Change Caption Of Dynamically Created Label
Jun 26, 2007
For a form that dynamically creates a series of text boxes and labels, does anyone know how to change the caption of a dynamically created label to display the value of a cell in a worksheet? The cell in the worksheet changes according to input on the text boxes. In the form's code, I have:
Dim newLblFreq As MSForms.Label
Set newLblFreq = Me.Controls.Add("Forms.Label.1", "lblfreq" & i, True)
newLblFreq.Caption = Range("V" & i).Text & " Hz"
But once the label is created, the caption won't change, even if Range("V" & i) changes...............
View 6 Replies
ADVERTISEMENT
Apr 27, 2014
The following code dynamically creates a number of textboxes within a frame with a label right next to it. There are two classes.
[Code] ......
The two classes look like this:
[Code] .....
This works just fine to create the dynamic series of textboxes and corrosponding labels. I am having trouble with the reference between them. for example (within the class module):
[Code] .....
As shown, the reference to the corresponding lable from within the class doesn't work. How to reference the correct corresponding label.
View 13 Replies
View Related
Aug 5, 2014
I'm trying to change the caption of a label (OLEobject) and it is not working so far :
[Code].....
View 2 Replies
View Related
Sep 30, 2009
I have just noticed that there is no defult event for the running code after updating a label caption. I would like to have like a textbox does (Change,AfterUpdate). to run code on the label caption change. could it be done with activex?? can it be done at all.??
View 2 Replies
View Related
Jun 20, 2008
I present a form (a calendar) twice in my routine to the user but I want to change the Caption of the Label on each pass?
e.g.
The first time it's displayed: 'Please select a start date' (calendar closes & goes off and does stuff)
... and on the 2nd display: 'Please select an end date'.
View 7 Replies
View Related
Mar 2, 2014
I needed to put a Checkbox on a Worksheet. The standard Checkbox options in Excel FormControl and ActiveX Control were too small. I found a work-around using the following macro attached to an ActiveX Label that was formatted as Wingdings font. The macro basically changes the character from a empty box Wingdings Chr(168) to a checked box Wingdings Chr(254) when the user clicks on the label.
Private Sub Label1_Click()
If Label1.Caption = Chr(254) Then
Label1.Caption = Chr(168)
[Code]....
But I get this error on an ErrorHandler that I have included in the macro. "An error has occurred. Error number =438. Error Description=Object doesn't support this property or method."
View 3 Replies
View Related
Feb 1, 2008
I'm amtepting to populate some labels from some predefined strings based on the scrollbar value. I have these codes:
Option Explicit
Public Meddelande1 As String, Meddelande2 As String, Meddelande3 As String, Meddelande4 As String, Meddelande5 As String, Meddelande6 As String, Meddelande7 As String, Meddelande8 As String, Meddelande9 As String
Private Sub UserForm_Initialize()
On Error Resume Next
Workbooks("Kontrollsystemet.xls").Close SaveChanges:=False
Application. ScreenUpdating = False
Workbooks.Open "V:allaBeredningKontrollsystemetKontrollsystemet.xls", ReadOnly:=True
Sheets("Meddelanden").Activate
Meddelande1 = Range("B2").Text
Meddelande2 = Range("B3").Text....................
View 2 Replies
View Related
Jun 11, 2008
I'm buildng a userform for data input.
As an aid, I have a label at the bottom of the form and when a person tabs onto a textbox that labels then states what you are supposed to input into that textbox along with an example. When you tab onto another textbox the caption on the label changes to give another explanation and example.
I attempted to insert an if statement into the userform which states that if a textbox is enabled then the caption of the label = "Example"
If textbox1.enabled = True Then label1.caption = "Explanation 1, Example 1"
If textbox2.enabled = True Then label1.caption = "Explanation 2, Example 2"
End If
End If
View 5 Replies
View Related
May 13, 2014
I created a userform where if a value from cell x is true then the label caption changes to value in cell z. While everything works fine, the label caption does not seem to appear in my userform until i click on the label. Is there anyway that it can appear automatically once the userform opens?
Also example of my code is:
Private Sub EventDateResult_Click ()
If Range("A5") = "1" Then
Me.EventDateResult.Caption = Range("N4")
End If
End Sub
View 3 Replies
View Related
Jun 17, 2014
I am using a userfrom in my sheet. i want to link label2 = sheets("OF $").Range("D6").value
I mean I want to lable2 = cell value as link
View 3 Replies
View Related
Jun 10, 2009
I have 3 labels in my userform that I want to display the text in AN50,AN52 and AN54 in all the time. How can I write this code?
