Reference Cell For Worksheet Name Macro Code
Apr 11, 2008
I've got 3 sheets, A, B, and C. In sheet C, I have a cell named "element". That cell can have either the letter A or the letter B in it. In my VB code, I want to reference the sheet which correlates with the "element" cell. So,
Worksheets("element").Select
when the user clicks my "go" button, it calls this logic, and I want the worksheet that correleates to the letter in the cell in worksheet C - to open.
The reason for my posting - this is not working, and may not even be possible. Perhaps someone has experience in this and knows how to do it - or knows a different way to do this.
View 4 Replies
ADVERTISEMENT
Jun 29, 2008
how to use VBA to write a formula in one sheet that refers to a fixed cell on the sheet to the right. The referenced sheet may have different names and it may be in a different order (i.e. not Sheet(2)) but it will always be one sheet to the right. I just want to have cell A1=(cell B2 one sheet to the right).
View 7 Replies
View Related
Jul 15, 2014
I need a VBA code to reference the cell value to activate a particular worksheet name. In the sheet "Ini", Range ("B4"), there is a text of "Rawdata" This text is used to reference to the specific Sheet name and activate it.
However, I am unable to get my code to work. Thus, I changed it with a ' with green highlights for the following lines:
'Worksheets.Open Filename:=DataRawSheet
'ActiveSheet.Range("A1").Select
Reference_Cell_to_Sheet.xlsm
View 4 Replies
View Related
Jun 10, 2008
I have a UDF in Cell Sheet1!A1 that inputs some ranges from Sheet1 and calculates a number. Then I have a sub that calculates the value of this function with Evaluate(Sheet1!A1.formula). However, this only works when I am in Sheet1. Otherwise, I get the wrong calculation. How can I avoid this? I will post the code in the open source forum as it otherwise is quite good and automatically resizes array functions to their proper size.
View 2 Replies
View Related
May 21, 2008
I am trying to use VB to vlookup between to workbooks
1. Make active workbook WBK1
2. Make workbook being open WBK2
3. Copy and Paste between WBK1 and WBK2
4. Have a vlookup in WBK1 and bring in the values from WBK2
5. Close WKB2
6. Copy, Paste, and transpose values in wkb1 within wkb1
The script works fine until it reaches the vlookup step. I have used the vlookup by itself without the copy and paste code successfully but when I combine the two it provides me with the error 9. Subscript out of range.
View 9 Replies
View Related
Sep 26, 2013
This is a continuation of thread 182629 [URL] ....
The End User wanted originally to type characters into cell C1 of a worksheet that the macro searched for in another worksheet, copying across every row containing the input.
The responses gave me the following code which worked perfectly:
VB:
With Sheets("PICKLIST")
myFind = "*" & .[c1].Value & "*"
End With
If myFind = "*" & "" & "*" Then Exit Sub
Unfortunately, the user NOW wants a Text Box instead of putting the characters into a cell.
I added a textbox (originally called 'TextBox2' but renamed "Choice") and "Dimed" CHOICE As Range.
Then tried the following code:
VB:
With Sheets("PICKLIST")
myFind = "*" & CHOICE & "*"
End With
But it generates a "RunTime Error 91" - Object variable or With block variable not set.
View 8 Replies
View Related
Jul 20, 2014
I have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:
Code:
=COUNTA(ABC!A:A)
What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say
AAB
ABC
CDE
And have a formula in column B that converts this to
=COUNTA(AAB!A:A)
=COUNTA(ABC!A:A)
=COUNTA(CDE!A:A)
I've learned that simply substituting the cell references A1, A2, A3 for AAB, ABC and CDE doesn't work. What do I need to do to achieve this?
View 2 Replies
View Related
Nov 3, 2009
I am writing a macro that will use information from the worksheet in use and the one prior to it. The problem is I do not know how to reference the worksheet that will always come before the worksheet in use. To fill you in, I have a monthly budget worksheet that tracks all my monthly financials. What I like to do is compare this months balances (cash, equity, bonds) and see the amount of loss/gain and percentage from the month before.
