Is it possible to distinguish a checkbox that is inside a frame from one that is outside it? What I am trying to do is loop through all the checkboxes on a multipage but only those that are within a specified frame.
View 4 Replies
I have one Sheet for each day of the month, named 1,2,3,4 and so on. Each Sheet is copied from the second Sheet upon creation, so they are all the same, except for the first sheet. On each Sheet there are a couple of checkboxes (four at the moment) placed at the same position och each Sheet.
If, let's say the first checkbox on Sheet 6 is checked, then the next seven Sheets checkboxes that is placed on the same spot should become triple-state. I want this to happen in real-time, not when the Sheets are copied/created. In other words, when I click a checkbox on any given day (Sheet), the next seven checkboxes on the upcoming 7 Sheets should change state.
This is to say "this is ok for seven days, and if there has gone 7 days since the last click - the checkbox is empty.
I have a userform with several checkboxes which relate to different areas to run a report on. In total i probably have 70 odd checkboxes which are set out in groups according to what they relate to (on a multipage on the userform)
I've set out the option to 'select all checkboxes' within a particular group which may contain a certain number of checkboxes (but not all). I'd like my model to run reports to the selected group of checkboxes rather than all of them.
So for example, on page 2 of my multipage i have 5 checkboxes which i've named in the GroupName section in properties as Group1. When my user selects the relevant 'Run Group 1 Reports' button on Page 1 i'd like my model to ru though code using the group of 5 checkboxes relating to Group1.
some of my groups will be for 30 / 40 checkboxes and running it though groups would save a lot of time.
it's been a while for me so bare with me. I've created a user form with four checkboxes each representing a worksheet. I want to loop through all the checkboxes and those that are checked should be printed.
I'm not sure how to loop through them,
I am trying to change checkboxes caption name using a loop so that I don't have to change them individually. Here is a simplified example of what want to do:
1) I save the caption names in a array
2) I run through a loop to rename each checkboxes using the names saved in the array
Sub change_Checkbox_Caption
Dim MyArray(1to3) as string
Dim IndexMyArray as integer
MyArray(1) = "YES"
MyArray(2) = "No"
MyArray(3) = "Maybe"
[Code]...
I have a UserForm (UserForm61) where I have a popup calender acts like DTPicker. and some other controls . My Problem is whenever I am trying to open the calender it is opening behind every control. changing the z order played no role.
View 9 Replies View RelatedOn an Excel 2003 spreadsheet I already have two option buttons. I need to add two additional optionbuttons. I placed them within a frame so that they will function independently of the other buttons. Specifically, I created Frame1, selected Frame Object-->Edit, select Toolbox, add Optionbutton3 and Optionbutton4, exit Design mode.
The new Optionbuttons correctly toggle their values when out of design mode . When I re-enter design mode and double-click to take me to the VBA code, it however only shows me Frame1_Click(). Within Frame1_Click() I have tried adding the code
For Each ctl in Frame1.Controls
'Do whatever
Next ctl
I also know you can limit the controls you diddle by doing:
For Each ctl in Frame1.Controls
If TypeName(ctl) = "TextBox" Then
'Do whatever
End If
Next ctl
But this gets absurd when it gets to the point I want it:
For Each ctl in Page1.Controls
If TypeName(ctl) = "Frame" Then
For Each ctl2 in ctl.Controls
If TypeName(ctl2) = "OptionButton" Then
' Do whatever
End If
Next ctl2
End If
Next ctl
Is there any way to simplify this? Can I define ctl as frame, for instance, and then it will only look for every frame object in Page1? Or is there some other trick I'm missing? Or am I just making userforms with too many wrappers?
I am developing a form for emergency dispatching. One of the features of this dispatch sheet is that there are several maps in it that open on a seperate form. The map form has 4 maps that are picture files in an image. these images are in a frame. The different images are selected using option buttons. Given the background above, my problem is this. I have code that zooms in 50% each time the Click event for the image is fired. wht i am trying to do is make the zoomed view center where i clicked. this is the code that i have so far but it doesn't work all that spectacular, the closer I zoom in the further out of center the place i clicked gets untill it is out of view.