View 9 Replies
View Related
Mar 31, 2014
Is it possible to load an image into a label and have the caption for the label be visible too? I've only been successful having one or the other display but not both.
View 2 Replies
View Related
Apr 17, 2009
its possible to convert a blank string on a label into an integer? My form loads and populates a label.caption with the value of the activecell.value. Sometimes the activecell.value is empty and sometimes has a number in it. I need to do a calculation (label.caption * 2) but if the label.caption is empty it throws an error. I need it to treat an empty label as zero.
View 2 Replies
View Related
Jun 4, 2012
Is it possible to have a caption on a label with mixed font size. I tried this but the 2nd call just overwrote the first.
Code:
Private Sub UserForm_Initialize()
Call EM
Call aint
End Sub
Public Sub EM()
[Code] ......
View 4 Replies
View Related
Jul 24, 2012
I have a listbox that is currently populated via the following code, designed to give a unique list with no repeats.
Code:
Sub UserForm_Initialize()Dim UniqueList() As String
Dim X As Long, y As Long
Dim r As Range, rAll As Range[code].....
This code works fine. NOW, what I need to do, is set individual labels, based on the values in the listbox, BUT, here is the kicker - I don't want to select any of the listbox values. I know there will be seven rows in the listbox that correspond with seven labels.
What I nede to do, is set the first label.caption as the first row in the listbox. The second label as the second row, etc. The listbox only has one column, and I have tried the following code, but it doesnt work.
Code:
With UserForm2 .Label1.Caption = .lbxParalegal.List(0, 1)
End With
View 2 Replies
View Related
Feb 26, 2013
I have two text boxes on a userform that are used to populate a label caption based on the textbox values. How do I set the label caption to update once a a textbox value is changed?
View 2 Replies
View Related
Aug 18, 2007
I'd like to: Display the contents of a group of cells in a userform's label's caption. The columns containing the cell's which contents would be displayed are fixed (do not change). The rows will change. I need to reference the Ar, Br and Cr columns (where r is for row) of whichever column I am working on at a given moment.
View 4 Replies
View Related
Apr 20, 2008
I want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
As i want this for display purpose only can i use the label caption for the above question?
View 3 Replies
View Related
Jul 16, 2014
How to copy a label caption (from userform) then paste it in a worksheet.
View 2 Replies
View Related
Aug 9, 2009
I have multiple Userforms with labels etc, all controls are similarily named (so I could do this) and I can refer to the Userform dynamically but the Label caption/Controls don't change, any idea's how to get them working.
View 7 Replies
View Related
Nov 23, 2007
I have a label control whose caption is set from text from a work sheet
How can I set the text of the caption to bold
View 9 Replies
View Related
Feb 29, 2008
i've got a form that shows employee data in labels, and i'd like the user to be able to double click a label to change it (using a pop-up form). is it possible to get the pop-up to show after a double click instead of a single click?
View 5 Replies
View Related
Aug 9, 2014
I have a userform in excel....the listbox "listbox1" has over 1000 items....and i have a label "label5" also.
What i want is if I select for example 10 items from the listbox1 to be shown in the label5 directly....and of course if i select or deselect any item will be applied in the label
For example...selected items from listbox are;
5
6
7
8
9
the label will show me the same
5
6
7
8
9
Code while noting that the list box has many columns...so i want to select which column to be appeared in label.
View 2 Replies
View Related
Jun 8, 2014
I am having a excel vba code that copies tab from different excel file and then i want to use in sql query. It is always giving me error saying that "The Microsoft Access database engine could not find the object 'rahul'. Make sure the object exists and that you spell its name and the path name correctly. If 'rahul' is not a local object, check your network connection or contact the server administrator."
Though, when i rerun the macro after reopening the excel file, it is working fine. Seems like tabs dynamically created cant be used. Is their any way to get it done at runtime? I want to delete new created tab once data from new tab is inserted to required tab.
my macro calls first copyAllSheets(filename) and then writeSheet().
Code:
Private Function copyAllSheets(ByVal fname)
Dim destSheetCount As Integer
Const FUNCNAME = "copyAllSheets"
On Error GoTo ErrorHandler
Set wb = Workbooks.Open(fname)
destSheetCount = ThisWorkbook.Worksheets.Count + 1
wb.Worksheets("Buyer").Copy after:=ThisWorkbook.Sheets(1)
ThisWorkbook.Worksheets(destSheetCount).Name = "impBuyer"
[code]........
