I am trying to provide a search string and then loop round searching for this search string until the beginning find cell is found again however I am having problems making my code work - here it is:
View 2 RepliesCode to create buttons on a userform. I have adapted his code to do what I want. The code he gave me was:
[Code]....
In the Class Modules:
[Code] ........
All buttons when created are coloured yellow. When a button is clicked, it turns blue (to indicate that the button was clicked. However, my problem is that when another button is clicked, it also turns blue as coded. This means that both are showing blue colour. I want all other buttons to turn yellow and only the button clicked should turn blue.
I'm trying to write a code to make a number of buttons visible depending on a cell value
I have 10 command buttons all are invisible and I want to show only the first x x is the value of cell "A1" in "Sheet1" (will be from 1 to 10) Command buttons names are default names (CommandButton1, CommandButton2, ... , CommandButton10)
Note: I'm working with a worksheet not a userform
I'd heard that using FIND might make macros run faster than looping. Below is the code I'm currently using. There are two worksheets. The first has a column containing numbers and a blank column to insert the associated code. Sheet two has a list of unique numbers with the associated code. Presently I used a nested loop to populate the code column of the first sheet. As sheet 1 contains in the neighborhood of 25,000 rows it can take quite a long time to run using the loop
Option Explicit
Sub BWRawCoding()
Dim wb As Workbook
Dim wsPT As Worksheet, wsAgg As Worksheet
Dim RowsPT As Integer, RowsAgg As Integer
Dim LoopPT As Integer, LoopAgg As Integer
Set wb = ActiveWorkbook
Set wsPT = wb.Worksheets("Graphical Data -RAW")
Set wsAgg = wb.Worksheets("agg")
RowsPT = wsPT.UsedRange.Rows.Count
RowsAgg = wsAgg.UsedRange.Rows.Count
For LoopPT = 2 To RowsPT
For LoopAgg = 2 To RowsAgg
If wsPT.Cells(LoopPT, 6).Value = wsAgg.Cells(LoopAgg, 2).Value Then
wsPT.Cells(LoopPT, 24).Value = wsAgg.Cells(LoopAgg, 1).Value
End If
Next LoopAgg
Next LoopPT
End Sub
I have a set of data and I need to find the max for range 1-10, then 2-11, then 3-12 and so on. Is there away to do this using a loop. I'm new to vba and I've been trying but either it doesn't work or I get an error message.
View 8 Replies View RelatedThe following macro searches Sheet1 for a value in a user defined textbox. When it finds the value it copies the row and and pastes the row in another sheet and then loops. My problem is i need to add a "do until" so that i will stop. I just don't know what code to add after the "until" to have it search the sheet once and then stop. Right now it will repeat infinitly. I need to know how to get it to stop once it looks through all the cells once. My current code is:
Private Sub CommandButton1_Click()
Do
Sheets("sheet1").Activate
Application.CutCopyMode = False
Cells.Find(What:=TextBox1, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Select
ActiveCell.EntireRow.Copy....................
As a part of a much larger routine, I need a code to find five consequetive cells in a column with identical value "XYZ" and select the first one of them. Say,
I have a column:
apples,
pears,
apples,
oranges,
xyz,
oranges,
xyz,
xyz,
xyz,
apples,
apples,
apples,
xyz,
xyz,
xyz,
xyz,
xyz,
xyz,
xyz,
etc.
I need to select the twelfth cell in this column, highlighted red.
I guess there could be some complicated if-then loop to go through the whole column, checking each cell and comparing it to the next four, but it would take forever to excecute... Is there some other way around? To find the first occurence of five xyz's one directly under another?
I've written a macro which searches the sheet for a value, when it finds the value it does something, then I want it to keep looping until it's done.
The issue is that Excel's find does not search first to last. Once it gets to the last, and you search next, it goes back to the beginning and finds the first cell.
In order to break out of the loop, I figured I should store the first cell found in a variable and then check inside my loop to see if I have got looped back to the beginning. If I got back to the first cell found, then I exit my loop and I'm done.
However, my code doesn't work. It exits the loop after a couple of iterations.
Sub Macro5()
'
' Macro2 Macro
'
If WorksheetFunction.CountIf(Cells, "TEST") = 0 Then
MsgBox ("Not Found")
Exit Sub
End If
Cells.Find(What:="TEST", After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False) _
.Activate...............
to perform find, if match, ubdate, looping action in various sheets of excel through VB.
