How do I change the code so that the macro looks up the next sheet (instead of by sheet number, which is how the code was recorded) and transfers data to the summary page until there are no more new sheets. See attached zip.
View 6 RepliesI used VBA to write a number of formulas into various cells in a workbook. After the VBA is done running, I change the values in the cells that are referenced by the cells I wrote formulas in. The formulas do not update after I enter this new information. My calculation is set to automatic, and F9 doesn't help.
View 3 Replies View RelatedI am trying to have the formula =( SUMIF(S2:S125,">0",S2:S125))/(COUNTIF(S2:S125,">0")) Put into cells through vba. What I did to get the formula is typed it into an excel cell to find the average of a group of cells that do contain blank cells. The formula brought out the proper results. So all I did is put the formula into vba and changed the appropriate parts. The range will not be the same of course, but there is what I have.
ActiveCell.Formula = "=(SUMIF(" & ActiveCell.Offset(orow + 2, 0).Address & ":" & ActiveCell.Offset(-1, 0).Address & ","">0""" & "," & ActiveCell.Offset(orow + 2, 0).Address & ":" & ActiveCell.Offset(-1, 0).Address & "))/(COUNTIF(" & ActiveCell.Offset(orow + 2, 0).Address & ":" & ActiveCell.Offset(-1, 0).Address & ","">0""" & "))"
When I show a msgbox for ActiveCell.Formula (Msgbox activecell.formula), it shows me the formula as above - =(SUMIF(S2:S125,">0",S2:S125))/(COUNTIF(S2:S125,">0")) Except instead of the s:ranges, it shows $L2:$L125 (which is correct). The quotes do show up around the criteria in both the sumif and countif. I keep receiving an error. I put a msgbox err.description & ", " err.number dialog in. The error comes up as ", 0" (no quotes).
I'm trying to enter a series of formulas referencing the first cell of each row.
With Range("A40")
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 1).FormulaR1C1 = "= COUNTIF(Details!R2C2:R65536C2,RC1)"
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 2).FormulaArray = "=RC[-1]-SUM((Details!R2C2:R65536C2=RC[-2])*('Details'!R2C11:R65536C11=RC1))"
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 4).FormulaArray = "=SUM((Details!R2C2:R65536C2=RC1)*(Details!R2C4:R65536C4>TODAY()-7))"
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 5).FormulaArray = "=RC[-1]-SUM((Details!R2C2:R65536C2=RC1)*(Details!R2C11:R65536C11=RC1)*(Details!R2C4:R65536C4>TODAY()-7))"
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 7).FormulaArray = "=SUM((Details!R2C2:R65536C2=RC1)*(Details!R2C4:R65536C4>TODAY()-30))"
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 8).FormulaArray = "=RC[-1]-SUM((Details!R2C2:R65536C2=RC1)*(Details!R2C11:R65536C11=RC1)*(Details!R2C4:R65536C4>TODAY()-30))"
End With
While this code works for the first formula, the following 4 are arrays, and for some reason, will only reference the first A40 cell.
I've got 3 sheets, A, B, and C. In sheet C, I have a cell named "element". That cell can have either the letter A or the letter B in it. In my VB code, I want to reference the sheet which correlates with the "element" cell. So,
Worksheets("element").Select
when the user clicks my "go" button, it calls this logic, and I want the worksheet that correleates to the letter in the cell in worksheet C - to open.
The reason for my posting - this is not working, and may not even be possible. Perhaps someone has experience in this and knows how to do it - or knows a different way to do this.
how to use VBA to write a formula in one sheet that refers to a fixed cell on the sheet to the right. The referenced sheet may have different names and it may be in a different order (i.e. not Sheet(2)) but it will always be one sheet to the right. I just want to have cell A1=(cell B2 one sheet to the right).
View 7 Replies View RelatedI've found a few macros that will automate changing cell references from absolute to relative and they work great. However, when I run the macros on formulas that have references to another worksheet or workbook, the macro will not work correctly.
View 9 Replies View RelatedThis seems really basic, but I can't seem to find it...
Using Visual Basic, if I have a named range, lets say like "NAMEDRANGE", how can I refer to cells in that range by their position in the range? For example, if I want to refer to the cell in the 2nd row and 3rd column of the range.
Also is their an easy way to refer to the first(top-left) cell in a named range?
