I am using a For Next statement that doesn't return the results for all the rows. The statement is as follows:
For Row = 1 To 100
If ActiveCell.Value = "CHANGE" Then
ActiveCell. Offset(0, 2).Range("A1").Select
ActiveCell.FormulaR1C1 = "=RIGHT(""0000""&RC[-1],20)"
ActiveCell.Offset(1, 0).Range("A1").Select
ElseIf ActiveCell.Value <> "CHANGE" Then
ActiveCell.Offset(1, 0).Range("A1").Select
Else: Range("A1").Select
Exit For
End If
Next
Range("A1").Select
I hope I did that according to the rules. It only returns the result in the first cell that does have a value of "CHANGE". It seem to be going through the entire range of cells, but I'm not getting any results.
Hello I'm looking for some clarification about how to use "= SUM(RC:RC)". I don't understand what the RC:RC represents. I thought that this was the directions for where to "position" the formula, but I think I'm missing something.
I was able to include the correct cells that I need summarized, but the answer is not right; it's zero.
I once heard that in order for a macro to insert a formula you must double all the quotations. Anyway, i did so in the following macro but i got an error message.
I need a macro that will insert this formula: =Trim(IF(B3="","",MID(B3&", "&B3,FIND(" ",B3)+1,LEN(B3)+1))) into column C starting on row three through the end of the spreadsheet information.
I typed this incorrectly when I first posted. I need it to fill down into only column C not the end of the spreadsheet.
I need a macro that will insert a column next to column B, and insert formulas into the new respective cells. forumula needs to be in the macro, it won't be located somewhere else on the sheet (for simplicity's sake, let's just say the formula is =A1+B1, then A2+B2 in the next row, etc). Also, it needs to stop inserting formulas when there's no more data in column B.
My macro inserts the formulas correctly up until the last loop where I get an Application Defined or Object Defined error on the .FormulaR1C1 line. The msgbox returns the correct values.
iCtr = 0 'data starts on 1 For c = 6 To 14 'columns F to N iCtr = iCtr + 1 MsgBox ("Column " & c & " Index " & iCtr) With . Cells(6, c) .HorizontalAlignment = xlCenter .NumberFormat = "#,##0;;" .FormulaR1C1 = "=IF(ISBLANK(INDEX(MyNamedRange," & iCtr & ",1)),"""",'" & Replace(MainPage.Name, "'", "''") & "'!R" & NextRow & "C6)" End With Next
I have a situation where I have to curve fit data, this can lead to different formulas being used with varying constants.
Is it possible to pickup a TEXT based formula and related constants from other cells, and then place this into another cell as a functioning formula. For Example
Cell A1 contains the formula as a text string whether it be y=a+bx+cx^2, or y=a+b/x, etc Cells A2:A6 contain the individual constants, a, b, c, etc
I would then want the VBA to read the text based formula and put it into an output cell as a functioning excel formulae.g
In cell B10: =a+b*A10+c*A10^2
I understand picking the constants up and putting the formula should not be too much of an issue, however trying to insert the variable form of the curve fit is the part that I am struggling with, and am unsure if possible.
I have a folder for each month, and in the folder there are worksheets for each day of the month. eg for January folder, it will contain 31 worksheets. They all have the same column headings. I want to know if there is any way i can use a macro to automatically insert a formula in each worksheet, using loop?
I have a worksheet that contains data arranged in fields from columns A to J. The relevant columns for the purposes of the macro are columns B (customer codes) and G (sales values). Column B may contain a single instance of a customer code, or multiple (over 50), depending on how active a customer has been. The worksheet always contains many different customer codes with varying numbers of rows for each customer, sorted by customer. What I'm trying to do is write a macro that will loop through the worksheet and insert a blank line immediately after a change in value of column B (customer code), and in this blank line, insert the customer code in column B (which comes from the cell immediately above), a sum formula for all values within a range that relate to that particular customer in column G, and an IF statement in column J that relates to the SUM formula. The loop concludes when there are no longer values in column B.
I have managed to insert blank lines on change in values in column B, but am not sure about the best approach for inserting the SUM formula or the IF statement in columns G and J respectively.
I have recorded a macro code for which is as follows. This Macro goes into a worksheet and gives percentile value for a range of data. But this is becoming cubersome as this sheet is 65531 rows and can span multiple spread sheets. Can this be put in a loop of some sort to go through the whole worksheet? ....
I'm trying to create a macro to insert a formula into a specific cell. The formula is meant to check if a cell has text, and then if it does, search for the text on another page.
I had a go at the code, but keep getting Runtime error 13.
I'm using Excel 2010
Code:
Sub new_entry() ' ' NEW_ENTRY Macro Dim rowNo As Integer
I would like to create a change event macro that will update multiple formulas that pull data from various tabs on a file. The tabs are named with a single date. So ideally when a certain master cell (Allocation!H2) is updated to the current date the macro will be prompted to update the range that contains formulas and update accordingly...so its and index match fomula based that has a variable being the tab name which is a date. I have a range of dates in cells F4:AB4 and want the formula to go into F5:AB5, I can then fill that down to whatever row I want...that bit I can handle.
