Macro To Sort Rows By Date Order
Feb 21, 2007
Starting at E8 and going down the E column there is a list of non sequential dates that could potentially be very small or extremely large. These dates must be sorted in ascending order together with all the data in their respective rows so for example
John Ball 20/2/07
Mark Dunn 19/2/07
Tim Jones 18/2/07
should be sorted as
Tim Jones 18/2/07
Mark Dunn 19/2/07
John Ball 20/2/07
If anyone can write such a piece of code it'd be very time saving.
View 5 Replies
ADVERTISEMENT
Nov 19, 2009
I have data going in to a small table which has some empty rows as that data is not yet available... My problem is, I need to sort this table in date order but with the date nearest to today's date at the top...
The sort function puts oldest at the top or oldest at the bottom which is no good for what I need...
I use xl 2003.
View 9 Replies
View Related
Oct 8, 2006
Is it possible to make excel sort ascending or descending but from mid way through alphabet and then loop through the alphabet again. for example. If Cell A1 had "A" in, it would sort as normal.
Cell A1 = A
Cell A2 = B
Cell A3 = C
Cell A4 = D
Cell A5 = E
If Cell A1 had "C" in, it would sort from "C" through the alphabet and then loop to the start of the alphabet as shown below.
Cell A1 = C
Cell A2 = D
Cell A3 = E
Cell A4 = A
Cell A5 = B
View 4 Replies
View Related
Jul 22, 2012
I am looking to create a sheet that automatically updates itself in alphabetical order, when we enter any data.
here is the case:
- I've 30 secondary sheets and 1 master sheet
-----------------------------------------------------sheets detail-----------------------------------------------
Master Sheet detail:
master sheet's column A contains name from A3 to A100 (user can edit this column)Column B to to AM contains data corresponding to each name in column A
Secondary sheets detail:
column A contains name from A3 to A100 which are linked to master's column A (means any change in Master sheets' column A will change this column).................. (user cannot edit this column)column B to I contains corresponding data.
------------------------------------------------------------------------------------------------------------------
I want that when user enters a new Name in master sheet and presses "Enter" then:-
Column A of master sheet should automatically arrange itself in ascending order, along with all the corresponding data in column B to AMsince secondary sheet's column A is also linked with master sheet, so they should also be updated along with their data in corresponding columns i.e B to I
I've tried other websites and solutions for sorting of rows but since i've little experience with excel VBA, things are not quite working for me.
View 5 Replies
View Related
Sep 21, 2008
I've got up to 150000 rows in excel (2007) and i need to sort the data into 2 sheets.
Sheet1 contains all the data. Sample:
1000999999027FRESH PASTA FETTUCINE WITH TOM102002P N0809100000035000000012810000000+0000000+ 0000000000000000+0203001896409
2000999999027020300189640900000000000005740200070063
As you can see, the first row starts with 1000 and second with 2000. That would be the criteria. All other rows goes exactly the same.
I need macro that copies all the rows starting with 1000 onto sheet2 and all the rows starting with 2000 onto sheet3.
Filtering and copy/paste won't help, because the list is toooooo big. Thatswhy only hope is to find macro that loops threw the list.
View 14 Replies
View Related
Aug 24, 2009
I have a spreadsheet that I would like to create a sort macro for. The number of rows will be variable but will always start in the same row. (i.e. ... it might be from A2:E200, A2:E300, A2:244. etc.) Some of the data fields will be blank.
How can I assure I am always getting the correct data selected to sort. I generally create my macros by recording and then sometimes tweaking them manually when necessary but I really don't know VB code very well. When I record a macro using the end/down and end/right combination, I get this
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
This may or may not always work depending upon how many blanks I have and where they are located. Here is a simple example of what my sheet may look like. Note column F is blank and column G has formulas that looks at the cells A:E in that particular row for evaluation. The sort only needs to go to row E although if it went further, I guess it wouldn't matter. I'm sure this is an easy problem to resolve but I just don't know what code to use.
******** ******************** ************************************************************************>Microsoft Excel - sort example.xls___Running: xl2000 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCDEFG1FIELD 1FIELD 2FIELD 3FIELD 4FIELD 5 FIELD 62AAA FORMULA3SSS11121010 FORMULA4DDD FORMULA5FFF 12 FORMULA6GGG26 9 FORMULA7HHH 7 FORMULA8JJJ 8 FORMULA9KKK14 8 FORMULA10LLL 16 FORMULASheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
View 9 Replies
View Related
Aug 2, 2007
i have A1:A60 filled with numbers. however, they are ordered incorrectly. how can i order then in B1:B60 in the following way?