Here is what i currently have implemented.
This macro was written in the month of October. For this function the macro I wrote will take Octobers cash balance and subtract it from Septembers cash balance. This will give me the gain or loss. Now the problem is if I were to run this macro in November it will still reference September not October. I always want the macro to use the month before (the 1st tab to the left) not a specific tab. I wrote this macro using relative references so I do not understand why it will not use the tab before. Can someone please shed some light on this for me?
View 10 Replies
View Related
Aug 8, 2008
How do I change the code so that the macro looks up the next sheet (instead of by sheet number, which is how the code was recorded) and transfers data to the summary page until there are no more new sheets. See attached zip.
View 6 Replies
View Related
Oct 8, 2009
Maybe it's not as complicated as i'm thinking, but i'm trying to figure out a formula (or macro) that will let me basically fill in a blank from a (nearly) irrelivant second worksheet. The only similarity the two will have is a PO number, or in my picture diagram, it's a letter. The worksheet that i'm trying to fill in the blank from has maybe 1500 entries, the worksheet i am referencing to has roughly 11,000, so sorting it would make no difference and the columns would be very inconsistant with eachother, but the rows will be similar.
I want to start a formula in Sheet one, that looks at the Letter in that same row, finds that Letter in Sheet two, and gets information from the same row but a few columns over. I might be explaining this poorly, so here's a picture of what i'm referring to. I'm trying to fill in F6 in Sheet 1 with information from F2 in Sheet 2.
View 5 Replies
View Related
Apr 19, 2012
I have a Workbook that has a macro that, as of now, is referencing the Workbook's file name. I'd like it to just be referencing the worksheet itself (it is in the same workbook) so that when the file name is changed, the macro still works.
I know which part needs to be changed... just not what to!
Code:
Sub CopyData()
Dim Cell As Range
Dim DstWkb As Workbook
Dim DstWks As Worksheet
Dim R As Long
Dim Rng As Range
Dim RngEnd As Range
Dim SrcCols() As Variant
Dim SrcWks As Worksheet
[code]....
View 2 Replies
View Related
Mar 11, 2008
This seems really basic, but I can't seem to find it...
Using Visual Basic, if I have a named range, lets say like "NAMEDRANGE", how can I refer to cells in that range by their position in the range? For example, if I want to refer to the cell in the 2nd row and 3rd column of the range.
Also is their an easy way to refer to the first(top-left) cell in a named range?
View 3 Replies
View Related
Jun 5, 2008
Following syntax is incorrect, what is wrong? This should happen: Select op a specific worksheet (named DATA) in the workbook Report.xls and I empty the contents
Then I try with a 'With' statement to read the contents of a file named "sourcedata.xls' with helds a worksheet named "source". The values in this sheet should be tranfered to the sheet DATA in the workbook "Report.xls"
Sub FetchDataFromClosedWorkbook()
Dim FileName As String
Dim SheetName As String
Dim cellRange As String
Const ReportPath = "C:ExcelReports"
Windows("Report.xls").Activate
Sheets("DATA").Select
Cells.Select....................
View 3 Replies
View Related
Mar 21, 2008
I have a formula that I want to insert using a macro, so how do I iterate the * values in this line?
ActiveCell.FormulaR1C1 = "='Sheet1'!R[*]C[*]"
View 9 Replies
View Related
Jul 4, 2014
I am completely new to Macro's and VB and the macro below has been generated using the "Record Macro" function in Excel 2013 with a couple of very minor modifications based on some research I have done (hyperlink & input box). My ultimate goal is to make a copy of my "TEMPLATE", which is hidden and the copy could have a variety of names, then create an entry in my "SUMMARY" table that references cells on the newly created sheet. The new entry on the SUMMARY page should be entered in the next available row ... at the moment I need to make sure I have my cursor in the right place before I run the macro. I also want the first cell in the new "SUMMARY" row to create a hyperlink to the newly created worksheet.
