I would like to create a Macro which does the following task. I have a Workbook Master.xlsx with a worksheet "source". The path of Master.xlsx is C:Test
In the Directory C:Testprojects i have about 50 files which all contain the String "Forecast" in their filename. These Forecast Workbooks need an update in the Worksheet "actuals"
So, i need a Macro that copies WS "source" from WB "Master" to WS actual in all WB's Forecast.
I did search but I couldn't find what I want. I have a load of .csv files in a folder. I want to loop through all files, run the macro below and close the .csv file without saving. My macro copied data onto another workbook and saves, but I don't know how to loop through all files within a folder.
I need some code that will open each file in the folder, run the macro below and close it again. I don't know how to put code tags in so I have put the code in a .txt.
macro to run as a loop on all files in a given folder but allow for the option to Browse for the folder I want this to run in?
Sub CleanUp()
Dim i#, rng As Range
With Application
.ScreenUpdating = False
.DisplayAlerts = False
For i = Worksheets.Count To 1 Step -1
If Worksheets.Count = 1 Then GoTo e
Set rng = Intersect(Worksheets(i).[11:11,13:13,23:23,25:25], _
Worksheets(i).UsedRange)
With rng
.Replace What:=Chr(32), Replacement:="", LookAt:=xlPart
.Replace What:=Chr(160), Replacement:="", LookAt:=xlPart
End With...........................
I am trying to process 60+ data files. I've recorded/written macros that do all of the processing, and now I would like to write a loop that will go through a folder with the data files (.txt, tab delimitted), and run the code on each file. I am using the Mac Version of Excel 2004. I have tried to adapt some code that I found in the forums, but after fixing a few errors, now nothing is happening when I run the code. The code is below. I have it in a module in the VBA editor.
length of the code; I'm assuming the problem is in the very beginning or end (the code I added for the loop), as the code in the middle that does the actual processing works.
Sub ProcessData()
Dim strDocPath As String
Dim strCurrentFile As String
strDocPath = "Macintosh HD"":Users:thomasarmstrong:Desktop:SF08_Macrosv2:Loop_test:directory:"
strCurrentFile = Dir(strDocPath & MacID("TEXT"))
I have excel files in a folder, I need a macro to loop through all files, rename them and save them in another folder. the file's name is available in a cell in each file, I am able to get the file name as text (I had to dig a little to get the text as it was between ""). Well I am stuck right now because the macro is doing what it's supposed to do for one excel file only and does not continue with the rest of the available files for a reason.
VB:
Sub RenameAllFiles()
Dim Bk As Variant
Dim n As Integer
Dim NewName As String
[Code] .....
I want to open all csv files in a folder and just copy and paste some columns into another file. I am having a bit of trouble with the following code which can be found at ozgrid and I have modified slightly so it looks in the current directory instead of a fixed path...
Code:
Sub RunCodeOnAllFiles()
Dim lCount As Long
Dim MyDir as string
[Code]....
For starters, if I don't use on error resume next I get a runtime error 445: object doesn't support this action. So when I use the on error resume next, then by the time it gets to the foundfiles line, there are no variables set, so on the next line (workbooks.open) nothing happens.
Is there an easier (more up to date?) method to open all csv files (or excel files) in a folder?
Say I have a list in column A
Image1.jpg
Image2.jpg
Image3.jpg
Image4.jpg
Image5.jpg
In VBA, how can I loop through the list and delete files from a certain folder. The list will vary in length from time to time.
I have a set of workbooks-all located in the same folder-in which data are shown "horizontally"
i.e. file 1 - sheet1 looks more or less like this:
1 2 3
4 5 6
same with the other files.
what I am trying to achieve is that in another woorkbook, all the data are copied in one vertical vector
i.e
1
2
3
4
5
6 from file 1 and then
1
2
3
4
5
6 from file 2
I can seem to be able to resize the array to the correct size but the only values copied are for the last file. in the example that I have above, the result would look something like:
<empty>
<empty>
<empty>
<empty>
<empty>
<empty>
1
2
3
4
5
6
This is the code I have so far:
Sub Consolidate()
Dim a As Workbook
Dim b As Workbook
Dim x, y(), i&, j&, k&
Dim myPath As String
Dim filename As String
Dim wb As Workbook
[Code] .........
