Macro Run As A Loop On All Files In A Given Folder
Mar 22, 2008
macro to run as a loop on all files in a given folder but allow for the option to Browse for the folder I want this to run in?
Sub CleanUp()
Dim i#, rng As Range
With Application
.ScreenUpdating = False
.DisplayAlerts = False
For i = Worksheets.Count To 1 Step -1
If Worksheets.Count = 1 Then GoTo e
Set rng = Intersect(Worksheets(i).[11:11,13:13,23:23,25:25], _
Worksheets(i).UsedRange)
With rng
.Replace What:=Chr(32), Replacement:="", LookAt:=xlPart
.Replace What:=Chr(160), Replacement:="", LookAt:=xlPart
End With...........................
View 10 Replies
ADVERTISEMENT
Mar 5, 2009
I am trying to process 60+ data files. I've recorded/written macros that do all of the processing, and now I would like to write a loop that will go through a folder with the data files (.txt, tab delimitted), and run the code on each file. I am using the Mac Version of Excel 2004. I have tried to adapt some code that I found in the forums, but after fixing a few errors, now nothing is happening when I run the code. The code is below. I have it in a module in the VBA editor.
length of the code; I'm assuming the problem is in the very beginning or end (the code I added for the loop), as the code in the middle that does the actual processing works.
Sub ProcessData()
Dim strDocPath As String
Dim strCurrentFile As String
strDocPath = "Macintosh HD"":Users:thomasarmstrong:Desktop:SF08_Macrosv2:Loop_test:directory:"
strCurrentFile = Dir(strDocPath & MacID("TEXT"))
View 9 Replies
View Related
Mar 11, 2014
I would like to create a Macro which does the following task. I have a Workbook Master.xlsx with a worksheet "source". The path of Master.xlsx is C:Test
In the Directory C:Testprojects i have about 50 files which all contain the String "Forecast" in their filename. These Forecast Workbooks need an update in the Worksheet "actuals"
So, i need a Macro that copies WS "source" from WB "Master" to WS actual in all WB's Forecast.
View 5 Replies
View Related
Apr 28, 2009
I did search but I couldn't find what I want. I have a load of .csv files in a folder. I want to loop through all files, run the macro below and close the .csv file without saving. My macro copied data onto another workbook and saves, but I don't know how to loop through all files within a folder.
I need some code that will open each file in the folder, run the macro below and close it again. I don't know how to put code tags in so I have put the code in a .txt.
View 3 Replies
View Related
Feb 27, 2013
I have excel files in a folder, I need a macro to loop through all files, rename them and save them in another folder. the file's name is available in a cell in each file, I am able to get the file name as text (I had to dig a little to get the text as it was between ""). Well I am stuck right now because the macro is doing what it's supposed to do for one excel file only and does not continue with the rest of the available files for a reason.
VB:
Sub RenameAllFiles()
Dim Bk As Variant
Dim n As Integer
Dim NewName As String
[Code] .....
View 8 Replies
View Related
Nov 23, 2011
I want to open all csv files in a folder and just copy and paste some columns into another file. I am having a bit of trouble with the following code which can be found at ozgrid and I have modified slightly so it looks in the current directory instead of a fixed path...
Code:
Sub RunCodeOnAllFiles()
Dim lCount As Long
Dim MyDir as string
[Code]....
For starters, if I don't use on error resume next I get a runtime error 445: object doesn't support this action. So when I use the on error resume next, then by the time it gets to the foundfiles line, there are no variables set, so on the next line (workbooks.open) nothing happens.
Is there an easier (more up to date?) method to open all csv files (or excel files) in a folder?
View 6 Replies
View Related
Jul 2, 2014
Say I have a list in column A
Image1.jpg
Image2.jpg
Image3.jpg
Image4.jpg
Image5.jpg
In VBA, how can I loop through the list and delete files from a certain folder. The list will vary in length from time to time.
