I've tried to record macro, placed formula in row 4 only, copy and paste it to the end of row, and make it value. My database begin form column AM to BG.
Sub UPDATE_DATABASE()
'
' UPDATE_DATABASE Macro
' Macro recorded 2/22/2010 by FAUZAN
'
Sheets("database").Select
Range("AM4").Select
Selection.Copy
Range("AM5").Select.........
I've recorded a Marco copying and pasting information from one cell to other cells and some of the copying functions paste to two cells. I just need this to loop through all information I'm copying from the the new cells.
Range("I1").Select
Selection.Copy
Range("D1").Select
ActiveSheet.Paste
Range("J1").Select
[Code]...
I got a macro to copy and paste values onto another tab within my worksheet. I have a lot of data and currently takes about 30 seconds to calculate and paste. Not sure if its an issue with my macro or with my computer (Mac - Excel 2011).
Here is an example of my macro:
Sub SimulateWeek()
If Range("AdvanceWeek").Value = "Week 1" Then
Range("Week1B").Copy
Sheets("Schedule - Results").Range("C2").PasteSpecial Paste:=xlPasteValues
[Code]....
(this continues on until 'ElseIf Range("AdvanceWeek").Value = "Week 31"....etc). So you can see I have the same code repeated 31 times.
I have code which copies Range("A1") and pastes into Range("c1").Then it loops to copy a2,a3,a4 and pastes in the same cell c1.
I just want to copy a1 and b1 instead of just a1 and paste into cell c1& c2.Then loop to copy a2&b2 till end.
[Code] ......
I have a spreadsheet that calculates a rolling percentage of a row of numbers. The formulas are contained in two columns, J and K. The first row is a header row, and the formulas repeat every 52 rows (e.g. J2:K53, copy paste those cells, re-paste at J54, then J106, and so on. Because I don't know how to loop, I've had to manually right in the paste every 52 rows in my line of code. Surely there is a way to have this cut down and to actually stop when there are no more rows of data. For the record, this continues on manually until 80,000 because I don't know how to stop it at the last row.
Code:
Sub CopyPasta()
'
' Copy_Paste_52 Macro
'
'
Range("J2:K53").Select
Range("K53").Activate
Selection.Copy
Range("J54").Select
[code]....
I was unable to get a loop to reliably run my analysis, and I have locked in specific cells that cannot change, and anything unlocked will need to copy/paste from the row below. I will need this to continue this loop until the dates from the Range B8-B1500 end (Output Tab).
[Code] .....
Excel 2002.I have data in columns A and B on sheet 3, starting at row 100. The total number of rows of data is variable (max is 50 rows). I want to take the values in A100:B100 and copy them from Sheet3 and paste values transposed to SheetTL Range C1:C2. I have started to write the following code but as you can see I will have to repeat the code upwards of 50 times. It seems I should be able to do a COUNT function to see how many rows of data exist and then somehow loop the code to copy the data from each subsequent row that many times, but how to put that together.
Sheets("Sheet3").Range("A100:B100").Copy
Sheets("TL").Range("C1").PasteSpecial Paste:=xlPasteValues, Transpose:=True
ActiveSheet.PrintOut
If Sheets("Sheet3").Range("A101") = "" Then
[Code] .........
I would like to create a list of all the sheet names I have in a given workbook. Is there a simple way to do this through VBA?
View 6 Replies View RelatedI am trying to get the formulas to work on Sheet 3, the rows formated to percentages correctly, but they are not reading the totals in row 2 to make the formula complete. I also want this to run more than one number, I would prefer a range for example value >= 1.29 so that Sheet 3 shows all items less than 1.29.
View 4 Replies View RelatedI have a workbook with many sheets, basically all the sheets are almost the same template with fill-in information for different type of jobs, and for the most part, the information is located in the same areas in each sheet.
