I am trying to insert an if statement in a cell. Part of the reference is in cell as4.
I want the if statement in cell as5
[Code] .......
I get a run-time error '1004':
Application-defines or object-defined error
The code works fine without the if statement, i.e.
[Code] .....
I am trying to add insert rows using macro.
L column fills with numbers. if L1 value is 5 then below need to insert 5 rows.
I tried below Macro.
But it getting Error.
Sub InsertRowswork1()
Dim LastNumber As Long: LastNumber = ActiveSheet.Range("L" & Rows.Count).End(xlUp).Row
While LastNumber >= 2
If Not IsEmpty(ActiveSheet.Range("L" & LastNumber)) Then
[Code] .....
I have a situation where I have to curve fit data, this can lead to different formulas being used with varying constants.
Is it possible to pickup a TEXT based formula and related constants from other cells, and then place this into another cell as a functioning formula. For Example
Cell A1 contains the formula as a text string whether it be y=a+bx+cx^2, or y=a+b/x, etc
Cells A2:A6 contain the individual constants, a, b, c, etc
I would then want the VBA to read the text based formula and put it into an output cell as a functioning excel formulae.g
In cell B10: =a+b*A10+c*A10^2
I understand picking the constants up and putting the formula should not be too much of an issue, however trying to insert the variable form of the curve fit is the part that I am struggling with, and am unsure if possible.
I'm trying to insert the following formula into cell AA11. For some reason I keep getting a 1004 Runtime Error. I'm assuming there is some type of syntax error. I'm not really sure what I'm doing wrong.
View 6 Replies View RelatedI can't insert this formula to cell via VBA.
Code:
Range("AB38").Formula = "=TAN((RADIANS(VLOOKUP(G38,TABLE_24))))*(Z38-AA38)"
I'm having some trouble trying to get excel to input a formula into a cell. I'm still a novice at VBA right now, so I don't think my problem will be too much of a brain buster.
I want a formula in Cell A6 (and I already know it correctly works) in this format: =E6&VLOOKUP(I6,'FA-Fund Data'!B$1:C$2000,2,FALSE)&J6
i am having problem with doing team, i would like to lock cell contain formulas but allow users insert row.
View 2 Replies View RelatedI am trying to use the code below to enter formulas into two different cells.
The first code "ActiveCell.FormulaR1C1 = "code" is running ok.
But the second one "ActiveCell.FormulaR1C1 = "=IF(IFERROR(IF(AND(1*LEFT(D2,2)>=61,1*LEFT(D2,2)<=65),VLOOKUP(AA2,'abc'!A:C,3,FALSE),""),"")="",D2,D2&AA2)" is getting error.
Sub Combine()
Dim wbk1 As Workbook, wbk2 As Workbook
fileStr = Application.GetOpenFilename()
[Code].....
I try to put a formula to a certain cell using this code, but I get application defined or object defined error:
HTML Selection.Cells(1).Offset(0, 5).Formula = "=INDEX(range1;MATCH(""D""&C13;range2;0);MATCH(""S""&D13;range3;0))"
The weird thing is, that if I type the same formula itself to a cell, it works, so the problem shouldn't be with the formula:
HTML =INDEX(range1;MATCH("D"&C13;range2;0);MATCH("S"&D13;range3;0))
On the other hand I tried to replace the formula in my VBA code with simpler one, like this one and that worked aswell:
HTML Selection.Cells(1).Offset(0, 5).Formula = "=a1+a2"
I'm using the below to code to insert a formula in cell E1, what am i doing wrong here.
View 5 Replies View RelatedHow can a formula perform the equivalent of the keyboard alt enter in a cell?
ie Make =A1&A2 where A1 and A2 are cells containing text become
a1text
a2text
in the new cell.
I want to make changes to a cell's formula when a combobox option is clicked,
I can make the changes using sheet1.cells(x,y) = "=WHATEVER(bla,bla,false)"
The problem is that when I run the program and make a change in the combobox, false is written as 'false' in the cells formula, which drives it into not working and displays ####### as the cells result.
I am making a deposit sheet schedule, which has 10-15 batches of deposits that are entered one after the other, vertically. Each deposit entry can be allocated to many different expense accounts, so a deposit will be 500 with 400 to rent, 50 utitilies, etc. So I need multiple summation rows
So, I want to add a sum row beneath each set of deposits.
My problem is that each deposit is a different amount of rows long.
I was thinking of doing something like this:
'totalRow() is each row where the summation formulas will go totalRow(0) is not an actual sum row, but tells me where the first row of data lies.
For Each cell In Range("H" & (totalRow(x - 1) + 1) & "", "J" & (totalRow(x - 1) + 1) & ":N" & (totalRow(x - 1) + 1) & "", "P" & (totalRow(x - 1) + 1) & ":AB" & (totalRow(x - 1) + 1) & "")
cell.Formula = "=sum(Range(""A"" & (totalRow(x - 1) + 1) & "":A"" & (totalRow(x) - 1)"
Next
I don't know how to reference the ranges I want to sum, because I don't know how to increment the reference to the column (i.e. changing A to B to F to G, etc.) with the Range().Formula construct.
I was thinking of using R1C1 somehow but I'm not as familiar and I don't think you can use r1c1 & Range() at the same time.
i'm sure this can be done but i cant get an angle on the method. i want to use VBA to put a formula into cell G3 based on the users entry in cell D3 so, for example the user enters M in cell D3 and the VBA code puts the formula "if D3="M",A3,0"into cell G3
i know i could use a formula in the cell but i want it to work with multiple entries so i figure VBA is the way to go.
