I have multiple sheets with the same format.(all columns have same format) in column "A" i have a value lets say "B1-1".
What I need to do is to copy from all sheets the rows containing in column "A" the same criteria("B1-1") to a new sheet and skip the rows that have a blank cell in Column "A".
I have data on a worksheet (“Interface”) that I need to copy over 7 other tabs for analysis.
("Module_1", "Module_2", "Module_3", "Module_4", "Module_5", "Module_6", "Module_7").
The linking Field on the Interface tab defines what row I need to paste the data to on Module 1-7. The column headers are the same on both the interface and other tabs (“YES, NO, N/A, BLANKS, STANDARDS MET, STANDARDS NOT MET, NOT APPLICABLE”)
The tab is selected based on the row
Module 1Medication Management
Module 2Privacy
Module 3Process
Module 4Patient Safety
Module 5Medical Records
Module 6Infection Control
Module 7Environment of Care
I’m trying to modify code written for a similar purpose with no luck. This is the code I'm trying to modify. I know I'm not on the right track yet.
I have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
I am trying to loop through a column and cut and copy cells containing one of ten or more criteria (text strings) to the next worksheet, which already exists.
The basic loop is set up, and I understand that an array for the multiple criteria is needed but am falling at this hurdle, as well as struggling with the routine to copy the row to the next available row on the next worksheet.
I have omitted to post my effort so far, as it's embarrassingly basic, but can anyone help with the code?
I have seen all kinds of copying routines, but haven't been able to get what I want.
1. Copy Row contents from activeworksheet
2. The activeworksheet will have various row counts
3. The activeworksheet has row 1 as header.
4. The criteria to use is in the current worksheet columns P through Z
5. The criteria to look for is the word inspect. only the word inspect, not words that contain inspect (i.e. "inspection") should not be found.
6. The word could be in column P and in S, but needs to be only copied once, becuase it has meet the criteria, but it also could only be in c
7. Copying the row into a Sheet named "Inspection"
As a bonus would be cool to be able to copy certain cells or the entire row.
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5?
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
I'm trying to sum across multiple worksheets based on a simple condition. I have a time sheet with a worksheet for each week (52 worksheets). I've gone back and added a column to code the type of work done, types 1 - 17. I want to sum the hours of each type across all worksheets. This is what I have that doesn't work:
View 10 Replies View RelatedI did a search to find a question similar to mine and I found this:
Copying data matching a criteria into another spreadsheet
This is exactly the same concept I am trying to accomplish, but don't know how to...at all. I couldn't follow the thread either.
I have a schedule which is constantly being updated (simplier version attached). I want to create a schedule, which will:
1) First ask which region to display the information for (I would like to create the same pop up menu to choose from)
2) Then, it will select only that region's information (all rows & columns) and copy them into a new worksheet and lists it all
-if you go back to the Master List, you can again choose another Region and it will create another new worksheet with that region's information
3) Don't know if this is making things more complicated, but at the bottom of the attached file, there are 3 lines under "Land".
Is it possible to list these under the same spreadsheet as the region it is pertaining to but classify it separately under "Land" (ie leaving space, so it is clear this is separate
Attach is a sample of my project. I have to loop through B9:B80 in sheet("Raw Data") and capture the value of each cell. EG:
* if Value captured is 120A --> check with sheet("SP14F") from the row which contains the same value.
* i have to check that the aperture, outer and inner values of Layer 120A and so on..of the Raw Data sheet is the same as that of in the SP14F sheet.
* if the values are not the same, change the font to red
i understand that this task requires looping and arrays.
I have a worksheet that contains 2 Rn managers per 3 Site and 2 TSR managers per 3 Site.
I want to be able to sort these managers by Site into 6 tabs: 3 RN tabs and 3 TSR tabs.
I want to keep the original worksheet as is and copy the appropriate rows to the designated worksheets labeled SACRN SACTSR VALRN VALTSR and so on. The data range is A:M
The columns of value is A (JOB) and B (SITE) and here is the sample of the data
JOB SITE TEAM
RN SITE SAC GASTON SUSAN TEAM SAC BERNAL
RN SITE SAC GASTON SUSAN TEAM SAC CASTILLO
RN SITE SAC GASTON SUSAN TEAM SAC CASTILLO
RN SITE VAL RANADA TERESA TEAM VAL RINCON
RN SITE VAL RANADA TERESA TEAM VAL RINCON
RN SITE VAL RANADA TERESA TEAM VAL RINCON
RN SITE SAC MCINNIS JOHN TEAM SAC SMITH
RN SITE SAC MCINNIS JOHN TEAM SAC LEMON
RN SITE SAC MCINNIS JOHN TEAM SAC JACK
TSR SITE SAC GRECO DAVE M TEAM SAC KEN
TSR SITE SAC GRECO DAVE M TEAM SAC ROGERS
TSR SITE SAC GRECO DAVE M TEAM SAC LOPEZ
TSR SITE SAC SHAVER KELLY TEAM SAC JONES
TSR SITE VAL FRANCIS TEAM SAC YANG
I need to assign to variable the number of cells in axle "Y", I explain them, I have assigned to the variable "Celda" the number "4" that, celda = 4 where 4 is the number of cells where begin the information that i need to copy,at firts they were separated sheets, and the macro it was working, assigning a letter a the processed row in the column of the left, but now is a one sheet, and I need, this macro find the last cells that the contain a letter in the left and assign the number of cells to the variable "celda" dont the range for example "A33" else "33" and begin toward down, I have this
Workbooks(origen).Activate
Application.ScreenUpdating = False
celda = 4 'where the number 4 will be changed for the number of cells in axle "Y" in this case "33"
celda2 = 4
cdestino = 1
While Workbooks(origen).Worksheets(1).Cells(celda, 2).Value <> ""
dato = Cells(celda, 2).Value
Select Case dato
Case "Aplicación de material"............