I have two pieces of code that each work, but I am struggling to combine the two.
I started with Ron de Bruin's code to attach multiple files to an email and then found more code that will loop through a folder to attach multiple files to an email.
Essentially, I would like the structure of Ron de Bruin's code, with the ability to have folder paths in the cell range, rather than file names.
Here is the code that works to loop through a folder, but it only works when I have the paths listed in one column, not in a range (e.g. columns C-Z)
Code:
Sub Send_Indv_Files()
Dim OutApp As Object
Dim OutMail As Object
[Code].....
I need a macro in a workbook to look at all the files in the same folder that have "*att*.xls" in the name and determine and copy from the range A15:W515 only the rows that have data in at least columns A, C and D. Each file will vary as to how many rows there will be and there are more than the files with "*att*.xls" in the folder. The data will be on the only worksheet in each file and the worksheet is named "G2WAttendee_xls" the data from all the files need to be copied to the file called "Consolidated webinar reports.xls" (I am using Excel 2003) and to a sheet called "Attendance Data" and added to the end of the last paste.
At the start of the macro the current file "Consolidated webinar report.xls" should be saved to a sub folder of the current directory and have the date saved added to the name. The sub folder is called "Completed reports". The data in the original file on worksheet "Attendance Data" should be deleted.
At the end of the process all the files that have had data copied from them should be moved to the sub folder "Attendance reports consolidated" (This could be done as each file is closed if that is easier).
I have headings in row 1 of the "Attendance Data" worksheet that match the headings in the various files in the folder (which will always be in row 14 of the individual "*att*.xls" files).
The folder with all the files and the "Consolidated webinar report.xls" file is at path "Z:P and S MEvaluationsWebinar series 2012-13TB".
I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1
While DoIt = 1
Open "C:TempList.txt" for output as #1
Print #1, Files In Folder
Close #1
Open "C:TempList.txt" for input as #2
while not eof(2)
Line input #2, MyFile
Display MyFile on screen
Wait for 30 seconds
Close MyFile and MyApplication that opened it
wend
Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
I would like to create a code that will open all workbooks in folder "A" one at a time and then close the work book after another code is executed. So one workbook will open and while the workbook is open, I will call another code to format the active workbook and then the active workbook will be saved in folder "B" and closed and go to the next workbook in folder "A" to start all over. The folders are saved on the desktop.
View 5 Replies View RelatedI is it possible to convert all comma separated text files in a single folder in to excel files. But the requirement is to have 2 sheets in each new file. first to be the full file - with all columns, and in the second sheet to keep only colum A B D G H K L M O P R S T V W from the first sheet. The second sheet name must be the same as the first one but without the first "wlist_" in the name.
One more thing. The third column in the second is called "COUL". there are short letters for colors in french
can they be converted with the sort in English like it goes:
NO = B
BA = W
RG = R
SO = P
JA = Y
BE = L
VE = GY
GR = G
VI = V
MA = BR
BJ = TA
OR = O
Here is a link to the both CSV and an example excel file with the end result. In this example i haven`t change the shorts for the colors. It takes me too much time with the find and replace function. And at the moment i`m really pushed from time.
[URL]
Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro()
Dim lastRow As Long
Dim i As Long
[Code]....
Is there a code that will search a pre-determined folder for all .xls files containing the word "Temp", and deleting those files?
Example:
In the root of drive M, I have several Excel files. Anytime one of the original tracking logs is opened, a temp file of that log is automatically created. I would like to automatically search the drive and delete all files containin the word "Temp".
I've attached a picture of the directory tree, in case that will help. The file will always be named "PO Response Tracking - Temp#######.xls", with ###### representing a series of either 5 or 6 numbers.
vba to copy files (pdf / cad) from various source to destination folders. Column A will list the source of the PDF files, Column B with the file name, Column C with the destination folder. Column D with value Y or N with Y denoting Yes to Copy and No for No. I have like 30000 rows of data.
View 3 Replies View RelatedI've (almost) got a macro that modifies & saves a file. I don't want to post it yet because I need to clean it up and I've got a ton of REM'd out statements that I need to flush before I go public....