View 9 Replies
View Related
Apr 9, 2014
I have a set of workbooks-all located in the same folder-in which data are shown "horizontally"
i.e. file 1 - sheet1 looks more or less like this:
1 2 3
4 5 6
same with the other files.
what I am trying to achieve is that in another woorkbook, all the data are copied in one vertical vector
i.e
1
2
3
4
5
6 from file 1 and then
1
2
3
4
5
6 from file 2
I can seem to be able to resize the array to the correct size but the only values copied are for the last file. in the example that I have above, the result would look something like:
<empty>
<empty>
<empty>
<empty>
<empty>
<empty>
1
2
3
4
5
6
This is the code I have so far:
Sub Consolidate()
Dim a As Workbook
Dim b As Workbook
Dim x, y(), i&, j&, k&
Dim myPath As String
Dim filename As String
Dim wb As Workbook
[Code] .........
View 11 Replies
View Related
Feb 7, 2014
I have two pieces of code that each work, but I am struggling to combine the two.
I started with Ron de Bruin's code to attach multiple files to an email and then found more code that will loop through a folder to attach multiple files to an email.
Essentially, I would like the structure of Ron de Bruin's code, with the ability to have folder paths in the cell range, rather than file names.
Here is the code that works to loop through a folder, but it only works when I have the paths listed in one column, not in a range (e.g. columns C-Z)
Code:
Sub Send_Indv_Files()
Dim OutApp As Object
Dim OutMail As Object
[Code].....
View 4 Replies
View Related
Apr 22, 2009
I found the following code to execute a macro in all excel files in a folder. Sounds amazing! I have a code to add to it, however I am having issues getting it to work. take a look at it and let me know what (more like, how many things). I am adding this to the Sheet 1 Worksheet.
View 3 Replies
View Related
Jul 10, 2012
Here is a macro I have found and manipulated for my particular case. The problem is that I want to narrow the search criteria by just pdfs and only those starting with Segment which i know in coding would be something like "Segment" & "*" & ".pfd" or something to those terms but the code uses objects which I'm not too familiar with.
Code:
Sub ListAllFile()
Dim objFSO As Object
Dim objFolder As Object
Dim objFile As Object
Dim ws As Worksheet
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set ws = Sheets("Simple Cut Lists (2)")
[Code] ........
How do i set objFile to just pick up my criteria?
View 3 Replies
View Related
Jul 19, 2012
Please look at the code below...need this to open and run FIXId macro, save and close then loop through all files in the specified folder.
Code:
Sub CorrectID()
Dim Wb As Workbook, sFile As String, sPath As String
Dim itm As Variant
Dim strFileNames As String
sPath = "C:UsersXXXDocumentsFlash Repots2012"
sFile = Dir("C:UsersXXXDocumentsFlash Repots2012" & "*.xlsx")
[Code] ....
View 7 Replies
View Related
Nov 25, 2013
Excel macro that "simply" prints out all files in a folder on my local C drive?
E.g. C:example
This folder could contain anything from zero to 50 files.
I'm not sure where to start with the VBA code.
View 2 Replies
View Related
Jun 16, 2014
Macro to rename files
I have following problem, discribed also in the link above.
I need a vba code to
- choose a folder instead of a file
- find all the files in the chosen folder with name that starts with "sz" and end with "_d"
- rename those files by replacing the first 5 numbers that follow sz with 5 different numbers that the user can choose e.g. through a user form.
I imagine the user to open the excel file, click on a form thats linked to a macro. The macro will call a userform and ask the user to choose the folder and type in a textbox the 5 new numbers.
I need the code that will be pasted behind the "OK" button in the userform.
Is this possible with vba?
Here a code i found in the link mentioned above, that i have applied and works - but needs to be modified to meet my needs:
Sub GetImportFileName()
Dim Filt As String
Dim FilterIndex As Integer
Dim Title As String
Dim FileName As Variant
Dim newname As String
[Code].....
View 2 Replies
View Related
Aug 11, 2014
I have the following macro set up to create a folder in a directory as per the contents of 2 cells
C2 = Folder name to be created
B2= Date for previous working day
[code]....
I then have another macro that moves files into a specified folder within the same location ( I then manually move them into the folder the first macro created)
Is there a way I could get the files to move to the newly created folder without me having to do it manually.
View 4 Replies
View Related
Feb 9, 2012
I need creating a macro that i can use in a file that will open all workbooks in a specified folder. Each .xls file has a macro that is slightly different and i want to go to one book and run one macro that will make all macros run.