I need to look in each sheet for a cell labeled, Committee ID:
And then copy it and the cell to the right of it, so for example:
A8 hasCommittee ID:
B8 hasC1234N
So, loop through all the sheets and get these values and then paste them into a new sheet in the same workbook and call that sheet Report. When pasting data into the Report sheet, insert a space between each result.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
I've created an Excel 2007 workbook with about a dozen worksheets that are full of formulas and links to other workbooks, as well as conditional formatting that isn't backwardly compatible with Excel 2003. However, many people who want to see this workbook are still on Excel 2003. I need to recreate an Excel 2003 compatible workbook with the appearance and formatting of the original and have all the formulas and links converted to values. So, the final product will "look" just like the original without the conditional formatting, links or formulas. It will just have the look, colors and values displayed for all cells.
Essentially, I want a macro that will copy however many worksheets (1-n) are in an Excel 2007 workbook to a new Excel 2003 workbook. I'd like the worksheets to retain their label names as well.
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
We have a workbook that we create each month that has one worksheet per day of the month, labeled 12_01_2011, 12_02_2011, 12_13_2011...etc. The pages are an empty template with formulas and fields in place that we simply copy and paste the results of an SQL query into. Presently, we are copying the page manually several times over, and then manually renaming the pages with the new dates for the upcoming month.
So, here is my question. Macro that I might use that would:
1) Make a copy of the template for each day of the month.
2) Label each page in sequence with the dates for the upcoming month.
I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
I tried writing a macro to copy data from one tab and paste it on another. It gave me an error message every time.
So I tried recording one doing just that, and when I went to play it, it still gave me an error.
So here is what I came up with:
I have a total of 30 sheets in my workbook. I would like to copy rows 21:1000 from sheets 5 - 27 and paste them into sheet 4 starting on row 21. The data ranges vary within sheets 5 - 27. For example, sheet 6 has data in rows 21:50, whereas sheet 10 has data in rows 21:500. I chose 21:1000 as a safe measure to ensure that all data starting on rows 21 onward gets copied.
I am having trouble thinking of how to create a macro which will copy the data from sheets 5 - 27 and paste into sheet 4 leaving no blank spaces in between pasted rows. Ultimately my goal is to use the filter boxes I have set up in the column headers of sheet 4 to quickly sort all the data pasted from sheets 5 - 27.
im trying to record a macro that allows me to copy b22-b25 so i can copy it sp its on my clipboard to use in other applications
but i have this and it doesnt allow me to paste
I need a macro that will copy row 7, then let user select desired row, then the macro will paste the copied row onto it.
View 5 Replies View Relatedi'm currently building a project with VBS2008, i'm currently stuck on 2 things.
I have the beginning of my code here(it's a button):
Private Sub Button14_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button14.Click
Shell("C:Program FilesMicrosoft OfficeOFFICE11EXCEL.EXE")
AppActivate("Adobe Reader")
'copy stuff wants to go here
'Then i want to paste into Excel
AppActivate("Microsoft Excel")
'Then run a macro
(PERSONAL.XLS!Eden)
End Sub
Adobe Reader will always be running.
I'm trying to copy all text data from Adobe and paste it into Excel. I'm having trouble trying to mimic pressing [Ctrl-A] [Ctrl-C] and then mimic the paste [CTRL-V] into excel, then running the Macro in Excel.
I have a requirment to be able to copy a data range from one sheet to another. However each time the macro is run I need to be able to change the ROW the data is pasted to via user input.
EG First time macro is run, range to be copied from sheet 1 is A1:D1 and then pasted to sheet 2 range A5:d5.
the second time the macro is run I need to tell it to paste the data from Sheet 1 A1:D1 to Sheet 2 range A6:D6.
I guess the ultimate way to achieve my need would be for excel to find the last row of data on sheet 2 and automatically paste to the next free row, but thats way beyond me.
i am trying to record a macro that copies and pastes data from a webpage into a sheet in excel and then copies and pastes different data from a different webpage into another sheet in excel.
when i replay the macro it just pastes the same data twice instead of 2 different sets.
i am obviously making a basic error - is the way i copy and paste?
