I've recorded a Marco copying and pasting information from one cell to other cells and some of the copying functions paste to two cells. I just need this to loop through all information I'm copying from the the new cells.
Range("I1").Select
Selection.Copy
Range("D1").Select
ActiveSheet.Paste
Range("J1").Select
[Code]...
I have code which copies Range("A1") and pastes into Range("c1").Then it loops to copy a2,a3,a4 and pastes in the same cell c1.
I just want to copy a1 and b1 instead of just a1 and paste into cell c1& c2.Then loop to copy a2&b2 till end.
[Code] ......
I've tried to record macro, placed formula in row 4 only, copy and paste it to the end of row, and make it value. My database begin form column AM to BG.
Sub UPDATE_DATABASE()
'
' UPDATE_DATABASE Macro
' Macro recorded 2/22/2010 by FAUZAN
'
Sheets("database").Select
Range("AM4").Select
Selection.Copy
Range("AM5").Select.........
I am a complete amature at Marco's and formulas. I have been trying to create what i need but i am unable to get it to work. I have a worksheet named "Course dates incl. pursuit" which has a table which runs from B7 to J144 in the table it has date, number, name, location, job, area, notifified, on system and passed?. in that order. I want if the passed column which is in J if that has a Y in it to copy and paste into another worksheet on the next avaliable line, worksheet name "Master."I would like it in a slightly different order if that is possible they have the same titles on the table but would like it to go number, name, location, job, area and date. Running from B5 to G(end of spreadsheet). That is the main part i would also like to to copy and paste into another worksheet if the answer is "N" but the above part is the most important part. Due to the computer settings i am unable to attach it
View 6 Replies View RelatedWhat I would like a macro to do is take information from cells A1 to P1 on sheet1 and add them to the table in sheet2 and then I can save the workbook. The information in A1 to P1 is taken from other cells around the workbook. Once the information is in sheet 2 I can delete or change the informtion in sheet 1 without it affecting the copied information in sheet 2.
The next time I open the workbook I can enter the information in cells A1 to P1 on sheet1 then run the macro again and will then take the information and add it to the bottom of the table in sheet2 underneath the previous information that had been added - obviously the source of this information will now be deleted.
I will need to do this again and again building up the table in sheet2. The table will also use columns A to P like in sheet1.
I have been using the "record macro feature". What I want the macro to do is as follows.
1. cut all data from column C and paste it into G.
2. Use the textTocolumns feature to split a comma delimited string into 2 seperate columns.
3. user the textToColumns feature to remove any leading spaces from column G.
4. cut columns d-H and shift them left startign in column C.
I can do all of this find bu using the GUI while recording the macro but when I check the vb script it's completely missing the paste commands.
When I try and run the macro it, quite rightly, returns "run-time error '1004':No data was selected to parse.
Below is the resulting recorded macro.
How do I amend this macro do include pasting the cut data?
I tried all failed.We have about 160 different workbooks (one for each business unit) stored online. Staff enters information about their weekly revenue and expenses and here at head office I collect that information and consolidate them.What I am trying to do is that;1.) Create a master Workbook with ~160 worksheets (One worksheet for each unit) named exactly the same with other workbooks2.) And macro can pull the information from related files stored in a certain folderIt is very much like another members problem but I am not sure why I cant get that code working for me? [URL]
View 5 Replies View RelatedWhat I have is a list of selected employees, with the site they work at next to them.
What I need is a macro which looks at the site they work at, references it with an address table in a separate worksheet and then pastes the site address along with the employee's name onto a thrid worksheet which will be used to print post labels.
>Look at which site the employee works at (Sheet 1, D:D)
>Find the address of said site (Sheet 3)
>Paste the relevant address along with the employees name (Sheet 1, B:B) into a separate worksheet.
This will be done weekly, and I need the macro to either only work on the latest's weeks table, or to just work with the current active selection. Any better way to layout my table.
I have a spreadsheet that calculates a rolling percentage of a row of numbers. The formulas are contained in two columns, J and K. The first row is a header row, and the formulas repeat every 52 rows (e.g. J2:K53, copy paste those cells, re-paste at J54, then J106, and so on. Because I don't know how to loop, I've had to manually right in the paste every 52 rows in my line of code. Surely there is a way to have this cut down and to actually stop when there are no more rows of data. For the record, this continues on manually until 80,000 because I don't know how to stop it at the last row.