I have tried to write some VBA to copy and paste rows based on the condition in cells A:A in sheet one. So far I have managed to put something together which will paste the first row and insert a new row below but keeps on pasting the same row. But not much else! Not sure I have tried to make it more difficult than what is it.
I would like it to copy a row based on a certain condition ("WRW") in A:A sheet one and paste it to sheet2.
VB:
Function DoOne(RowIndex As Integer) As Boolean
Dim Key
Dim Target
[Code].....
I have created a worksheet which contains seven columns of data and many rows. I need to copy entire rows into nine separate worksheets depending on the data in column G.
I know nothing about VBA but have read enough to realize this is the way to go with this. Would someone point me in the right direction on how to set this up? I've attached the file so you can better see what I'm talking about.
I have a workbook with many (25) worksheets which all have the same structure, column headings, etc. but vary as to the number of rows. I would like to search all worksheets in workbook and copy to worksheet "120" only those rows where column C is "120" and column E is "1-00053-".
Ideally, input boxes would be used to enter these criteria so that it can be used for different scenarios in which these values will vary.
Is there a way to color fill an entire row based on a value in a certain column? Say I have a large file and one column is "yes" or "no" If I wanted all of the "yes" rows to be colored -
View 5 Replies View RelatedI want by using some code I've seen on this forum or using the macro writer and then tweaking the code. So with that said, I've written the attached code but I know there is probably an easier way to write it. It cycles through about 12 sheets using the same below code, but I didn't list that code.
Sub Hide_Rows()
Dim i As Integer
For i = 3 To 418
Sheets("AFA - UMBI").Select
If ActiveSheet. Range("b" & i).Value = "2008-2" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2008-3" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2008-4" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2009-1" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2009-2" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2009-3" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2009-4" Then
Rows(i & ":" & i).EntireRow.Hidden = True
End If
Next i
End Sub
I want a summary list of data from all columns of worksheets that contain the target data and only where the value in col D is 1. So, in the attached example, the data to be checked is on Sheet1 and Sheet2 and the result should be shown on Summary sheet. There will be some tabs that don't need to be checked for the data so it's not a case of check all other tabs except for Summary.
View 14 Replies View RelatedI am self-taught (arguably by a pretty shoddy teacher), and am determined to figure *some* of this stuff out. I need a code to look at the rows on one worksheet and based on the value of column A for each row, copy cells A through E in that row to cells A through E of a blank row on a corresponding worksheet. I found a code from another post that does just what I need it to with one small exception. The code was posted by DaveGuggs and is as follows:
View 2 Replies View RelatedI need the macro that looks in to say Column H sheet1, if value ="true" then copy cells in column A, B, D, F to Sheet2.
View 2 Replies View RelatedI have eight sheets that have lists of questions in, which I want to copy across to a results sheet if the answer to a question is 'Yes'. Each question takes up rows B:H inclusive, and I would want to copy them to rows B:H in the results sheet. The "Yes" value will be found in column F of each row.
How can I set up a macro to copy the entire rows (without formatting) into a results sheet properly? I've tried every solution I can find but always hit a roadblock somewhere.
Ideally I would like to have a 'populate' button on the results sheet that would find every question that was answered 'yes' across the eight survey sheets and import them into results sheet.
Here is what i want to do. # I have a workbook say 'Template', which has two columns: ColA -> Names , ColB -> Value, his acts as a template, i.e a budget. # Another workbook 'sample' which has similar ColA(may contain additional rows) and corresponding value in ColB.
Here is what i need::
I need to copy the contents of ColA and ColB of 'sample' wholse ColB valules are greater than ColB values of 'Template' for corresponding ColA values in both, into a new workbook. SO basically, template acts as a budget check for the sample workbook, and if any value in ColB goes above the budget in template, it will show up in the new workbook. I have attached both the workbooks. Basically the red highlighted cells in Sample are the ones i want in a new workbook.
