I'm trying to write a code to make a number of buttons visible depending on a cell value
I have 10 command buttons all are invisible and I want to show only the first x x is the value of cell "A1" in "Sheet1" (will be from 1 to 10) Command buttons names are default names (CommandButton1, CommandButton2, ... , CommandButton10)
Note: I'm working with a worksheet not a userform
Code to create buttons on a userform. I have adapted his code to do what I want. The code he gave me was:
[Code]....
In the Class Modules:
[Code] ........
All buttons when created are coloured yellow. When a button is clicked, it turns blue (to indicate that the button was clicked. However, my problem is that when another button is clicked, it also turns blue as coded. This means that both are showing blue colour. I want all other buttons to turn yellow and only the button clicked should turn blue.
Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
I am trying to create a program to automate the gauging figures on oil barges, currently everything is done by hand and takes approximately 20 minutes to complete. I have the charts entered for the tanks already and have the code set so that when you click on a tank "gauge" it will enter the "volume" which corresponds to that gauge on a totals sheet. Here is where my problem is coming in
The barges are gauged at four points
"before loading"
"after loading"
"before discharge"
"after discharge"
I want to set a worksheet as the default page with four command buttons that let the user select which operation he wants to perform. before load figures. after load figures and depending on which operation they select have it enter the volumes in the appropriate cells on the totals sheet. So if someone selects "loadopen" command button I want the following code to run on my worksheets............................
I have this code for 10 Command Buttons to change the font colour. This is part of a much larger piece of code, but to simplify it, I am just using this
Sub ForeColour()
Sheet1.Cat1.ForeColor = &HC0&
Sheet1.Cat2.ForeColor = &HFF0000
Sheet1.Cat3.ForeColor = &HFF0000
Sheet1.Cat4.ForeColor = &HFF0000
Sheet1.Cat5.ForeColor = &HFF0000
Sheet1.Cat6.ForeColor = &HFF0000
Sheet1.Cat7.ForeColor = &HFF0000
Sheet1.Cat8.ForeColor = &HFF0000
Sheet1.Cat9.ForeColor = &HFF0000
Sheet1.Cat10.ForeColor = &HFF0000
End Sub
In Excel 2003, this code works instantaneously, but I am trying to run the same code in Excel 2000 and it takes 10 seconds. Is there any way that I can speed this up in Excel 2000?
The original file was created in Excel 2003, but I have created a new file in Excel 2000 with the 10 buttons on it and the code and it still takes 10 seconds.
I am trying to use a For Next loop to loop through several option buttons on a worksheet in order to set the value of each to false. I cannot seem to get the code right.
View 2 Replies View RelatedI am trying to provide a search string and then loop round searching for this search string until the beginning find cell is found again however I am having problems making my code work - here it is:
View 2 Replies View RelatedI have a range of cells (A1:D5) identified within a worksheet (worksheetA) as part of a user input form.
When a certain condition exists, a routine is executed that copies a range of cells (C1:F5) from another worksheet (worksheetB) to this defined range. The copied area consists of two command buttons. They get copied and pasted no problem.
When I want to reset (blank it out of its contents) my range in worksheetA from I copy another range over of just a range of blank shaded cells. However, doing this does not eliminate the command buttons left in the range on previous pasting.
How do I delete these command buttons left from previous pasting activities when I wish to reset my range?
I have been having an internal debate of how my worksheets shoud be configured.
My workbook could potentially contain 300+ worksheets, 10 control buttons and around 20 macros.
Each worksheet contains data in a range ~ A1:AC40 with many blank cells.
Do you think a workbook with this many worksheets would be unmanageable given the Comp Spec of the user PC below?
Most of the cells are simply short text data.
System info
Processor: 2.3Ghz Dual Processor
RAM: 2GB
32bit
i try run macro with commandbutton, but it doesnt work. I insert button from "control toolbox" then i create a macro. Then i wrote this macro to "Private Sub" but it still doesnt work.
When i click on button, it only open editing macro, or select the button.
I made a userform to calculate the net weight of a package by taking the gross weight and deducting the amount of boxes included in the package. The most boxes possible is 25, so I used 25 command buttons numbered 1 to 25, so users only have to press the desired amount of boxes for the calculation to begin.
But that also means I've got 25 subs containing the same formula, and that's a bit much. I'm pretty sure this could be done more efficiently,
I have a multiple of command buttons that I want to make visible. I have the following code which I am trying to get to work. Maybe I am barking up the wrong tree.
View 2 Replies View RelatedI can't write macros, so have to create them by actually recording the process. I did that just now and then copied it into the Command button. When I run it from Tools>Macros, it works, but when I run it using the Command button it fails.