This is part of code so probably it wont be easy to understand the flow. but mainly i want to know how can i have newly created tab as table_name.
View 7 Replies
View Related
Apr 27, 2014
Code to create buttons on a userform. I have adapted his code to do what I want. The code he gave me was:
[Code]....
In the Class Modules:
[Code] ........
All buttons when created are coloured yellow. When a button is clicked, it turns blue (to indicate that the button was clicked. However, my problem is that when another button is clicked, it also turns blue as coded. This means that both are showing blue colour. I want all other buttons to turn yellow and only the button clicked should turn blue.
View 5 Replies
View Related
Jun 3, 2014
Basically, I am taking user input to determine how many textboxes to create during runtime, and want to call the contents of those textboxes after the user has put something in them.
View 1 Replies
View Related
Apr 1, 2008
I have 100s of name ranges in my spreadsheet. I am using a series of drop down boxes for the user to select the info that they want to see. Based on the dropdown box, the macro "dynamically generates" a range name from which to pull the info.
For instance, if they Select Manager = Terry, Analyst 1, and Month = Jan, then the range name would be JanTA1
The if statement would dynamically create this name by concatenating the info
If manager = Terry
mnger = "TA"
if analyst = 1
anlyst = 1
if month = Jan
mnth = "Jan"
rangename = mnth & mnger & anlyst
So, I am dynamically creating the range name based on user selections...then to display it, I want to set the display cell = to the value
Range("display cell").Value = Range(rangename).Value
The problem is, I am getting an object error every time I try to refer to a range this way.
If I type:
Range("display cell").Value = Range("JanTA1").Value, it works
View 9 Replies
View Related
Oct 10, 2006
I have somecode that scan column "A", and add dynamically "TextBox" Control according to some condition.
How to add event on dynamically created controls?
Private Sub btnSubmit_Click()
Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
For Each rng In Selection
View 9 Replies
View Related
Mar 4, 2009
I have a userform with a single blank multipage. At runtime additional pages are added, the number of pages depends on input from another userform. Six frames, containing labels, textboxes and comboboxes are then added to each page.
I need to be able to use the textbox and combobox change events of these dynamically created controls to perform lookups and calculations. Although I can name the controls at the time they are created, it is not feasible to write code specifically for each control (I can have over 1,600 text boxes distributed over 9 pages, for example).
Having searched for some time on how to achieve this I believe using a class module is the way to go. However, how to use a class module is just not sinking in I'm afraid.
HTML Private WithEvents mpTextBox As MSForms.TextBox
Private WithEvents mpComboBox As MSForms.ComboBox
Private Sub Class_Initialize()
Set mpTextBox = MSForms.TextBox
Set mpComboBox = MSForms.ComboBox
End Sub
Private Sub mpComboBox_Change()
MsgBox "ComboBox value has been changed."
End Sub...........................................
View 2 Replies
View Related
Apr 2, 2013
I have a userform that has one combobox at the top created manually. When the userform is opened, the user select an option in the combobox (these options are taken from a range on 1 worksheet). From the selection of the combobox, I use the comboxbox's change event to create and display 5 columns of textboxes and 2 columns of command buttons on the userform.
The number of rows of textboxes created depend on the option selected from the combobox since each option links to a different range of cells. Each of the 5 textboxes in each are set to be ".enabled = False" and display text as per the cell values within a range on another worksheet. 2 Columns of command buttons are created at the end of each row of textboxes - 1 is enabled and the other is not.
The creation of the textboxes and command buttons works as required. However, I am having problems with setting click events for each command buttons. When the 1st column of Command buttons are created, I need the click events to be created and filled out with 2 actions:
1. Enable all textboxes in the same row as the command button
2. Enable the other command button in the same row.
Here is the code I have so far that creates the textboxes and command buttons.
Each of the 5 textboxes and 2 command buttons have a unique name so the 1st row will have textbox and command button names of cTxtA1, cTxtB1, cTxtC1, cTxtD1, cTxtE1, CmdAmend1 and CmdConfirm1. The 2nd row will have the same names but with 2 on the end and so on. The bold sections is the code for the creation of the command buttons that I want click events for.
Code:
Private Sub CboTeamSelect_Change()
Application.ScreenUpdating = False
If CboGroupSelect.Value = "" Then Exit Sub
Dim cTxtA As Control, cTxtB As Control, cTxtC As Control, cTxtD As Control, cTxtE As Control
Dim CmdAmend As Control, CmdConfirm As Control
Dim iNum As Integer
Dim TxtTop As Long
[code]....
View 2 Replies
View Related