1. Copy data from original file (I do not want to do anything in the original file) into the spreadsheet (Target worksheet)where the code should run.
2. In sheet 1 of Target Worksheet, there are 2 columns which I need to set criterias on namely Column D and Column L
3. In Column D, I want to specify 3 criterias namely A, B and C
4. In Column L, I want to specify 5 criterias namely London, Frankfurt, New York, Sydney and Tokyo
5. If Criterias in 3 and 4 are met, copy all rows into Sheet 2 of Target Worksheet
I have a workbook that has several sheets in it with various rows of data on each sheet. I would like to have a macro to loop through all the sheets in the workbook and copy and paste the rows into a new summary sheet. The rows to be copied should only have data in Column A, in other words if Column A of a row is blank I want it skipped. Also Row 1 of every sheet contains my headers, and I am only using columns A through M. It needs to be able to copy rows even when autofilter is in use.
View 13 Replies View RelatedI worked on a workbook which has multiple worksheets( mine has 6). The data doesn't start from A1. I want to copy the data from each worksheet into a sheet called summary. I want to create the macro that would only copy the heading row once.
WB test.xlsxWB test.xlsx
I have been struggling to setup these two workbooks for a bit now, and I can't for the life of me figure out a formula to do what I need to do. Essentially, I have one workbook that contains a list of purchase records for my company, sortable by Date, Vendor, Price, etc. and one workbook that has a sheet for every vendor. What I need is a formula that will search column B for a vendor, Allied Waste for example, and transfer all the information within the rows for every instance that vendor is found to the new workbook.
This is basically just a way where I can input information once in one workbook, where the sheets are divided by month, and the info will automatically transfer to another workbook, where the sheets are divided by vendor.
which I have modified from one that I use before for sheets 1 & 3 (instead of 4&5)
But it isn't working! I have defined a dynamic range in sheet 4, which is the range I want to search (its named "search") should i be using this range in the formula somewhere?
Private Sub CommandButton1_Click()
Dim rngFind As Range
Dim strFirstAddress As String
With Sheet4.UsedRange
Set rngFind = . Find(ComboBox1.Text, LookIn:=xlValues)
If Not rngFind Is Nothing Then
strFirstAddress = rngFind.Address
Do
rngFind.EntireRow.Copy Sheet5.Range("A" & Sheet5.Rows.Count).End(xlUp).Offset(0, 0)
Set rngFind = .FindNext(rngFind)
Loop While Not rngFind Is Nothing And rngFind.Address <> strFirstAddress
End If ..................
I have Master sheet where I collect info from sub sheets. All sheets are similarly formatted, ie. product numbers on column A and headers on row 2. I need to sum values from all sheets based product number and header. Master sheet includes all product numbers and some extra headers, sub sheets include only needed numbers. Headers on sub sheets are identical.
Currently I have this thing solved with following formula:
N48=sumproduct(sumif(indirect("'"&$B$378:$B$385&"'!A:A");A48;indirect("'"&$B$378:$B$385&"'!L:L")))
Where B378:B385 includes sheet names.
But problem with this is that column is hard coded, so I have to know that that value I am looking for is in column L. That wouldn't be show stopping problem on its own, but I have columns all the way to DR and copying formulas for each column takes a lot of time when I have to manually update each column. Just copying cell holds that L:L and doesn't change it.
So, in addition of getting values for specific product number I need to get values from specific column based on column header.
There is no where else for me to go. My problem is: I have a table with over 30,000 rows and columns A - W. The first column A contains UNIQUE ID. Column G contains CATEGORY CODE.
Example.png
Since Unique ID (column A) can be listed more than ones, I need to select only those records (rows) that correspond to the following: Category Code (column G) is either 14, 15, 16, 17, 18 and not any other. I hope you can see the attachment, UNIQUE ID = a;does not satisfy my criteria as it does contain Category Code 14, it also contain other codes. The final result from the sample provided would be extracting data for UNIQUE ID = e (since it is the only record that does not contain any values other than 14, 15, 16, 17, 18).
Example attached. I need to filter rows based on a start date and stop date, columns C and D. So for example the filter date is 01Mar07 (located in A5). As this date in this cell is changed the rows are filtered accordingly. I need to filter rows so that any row with a start date which includes Mar 07 is shown and I need to include all rows that have an end date in Mar 07. This would result in the inclusion of an event that started in Feb and Ends in march being displayed.
Additionally, I would need to clear the filter. I'm just starting out, I'm sure this is easy for you all the excel experts., and you may probably have a better method to approach this.
I need a macro that will search data from a range of cells in one column for multiple criterias and them copy the entire rows to a new worksheet.
Example I have a list of group names
Network
Telcom
Help Desk
BA
Network
I only want to choose all Network and Telcom rows copy to another worksheet.