I have a large data file with several different worksheets. In one cell I have a large set of individual numbers (i.e in the cell there is "123456 234234 939829") This value is my 'sample' number. The same sample could be in multiple rows on one sheet and could also be on other sheets. I am trying to find the sample in a column (on some sheets its column "Q", other sheets it could be different columns, but that column is fixed per sheet) and then copy the information on the same row in columns A & B and copy it to my target sheet. Then the next place the sample appears copy that info to the next row of my target sheet. So far I am stuck getting it to find the multiple values on one sheet. My code is below.
Code:
Sub Samplesearch()
Dim sample As String
Dim x As Integer
Dim y As Integer
Dim lr As Long
Dim lsr As Long
I am having trouble creating a macro for an excel file I am working on. I do not have much experience writing macros, so I apologize for any confusion. I have created a simplified version of the file I am attempting to write a macro for and attached it to my post here.
At this point it would be helpful for you to open up the attached file so that you can understand my explanation.
Basically what I want the macro to do is:
1. Match up "Product" on Wksht(Input) with "Product" on Wksht(Data).
2. Copy the "Usage per ton" and "Dollars per ton" values corresponding to the given product from Wksht(Input) to Wksht(Data) for the correct month. (The user will manually enter the month, ie "August 09" into Wksht(Input) each month when he runs the macro.) ++The color fills will not exist on my finished macro. I only put them there to illustrate the values that will be copied and pasted.
I want the macro to be written with Loop commands so that it will check to be sure the product number matches with the given location for pasting the data values. I should also note I use PasteSpecial_Values because of the formulas in the cells on Wksht(Input).
Code to complete the same task across a number of worksheets.
Basically I have 20 Worksheets currently. The first one is called "index", then I have 17 called App1, App2, App3 etc up to App17 and a final two called Collate and register.
What I want to do is to copy cells A2:E2 from App1 and paste it in the next blank row of "index". I then want to do the same in App2 and so on to App17 and then stop. I don't want it to do the same in index,Collate or Register.
in the past i have used something like (this is from something else I am using at the moment)
I have over 200 worksheets in my workbook. I made a macro to have the sheet change to landscape orientation and adjust the column widths how I wanted them. I don't know how to make the macro loop to all the sheets in the workbook.
I have a workbook with over 70 tabs whose position shouldn't be changed. Some of these tabs are colored in yellow (sorting by tab color is not allowed). I need to select these yellow tabs first and loop through them (only yellow tabs) and hide empty rows in the range of A1: G 50 on each of them. Grouping sheets wwon't work because each tab has different last row with data within that range.
I have an issue to where I have my worksheet entitled "Index Data" as my output. I need to loop multiple worksheets to copy cell D2 and copy onto worksheet "Index Data" in column B.
It should look similarly to this:
VB:
Sub Range("D2").Value = myinput1 For Each ws In Worksheets [relevant code] Next ws End Sub
I have a sub that will join the text together from multiple columns into one cell but it only works for one row. I would like it to work through the rows selected. How do I do this?
Sub JoinText()
myCol = Selection.Columns.Count For i = 1 To myCol ActiveCell = ActiveCell.Offset(0, 0) & ActiveCell.Offset(0, i) ActiveCell.Offset(0, i) = "" Next i
I have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop() ' ' Loop through an indexed number of worksheets; _ ' & this ensures that the worksheet range is dynamic _ ' and is able to adjust when new sheets are added/removed, etc. ' 'Dim ws As Worksheet Dim i As Long Dim ws As Worksheet
Just need to delete some hyperlinks in column A on 50+ worksheets. Thought a loop through all the worksheets would do it. Only works on active sheet. Forgive my ignorance, don't really even know where it goes, once it works - module or workbook?
I'm trying to perform the same process to all the worksheets in my workbook. This is the code I have now, but it will only apply to the single active worksheet:
I have an excel file with over 20 worksheets and each of them have around 1200 rows. The first column in each worksheet contains the variable names and then the data associated to it is present horizontally.
I only want to keep around 80 rows from those 1200 rows. They are not in sequence (means they are not in continuous order) so I manually selected those rows by deleting the non required rows step by step.
I did it manually on 2 worksheets but I don't want to do that manually over 20 worksheets. Is there any method that can speedup the whole process.
to get the code myself but nearly smashed the computer , then been searching for hours for the answer and still no luck, so last resort, to what I bet is an easy solution.
I'm building a spreadsheet and want to create a macro that will copy a row to another spreadsheet, and continue repeating this until it reaches a blank row and then stops the macro. For example:-
Row 1 contains Anna Row 2 contains Ben Row 3 contains Clive Row 4 contains nothing
I want excel to copy rows 1, 2 and 3 to another workbook but once it reaches row 4 it realises it's reached the end of the list. (The list won't always be three rows but will be continous)
I have a multiple of command buttons that I want to make visible. I have the following code which I am trying to get to work. Maybe I am barking up the wrong tree.