The macro does what I need it to do, as long as I name the new sheet "Test", what I would like is for the Macro to recognise the name of the new worksheet and create links to that name. The rows and columns in each new sheet will remain the same, hence the R##C## part will always work.
The "SUMMARY" and "TEMPLATE" worksheet names will not (ever) change.
View 4 Replies
View Related
Jan 9, 2014
I'm using a macro to paste a formulae into a destination cell on another worksheet.
The problem is that I need the Macro to put the name of the active sheet into the formulae
VB:
Sheets("Front").Select
Range("E1").Select
Selection.End(xlDown).Select
Range("E3").Select
ActiveCell.Formula=INDIRECT(ADDRESS(MATCH(9E+99+306,*****ActiveSheet.Name*****!F:F,1),6,4))
The macro has to work whis way becuse I will be using it with multiple worksheets, all with different names.
View 9 Replies
View Related
Feb 26, 2010
How can I change the following line of code to reference Cell "D1" on the "Publish Details" sheet to replace the "D2:D"? ..
View 9 Replies
View Related
Jul 29, 2009
I have a macro which (see below) which will autofilter a spreadsheet to only show cases which are older than a 200 days. I'd like to add the ability for the end user to change the filter criteria as required (say from 200 to 300).
Ideally this would be done by having the macro reference cell G22 which is where I would allow the end user to change the filter criteria.
View 8 Replies
View Related
Dec 22, 2011
I am looking to start writing a code that will a row # from a dynamic cell within the workbook and use that row # to select the row and delete it.
Example:
In Cell G5=8
I would like the VBA code to see 8 as row 8 and delete row 8.
Row 8 is determined by looking up a name and finding which row it is in and returning the row number.
View 1 Replies
View Related
Aug 5, 2014
I have a worksheet with additional worksheet name listed in Column G, starting in G3.
I want to run this formula on each sheet, using the value in Column G as the WORKSHEETNAME.
=COUNTIFS(A7:A1000,">12/31/2010",A7:A1000,"<1/1/2012",F7:F1000,"Excluded")
Faulty example of what I'm trying to do:
=COUNTIFS('WORKSHEETNAME'!A7:A1000,">12/31/2010",''WORKSHEETNAME'!A7:A1000,"<1/1/2012",''WORKSHEETNAME'!F7:F1000,"Excluded")
I've tried INDIRECT, but I cant seem to make it work.
View 4 Replies
View Related
Aug 12, 2014
Where it is bolded I am trying to replace that with a cell reference such as A1 where I can input a website in that cell rather than edit the VBA code everytime
Here is the code:
Sub URL_Get_Query()
With ActiveSheet.QueryTables.Add(Connection:= _
"URL;http://quote.money.cnn.com/quote/quote?symbols=msft", _
[Code]....
View 1 Replies
View Related
Apr 10, 2014
I have a formula to extract the worksheet name and add the "!" to it so it can be used in a copied formula... I'm just having trouble writing the formula to reference the text in the cell with the worksheet name. If it's easier, I also have the list of worksheets without the "!" - e.g., Sheet1, Sheet2, Sheet3, etc...
I want the formula to calculate, in my example, the sum of 2 cells on a different worksheet.
View 6 Replies
View Related
Jan 7, 2014
Been having some trouble with this using VBA. I can't seem to get the code to run properly.
Actually, if there is a way to get a right footer on one worksheet to be referenced in a cell on another, that would be even better but I haven't been able to find anything like that.
View 2 Replies
View Related
Dec 6, 2013
I've done this loads of times before but doing it this morning seems to not be working at all.
Previously I'd be in Sheet 1, I put the equals sign, I click into Sheet 2 in the cell I want, hit enter, and hey presto the external cell is referenced in Sheet 1.
However, what I'm trying to do here is not reference individual sheets within an excel document, but reference a totally separate Excel document. Can I do this or not?
