I am trying to process 60+ data files. I've recorded/written macros that do all of the processing, and now I would like to write a loop that will go through a folder with the data files (.txt, tab delimitted), and run the code on each file. I am using the Mac Version of Excel 2004. I have tried to adapt some code that I found in the forums, but after fixing a few errors, now nothing is happening when I run the code. The code is below. I have it in a module in the VBA editor.
length of the code; I'm assuming the problem is in the very beginning or end (the code I added for the loop), as the code in the middle that does the actual processing works.
Sub ProcessData()
Dim strDocPath As String
Dim strCurrentFile As String
macro to run as a loop on all files in a given folder but allow for the option to Browse for the folder I want this to run in?
Sub CleanUp() Dim i#, rng As Range With Application .ScreenUpdating = False .DisplayAlerts = False For i = Worksheets.Count To 1 Step -1 If Worksheets.Count = 1 Then GoTo e Set rng = Intersect(Worksheets(i).[11:11,13:13,23:23,25:25], _ Worksheets(i).UsedRange) With rng .Replace What:=Chr(32), Replacement:="", LookAt:=xlPart .Replace What:=Chr(160), Replacement:="", LookAt:=xlPart End With...........................
I would like to create a Macro which does the following task. I have a Workbook Master.xlsx with a worksheet "source". The path of Master.xlsx is C:Test
In the Directory C:Testprojects i have about 50 files which all contain the String "Forecast" in their filename. These Forecast Workbooks need an update in the Worksheet "actuals"
So, i need a Macro that copies WS "source" from WB "Master" to WS actual in all WB's Forecast.
I did search but I couldn't find what I want. I have a load of .csv files in a folder. I want to loop through all files, run the macro below and close the .csv file without saving. My macro copied data onto another workbook and saves, but I don't know how to loop through all files within a folder.
I need some code that will open each file in the folder, run the macro below and close it again. I don't know how to put code tags in so I have put the code in a .txt.
I have excel files in a folder, I need a macro to loop through all files, rename them and save them in another folder. the file's name is available in a cell in each file, I am able to get the file name as text (I had to dig a little to get the text as it was between ""). Well I am stuck right now because the macro is doing what it's supposed to do for one excel file only and does not continue with the rest of the available files for a reason.
VB: Sub RenameAllFiles() Dim Bk As Variant Dim n As Integer Dim NewName As String
I want to open all csv files in a folder and just copy and paste some columns into another file. I am having a bit of trouble with the following code which can be found at ozgrid and I have modified slightly so it looks in the current directory instead of a fixed path...
Code: Sub RunCodeOnAllFiles() Dim lCount As Long Dim MyDir as string
[Code]....
For starters, if I don't use on error resume next I get a runtime error 445: object doesn't support this action. So when I use the on error resume next, then by the time it gets to the foundfiles line, there are no variables set, so on the next line (workbooks.open) nothing happens.
Is there an easier (more up to date?) method to open all csv files (or excel files) in a folder?
I have a set of workbooks-all located in the same folder-in which data are shown "horizontally"
i.e. file 1 - sheet1 looks more or less like this:
1 2 3 4 5 6
same with the other files.
what I am trying to achieve is that in another woorkbook, all the data are copied in one vertical vector
i.e
1 2 3 4 5 6 from file 1 and then 1 2 3 4 5 6 from file 2
I can seem to be able to resize the array to the correct size but the only values copied are for the last file. in the example that I have above, the result would look something like:
I have two pieces of code that each work, but I am struggling to combine the two.
I started with Ron de Bruin's code to attach multiple files to an email and then found more code that will loop through a folder to attach multiple files to an email.
Essentially, I would like the structure of Ron de Bruin's code, with the ability to have folder paths in the cell range, rather than file names.
Here is the code that works to loop through a folder, but it only works when I have the paths listed in one column, not in a range (e.g. columns C-Z)
Code: Sub Send_Indv_Files() Dim OutApp As Object Dim OutMail As Object
I found the following code to execute a macro in all excel files in a folder. Sounds amazing! I have a code to add to it, however I am having issues getting it to work. take a look at it and let me know what (more like, how many things). I am adding this to the Sheet 1 Worksheet.