1st cell
7th cell
13th cell
19th cell
25th cell
31st cell
37th cell
43rd cell
49th cell
55th cell
2nd cell
8th cell
14th cell
20th cell
26th cell
32nd cell
44th cell
50th cell
56th cell
etc.
until the 60th cell
View 9 Replies
View Related
Apr 21, 2008
I have a column which has dates in format: dd/mm/yyyy - there are no headers in this worksheet.
I need to sort the worksheet according to the row date field ... but it's causing issues.
It is assuming the dd is mm ... and when i reverse the format to yyyy/mm/dd before sorting - then it assumes mm is mm BUT it keep sorting with dd, regardless of the month. with both ways, the assumptions are interchangeable ...
View 3 Replies
View Related
Nov 29, 2008
I looked at threads realted to printing but wasn ot able to find something similar to what I need. So here is my problem:
I have a file with more than 100 worksheets (each sheet contains the invoice for one store). I would like to create a macro that would enable me to determine the order in which worksheets would be printed. How to do it?
Idea #1: the printing order would be based on the value in cell L1 that would contain the route number for each store. Stores belonging to the same delivery route will have the same value in L1. So, the macro should first print all sheets with 1 in cell L1, then print all sheets with 2 in cell L1 and so on...
Idea #2: Creating a separate data sheet with the list of all stores and their corresponding route number. Let's say info is contained in range A1:B150, where Column A contains the name of the stores and column B contains the route numbers. The macro then should look at that list to determine the printing order of the subsequent worksheets (the name of the store in column A would be the same as the name of the worksheet corresponding to that store).
Idea #3: sorting my 150 worksheets manually. It does not solve my problem fully, though, because stores do not always belong to the same route. So the manual sorting should be carried out daily and would not save time at all.
View 9 Replies
View Related
Sep 27, 2009
I have attached a worksheet to illustrate a "Before" (raw data) and "After" (desired results).
Each row contains data on a forex trade. The variables which must be assessed in each row are:
Currency Pair (e.g. GBP/USD).
Opening Time
Closing Time
What I need to do is delete many rows in the raw data because they reflect a condition I do not want in my analysis, which is having multiple open trades of a single currency pair during the same time period.
To perform my analysis I need to delete all trades (rows) which meet the above condition.
The worksheet provides examples, along with a rudimentary tool I've used to help me sort/delete rows manually.
Since I am looking at thousands of trades, a manual sort/delete is impractical. (my eyes don't like this kind of work!)
The rudimentary tool I've used in manual sorts/deletes is simply to have a column which returns a "1" if a trade opens before an older trade has closed. I do this by first sorting the data by (a) currency pair then (b) date opened. Then I must manually go through multiple iterations of deleting trades until there all of the "1's" have disappeared.
I'm hoping someone can show me a macro which might do this sorting/testing/deleting automatically, at least to the point where all I have to do is repeatedly press a "macro" button until there are no "1's"
View 8 Replies
View Related
May 9, 2014
I have a list of data with headings number,name, surname,group. Data needs to be kept in the rows as they are now but I would like to sort the order by group. The group order needs to be:
sm, u17m, u15b, u13b, u11b, sw, u17w, u15g, u13g, u11g. I would like to do this using vba and have a blank row between each group.
View 11 Replies
View Related
Feb 10, 2009
I need values from column F in ascending order.
Also I need in column G only the values without formula.
View 14 Replies
View Related
Nov 20, 2007
I'm sure this has been asked many times before, but I can't seem to find an answer that works for my data. I have some data that is sorted by an ordered list (like a table of contents from an overly detailed book):
1.0
1.1
1.2
1.2.1
1.3
...
1.11
...
This list can be arbitrarily deep (although probably not more than ##.##.##.##), and because I'm using periods to separate the nested levels (can be changed), I've formatted it as text. This means when I sort the data using this column I get 1.11 before 1.2 (text sort order).
After lots of failed formula attempts I've resorted to using an additional column with hand-entered values to sort by so it will sort correctly:
1.00.00
1.01.00
1.02.00
1.02.01
etc
but I'm hoping someone knows a more elegant way to do this, or at least to generate this column without typing so many zeroes!