If so how? Because when I select the second worksheet after I've entered the = sign, it just takes me to the second sheet - it doesn't seem to 'remember' that I'm in the middle of a formula.
View 4 Replies
View Related
Aug 12, 2006
I have recently learned a little about Excel. Enough to be able to do our payroll for my company on it. My question is: On the 1st page of my workbook, is my quarterly report which shows all taxes, social security, and medicare we hold out each payday for each employee. The rest of the worksheets are for each employee. How do I have each employees withholdings automatically go to my quarterly report page?
View 5 Replies
View Related
Feb 27, 2007
I'm trying to reference a cell on another worksheet in my criteria and the formula doesn't seem to be working. All I get is a value of 0.
= SUMIF(G3:G76, ">='City Wide'!B6",I3:I76)
If I replace 'City Wide'!B6 with an actual number the formula works. This does not help as 'City Wide'!B6 is a value that can change.
View 4 Replies
View Related
Oct 22, 2013
When ever I update my external CSV file and hit refresh all data, I get #REF! Errors. The CSV file has a table that changes daily. Thus the "A" Column has a different number of rows depending on the day. The problem is that Monday the CSV file will contain 700 Rows, while on Friday it will have 200 Rows. I end up with a lot of #REF! Errors friday. How do I write the code so that (A561 for example) does not change regardless if it can reference the target cell or not? I even thought of making a macro that just copied the formula into all of the cells after each refresh, but there must be a better way.
Example code
=IF(A561>0,IF(Start!$H$2="Monday",'calculations-mon-sat'!O561,calculation!O561),"")
=IF(#REF!>0,IF(Start!$H$2="Monday",'calculations-mon-sat'!O567,calculation!O567),"")
View 2 Replies
View Related
Jun 19, 2014
I'm trying to make a vba that would save the file with the end date that will reference to a certain cell that user selects it. Working Sheet is a name of a File, and Current Sheet is a name of the panel where user will select the date.
ActiveWorkbook.SaveAs Filename:= WorkingSheet("Control Sheet").Range("D3").Value & Format(Date, "yyyymm") & ".xlsm", FileFormat:=51
But here i seem to missing the location
And I tried this one:
ActiveWorkbook.SaveAs Filename:="X:Work2014WorkingSheet& Format(Date,"yyyymm"). & ".xlsm" _, FileFormat:=xlOpenXMLWorkbookMacroEnabled, CreateBackup:=False
but it keeps popping up as 'expected end of statement' for yyymm?
View 8 Replies
View Related
Jan 4, 2010
I am trying to open a stored file on a network drive (with the file location stored in cell E4). When I try to run the macro, I get an error message on Line 3. (Sheets(E4.Value).Activate)
Does anyone know what I can do to fix this, or have a better method to open the closed files?
I've read that it's possible to reference information from a closed sheet, but I don't think that I'm experienced enough in VBA to take on that effort yet.
View 7 Replies
View Related
Jun 14, 2006
I've been tasked with redoing a revenue report at work, and in my head I've conjured up what could potentially be a huge time saving way of doing things in the future, although have searched help files and looked around online and can't find the formula/macro (if it exists) to enable me to do this.
The problem is this:
Sheet 1 of the workbook is a large input sheet. Every row contained in that sheet will, in column A, be titled 'red', 'yellow' or 'green'. Columns B onwards contain other data which (at the moment) is irrelevant to the problem.
Now what I want excel to do after I've put the raw data into the input sheet (sheet 1), is to read the text in column A for each row, then automatically copy ALL data in that row over to the next empty row on another worksheet.
ie Sheet 2 will have all rows that have 'Red' in column A on the input sheet, Sheet 3 will have all those titled 'Yellow' and Sheet 4 will have all those titled 'Red'.
I know I can use a filter on the input sheet to just show the data I want, but each colour coded row will contain different data to another, and if there is a formula/macro setup i can use to do the above, then I can set the subsequent worksheets up to hide the superflous columns from the input sheet.
View 9 Replies
View Related