I have a spreadsheet that has a lay out like below
A A A * A A * A A B B B * B B * B B
and so on where every letter is a new cell and * = empty cell
I need a peice of code that will highlight all of section A. Section A could have 1 row or an infinate number of rows.
What I need is like a peice of code that means that it will start selecting rows starting from "A3" which is the 1st cell with data and stop selecting rows when the next row has data in the A column.
I have a workbook that has several sheets in it with various rows of data on each sheet. I would like to have a macro to loop through all the sheets in the workbook and copy and paste the rows into a new summary sheet. The rows to be copied should only have data in Column A, in other words if Column A of a row is blank I want it skipped. Also Row 1 of every sheet contains my headers, and I am only using columns A through M. It needs to be able to copy rows even when autofilter is in use.
There are 2 buttons on my worksheet below each other. Each button has a size of a range (i.e. "G33:G34", "G36:G37").
This is what I would like to do: 1. Click on the first button 2. Copy A33:F42 and insert them below row 33 3. Move the buttons to the same position (10 rows down) on the sheet 4. Copy the existing buttons and put them in their original space (i.e. "G33:G34", "G36:G37") 5. Do it as many times as I click on the first button
I have this, and I have no idea to the remaining part...
Private Sub CommandButton1_Click() Range("A33:F42").Select Selection.Copy Rows("33:33").Select Selection.Insert Shift:=xlDown Application.CutCopyMode = False Range("B33:B42").Select End Sub
I have multiple sheets with the same format.(all columns have same format) in column "A" i have a value lets say "B1-1".
What I need to do is to copy from all sheets the rows containing in column "A" the same criteria("B1-1") to a new sheet and skip the rows that have a blank cell in Column "A".
I worked on a workbook which has multiple worksheets( mine has 6). The data doesn't start from A1. I want to copy the data from each worksheet into a sheet called summary. I want to create the macro that would only copy the heading row once.
I have a workbook that has 5 worksheets. Worksheet1 is the Summary tab, Worksheets 2-5 contains data all sitting under the same headings and formats however vary in row number e.g.
In Worksheet 1 Column AQ contains a Cost Centre number which I would like to extract the parent description of in Column BI of the same Worksheet and then the child description into Column BJ. Worksheet 1 currently has 16000+ rows and grows daily.The location of the Cost Centre in Worksheets 2-4 is contained in Column A and the Parent Description in Column W and the Child Description in Column Y.I am currently using this INDEX MATCH formula to search all worksheets but as you can imagine it's tediously slow and needless to say sometimes not reporting/updating the values correctly likely because it's frozen.
=VLOOKUP(AQ2,INDIRECT("'"&INDEX(Sheet1!$A$1:$A$4,MATCH(TRUE, COUNTIF(INDIRECT("'"&Sheet1!$A$1:$A$4&"'!A2:A63355"),AQ2)>0,0))&"'!A2:W63355"),23,0) this looks up Cost Centre in Worksheet 1 Column AQ and returns the results from Column W in Worksheets 2-4 to Worksheet 1 Column BI
I have Master sheet where I collect info from sub sheets. All sheets are similarly formatted, ie. product numbers on column A and headers on row 2. I need to sum values from all sheets based product number and header. Master sheet includes all product numbers and some extra headers, sub sheets include only needed numbers. Headers on sub sheets are identical.
Currently I have this thing solved with following formula:
But problem with this is that column is hard coded, so I have to know that that value I am looking for is in column L. That wouldn't be show stopping problem on its own, but I have columns all the way to DR and copying formulas for each column takes a lot of time when I have to manually update each column. Just copying cell holds that L:L and doesn't change it.
So, in addition of getting values for specific product number I need to get values from specific column based on column header.
I'm trying to write a code to make a number of buttons visible depending on a cell value
I have 10 command buttons all are invisible and I want to show only the first x x is the value of cell "A1" in "Sheet1" (will be from 1 to 10)
Code: Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Range) Dim i As Long For i = 1 To Sheet1.Range("A1").Value CommandButton& i.Visible = True Next i End Sub
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code: for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row) if x = y then *storedRow = rowNum end if next rowNum *
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
I've a command button on one worksheet (named "Front") that when clicked it "resets" a large number of cells back to "."
I've ALSO a command button on another worksheet (named "Back") that when clicked it also "resets" a large number of cells back to "."
Both are embedded on their own VBA tabs.
Both work exactly as needed.
No problem.
Is there a way I can move the coding from both to the "This Workbook" VBA tab, leave the one command button on the "Front" worksheet, and eliminate the one on the back?
I'm kinda guessing that this will require my rewording the "(Range("C5").Formula = ".")" (example line of code for the first cell it resets on the "front" tab) to something specifically referencing the "Front" worksheet, and the same for the ones on the "Back", but I could be wrong.