Following syntax is incorrect, what is wrong? This should happen: Select op a specific worksheet (named DATA) in the workbook Report.xls and I empty the contents
Then I try with a 'With' statement to read the contents of a file named "sourcedata.xls' with helds a worksheet named "source". The values in this sheet should be tranfered to the sheet DATA in the workbook "Report.xls"
Sub FetchDataFromClosedWorkbook()
Dim FileName As String
Dim SheetName As String
Dim cellRange As String
Const ReportPath = "C:ExcelReports"
Windows("Report.xls").Activate
Sheets("DATA").Select
Cells.Select....................
I have a UDF in Cell Sheet1!A1 that inputs some ranges from Sheet1 and calculates a number. Then I have a sub that calculates the value of this function with Evaluate(Sheet1!A1.formula). However, this only works when I am in Sheet1. Otherwise, I get the wrong calculation. How can I avoid this? I will post the code in the open source forum as it otherwise is quite good and automatically resizes array functions to their proper size.
View 2 Replies View RelatedI have a formula that I want to insert using a macro, so how do I iterate the * values in this line?
ActiveCell.FormulaR1C1 = "='Sheet1'!R[*]C[*]"
I am trying to use VB to vlookup between to workbooks
1. Make active workbook WBK1
2. Make workbook being open WBK2
3. Copy and Paste between WBK1 and WBK2
4. Have a vlookup in WBK1 and bring in the values from WBK2
5. Close WKB2
6. Copy, Paste, and transpose values in wkb1 within wkb1
The script works fine until it reaches the vlookup step. I have used the vlookup by itself without the copy and paste code successfully but when I combine the two it provides me with the error 9. Subscript out of range.
I am trying to run the following code on multile sheets in a workbook. so far this code is working fine for one worksheet. Can someone help me modify this so it runs on multiple sheets. There can be more then 1 worksheet in a workbook depending upon data ...
View 9 Replies View Relatedi have a macro code but i don't know how to apply it to all sheets in the same workbook
my code is
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Range("D5:D100"), Target) Is Nothing Then
Target.Offset(0, 1).Value = Now() [code]....
I havae the following macro which i recorded in Excel. I want this Macro to run after another macro that groups data and creats tabs. The following macro will then add a column and run an array formula. I think this can be done in a loop but i'm not sure how to do it. This is working but takes a long time and times out by the time it reaches the last tab.
Application.Run "TotalHrs"
Columns("I:I").Select
Application.CutCopyMode = False
Selection.Insert Shift:=xlToRight
Range("I4").Select
ActiveCell.FormulaR1C1 = "Invoiced Amount"
Range("I5").Select
Columns("I:I").EntireColumn.AutoFit
Selection.FormulaArray = _
"=INDEX(VLookup!R2C2:R242C4,MATCH(RC[-3]&RC[-2],R5C6:R2500C6&R5C7:R2500C7,0),3)*R[3]C[-1]"
Selection.Copy
Range("I6:I1000").Select...................
I have got the following code to fill series and someone please help me that how to use this macro I can enter thses code in sheet1 on enter event and the result iwill be displayed in sheet2 and if any duplication in series then it is copied in sheet3....
View 9 Replies View RelatedI want to have a summary tab calculate figures of other tabs. For example in "Summary" tab, I want to Sum (a:a) for tab "January" =January!sum(a:a)
Does not work. I have also tried other options as well. Is it possible to use formulas when referencing other tabs.
I'm writing a custom function, and in the function i want a reference to the cell that the function is entered in, how do i do that?
View 7 Replies View RelatedI have 2 cells which I will select on a work book; (say A1 and A2). A1 is the input cell and the formula and the result generated is in A2.
Suppose I input 3 in A1 and A2 shows 60, what I also want to do is input 60 in A2, which should show me 3 in A1, without destroying the formulas.
In short both cells will have formula and both cells will be input cells for each other.
I would like to drag down the formula from the last cell in Column A in reference to the last row in column B.
E.g My last data in Column A104 (code to select the last cell and this can vary from time to time the report is updated)
Column B has data till B142. I want to drag A104(contains formulas) down to A142.
Here is what I have but Selection Autofill doesn't work.