Private Sub Worksheet_Change(ByVal Target As Range) Dim KeyCells As Range Set KeyCells = Worksheets("Allocation").Range("H2")
I have to use several dozen pivot tables a day. I already use a couple of macros to do a lot of the tedious formatting, but if I could automate this it would save me a lot more time. I have been trying to both write a code and modify code written by the recorder but have not even come close to anything that works. What I want is to have a macro that searches through the column header for predefined names and if it comes across one of these names it will insert a specific formula, based on its name, in the first cell below the header. Then it will autofill to the last row and move on to searching for the next predefined header name. If that name is not found, it will move to the next predefined header name. One major problem is that the formula to insert under any specific header name is based on other columns in the table that aren't always in the same range. So, not only do I need it to search for columns to place a formula in, that formula has to search for the appropriate column to find the correct value to use in the calculation.
For example, one predefined column name would be Avg Price. The formula for that column would be (Sales/Qty Sold), but these 2 columns could be located anwhere in the table. How can I get it, once it has found a column that needs a formula, to locate the correct column/cell to get the correct value from the sales and Qty Sold columns?
I have a formula that works fine in the cell of an Excel spreadsheet but I'm struggling to translate it into VBA (your help please).
The cell formula is:
=If(B2="", "", B2 & " (version: " & F2 & ")")
I want to iterate through all rows in my spreadsheet (about 2000) incrementing the relevant row numbers in the formula @ each pass - eg changing B2 -> B3 -> B4 etc and F2 -> F3 -> F4 etc where column 'B' contains the name of the product and column 'F' contains the version number, resulting in "Product Name (version: 123)" per row.
The closest I've got to this is:
Sub LookupNameInColumnA() Range("A2").Select Dim i As Integer For i = 1 To Selection. CurrentRegion.Rows.Count - 1 ActiveCell.Formula = "=IF(B2="""", """", B2 & "" Version: 999"")" ' problem line? ActiveCell.Offset(1, 0).Select Next i End Sub
This works OK'ish but I want each line to reflect the different data per row. I'm struggling to increment row 'B' and row 'F' in the formula, having tried "B & i + 1" and "F & i + 1" but am getting confused with quotes and concatenating strings within formulas.
I am trying to write a macro that will insert a formula directly into the cells in column M of my worksheet.
The worksheet has about 3400 rows. When I run the macro it does not adjust the cell reference in the formula so I am getting the same value in all 3400 rows.
I'm trying to insert the following formula into cell AA11. For some reason I keep getting a 1004 Runtime Error. I'm assuming there is some type of syntax error. I'm not really sure what I'm doing wrong.
I am trying to use the code below to enter formulas into two different cells.
The first code "ActiveCell.FormulaR1C1 = "code" is running ok.
But the second one "ActiveCell.FormulaR1C1 = "=IF(IFERROR(IF(AND(1*LEFT(D2,2)>=61,1*LEFT(D2,2)<=65),VLOOKUP(AA2,'abc'!A:C,3,FALSE),""),"")="",D2,D2&AA2)" is getting error.
Sub Combine() Dim wbk1 As Workbook, wbk2 As Workbook
How can a formula perform the equivalent of the keyboard alt enter in a cell? ie Make =A1&A2 where A1 and A2 are cells containing text become a1text a2text in the new cell.
I want to make changes to a cell's formula when a combobox option is clicked, I can make the changes using sheet1.cells(x,y) = "=WHATEVER(bla,bla,false)" The problem is that when I run the program and make a change in the combobox, false is written as 'false' in the cells formula, which drives it into not working and displays ####### as the cells result.
I am making a deposit sheet schedule, which has 10-15 batches of deposits that are entered one after the other, vertically. Each deposit entry can be allocated to many different expense accounts, so a deposit will be 500 with 400 to rent, 50 utitilies, etc. So I need multiple summation rows
So, I want to add a sum row beneath each set of deposits.
My problem is that each deposit is a different amount of rows long.
I was thinking of doing something like this:
'totalRow() is each row where the summation formulas will go totalRow(0) is not an actual sum row, but tells me where the first row of data lies.
I don't know how to reference the ranges I want to sum, because I don't know how to increment the reference to the column (i.e. changing A to B to F to G, etc.) with the Range().Formula construct.
I was thinking of using R1C1 somehow but I'm not as familiar and I don't think you can use r1c1 & Range() at the same time.
when you decide to cancel the option from choosing any picture I keep getting the debug error, "Run-time error '1004': Insert method of Pictures class failed". I would like it not to error out at all, obviously.
'If myPicture = Null Then 'MsgBox ("You did not make a selection.") 'Else If myPicture "" Then ActiveSheet.Pictures.Insert (myPicture) ActiveSheet.Shapes(ActiveSheet.Shapes.Count).Select
I need a macro in Excel sheet. What I need is If Cell Value A4 = India then it should insert one row automatically after Row A10 & Value of Cell A 11 should be "VAT".
i'm sure this can be done but i cant get an angle on the method. i want to use VBA to put a formula into cell G3 based on the users entry in cell D3 so, for example the user enters M in cell D3 and the VBA code puts the formula "if D3="M",A3,0"into cell G3
i know i could use a formula in the cell but i want it to work with multiple entries so i figure VBA is the way to go.
I want to insert a new row that contains the formulas of a fixed row (1:1). The inserted row is changeable and is determined by whichever is the current active cell.
Eg:
Active cell is something random like E16
I want to add a new row but don't want a blank row - rather want a row that contains the properties of 1:1