Currently, i am working at WAREHOUSE, where not having SAP OR ERP to perform [ maintain ] each & every in & out movement of products. However, i have been using excel to put in values for in & out manually....
What I'd like to know now is if there is a way to loop through a set of controls...I'll call that set 'A' and if the value "No Option" is found in one of A's controls, then a corresponding control in set 'B' is formatted as disabled and with a value of 'X'.
Ex. Control A1 = "Cat"
Control B1 is enabled with no value
Control A2 = "Dog"
Control B2 is enabled with no value
Control A3 = "No Option"
Control B3 is disabled with a value of 'X'
Control A4 = "No Option"
Control B4 is disabled with a value of 'X'
The code below shows where the wheels came off:
Option Explicit
Const lGrey As Long = &H80000005
Const lGreen As Long = &HFF00&
Dim BM1 As String
Dim TextBox As Control
Dim TextBox1 As Control
Private Sub UserForm_Activate()
LoadOptionCriteriaData
LoadFormat
End Sub
Where i want to carry out a find and replace specific to different worksheets.
At the moment i have:
Sub Changeme ()
Dim SH As Worksheet
Dim rng As Range
Dim rCell As Range
Set rng = ActiveWorkbook.Sheets("sheet3").Range("A8:C10")
[Code] ........
Where column A contains the tab name, column B contains what to replace and column C contains the replacement.
I have modified some code I found in these forums that once I enter a value in a cell I can have it find the closest match to that value and scroll down the list and paste that value as an offset. The code works perfectly, but my data will often contain the same values repeated and these aren't duplicates and I need to know how to loop the code to ensure it doesn't just find the first value but also the second (if the first is already populated) Code is:
Sub findclose()
Dim rng As Range, Dn As Range, Mx As Single, oAd As String
Dim num As Range
Set num = ActiveSheet.Range("B1")
[Code] .......
---- What I need to do is insert a loop of some sort that basically says IF my offset cell has a value then to find the next closest amount and continue the macro.
So if my list was:
700
50
500
600
500
And I wanted to find 499 then my list would look like:
700
50
500 499
600
500
BUT if I wanted to match off another amount of 501 it would keep the 499 it found and then find the 501 making the completed list look like:
700
50
500 499
600
500 501
Right now the amounts are being overidden as I don't know how to loop it...
My spreadsheet's column Z is a delivery date. When the workbook is started up (preferrably once per day, rather than each and every time you start it in a day), I would like to be able to loop through column Z, and if the date is today, toss the same row's columns A, D, and J on to `Summary`!A2:A?? (however many rows it needs), concatenated. I know I can do it easily with a for loop, but as I've learned, for loops tend to be really slow. Is there a quick or better way to do this than with a for loop?
View 9 Replies View RelatedI need to find the row number of the first instance of the string 'TIMEACT
in column A. I know that it must exist at some point in column A, but I do not know where. Column A might have 100,000 entries... ie: a very large number, so I'd appreciate it if the code could be very general.
I have recorded a macro in Excel that copies the contents of a cell in one worksheet, then goes to another, selects a column, runs the Find command and then pastes the clipboard contents into the "Find what" field.
Naturally when I read the code back in visual basic the macro is now programmed to always search for the data I copied from the original cell. The problem is the data in that cell changes all the time so I need it to always copy whats in there and paste it into the Find what field.
I have one sheet in my workbook called 'mapping' which has a list of codes on it, the length of which will vary on a periodic basis.
I have another fairly large sheet on the workbook called 'data' (around 2000 rows) that will also vary in size. I want to do a search on the data tab for each code that is contained on column 4 of the mapping tab and if the code is found, enters the corresponding value from column 1 of the mapping tab to the cell 6 columns to the left of where the code was found on the data tab (cols H and B in this case). Hopefully that makes sense!
The issue I have is the codes maybe contained more than once on the data tab so I need the find/replace command to search the whole of the data tab and perform the task each time.
I have the following lines in my macro:
Dim LastMonth As Variant
LastMonth = Year(Now()) & "0" & Month(Now() - 1)
Cells. Find(What:=LastMonth).Activate
I am trying to find the first instance of 2007+previous month, i.e. April =04, in a data set. Not sure how to tweak this formula to make it work.
I m trying to set a range on a cell after using the FIND function in a macro and was wondering if anyone had any experience in it.
Basically, I have a spreadsheet which I am looking up a value that i stored in FID1 with the extension "_EXE"
I'm using the FIND command to find that cell and then set a range so that I can mark it but am getting an error....
I can't find the Edit Links command in Excel. where it is?