Range("A2").End(xlToRight).Select
Range("A2").End(xlDown).Select
Selection.AutoFill Destination:=Range("A3:A" & Cells(Rows.Count, "B").End(xlUp).Row), Type:=xlFillDefault
In the attached example, I need to create a formula for cell I2 (Balance Remaining) that is driven off the most recent calculation (in this case, F68) but still allows for additional rows to be added to the ongoing list of orders. I believe I'm supposed to use an index formula but not sure how to write/apply it? I need to be able to add rows past 68 and still have Cell I2 (Balance Remaining) continue to calculate correctly.
View 10 Replies View RelatedOn choosing Auditing Funtion, Trace Dependants, a small icon representing a spreadsheet ? appears at the end of a dashed line. What does this refer to?
View 3 Replies View RelatedFormula: B2+C2
In columnD I want to reference the "formula" and have it calculate based on the values in whatever row references the formula.
As it stands I can only get the formula to calculate within the same row.
I am working on a massive Pivot Table but in order to compile it I have to copy data from many worksheets into one. My problem is that each worksheet contains about 11,500 formulas with references to other workbooks and cells. However, none of these is locked for cell reference (meaning none has the $ sign for row or column) so copying and pasting obviously screws it up since the reference is changing but I need to have the links active in the pivot table.
It would obviously take me a year to add 440,000 individual $ signs. Is there any way, a trick of sorts, where I can just highlight the entire worksheet and add the $ sign to each and every cell reference automatically?
This may be an easy answer, but I haven't been able to figure it out. I have a cumulative page of formulas that reads "SHEET1!B8+SHEET!B9". I need the next row formula to reference "SHEET1!B47+SHEET1!B48", and then "SHEET1!B86+SHEET1!B87". Each row the formula moves 39 rows on sheet 1. Is there a way to get excel to automatically do this, so I don't have to go line by line?
View 9 Replies View RelatedI'm actually having difficulty with the sumproduct function, I'm trying to count items based on multiple criteria (and yes I have looked under that). I'm using a very helpful formula that I grabbed from this site. =SUMPRODUCT(1*(base!$B$1:$B$19465=locations!B$1),1*(base!$A$1:$A$19465=locations!$A6))
The problem that I have is that this doesn't work if I replace $B$1:$B$19465 with $B:$B. now as the number of rows on the base sheet may change, this means I need to change the formula each time I change the data on the base sheet which is somewhat ridiculous. I've been playing around with indirect trying to reference the last cell in a range, but I don't seem to be getting anywhere with that.
I want to be able to sort a table alphabetically by one column after adding a new row to the bottom. But there is another table that uses the values of the former table. How can this be done without screwing up the formulas in the second table.
View 5 Replies View RelatedThe spreadsheet works in Excel 2000 when you open it in any newer version it is corrupted. Which is fine so we are rewriting it in Excel 2010/2013.
We have data in columns A:E which comes from the refreshable query. Data in F:I are different formulas based on the data from the query. The number of rows we get will vary from query to query. The headers never change just the data. How can we make it so that when no matter the data length the formulas will always autofill up or down depending on the data length?
I'm preparing an accounting model for my office use. How to solve the copying of formula to all other cells.
The detail is here:
Sheet 1:
1) I've entered a number 1000 in L2
Sheet 2:
1) I've entered a values in columns D,E,F,G
2) Calculations :
at G2 : the formula is =D2*Sheet1!L2
The problem is when I Copy the formula in G2 through G3, G4, G5........... it changes to =D3*Sheet1!L3, =D4*ValidData!L4, =D5*ValidData!L5 and so on... but it should be =D3*Sheet1!L2, =D4*ValidData!L2, =D5*ValidData!L2, so that the L2 value shall be constant for calculations in all cells.
I have a 2 columns (A and B) next to each other that is using a Sum formula and other multiplying formulas. They reference 3 cells in a different column (C) to come up up with the answer for A and B. Therefore A1 and B1 reference C1 C2 and C3 (and possibly if want to use in future column D with D1 D2 D3).
Then in A2 and B2 I want to reference from C4, C5, C6
Then in A3 and A4 I want to reference from C7, C78, C9 etc.... and so on...
Instead of retyping formulas for each row in A and B, I want to copy down, but I getting the wrong answer when I do that.
I am therefore assuming I typing the formula wrong. How do I type it correctly so the cell reference changes automatically when I pull down columns A and B?
Formula for Column A: =SUM($G28:$G30)
Forumla for Column B: =($G28*$H28+$G29*$H29+$G30*$H30)/$B17
Therefore next row should be referenced from G31 to G33 and H31 to H33
But when I copy it only adjusts it for 1 reference down.