How can I modify it to open each file in the folder? I'm looking at several thousand files that need to be changed and put away in the correct folder.
(and I say almost because I had it and accidently ran it on my personal workbook and it deleted itself....
Is there a way list load all the files names in a folder in to a listbox in a userform
View 2 Replies View RelatedI have a folder C:My Documents that contains excel & Pdf files. Is it possible to list all the files by name contained in this folder in a excel spreadsheet i.e one filename one cell?
View 4 Replies View RelatedI have created a Spreadsheet that does all of the calculations, analysis, graphs, etc. that i need; however every time I wish to use this spreadsheet I need to first open up a spreadsheet with data, copy it and then paste it into the original spreadsheet. While this is not horrible, it is quite tedious to do several thousand times.
Thus, I was wondering if it were possible to create a Macro that would open up all files in a specific folder, then select each one and paste the relevant data into my original spreadsheet. I know this possible for specific files; for example, I have created a Macro that will select files data.xls, dats1.xls, data2.xls, and paste these into the spreadsheet, but I was wondering if there was a way to generalize this so that it will simply open every file regardless of the name or how many files there are in the specific folder.
I'm a novice with VB, so go easy on me. I'm trying to write a macro to copy the same couple of cells from hundreds of excel files and paste them into one summary file. What I've written so far is:
View 10 Replies View RelatedI am trying to come up with a macro that is able to open a .htm file in Excel, perform a set of code, close the file, then repeat the process with the next .htm file in the folder. I found the following post which has helped me thus far, but there is something that is not allowing Excel to open the .htm files even though there is no problem opening them in Excel manually or with another macro I've made. Here is the link to the set of code I'm currently working with:
http://www.excelforum.com/excel-prog...-a-folder.html
I've put some .xls and .csv files into the target folder and the program works perfectly which tells me Excel is having a problem with the .htm format for some reason. Here is the set of code I currently have which I have slightly modified for the new file format:
I have several (around 35) CSV files that I download regulary. Is there a quick way to rename all the CSV files in a given folder based on adding "Update_" to each file name.
E.g Say two of the orginal files are called:
Monday.csv
Tuesday.csv
I'd like to run some kind of macro to rename them to:
Update_Monday.csv
Update_Tuesday.csv
In the code below I would like to add to move these files:
byemployee.csv
byposition.csv
status report.xls
bydepartment.csv
and if the file byband.csv exists, then move also otherwise ignore. I want to move to the folder Uploads which is also found under the variable MyPath
If it cannot be included in this code, then I have no problem with a new one.
Private Sub Exitbtn_Click()
Dim MyPath$, MyName$
Application.ScreenUpdating = False
Call chooseView.hideSheets
'Save the file to this path and type file name
[Code]....
I have the following two folders located in my D Drive:
1. D:FilesData
2. D:FilesArchives
I have lots of files (.txt) in the first folder (D:FilesData) from which I need to move all the files whose first character is starting with _(underscore) to the second folder (D:FilesArchives).
I found some code on here the other day which will do though all the files in a folder and send them to a zip file which works great how to zip a single fixed file. I down load files from our oracle system daily and need to keep them but want to keep the file size down.
Code:
Sub ZipPackage()
Dim ZipFile, TargetFolder, NewFileName, ofile
Dim o As Object
[Code]...
But the "ofile" doesnt contain the file type. Is there away to adjust this code so it recognises what the file type is?
I have a prompt for the user to select a folder and then assign the path a variable. I would then like the VBA macro to open all files within that folder (no sub folders) that end in .xls.
View 3 Replies View RelatedI want open excel files in a folder with ascending order how can I do this,
Eg:- In C:6-11-28 folder there are files as F1.xls, F2.xls , F3.xls......
I want to open above files and get some data from each excel file
Folder name change as System date
Every week I get a folder full of files and I have to rename them with a week ending date...Below is what I hacked together, but it's not working...
Sub Rename()
Dim OldName, NewName, npath As String
weekendingdate = InputBox("What is W/E Date??")
npath = "J:Test*.pdf"
While Smith ""
OldName = Smith: NewName = Smith & weekendingdate
Name OldName As NewName
Wend
End Sub