Private Sub Layout_MouseMove(ByVal Button As Integer, ByVal Shift As Integer, ByVal X As Single, ByVal Y As Single)
CurrentX = X
CurrentY = Y
End Sub
Private Sub PlantLayout_Click()
If Frame1.Zoom < 400 Then Frame1.Zoom = Frame1.Zoom + 50
frmmap.Frame1.ScrollLeft = CurrentX - (Frame1.Width / 2)
frmmap.Frame1.ScrollTop = CurrentY - (Frame1.Height / 2)
frmmap.Repaint
End Sub
I have a form that has object buttons in a frame. I see that I can only select one or the other of the object buttons that are in a frame. Is it possible to see if no object buttons were selected in a frame and then display a msgbox telling the user that they need to go back and pick a button?
View 4 Replies View RelatedI have a formula that calculates only seconds and frames. The frame rate is 75 fps (0-74).
e.g., 49.50 is 49 seconds 50 frames. It will not parse Minutes.Seconds.Frames, e.g., 1.49.50 is 1 minute 49 seconds 50 frames.
What my existing formula does is converts the number to all frames then converts the answer back to seconds and frames.
I need this formula to include minutes in its calculation.
A copy of the spreadsheet is here: ...
Is it possible to scroll down in a UserForm Frame with a VBA Code in excel. My frame in the userform has a scroll height of 600 and a lot of option buttons. Based on a selection in a ComboBox(using If statement), I'd like to scroll down to a certain amount in the Frame.
View 7 Replies View RelatedHow to create repeated time frame within a column like example stated as below:
Time 9:45AM
10:00AM
10:15AM
9:45 AM
10:00AM
10:15AM
9:45 AM
10:00AM
10:15AM
I seem to have a bug i can't quite figure out with my code - its causing excel to crash each time it reaches this line (when its commented out - the form runs fine - otherwise "excel has encountered an error")....
Set frameFullX = frameFull.Controls.Add("Forms.frame.1", "frameFull1")
frameFullX is declared as a control and frameFull is a frame already on the userform.
Anyone know what I might be doing wrong (I'm going to try restarting and see if was just an issue with my machine or not?
I have a sheet with some normal cells and then some MS Forms 2.0 frames with OptionButtons inside of them. If I have OptionButtons outside of the frame I know how to read their values, but how to do it when the control is in the frame?
I need to make a form on one sheet and then make as many copies of the sheet as needed, and finally I have a macro that copies the data from all forms to one sheet, so that each form represents one row. My main goal is to save that one sheet as a .csv-file and then import it to our CMR database.
I'm not very familiar with Excel forms. Should I take some other approach to this problem or should I continue like I'm doing? I would be almost ready with my workboot if I only could read the values of the optionbuttons inside the frame.
I have tried:
"If Sheets(i).FrameInstallationType.Controls.SL_STD_HD.Value = True Then"
and
"If Sheets(i).FrameInstallationType.SL_STD_HD.Value = True Then"
where "SL_STD_HD" is the name of the OptionButton, but apparently these both are wrong.
In Excel 2000 there seems to be a problem with setting the focus in a UserForm TextBox if the SetFocus method is applied in the same submodule as the UserForm.Show method. Microsoft's circumvention for this is to put the SetFocus command in the form's Activate event submodule.
This seems to work OK except when the TextBox you are applying the SetFocus to is the first control inside a frame. It works if the TextBox is not the first control, and it can be circumvented by first setting the focus on a subsequent control then switching the focus to the intended control.
However, the circumvention is not that useful if there is only one TextBox control in a frame or, as in my current project, if you try to create a generic piece of code to validate controls from multiple forms and set the focus from within the generic code.
Does anyone know of a way over overcoming this problem and being able to directly set the focus to the first TextBox inside a frame?