View 4 Replies
View Related
May 21, 2012
The following code is something that was developed to find files with certain criteria that matches references in cells A1 & A2. The coding is as follows:
Code:
Option Explicit
Option Compare Text 'for Case-Sensitive matching change Text to Binary
Sub List_Matches()
Dim sPattern As String, sPath As String, sJob As String
Dim sMainDir As String, sCommonSub As String
Dim c As Range, lRow As Long
[Code] .......
The red is the area of the code i am having problems with. The original code was going to look only in one directory, now I wanted to add a second directory with reference located in E5. Now as is the program works fine looking at directory 1 or E4, but the problem i feel is that for E5 all the folder name are named "WO#_____ - ______". I believe the # sign is not allowing it to open that folder and search for the info. In the code there is a function for solving the # sign problem in a file name, but how could i either modify the code or the function to do the same for the folder name and view the # sign as a valid file name to open?
View 9 Replies
View Related
Jun 4, 2013
I have approximately 5000 excel files in a folder with which are named by cost centre e.g 45684 (all differing lengths).
some script so I run a macro and an excel sheet captures the name of every single excel file in the folder?
View 2 Replies
View Related
Apr 7, 2009
I would like my macro to go to a certain folder- in this case N:Aexeo ClientsJabre2008Excel Diet Run, open each workbook therein ( to this end I have found the first part of the code below on another thread) and perform the ExcelDietMacro (also below). I am missing something though as nothing is happening, would anyone know from a quick glance what is wrong? Should I have these as 2 seperate Sub End Subs or combined into one? I know that the Excel Diet is correct thanks to the original designer and Rory on the forum for getting it adjusted to my needs.
Also each workbook within the folder will have the same password to open, is it possible to insert some code in the macro to do this automatically?
Sub LoopFiles()
Dim MyFileName, MyPath As String
Dim MyBook As Workbook
MyPath = "N:Aexeo ClientsJabre2008Excel Diet Run"
MyFileName = Dir(MyPath & "*.xls")
Do Until MyFileName = ""
Workbooks.Open MyPath & MyFileName
Set MyBook = ActiveWorkbook
Application.Run "ExcelDietMacro"
MyBook.Save
MyBook.Close
MyFileName = Dir
Loop
End Sub
Sub ExcelDietMacro()
'
' ExcelDietMacro Macro.........................
View 9 Replies
View Related
Jun 11, 2009
I have 400ish departmental budget files in a folder that I need to upload to a Sharepoint doc library. The files in the folder will have to exactly match the files we already have set up in sharepoint in order to upload them to the sharepoint site. As it stands now there is only one consistency between the sharepoint files and the budget files in the folder, which is the department number (which every file in both begins with).
I'm thinking some sort of macro will let me insert a sheet into each of the files in the budget folder, which would have a formula that pulls the department number from a certain sheet in the file, and produce the file name I want into a certain cell. Then I would like a macro that goes into each file and renames it based on that cell. I'd like to know if this is possible and if there may be a better way to do it.
View 9 Replies
View Related
Feb 22, 2014
I have a few similar excel files in a specific folder (for my salesman to report their sales) - let's call those files "working files" I have another file (we'll call it "master file") in a different folder, where I update values in column A - and those values needs to appear in column B in all of the working files. it is necessary that each time the macro is been activate, it will "run over" the existing values in column B in the working files, and insert instead of them the update values from the master file.