Here is a macro I have found and manipulated for my particular case. The problem is that I want to narrow the search criteria by just pdfs and only those starting with Segment which i know in coding would be something like "Segment" & "*" & ".pfd" or something to those terms but the code uses objects which I'm not too familiar with.
Code: Sub ListAllFile()
Dim objFSO As Object Dim objFolder As Object Dim objFile As Object Dim ws As Worksheet
Set objFSO = CreateObject("Scripting.FileSystemObject") Set ws = Sheets("Simple Cut Lists (2)")
I have following problem, discribed also in the link above.
I need a vba code to
- choose a folder instead of a file - find all the files in the chosen folder with name that starts with "sz" and end with "_d" - rename those files by replacing the first 5 numbers that follow sz with 5 different numbers that the user can choose e.g. through a user form.
I imagine the user to open the excel file, click on a form thats linked to a macro. The macro will call a userform and ask the user to choose the folder and type in a textbox the 5 new numbers.
I need the code that will be pasted behind the "OK" button in the userform.
Is this possible with vba?
Here a code i found in the link mentioned above, that i have applied and works - but needs to be modified to meet my needs: Sub GetImportFileName()
Dim Filt As String Dim FilterIndex As Integer Dim Title As String Dim FileName As Variant Dim newname As String
I have the following macro set up to create a folder in a directory as per the contents of 2 cells
C2 = Folder name to be created B2= Date for previous working day
[code]....
I then have another macro that moves files into a specified folder within the same location ( I then manually move them into the folder the first macro created)
Is there a way I could get the files to move to the newly created folder without me having to do it manually.
I need creating a macro that i can use in a file that will open all workbooks in a specified folder. Each .xls file has a macro that is slightly different and i want to go to one book and run one macro that will make all macros run.
The following code is something that was developed to find files with certain criteria that matches references in cells A1 & A2. The coding is as follows:
Code: Option Explicit Option Compare Text 'for Case-Sensitive matching change Text to Binary Sub List_Matches() Dim sPattern As String, sPath As String, sJob As String Dim sMainDir As String, sCommonSub As String Dim c As Range, lRow As Long
[Code] .......
The red is the area of the code i am having problems with. The original code was going to look only in one directory, now I wanted to add a second directory with reference located in E5. Now as is the program works fine looking at directory 1 or E4, but the problem i feel is that for E5 all the folder name are named "WO#_____ - ______". I believe the # sign is not allowing it to open that folder and search for the info. In the code there is a function for solving the # sign problem in a file name, but how could i either modify the code or the function to do the same for the folder name and view the # sign as a valid file name to open?
I would like my macro to go to a certain folder- in this case N:Aexeo ClientsJabre2008Excel Diet Run, open each workbook therein ( to this end I have found the first part of the code below on another thread) and perform the ExcelDietMacro (also below). I am missing something though as nothing is happening, would anyone know from a quick glance what is wrong? Should I have these as 2 seperate Sub End Subs or combined into one? I know that the Excel Diet is correct thanks to the original designer and Rory on the forum for getting it adjusted to my needs.
Also each workbook within the folder will have the same password to open, is it possible to insert some code in the macro to do this automatically?
Sub LoopFiles() Dim MyFileName, MyPath As String Dim MyBook As Workbook MyPath = "N:Aexeo ClientsJabre2008Excel Diet Run" MyFileName = Dir(MyPath & "*.xls") Do Until MyFileName = "" Workbooks.Open MyPath & MyFileName Set MyBook = ActiveWorkbook Application.Run "ExcelDietMacro" MyBook.Save MyBook.Close MyFileName = Dir Loop End Sub
Sub ExcelDietMacro() ' ' ExcelDietMacro Macro.........................