On my userform I have a frame. Within the frame, there are 6 option buttons. Can I trigger an event when when the user selects a different option button? I was expecting to see a Frame.Change method. But I don't. One solution is to insert code on each of the Option Buttons Change methods.
View 2 Replies View RelatedThe code below works really great which Andy helped me with, but now I've put the textboxes that are changing in a frame. That is because I need to scroll the textboxes. That works in another form I've got, but for this form I've also got the textbox, TBSum601, which is updated from the sub UpdateTotal() (see below). BSum601 is placed on the form but not inside the frame. When I run the application it stops in Sub TxtGroup_Change() at the line: TxtGroup.Parent.UpdateTotal
I think it's because of that the textboxes for the TxtGroup now are in a frame instead of as before, on the form. don't know exactly what the "Parent" does, but I think it's something I have to do with the code there.
Originally Posted by Andy Pope
Class event
VBA:
Private Sub TxtGroup_Change()
If Me.TxtGroup.Text = "" Then
Me.TxtGroup.Text = 0
End If
TxtGroup.Parent.UpdateTotal
End Sub
Public Sub UpdateTotal()
Dim lngTotal As Long
Dim lngIndex As Long
For lngIndex = 1 To UBound(X) / 4 ..................
I have placed a Frame Control on Excel Sheet and add Some Controls(TextBoxes) to it. What I want to Do is when I enter Value in TextBox1 and the Focus Got to TextBox2
Then Value from TextBox1 will place on Activesheet.cells(1,1)..
Please check the Attached File : FrameControls.xlsm
In the attached on the quote tab in cells G5 & H5 i have two formulas both trying to pick up the data from the highlighted matrix in the frame tab.(i only need one)
From the dropdowns in cells F1, F3 & F5 in the quote tab I wish to get the data from the matrix in the frame tab cell range C3 - F20
I'm trying to Automatically fit the text to the size of the TextBox frame using:
Code:
With obFinalNote.TextFrame2
strTxt = .TextRange
.DeleteText
.WordWrap = msoTrue
.AutoSize = msoAutoSizeTextToFitShape
.TextRange = strTxt
End With
It appears ".AutoSize = msoAutoSizeTextToFitShape" only considers the width (I think) as the text is downsized but yet the text still extends beyond the the bottom of the frame. And never gets set to less than 11 point. Even when there's not enough text to reach the bottom of the frame the text is still set to 11pt leaving the frame half empty. Need to have text big as possible.
How to keep text in its entirety within the frame of the shape?
The quantity of text varies widely and the frame size cannot change. I've tried using Len() and dividing by a certain number and then based on that answer set the size with:
Code:
With obFinalNote.TextFrame.Characters.Font
.Name = "Arial"
.FontStyle = "Normal"
.Size = NoteFontSize
.Underline = xlUnderlineStyleNone
.ColorIndex = xlAutomatic
End With
But this technique doesn't seem reliable as the number to divide the Len() by seems to depend on how "wraps" have occured.
I can't refresh the values in the captions in the labels that have been dynamically added to Frame 1 on page 1 of a multipage control. I have added the salesperson' name with a checkbox, and three labels for each sales person. The captions for the labels are the values for the number of sales, gross sales amount and commission. The captions get these values from an Array "SalesAry()".
Outside the multipage control I have another frame with the total of salesmen, service, product, customers, total sales, total commission total product sold. The user can check the checkboxes next to each sales person to include in the final report. After the user checks some of the checkboxes, there is an "Update Totals" Button on the userform (outside the multipage) to update the totals.
This works, but the values in the sales person's labels do not update. I have tried to repaint the userform me.repaint or me.frame1.repaint but the labels in the frames on pages do not repaint or refresh?? I have also tried to focus the userform to the multipage by inputting "multipage1.value = 0" just prior to me.repaint. I have three other pages on the multipage. Same issue/problem. Page2 is the Service person their number of accounts, gross sales and commission, Page 3 is the Products names Number sold, gross sales and commission and page four is the Customer name number sold and the commission.