I have an index page with all my employee numbers and a summary page.
All my employees work on a time payment basis.
So for every Employee there is a worksheet with a calculator that determines their working hours.
I need a macro that copies the information on every worksheet to the summary worksheet.
On the worksheets the information is in calls: A53:F53
The Macro needs to paste that information under each other. So for instance employee 255 has a worksheet with the label of 255. His information needs to be pasted in the summary in cells A2:F2.
The next employee is 503, he also has a worksheet with the label of 503. his information is in cells A53:F53 (the same for all the employees). This needs to be pasted to the summary page in Cells A3:F3 (underneath employee 255)
I have 802 worksheets and 1 Summary. All the information for all the employees is in A53:F53.
I tried to do a record macro, it worked but excel gives me an error that sad : Procedure to long.
this is the code that i used:
Sheets("002").Select
Range("A53:F53").Select
Selection.Copy
Sheets("Summery").Select
Range("A2").Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Every employee has a coding like this..... so you can understand that excel thinks the procedure is to long.... ha ha ha..
I need the macro to paste only values and not the formula.
I have an excel form that I fill out when I service a vehicle. This form has a couple of cells that I would like to transfer to different workbooks by way of a macro.
The form cells that I want to transfer are labeled as follows:
InvoiceNumber or cell Q3
Date or Cell R5
TotalLabor or cell R31
TotalParts or cell G31
Tax or cell R40
I have 3 external files named:
Tax - this file has 4 columns: Date, InvoiceNumber, Tax
Parts - this file has 4 columns: Date, InvoiceNumber, TotalParts
Labor - this file has 4 columns: Date, InvoiceNumber, TotalLabor
I would like to have each external file copy the info into the next row and keep a running total at the bottom.
I would now like to adapt it to do something else. The code is as follows:
Sub addtaskstnmtce()
ActiveSheet. unprotect
Application.DisplayAlerts = False
myrow = Cells. Find(" Total Station Electrical / Cable / Mechanical / Civil Maintenance Estimate").Row - 6
mycell = Cells(myrow, 2)
mynum = Right(mycell, Len(mycell) - InStr(mycell, "#")) + 1
With Range(Cells(myrow, 2), Cells(myrow + 5, 2))
.EntireRow.Copy
.EntireRow.Insert Shift:=xlDown
End With
Application.CutCopyMode = False
Cells(myrow + 6, 2) = "Task#" & mynum
Application.DisplayAlerts = True
ActiveSheet.protect
End Sub
i have two work sheets open. with the press of a button on the screen, i need a selection of the sheet to be coppied, different data per button clicked. In the other open sheet depending on which button the user clicks on, i need that data to be pasted. I have tried it by using the record button, but when i have finished recording, the paste option does not come up in the next sheet. I know it can be done manualy, but i have lots of data all over the place.
View 4 Replies View RelatedMy application requires the user to use a check box to copy live date in a row, into the row that the perticular check box is in.
View 3 Replies View RelatedI have a financial model (attached) which calculates the final cash flows (in a calculation sheet named 9.Operations, rows 428 to 437) for a particular plot. However,the model has a list of 17 plots in the input sheet (3.Input-Plot Details). The macro must change the plot number in the 9.Operations sheet(cell G11), re-calculate the final cash flows and paste all the final cash flows for 1 to 17 plots in a single separate sheet consecutively.
View 6 Replies View Relatedsee the attached file below. I have monthly precipitation data for yrs 1950-1999. I need to have the data formatted such that the precipitation data is copy/pasted into one single column, going all the way from jan 1950 to feb 1950 (next row) to mar 1950 (next row).....dec 1999 (last row). On occasion, I will also have data for shorter/longer time periods. the macro code I'd need to take this data and line it all up into one single column?
View 7 Replies View Related