i'm sure this can be done but i cant get an angle on the method. i want to use VBA to put a formula into cell G3 based on the users entry in cell D3 so, for example the user enters M in cell D3 and the VBA code puts the formula "if D3="M",A3,0"into cell G3
i know i could use a formula in the cell but i want it to work with multiple entries so i figure VBA is the way to go.
Trying to write a formula that looks for the first number in the same row, then returns the value in that column in a different row. In the example included, cell A-7 should contain the formula. Within row 7, determine the column where the first number is listed (column D in this case), then return the value listed in row 3 of that column ('C' in this case).
I've tried Lookup, Index, and Match functions, but can't seem to get the right combination.
=IF(E14<=0,0,IF(N9="yes",MAX(E15*C15,30),30))
I am currently using the above formula and need to make an addition to it.
If D8 is greater than 9000 and less than 9999 then the entry will be 35 rather than 30. Any other entry in D8 would leave it at 30
Is there a way you can copy formulas to the next line when a new entry is automatically added to a spreadsheet via a form?
View 1 Replies View RelatedI have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
making a macro that will scan for duplicates, length & empty cells.
I have the sample file below that does conditional formatting but it doesnt help as much because I want to show the reason for the highlight's on a comment instead.
sample file : [url]
file that might help out: [url]
checks would be:
column A - duplicates and/or length should not be over 100 characters
column B - duplicates
column F - should only contain 2 comma's(or 3 keywords)
all columns - check if no entries are found(empty cells)
Is there a formula that will allow me to look for the existence of any number value in a row of one worksheet and then return a specific number value in a cell on another worksheet? For example, if the formula finds any number value it will always return the number 15 to a cell on another worksheet.
View 3 Replies View Relateddont know if this can be done using a formula rather than VBA...but is there a formula that would change the countif range based on another cell entry. so the formula below has a column range of 2...so the other cell entry would be '2'.
=COUNTIF(B1:C1,"=Y"). If i then changed the cell entry to '4' the formula would change to. =COUNTIF(B1:E1,"=Y")
I will try putting the Code Tags in correct this time, I think I figured out what I have been doing wrong.
This code will allow one cell to make a sound when a condition is met. I am trying to have each cell stand on its own. Example cell A1 would sound a Ding if the number >100 and cell A2 would sound a Tada if the word Cat would be returned ....
i'm trying to basically use VBA, so that when a list of work tab names are entered into a column in say Sheet 1..these tabs are then selected.
View 4 Replies View RelatedI have a dilemma.
1.I want to be able to a have a cell be filled with a certain value when the user enter data in Column C.
2.I know that this can be accomplished by a formula, but my spreadsheet will work my efficiently with a macro.
3.I do not know much about VBA but I believe that I will need a macro for each sheet that fills in the word.
I would like to write the code or create a macro that will execute when the value of a range of cells is greater than null. The macro or code that I would like to execute will UNHIDE a group of consecutive rows.
View 14 Replies View RelatedI have a workbook with 3 worksheets which contains a single spreadsheet where the user enters data and 2 worksheets containing all the named ranges and formulas(divided up by product model) used on the data entry worksheet. What I've been trying to accomplish is to choose one worksheet based on which product model I select on the data sheet.
View 1 Replies View RelatedI need to force our salespeople to enter information in a cell based on a condition. This is the condition: If I5=3, then I need to move the user to cell I3 with a message that says "Enter miles to site" -- I don't want them to be able to move from the cell until they enter the information. If I5 does not equal 3, then I don't need anything to occur. I need to apply this code to four separate worksheets in the same workbook. Also, they will be entering a number in cell I3, so is okay to leave I3 formatted for Number or General Number? Note: This question is also posted at the following link, but has not yet been answered by that group: http://database.ittoolbox.com/groups...dition-2270643.
View 2 Replies View RelatedI have a sheet that I fill out with customer data then print and start over with the next customer. This requires me to tab and delete through the sheet before starting the next entry and I am wondering if there is some way to auto clear the unlocked cells based on a single entry IE when we entered new data in the 1st field this would clear the unlocked cells and make them ready for new data?
View 14 Replies View RelatedI am trying to do with data validation, trying to stay away from vba on this... and it is probably very simple:
Cell A1, they can select Rice, Cheese, or Rabbit
I want to use custom data validation on B1, so that if A1 = Rabbit, they can only enter 1. If it is blank or the other two choices, they can enter 1 through 10.
Can I do that with data validation? I can't get any if thens to work in it.
how can I prevent an entry in a cell even without formula lets say cells B1 , C1 , D 1 , E1
I want to prevent an entry in these cell and if you try an error message will display
I have a problem to solve
I have 2 worksheets named 'Products' and 'Order'
At the 'Order' i use 3 cells
Code
Pallets
Cases
When i entered a code to the cell 'code', it reads the code from the sheet 'Products' and then transfers to the active sheet 'Order' some items.
What i want is:
Because the user has to enter the quantity either to the cell 'Pallets' or
'Cases' i want to be locked the empty cell each time and to be used for calculations.
1st Eg.
The "45870"
Pallets to order : 50
because the user used the pallets the cell "Cases" must be locked and it must calculate the 50 pallets*100 so
Cases : 5000
2nd Eg.