View 1 Replies
View Related
Dec 18, 2008
creating a macro, I have a list of CSV files in a folder called balances, i need a macro that will look into each CSV file and grab all p'folios which have a negative balance in Col D and line them up as per example shown below. The extracted data needs to be copied to file named "Workings" S:RecsalancesWorkings
All data in CSV file looks like this, where header row is row 1 starting at A1
CSV data
CSV filenames all start with ddmm so e.g. 0111
End DatePfolioA/c CodeA/c Native at End1/11/20081GRVMAAUDCUST 1/11/2008AFSBGEAUDCUST 1/11/2008AFSMBEAUDCUST 1/11/2008AFSPEEAUDCUST 1/11/2008AFSTRNAUDCUST 1/11/2008AMPFSVAUDCUST 16,565,587.811/11/2008GIORIQAUDCUST 155,642.251/11/2008GIORISAUDCUST 1/11/2008PINESIAUDCUST 5,654,632.861/11/2008WACCGIAUDCUST 7,457.561/11/2008WCTARIAUDCUST -3,923.721/11/2008WCTARWAUDCUST 1/11/2008WCTASIAUDCUST -73,456.201/11/2008WCTBGFAUDCUST 1,662.651/11/2008WCTDAIAUDCUST 1/11/2008WCTFUNAUDCUST 27,665,698.291/11/2008WCTGMIAUDCUST 31.251/11/2008WCTROWAUDCUST 6.961/11/2008WCTTHSAUDCUST 22,030.01
Macro to line up data as per below
P'folioDateWCTARIWCTASIWSTFDGWTDTADWTFFI3WTGTFAWTRLGD1/11/2008-3,923.72-73,456.20-4.18-136,496.19-562,967.29-2,319.40-15.762/11/2008-3,923.72-73,456.20-4.18-136,496.19-562,967.29
View 9 Replies
View Related
Apr 5, 2009
I have a folder "D:Documents and SettingsRakesh", which has many .xls files. Each file has a sheet called 'Cover Note'. I want to copy cells B2, C2, D4 and F3 from 'Cover Note' of each file.
These cells should be pasted in the current sheet, one row for each file. First cell of each row should have the source file name.
It would be better if macro can prompt to select the directory where ther source files resides.
View 9 Replies
View Related
Apr 15, 2008
I am unable to install a disk catalog and have been trying with no success to try and get something in excel that will look at a directory and display the contents of that folder with the file attributes etc
View 2 Replies
View Related
Nov 26, 2009
I wish for a macro to look in to a directory which remains constant, but then looks within a folder which is specified via a cell value in order to load a specific sheet from each file in to the workbook I am currently using. I wish for the loading to be done without having to open the workbooks manually, so something which opens them copies the data from the sheet specified and then closes.
This data is then to be pasted in to a new sheets within my workbook which are named after the file names that it pulls the "dump" sheet from.
As a side note, I will be using these sheets to produce calculations hopefully automatically as soon as they are loaded. They all have the same "shape" but contain differing data. Will it be easier in the long run for me to use this method of pasting data to new sheets named as their file names assuming there will be around 25 "dump" sheets needing to be loaded or would i be better having them paste all to one sheet just underneath each other with a couple of rows separating them?
View 8 Replies
View Related
Aug 16, 2013
i am working with a large data set of excel files . I need to format the sheets in a specified way . i have recorded a marco that does this . I now have the problem of creating an automatic loader that opens the files , carrys out my macro , then closes the files.
For example i have a folder X that has 10 files inside it. i would like to be able to load the first file , carry out the macro, close the file move it folder y . Then look back into Folder X , take the first file it see's , carry out the macro , close the file , move it folder y , the go back to folder x and carrying out this until all the files are done and stopping when the folder is empty
View 1 Replies
View Related
May 6, 2014
I have this existing macro which saves each tab into a separate excel file. However, I'd like for it to also save them together in a new folder using the current month and date (named: QA Files May_05.06.14). The month and date would change according to current month/date. How would I incorporate that into this code? I am not good with macros.
Sub tabname()
Dim ws As Worksheet
For Each ws In Worksheets
ws.Activate
ws.Name = Range("D1").Value
Next
[Code]...
View 4 Replies
View Related
Aug 4, 2009
I want to loop through all files in a directory and run a macro named "Main" in each file. The file that contain the loop-macro will stay in the same directory as the files I loop through.
View 4 Replies
View Related
Jun 23, 2013
I have obtained a piece of code from online that runs a macro on multiple files in a single given a single folder. when i implement it though it throws a run time error 424 "object required' and point to 'Documents.Open FileName:=path & file' line of code. Is this because Dim file type is not declared?how do i fix this problem. also, im using excel 2010.A
VB:
Sub Mac()
Dim file
Dim path As String
[Code]....
View 4 Replies
View Related
May 11, 2012
I'm working on a project where I need to import 150 csv files into an Excel2010 workbook, with each csv file being on a seperate worksheet.
I would like to set up a macro to point to the folder I will have these saved in this up so that each month when I get updated csv files I can repeat the process and bring in the new data. how to create this, I'm very new to VBA?
View 1 Replies
View Related