In the end I want the user to select (check) only the salespeople, Service person, Products and Customers to include on the report. But since I can't get the labels in the frames in the multipage to update, it just looks confusing. I know that the Arrays are updating because the Totals keep getting updated correctly based on the selections, but again it looks confusing because the total don't match the values in the labels?
I want to write a VBA code that will place ActiveX Frame directly onto the worksheet and then add 3 Option Buttons from Toolbox into that frame.
I could not find an answer searching through the web... Also when trying to record macro and see the code it did not record placing the buttons from the toolbox or any formatting (color, caption, etc.) via properties...
When formatting the buttons it would be useful if the selected radio button would have different color, bold font, etc.
I need to be able to calculate the actual number of days worked for an employee over a specific date range. I have a data sheet containing employee, transactions, and date of transaction (date only, does not include time). The actual number of days worked may fluctuate due to time off or holidays, so I need to be able to calculate this individually by employee. For example, with columns Employee, Transaction, & Transaction Date:
123 ABC 07/01/2009
123 ABC 07/02/2009
123 DEF 07/02/2009
123 GHI 07/02/2009
123 ABC 07/03/2009
123 ABC 07/07/2009
123 DEF 07/07/2009
123 ABC 07/08/2009
123 ABC 07/09/2009
etc....
Should return 4 work days for employee 123 over the date range 07/01/2009-07/07/2009
I have a nifty little form that I created that list some bullet points (as Labels) along the left side of the page, and clicking on these Labels run code that hooks up to a VLookup on the worksheet and displays custom text in a larger text box on the right.
Then I added a Frame with three option buttons, a text box and a command button to the bottom of the form. And now, clicking on the Labels triggers an error message:
"Object doesn't support this property or method."
But if I remove the frame, the code works fine... The code line that bugs says:
FrmImport.txtWizQ.Value = Range("WizQ").Value
way to fix it without relocating the frame?
I am in the process of creating a module to validate a MulitPage UserForm that is composed of, among other controls, multiple frames, each containing a TextBox and two OptionButtons. I need to identify those frames where the TextBox value is not null and neither of the OptionButtons have been selected. The module will pass as variables the TextBox value, OptionButton captions and Frame caption to another module that will create a UserForm with the invalid Frame/TextBox/OptionButtons sets for the user to correct.
The interim code listed below runs as a command button on a test UserForm. The MsgBox displays only the first of the OptionButton’s caption as Opt1 and Opt2. Can anyone tell me why and where I went awry?
Public WithEvents As MSforms.TextBox, Opt1 As String, Opt2 As String, vtxt As Long, vFrame As String, vTag As String
Private Sub CommandButton1_Click()
Dim pPage As Page, cCont As Control, vCont As MSforms.Control
'Dim Opt1 As String, Opt2 As String, vtxt As Long, vFrame As String, vTag As String
Is there a more elegant way of accomplishing this? (Control Tags are already spoken for.)
I am trying to do a timesheet spreadsheets that lists employees clockin and clockout times
Name Start End num hours worked
Cory 02:00 04:00 2
Jack 23:00 05:00 6
Fred 10:00 17:00 7
and then go through the list and and count the number of employees in a certain range.
time range number of employees working
05:00-06:00 1
06:00-07:00 2
07:00-08:00 6
08:00-09:00 5
09:00-10:00
10:00-11:00
11:00-12:00
12:00-13:00..............
I have frame on a userform with command buttons. Is it possible to loop thru and capture the command button captions in a textbox. I'm trying to put together keyboard on a userform, so the user can populate a textbox with letters or phrases.
View 6 Replies View RelatedI am trying to pull a specific time frame of data from worksheet, in a large file, into another active workbook. A fiscal month. I don't know how to at all. I figure it should be a And IF and Vlookup but do not know how to execute it all.
View 1 Replies View Relatedcode to pull a hidden frame when I click a command button. I have Uploaded a Sample worksheet on my requirement.
View 4 Replies View Related