Code:
Sub CopyPasta()
'
' Copy_Paste_52 Macro
'
'
Range("J2:K53").Select
Range("K53").Activate
Selection.Copy
Range("J54").Select
[code]....
I was unable to get a loop to reliably run my analysis, and I have locked in specific cells that cannot change, and anything unlocked will need to copy/paste from the row below. I will need this to continue this loop until the dates from the Range B8-B1500 end (Output Tab).
[Code] .....
Excel 2002.I have data in columns A and B on sheet 3, starting at row 100. The total number of rows of data is variable (max is 50 rows). I want to take the values in A100:B100 and copy them from Sheet3 and paste values transposed to SheetTL Range C1:C2. I have started to write the following code but as you can see I will have to repeat the code upwards of 50 times. It seems I should be able to do a COUNT function to see how many rows of data exist and then somehow loop the code to copy the data from each subsequent row that many times, but how to put that together.
Sheets("Sheet3").Range("A100:B100").Copy
Sheets("TL").Range("C1").PasteSpecial Paste:=xlPasteValues, Transpose:=True
ActiveSheet.PrintOut
If Sheets("Sheet3").Range("A101") = "" Then
[Code] .........
I want to insert some data in a number of cells (e.g. A1, B4, C4 and H8) on a worksheet ('Sheet 1').
I then want to press a button and have some code that:
Looks at column B on 'Sheet 2'
Finds the next empty row Copies and pastes the information from Sheet 1 into specific cells in that empty row.
I need a macro to copy and paste cells from one worksheet to another, if there is the word true in the column L of that row.
View 10 Replies View RelatedI am using the following macro which copy and paste certain info from one sheet to another. The macro I am using is
Code:
Sub test()
With Sheets("Invoice")
.Range("A4:C17").Copy
Sheets("Transactions").Range("b" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues
End With
End Sub
Is it possible to copy the value of B2 in the sheet (Invoice) as well and paste it for as many entries there are in the rows 4:17 in the sheet "Transactions". For example say i have items in row 4:10 when it copies the info to the sheet Transactions then it must copy the entry that is in B2 on sheet Invoice also in column a 4:10.
I have recorded a macro to sort a range of cell based on two values that is dependent on time in another cell. I now want the macro to run automatically when refreshing the workbook with F9, so as the time changes so will the sorting. Everything works fine except the sorting doesn't refresh when F9 is refreshed.
My recorded macro is:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim X As Long, FillCT As Long
For X = 1 To 4
If Cells(Rows.count, 1).End(xlUp).Offset(0, X - 1) <> "" Then FillCT = FillCT + 1
[Code] .....
I have a set of data on sheet1 indicating test scores and basic information. At the top of the data, I have some drop-down menus that allow me to select certain minimal score results. I used conditional formatting to highlight the rows of individuals that meet the selected criteria from the top of the screen. You will notice in the screenshot, that I placed a button at the top called "Go!". Ultimately, I'd like for when I push the "Go!" button, Excel will copy the highlighted cells and paste them into sheet2 (beginning on row 2 as I have a title bar in row 1).
ExcelSnippet.JPG
write a macro - Condition: When i select "Audit Round" = "Round 1" in B2 and press a button it will automatically copy data from B5:B8 and paste special value in C5:C8. Likewise if I select "Audit Round" = "Round 2" in B2 then it should lookup "Round 2" in "Row 4" and paste special values from B5:B8.
Here an example:
A
B
C
[Code]....
1. In whatever cell is selected when the macro is run, enter a new row.
2. Copy the information from the row directly above the new row and paste (values, formulas, formats, etc) into the new row.
3. Return to column P in the new row, i.e if the new row is row 11, then return to P11, for row 12 return to P12, etc.
I have tried recording the macro but because it is hard coded to specific rows, its not working. I have attached a sample copy of the sheet (had to zip due to the size of the file).
I want to copy text from a range of individual cells and then paste all of the individual cells copied and paste this data into a single cell with all the text separated by hyphens between the texts.
Example attached
If you are a macro writer i have a project that i need to complete. you will be compensated for your time.
I am currently using some code to copy a list of visible cells in column J and paste them in the same row in column F.
For some reason this code takes a long time to run, but it does work. I have to call it twice in my routine, and it can take up to 3 minutes per piece.