I have 400ish departmental budget files in a folder that I need to upload to a Sharepoint doc library. The files in the folder will have to exactly match the files we already have set up in sharepoint in order to upload them to the sharepoint site. As it stands now there is only one consistency between the sharepoint files and the budget files in the folder, which is the department number (which every file in both begins with).
I'm thinking some sort of macro will let me insert a sheet into each of the files in the budget folder, which would have a formula that pulls the department number from a certain sheet in the file, and produce the file name I want into a certain cell. Then I would like a macro that goes into each file and renames it based on that cell. I'd like to know if this is possible and if there may be a better way to do it.
I have a few similar excel files in a specific folder (for my salesman to report their sales) - let's call those files "working files" I have another file (we'll call it "master file") in a different folder, where I update values in column A - and those values needs to appear in column B in all of the working files. it is necessary that each time the macro is been activate, it will "run over" the existing values in column B in the working files, and insert instead of them the update values from the master file.
creating a macro, I have a list of CSV files in a folder called balances, i need a macro that will look into each CSV file and grab all p'folios which have a negative balance in Col D and line them up as per example shown below. The extracted data needs to be copied to file named "Workings" S:RecsalancesWorkings
All data in CSV file looks like this, where header row is row 1 starting at A1
I have a folder "D:Documents and SettingsRakesh", which has many .xls files. Each file has a sheet called 'Cover Note'. I want to copy cells B2, C2, D4 and F3 from 'Cover Note' of each file.
These cells should be pasted in the current sheet, one row for each file. First cell of each row should have the source file name.
It would be better if macro can prompt to select the directory where ther source files resides.
I am unable to install a disk catalog and have been trying with no success to try and get something in excel that will look at a directory and display the contents of that folder with the file attributes etc
I wish for a macro to look in to a directory which remains constant, but then looks within a folder which is specified via a cell value in order to load a specific sheet from each file in to the workbook I am currently using. I wish for the loading to be done without having to open the workbooks manually, so something which opens them copies the data from the sheet specified and then closes.
This data is then to be pasted in to a new sheets within my workbook which are named after the file names that it pulls the "dump" sheet from.
As a side note, I will be using these sheets to produce calculations hopefully automatically as soon as they are loaded. They all have the same "shape" but contain differing data. Will it be easier in the long run for me to use this method of pasting data to new sheets named as their file names assuming there will be around 25 "dump" sheets needing to be loaded or would i be better having them paste all to one sheet just underneath each other with a couple of rows separating them?
i am working with a large data set of excel files . I need to format the sheets in a specified way . i have recorded a marco that does this . I now have the problem of creating an automatic loader that opens the files , carrys out my macro , then closes the files.
For example i have a folder X that has 10 files inside it. i would like to be able to load the first file , carry out the macro, close the file move it folder y . Then look back into Folder X , take the first file it see's , carry out the macro , close the file , move it folder y , the go back to folder x and carrying out this until all the files are done and stopping when the folder is empty
I have this existing macro which saves each tab into a separate excel file. However, I'd like for it to also save them together in a new folder using the current month and date (named: QA Files May_05.06.14). The month and date would change according to current month/date. How would I incorporate that into this code? I am not good with macros.
Sub tabname() Dim ws As Worksheet For Each ws In Worksheets ws.Activate ws.Name = Range("D1").Value Next
I want to loop through all files in a directory and run a macro named "Main" in each file. The file that contain the loop-macro will stay in the same directory as the files I loop through.
I have obtained a piece of code from online that runs a macro on multiple files in a single given a single folder. when i implement it though it throws a run time error 424 "object required' and point to 'Documents.Open FileName:=path & file' line of code. Is this because Dim file type is not declared?how do i fix this problem. also, im using excel 2010.A
I'm working on a project where I need to import 150 csv files into an Excel2010 workbook, with each csv file being on a seperate worksheet.
I would like to set up a macro to point to the folder I will have these saved in this up so that each month when I get updated csv files I can repeat the process and bring in the new data. how to create this, I'm very new to VBA?