I'm trying to copy and paste values current MTD figures (P18:P39) to previous MTD area (W18:W39), but the command button fails at this selection. Cells 28-35 are blank, but I don't think this makes any difference, as I've tried the command button with those cells zeroed out.
This is what I recorded initially; this works from Tools>Macros
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 04/01/2008 by Lucertola
'
'
Sheets("Reconciliation").Select
Range("P18:P39").Select
Selection.Copy
Range("W18").Select.....................
I have a workbook with some command buttons that I created a while back. The buttons used to work fine. But after installing a new computer, the spreadsheet no longer works. I can step through the code fine, but when I try to click on the button, nothing happens.
View 9 Replies View RelatedIs it possible to create a number of command buttons, depending on the number of lines on a worksheet, and then have the code attached to the command buttons execute based on the position of the buttons on the sheet. For example, if I have a button positioned over, say A3, can the code execute based on the content of another cell in the same row. I imagine that the button would have to be linked to the cell, but I cannot see how that is achieved.
View 8 Replies View Relatedi am trying to access buttons like ' Format - Column - Hide'
View 5 Replies View RelatedI was creating command buttons and had trouble using the linked cell. I found an example on the forum here but the command buttons seem to have many different behaviors. On the attachment, "Button 1" and "Button 2" are the ones I created in Excel 2003. "Button A" and "Button B" are from an example I found on the forum.
1 and 2 can only be edited on design mode, and have the formula "=EMBED("Forms.OptionButton.1","")" by default (which yields an error when exiting the formula field). A and B can be edited at any time, and have an extra tab ("Control") on the Control Format dialog. This seems to allow the linked cell to be set and function pretty handily. Are A and B from a different version of Excel? Auto Merged Post;Here's the attachment:
I have 3 cpmmandbuttons in a spreadhseet named "Controls" . viz
Trim and Edit Base DataCreateReportArchive
They are always run in the same order.
My Aim is to disable and gray out the Archive button once its assigned macro is run(by clicking it) so that it activates only next time that the workbook is opened.
In the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
View 9 Replies View RelatedI need to get the code for a "copy" command button and "select all" command button. I need both for a text box.
Scenario: I click on the "select all" command button, it selects whatever is in the text box and then the "copy" command button copies all of that. So then I would be able to paste that in another program.
Does anyway to use a scroll bar to priortize a selected range?
I have included a simple example that I would like to rearrange with a scroll bar.
For example, I would want be able to select one row in the range and then place it either above the current position or any where in that range.
I have I command buttons on the sheet and when I delete a row, the postiion of the buttons is changing. Can I make it somehow so they never move when I add or delete rows?
View 2 Replies View RelatedI've fought with this issue off and on for some time now and decided it was time to come to you for help. In the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
View 8 Replies View RelatedHOW TO SET FLOATING COMMAND BUTTONS in sheet which fixed at top or bottom of the screen not fixed at cells
means while scrolling a screen it should look like fix at bottom of the screen
I have multiple Command Buttons on a spreadsheet that all require the same password when used. The password s contained in the code. Is there a way to have the password in hidden cell so if the password needs to be changed it can be change onetime and it will change all passwords. Below is the code I am using for the password.
Const strPass As String = "123456"
Dim strPassCheck As String
Dim lPassAttempts As Long, lCount As Long
Do Until lPassAttempts = 3
lPassAttempts = 1 + lPassAttempts
[Code]....
Is it possible to format the colour of a command button based on the value of a cell?
View 9 Replies View RelatedWhy code will not hide command buttons or worksheets based on a given password. I have attached the code so.
Private Sub Workbook_Open()
Dim strUser As String, strPassword As String
strUser = InputBox("Enter User Name")
strPassword = InputBox("Enter Password")
Select Case strUser
Case "O"
If strUserPassord = "O4" Then
ActiveWorkbook.Sheets("Main").Select
O.Enabled = True
GOODBYE.Enabled = True
S.Enabled = False
R.Enabled = False
A1.Enabled = False
A3.Enabled = False
A4.Enabled = False
Sheets("Set4").Visible = True
Sheets("Set5").Visible = False
Sheets("Set61").Visible = False
Sheets("Set63").Visible = False................
I have a workbook which employs 4 different userforms. Navigating thru the workbook, the user ends up at a sheet with 5 macro buttons, allowing them to choose from several different functions. I added these to the worksheet using the "forms" toolbar.
My question is this: Is there anyway to change the color of these buttons, as I can with the userform buttons? Under "format control" I can change size, font, even color of font, but I can't change the background color of the button itself. Is it possible to identify those particular buttons thru VBA and adjust it's format?
I have created a custom Command Bar called "My New Bar"
How can I step through each button in that bar to read the assigned macro names or the Caption names
I managed to save workbook as values only by the help of this forum
Now is it possible to disable the commond buttons, when the workbook is saved as values only or can we delete the macro's.
