of "index". I then want to do the same in App2 and so on to App17 and then stop. I don't want it to do the same in index,Collate or Register.
in the past i have used something like (this is from something else I am using at the moment)
HTML Code:
Sheets("App1").Select
Range("a2:e2").Select
Application.CutCopyMode = False
Selection.COPY
Range("a1").Select
Sheets("index").Select
Range("a2").Select
ActiveSheet.Paste
[Code] ....
Is there a way without having to write code for each sheet (which seems very inefficient) to complete the same task but ignore the three other tabs.
This macro should copy all data from all worksheets and past them into the sheet named "Consol" however It is not looping and only pastes the one sheet.
Sub LoopThroughSheets()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
Formula
FinalRow = Range("A65536").End(xlUp).Row
Range("A2:U" & FinalRow).Copy
[code]....
I have over 200 worksheets in my workbook. I made a macro to have the sheet change to landscape orientation and adjust the column widths how I wanted them. I don't know how to make the macro loop to all the sheets in the workbook.
Sub Macro5()
'
' Macro5 Macro
'
[Code].....
I have a worksheet ("Issues Report"). Based on the value in column A, I'm trying to cut the entire row and paste it on another worksheet ("Closed Issues").
Here's what I've written so far:
Dim C As Range
Dim xlSheet As Worksheet
Set xlSheet = Worksheets("Issues Report")
Set C = xlSheet.Range("A:A")
With xlSheet
For Each cell In C
If cell.Value = "Ready to Close" Then
ActiveCell.EntireRow.Select
Selection.Cut
Worksheets("Closed Issues").Range("A65536").Select
Selection.End(xlUp).Paste
End If
Next cell
This seems logical to me, but it's not working as planned. The code gets hung up on the 11th line of code.
Trying to write a macro that will reference one cell in about sixteen different worksheets and return the value of each of those cells. Is there an easy way to do this?
ie.
For n = 1 To n = 15
Worksheet(n + 1).Cell("A1")
Return A1
I know this isn't even close to the right code but this should give you an idea of what I'm trying to do.
I want to loop through all worksheets and sort all columns in each worksheet. Here is what I have, but for some reasson, it only sort the first sheet. Any suggestions?
Sub test2()
Dim ws As Worksheet
For Each ws In Worksheets
Cells.Select
Selection.Sort Key1:=Range("E1"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Next
End Sub
I want to declare and 'Set' a number of worksheets for later use. Like this ...
View 9 Replies View RelatedI have a piece of code from a form command button. its supposed to colect data and put it to appropriate cells.
VB:
FoundColumn = 0
For Each c In Sheet19.Range("A5:A33").Cells
If c.Value = student1.Value Then
'check if date allready exists
For Each cc In Sheet19.Range("c4:nc4").Cells
If Calendar1.Value = cc.Value Then
[Code] .....
I need this for Sheet19 and to 10 more worksheets like Sheet20, Sheet21 etc. I can manually copy paste the code and change the Sheet19 to whatever but it just does not seem the right thing to do. I tried:
VB:
For i = 1 To 6
naming = "Sheet" & i
MsgBox naming.Cells(1, 2).Value
Next i
but that gives an object required error.
I have been trying to create new worksheets, name them and create webquery according to the input on table B4:C13 in test1 sheet attached (code is in module 1). After I run the code it stops after creating sheet with name 1 and shows error 1004. here it is the
View 8 Replies View RelatedI'm trying to insert two rows in a subset of worksheets in a workbook by defining a range in a worksheet and loop through the worksheets in that range, but the code will only run on the active worksheet.
[Code] ..........
How I could get this loop to work?
I've got a data set (words and text) where in column J the number 100 appears at random intervals. Each time the number 100appears, i want to take all data from cell A:J and copy that data to a new worksheet and then name it with the word in cell A.
View 7 Replies View RelatedI am trying to perform certain actions on just some worksheets in a workbook. I realize this is probably a simple thing, but I've been unsuccessful in my search of the web so far.
What I'd like to do is define the worksheets (i.e. "in worksheets" below) in the below code to only include a list of worksheet names (which I can provide - ideally via a list in the worksheet in Excel, say in cells A1:A15 of a tab called "Tab List".).
I am trying to create a loop to add multiple worksheets
I want to add a new sheet for each company (A2:A14)
I am also wanting to add the sheets after the current last sheet if possible.
Sub addnewsheet()
x = 2
Do Until Cells(x, 1) ""
Sheets.Add.Name = Worksheets("securities").Cells(x, 1).Value & ".ax"
x = x + 1
Loop
End Sub
I am trying to do payslips. Basically I have one worksheet with about 7 columns. I have a 2nd worksheet that is like a template payslip.Worksheet 1 has hours worked and pay etc.
I want to find a method to loop through worksheet 1 and using worksheet 2 as a template create more worksheets and have the values come from worksheet 1 in the new worksheets.
I'm trying to insert two rows in a subset of worksheets in a workbook by defining a range in a worksheet and loop through the worksheets in that range, but the code will only run on the active worksheet.
Sub StatePIPData()
Dim sheet_name As Range
For Each sheet_name In Sheets("WS").Range("A:A")
If sheet_name.Value = "" Then
[Code] .......
I'm trying to loop through all the worksheets within a workbook. The first sheet is called Instructions and the last sheet is called Sheet 1.
I would like the macro to go through and populate the pricing for each part using a v-look up in cell C6:bottom of data based on the parts in column A for each country. The macro would then end on Sheet 1.
My Vlookup would be in a source file with the same name as the current worksheet and the data would be in columns B (part) through column F (price)
Here is what I've done so far.
Code:
Sub Pricing()
MSGtext = "Open the Price Doc."
MSGbutton = vbOKCancel
[Code]....
I am attempting to create a macro that will loop through a range, each cell of which contains a worksheet name which needs to be activated in turn. My limited knowledge says that either of the two techniques below should work, but they do not.
Sub SelectSheet()
For i = 2 To 50
Sheets(Range(("J" & i))).Select
Next
End Sub
OR
Sub SelectSheetv2()
For i = 2 To 50
Sheets((Cells(i, 10))).Select
Next
End Sub
I have an issue to where I have my worksheet entitled "Index Data" as my output. I need to loop multiple worksheets to copy cell D2 and copy onto worksheet "Index Data" in column B.
It should look similarly to this:
VB:
Sub Range("D2").Value = myinput1
For Each ws In Worksheets
[relevant code]
Next ws
End Sub
I am using this RDB code to send a fixed range to a fixed recipient in the body of an email, but I would like to set it to run for all worksheets.
[Code] .........
I'm trying to loop through worksheets as follows:
If ws.Name "DataTable" And ws.Name "Summary" Then ws.Activate
code to do some copy/paste stuff ....
Next ws
Try as I may, I can't get the code to skip the worksheets named "DataTable" and "Summary". Based on other posts, I've tried swapping out the And for an Or. Also tried using LCase(ws.Name), to no avail. Note that I'm acually trying to skip several other sheets as well but only listed two here for simplicity.
I'm using Excel 2007.
i have a range of rows that change (could be 10-100) how do i loop the range to create new worksheets named for each row?
View 3 Replies View Related