View 1 Replies View RelatedI have a spreadsheet that I'm using as a call log for a support desk. Sometimes, when the problem is outside of my scope, I have to call in a ticket to a helpdesk.
I want to keep the call log separate from the ticket list, but I want to be able to reference a ticket number for a specific call or vice versa using a command button.
I want to use one button with a macro attached to it to locate data on a different worksheet. So I highlight the "activecell" I want to find on the other spreadsheet then click on the button and it goes to the correct spreadsheet and filters for the data I want (relevant to the activecell).
View 6 Replies View RelatedIs it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies View RelatedI am playing around with the Forfiles command (being called from Excel via Shell)..
I can't for the life of me get it apply a second command (such as getting the file size of each file)..
For example:
VB:
Private Sub CommandButton1_Click()
Dim Z
Z = Split(CreateObject("wscript.shell").exec("cmd /c forfiles /P C:UsersapoDesktopTextFiles /S /M *.* /d
[Code]....
The end result being the filename and the filesize shown..
Excel 2007
I have this simple formula: =IF(SEARCH("ABC",BQ239,1)>0,"Found", "Not Found")
Instead of saying Not Found when the value is not in the cell BQ239 text string I get #VALUE! returned
how do I get it to say "Not Found"? I searching for a substring that can be anywhere in the string.
Is there any way to tell (from VBA) what GUI command is currently in progress or what the last command used was?
On a wish list perhaps: Application.LastCommand and/or Application.CurrentCommand
Let's say I'm in the "Sheet_Change" event and want to know what caused the change. Was the event triggered by "Delete", "Paste", "Keystrokes" ...
AutoCAD VBA has "Begin_Command (CommandName as String)" and "End_Command (CommandName as String)" events which I find very useful. Basically I'd like to emulate that to the greatest extent possible.
Application.Caller does not seem to work for the stated purpose. I've been searching for a workaround by means of reading the "Undo Stack". Numerous articles written by experts state that the undo stack is not accessible from VBA.
I've considered reading the text from the "Undo" button's caption but it just seems like such a hack ... not that this whole idea isn't a hack
I know how to loop for 1 to 10.
But is it possible to loop for 01 to 10?
Like:
[Code] ......
Because I am pulling data from external aplication, so the 0 is fix in a row/column.. I will need to get the row/column for the whole "01" and not only "1".
I am not sure what I am doing wrong with this expression. I know the code is a little messy, sorry.
View 2 Replies View RelatedIs it possible to write a cell formula (not a macro) to loop through a range of cells and test for a value? Something tells me that I need to use the "Offset" function.
How do I continue to loop through the last row and get the values to 3 differrent text boxes?
If I remember right, I think the command is Offset, 1 to go to the right one cell correct?
Sub CommandButton1_Click()
'("PowerAnalysis").cells(Row, 3).Value = textbox1.Value
'Worksheets("PowerData").Cells(Row, 3).Value = TextBox1.Value
Set WkSht = Worksheets("PowerData")
LastRow = WkSht.Range("A" & Rows.Count).End(xlUp).Row
WkSht.Cells(Row, 1).Value = TextBox1.Value
'LastRow = r
'r = ActiveCell
'Dim r As Long
'r = ActiveCell.Row
'UserForm3.Show
'WkSht.Cells(Row, 3).Value = TextBox1.Value
UserForm3.TextBox1.Value = r
End Sub
This code is wrong, but how can I get the first three records on the last row to display in three textboxes on UserForm3 titled TextBox1, TextBox2 and TextBox3.
Norie may be right, I may not have to even think about using repaint.
I have created a spreadsheet used for timber design. The spreadsheet calculates whether a specified size of timber column will support a specified load under certain conditions.
The various conditions include, load duration, service class, strength class and limit states.
Ok at the moment the user specifies the load and length of the column, then chooses a size of timber and sets the conditions mentioned above. Once this has been done the calculations i have put together on another sheet, work out whether the size of timber can support the specified load.
It is important to know that the answer for the final strength formula of determining the strength of the column should be equal to or less than 1. If this is the case then the column is ok, if the answer is larger than 1 then the column isnt safe.
Also at various points within the calculation certain checks are required to make sure certain design values satisfy certain criteria. If they dont then a new size of timber sould be tried.
What i would like to be able to do is use a loop so that the spreadsheet will use differing sizes of timber and calculate the values that satisfy the criteria and eventually find the size of timber required. The final answer of the strength calculation should be as close to 1 as possible but not over.