The "45870"
Pallets to order : null
Cases : 5000
because the user didnt use any pallets the cell "Pallets" must be locked and it must calculate the 5000 cases/100 so
Pallets to order : 50
I'm trying to set a cell so that it has a certain value based on other cell(s) information. I can put a formula into the cell to do that, but I also want to make the cell available for user input, preserving the formula should the user change their mind and delete their input.
Basically, it's a cell with a protected formula that can be overridden with user input, then if the user decides to take their input back out, the formula kicks back in.
I have the following formula in cell H2:
=AND(EXACT(G2,UPPER(G2)),(LEFT(G2)>="A")*(LEFT(G2)<="Z")*(MID(G2,2,1)>="0")*(MID(G2,2,1)<="9")
*(MID(G2,3,1)>="A")*(MID(G2,3,1)<="Z")*(MID(G2,4,1)>="0")*(MID(G2,4,1)<="9")*(MID(G2,5,1)>="A")
*(MID(G2,5,1)<="Z")*(MID(G2,6,1)>="0")*(MID(G2,6,1)<="9")*(LEN(G2)=6))
I would like to prohibit data entry in G2 if H2 reads "false" and allow data entry in G2 if H2 reads "true" .
i am trying to find a way to automatically copy information from a worksheet on my computer([list.xls]-List of accounts) to a worksheet on a shared folder([summary.xls]- accounts that have paid)
example:[list.xls]Sheet1!A:A has account numbers, C:C has account balance and D:D has notes on account.
If D:D is "paid", copy acc# to [\foldersummary.xls]Summary!A1, balance to B1 and notes to D1.
If D:D is "payment pending" do same as above but in row 2 and so on.
i need a macro which puts the formulas into the cells as per attached.
the number of rows between the "beam" can be variable
the number next to the beam will be variable.
the number of "beam" rows is vaiable
my thoughts where to do a find"beam" and refernce the cells address the create formulas off those points but dont have the skill to code this
beam macro.xlsx
I have to use several dozen pivot tables a day. I already use a couple of macros to do a lot of the tedious formatting, but if I could automate this it would save me a lot more time. I have been trying to both write a code and modify code written by the recorder but have not even come close to anything that works. What I want is to have a macro that searches through the column header for predefined names and if it comes across one of these names it will insert a specific formula, based on its name, in the first cell below the header. Then it will autofill to the last row and move on to searching for the next predefined header name. If that name is not found, it will move to the next predefined header name. One major problem is that the formula to insert under any specific header name is based on other columns in the table that aren't always in the same range. So, not only do I need it to search for columns to place a formula in, that formula has to search for the appropriate column to find the correct value to use in the calculation.
For example, one predefined column name would be Avg Price. The formula for that column would be (Sales/Qty Sold), but these 2 columns could be located anwhere in the table. How can I get it, once it has found a column that needs a formula, to locate the correct column/cell to get the correct value from the sales and Qty Sold columns?
Is there a way to incorporate these 3 boxes into one? So if I enter a figure into any cell, it will calulate it for the other two? Without overwriting the existing formula. I have attached the problem.
problem.xlsx
I have a row of dates in row 2 (all sequential, from Nov through to June next year)
I have a row of number entries in row 3 (to correspond with the date in row 2 it was entered on).
I want to be able to add a new entry (a number) into a text box, click a macro button, which makes the text box input be moved into the cell underneath todays date (so every day the cell will move one column along)
I've managed to make myself a textbox, and a macro button, but I'm stuck with how to make it all work.
If A1 = "Yes"
Then don't allow input into cells B1 and C1. Or delete anything in B1 and C1 perhaps?
Cell A1 would be the result of a formula
How would I go about creating something like the above?
I am looking for a forumla, which I think will be an If forumla, to allow/block entry into a cell depending on what is entered in another cell.
So if "Yes" is entered into cell 1, I want cell 2 to show "N/A", and if "No" is entered in cell 1 I want the user to be able to enter data into cell 2.
I need a formula that displays the word "Day" or "Days" depending on cell entry i know the formlula =IF((B12)>0,"Day","") to show the word day but i want it to show "day" if a 1 is entered or "days" if any number over 1 is entered.
View 2 Replies View RelatedI have a spreadsheet with 'due date' for returns in column L and 'received date' for returns, in the adjacent column M.
I would like to get the due date to turn red when it is overdue, ie. the date in the cell has arrived and no return was submitted. By trawlling the forum, I managed to accomplish this with the following in conditional formatting:
Cell value is less than or equal to =TODAY()
All's great.....but - I would like the date to turn back to black if I enter a date in the adjacent received column, column M.
In other words, I want to flag a problem if the due date has passed, but once I receive the return and enter the date I receive it, i would like the due date entry to revert back to the original formatting ie. black. So only the outstanding returns are highlighted.
excal VBA programming.I have attached the file name "help" for your easy explanation purpose.
1. Is it possible to hide sheet nos. 1,2,3,4 & unhide the sheet as wished by me by puting the value (1or 2 or 3 or 4) in B3 cell.
2.There are per day production rate in E18 to E22 cell. Now whenever I will give value in H18 or H19 or H20 or H21 or H22, it will check whether the value is same with the respective E 18 or E19 or E20 or E21 or E22 cell. If both the values are not equal then give a message box "WARNING!!! YOUR VALUE IS NOT SAME". Can it be possible by creating VBA programming.