I was thinking about a way to speed it up, and I thought would it be possible to loop through a set of only visible cells in J and paste those values via Offset to F?
That being said, I've tried to do this, but not having much luck.
Here is the code that I am using which takes so long.
Code: ....
I have a macro that transfers (copy/paste) information from one master file to several other individual files. The macro works, but I would like
to enhance it by have it spit out errors in the process as follows: if cell A42 on file VP1.xls is not equal to Cell C35 on file Masterfile.xls then make cell E2 ERROR and fomat E2 bold-red, otherwise do nothing. The macro should continue regardless, I just want it to spot errors.
I think this is pretty simple is just a matter of inserting an IF formula in the macro which is something i don't know how to do yet.
I have the following VBA code in Excel that looks in sheet called mri.txt for a cell called “AcquisitionMatrix”, Then goes one cell down and two cell to left and copy them all into Application.Workbooks(imgMain).Worksheets("Sheet1").Activate cell “AC2”, But for some reason it copies the field’s name as well such as:
AcquisitionMatrix , 0, , 256, , 256,.
Is there a way to avoid copying the filed name into cell AC2? Such as :
0, , 256, , 256,?
here is the
I have a spreadsheet that contains data that is currently split up into 2 or more cells. Sometimes it's 2 cells, sometimes 3, even 4, etc. I would like to right click on multiple adjacent cells, select copy, right click on another cell and paste these multiple cells into 1 cell. I checked paste special but didn't really find anything. I'm not sure a formula/macro would work either as I need to manually determine which cells need this attention.
View 2 Replies View RelatedI have to take data from about 10 rows and then paste them into ONE cell . . . any easy way of doing that without VBA or concatenating?
Example -
Move -
Jeff
Bob
Joe
Mary
into Jeff Bob Joe Mary
I use few cells with formula and I would need when I click on the cell to run a macro that would copy the selected cell and do a paste value.
View 2 Replies View RelatedI want to make macro that copies values in a1 to a100 to cell c10 everytime I click enter.(first enter a1 to c10,second enter a2 to c10 and so on to the end of the list).
View 8 Replies View RelatedI am trying to write a macro that is able to take a "Part ID" from a column on Sheet "Temp", search sheet "Parts" for that "Part ID" in Column A, copy the corresponding description (listed in next column B) and paste that description into a third sheet "Sheet1" Column D. I would then need to repeat for all lines in sheet "temp"
I could most likely use an IF statement to do the search, but I was hoping to use excel's search function to make it quicker as there are over 1000 parts. For example:
Dim partID = String
Selection.Find(What:= partID, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
What I am getting stuck on is once the search finds my text in Column A of Parts, how to copy the Description in Column B into Column D of "Sheet 1". A sample file is attached. The output in Column D of "Sheet 1" should say in this example:
Circle
Square
Circle
Rectangle
I want to find data from a certain point and paste this to a cell. My objective is to get all the data on too one row. This row is always 1 in col M called Run#. The find locations never change, just the data being copied always changes . Heres example,
In col K find FHBASC and look across to the right 3 cells in col N and copy.
Look in col M and find 1, paste above copied data into col GI.
Then move down rows to next FHBASC and repeat process until end of sheet.
If I can get a very basic simple macro to do this, then hopefully I can just re write to suit my other data.
- A database sheet called 'QAEQUIP' which contains information on the movements of pieces of equipment. This information in in order of Column A which is a movements reference number.
- A reporting sheet called 'Email sheet', which you put in a month and year and using macros it copy and pastes the relevant rows from the database and puts them in date order (e.g. put in October 2013 and it will show all of the equipment moves that happened in October 2013, and in date order).
What my end user would like, is to be able to add text to an extra column on the reporting page which gets fed into the database on the corresponding row. What would the best way to do this be? I was thinking VBA for each row (there aren't that many rows) that says if this cell is changed, copy and paste the cell into the corresponding row / column on 'QAEQUIP'.
I have a table like this:
1/2/14
2345
1/6/14
34665
1/7/14
5473457
For Column A-I would like to create a macro that will copy the info from cell A1 and paste in in A2. This will continue all the way to the last row containing info which will vary. So after the first copy/paste, it well go to A3 and copy paste onto A4, A5 will copy and paste onto A6 etc.
For Column B- The same only it will copy the contents of B2 and paste it on B1, B4 copy/paste to B3 all the way until the last row of data.