I want to insert a new row that contains the formulas of a fixed row (1:1).
The inserted row is changeable and is determined by whichever is the current active cell.
Eg:
Active cell is something random like E16
I want to add a new row but don't want a blank row - rather want a row that contains the properties of 1:1
I want the macro to:
1. search A1:AZ1 to find the cell that has the text "VBA Test" in the cell. There could be other text in the cell as well - this is not an exact match - but these two words are the common text.
2. go to that cell
3. go to one cell below that
4. enter a formula (I've got it from here ....)
I am using a For Next statement that doesn't return the results for all the rows. The statement is as follows:
For Row = 1 To 100
If ActiveCell.Value = "CHANGE" Then
ActiveCell. Offset(0, 2).Range("A1").Select
ActiveCell.FormulaR1C1 = "=RIGHT(""0000""&RC[-1],20)"
ActiveCell.Offset(1, 0).Range("A1").Select
ElseIf ActiveCell.Value <> "CHANGE" Then
ActiveCell.Offset(1, 0).Range("A1").Select
Else: Range("A1").Select
Exit For
End If
Next
Range("A1").Select
I hope I did that according to the rules. It only returns the result in the first cell that does have a value of "CHANGE". It seem to be going through the entire range of cells, but I'm not getting any results.
I have tried =INDIRECT but that will not work.
I have a file name typed into cell C3. I want the formula in cell C4 (C5,C6,C7......) to include the name of the file typed into cell C3. The formula in cell C5 shows what the content should look like.
I want the users to be able to type the file name in Row 3 (C3,D3,E3.......) and have the formulas below them insert the file name and access the information from the files (yes the files can/will be open when we do this).
I need to to have at least twenty different formulas (rows) referencing specific cells in these files.
The formulas would look like this ='["File name from C3"]Audit Information'!$D$35.
I am hoping it may only be a syntax thing and someone here can "show me the way" I have tried &$C$3& with and without quotations with no luck.
Here is the test file. Test3.xlsm
I built a formula that should work, but it's too long so I need to condense it.
I have three columns, column 1 has names, column 2 has a formula.
I have 15 sheets, each with a name that could appear in column 1.
If the cell in column 2, sheet 1 is Bob, I want it to pull H5 from sheet bob. That works as:
=IF(A5="Bob", 'Bob Data'!H4, "Work in Progress")
But if I build that formula for all the possible names, it's too long. Is there a way to make the formula autofill with the name in cell A5
So: =IF(A5="XXXX", 'XXXX'!H4, "Work in Progress")
I can use the MATCH function when i am in excel but i am having trouble getting it to work when i am trying to insert the formula using VBA.
Here is the code i have but it wont even compile........
I need to do two things in my Excel spreadsheet: 1) I want it to insert a blank row everytime a value in the 1st column changes. 2) In the blank lines, I want to do a COUNTA for each of columns G through N. If I can get the program to insert the blank rows...they will not be a set # of records apart...some will have 3 records & some might have 17 records. Is there a way to automatically cause #2 to happen instead of having to choose the function icon and then tell Excel the first and last cells in each range?
View 1 Replies View RelatedHello I'm looking for some clarification about how to use "= SUM(RC:RC)". I don't understand what the RC:RC represents. I thought that this was the directions for where to "position" the formula, but I think I'm missing something.
I was able to include the correct cells that I need summarized, but the answer is not right; it's zero.
Public Sub SubColumn(CritStr As String) ...
When I enter this formula I get a #VALUE! error. I think it's because cell AG46 has an IF formula that results in "blank" if 0. How do I fix this error so that it includes cell AG46 and if cell AG46 is blank it counts it as a zero?
=SUM(A12)-(AG46*8)(=40 is the answer I'm looking for)
=SUM(40)-(0*8)
I am trying to do Vlook up but the reference cell indicates formula error even if this has values.
I have to do F2 in every cell to make the Vlookup work. Is there any way to remove this?
A1 refers to B1 which contains a number or #VALUE!
What could I use in A1 to return a number and if B1 = #VALUE!, a zero.
I need to change the colour of cells depending on contents. The following code works perfectly until I try to insert or delete a row in the worksheet. Then I get Run-time error 13, Type mismatch.
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Set I = Intersect(Target, Range("E5:E100"))
If Not I Is Nothing Then
[Code]....
I need to insert rows in row A44 depending how many cells exits in a range i named "ALL_C"
I saw this code that inserts 10 rows on A44 so i thought by modifying it the way i did would work but it didn't. I'm still new at this stuff. What am i doing wrong?
Original
Sub Insertinrow43()
Range("A44").Resize(10, 1).EntireRow.Insert
End Sub
Modified (doesn't work)
Sub Insertinrow43()
Range("A44").Resize(Count(All_C), 1).EntireRow.Insert
End Sub
Thank you!
I have a master data sheet with four columns, A, B, C and D
Column A has the primary data and B,C,D has dependent data values;
So when I insert a new cell in Column A with cells Shift Down, I want mandatorily new cells to be inserted in the same row in col B, C and D as well so that data integrity is maintained;
The below code was working absolutely fine yesterday but since this morning I am getting an error: "Insert method of range class failed" at the following line:
[Code].....
Here is the complete code.
[Code].....
I have googled it and didn't find any workable solution. My DataEntry sheet is unprotected.
I'm trying to copy an ELOOKUP formula down a column in a sheet. The formula is losing part of the table array when I carry it down and returning an N/A error. Interestingly, it will work when I copy it across a row.
View 9 Replies View Related