View 9 Replies
View Related
May 30, 2008
I have a client with a list of books, and they are trying to sort a column in a sheet that has LC classification codes. When just doing a normal A-Z sort, it looks like this:
RJ 41 .D53 F54 2005
RJ 416 .L4 C52 1999
RJ 420 .D5T97 2003
RJ 421 .H385 2006
RJ 426 .H43 P43 2005
RJ 431 .M37 2003
RJ 436 .A8 R33 2006
RJ 436 .A8 T498 2001
RJ 436 .A8 T87 2003
RJ 45 .N4 2000
RJ 45 .N418 2006
RJ 45 .R92 1998
RJ 47 .E39 2001
RJ 48 .H37 2000
RJ 48 .H37 2002
RJ 48.2 .C537 2004
RJ 48.2 .P347 2005
RJ 48.2 .P385 2005
RJ 48.2 .R93 2003
RJ 480 .P34 2005
RJ 482 .R48 L448 2004
RJ 486 .C45 2000
What is weird about it is that I would think that the numbers after the RJ would be in numeric order but it seems to be treating them as codes. So, instead of RJ 41, then RJ 45, it goes on with a series of things that start with RJ 41. Is it normal for this to happen, or is there a way to change it so that it goes 41, 45, 47, 48, then 416, 420, etc.
View 9 Replies
View Related
Feb 13, 2007
I feel I've searched thoroughly and wasn't able to find the right answer. I've attached a daily report example that needs the "Product" field to be sorted in a particular order. The order should be JEX, Q3791J, YOO5, KLX9, GHT (all similar products need to be grouped together).
Since the report is run daily the number of rows changes daily: one day can have 50 entries and the next 10. Is there a way to dictate the sort order and insert a blank row between each product grouping?
Once the Products have been separated into their groups, how would I sort each grouping by the "Term" column?
View 9 Replies
View Related
Jan 31, 2014
Sorting.xlsx
I am trying to figure out how to make a macro that can sort some numbers from Largest to Smallest within a specific range on multiple sheets. The range is only within column D starting with cell D11: (until the data ends) on all the sheets in my workbook (the number of sheets may change with time) except for Sheets: "A", "B" and "C".
In other words I want the sort to work on all sheets except the first 3 sheets which are named Sheet A, Sheet B, and Sheet C.
I have attached a spreadsheet for an example of what I am saying.
View 5 Replies
View Related
Sep 16, 2008
I have a report that I drop down into Excel that is a transaction report for securities. The data for each security is in two rows. I would like to write a macro that would sort each two-line group by a certain cell in the group. If I could make the macro request the number of rows and columns in each range and the cell address of the cell to sort by, I would be able to use this macro for many different reports. Also, there has to be some way of telling the macro where to begin and where to end. I have some experience with macros although generally I "Frankenstein".
View 9 Replies
View Related
Dec 17, 2013
I have imported data and numbers from a website and would like to sort the data in numerical order. Excel wants to sort the data 1,10,2,20... in that order. I know from past experience with an older version there was a way to convert the numbers so they can be sorted in the way that I want.
View 2 Replies
View Related
Jun 14, 2014
I have 2 listbox (List1 and List2). List2 get populated when the user select a value in List1 and based on the value selected in List1. My issues are:
1- Values in list2 are not sorted in ascending order especially when the list2 grows over 32.
2- When the user selects "None" in List1, it should clear List2 (onclick)
I worked on this code for a while with no luck trying to get it to work. Is that doable?
VB:
Option Explicit
Dim ufEventsDisabled As Boolean
Function SelectedString() As String
Const Delimiter As String = ","
Dim i As Long
[Code] .....
View 9 Replies
View Related
Mar 15, 2014
Don't know if macro is better, but I would like to try it with function
I have 2 sheets.
Sheet 1
Column A: Name
Column B: Points
Exemple:
Name Points
Mary 40
Johnny 20
Erick 60
Ralph 30
I want Sheet 2 to get data from Sheet 1 and sort by descending order automatically.
Then it should be
Sheet 2
Name Points
Erick 60
Mary 40
Ralph 30
Johnny 20
I don't want to do it manually every time I change some value; I want it to do automatically; so if I change, for example, Erick's points from 60 to 10 in Sheet 1, Erick should appear on the last place in Sheet 2, with his new value (10)
View 1 Replies
View Related
Feb 20, 2009
I have a spreadsheet for work that consists of various columns of data. One important sorting column would be Job #. Inside this coulumn are data like 134-Q and 2355-P and 755-P for example. The sort now is like posted. I would like to be able to sort by both alphabetical and numerical order. ie, 755-P, 2355-P, then 134-Q.
View 5 Replies
View Related
May 1, 2013
My dates are sorting as per the image below.How do I get them to sort in chronological order (e.g. 01 January, 02 January etc)
Excel Forum.PNG
View 10 Replies
View Related
Nov 5, 2008
Im totally new to excel and have some data i need to sort. how to sort numbers into ascending order across a row. ie, I have 34 2 45 79 102 63 etc, and I need them to start low and order to high. i have over 1200 rows, so it would be good to do the whole sheet at the same time.
View 4 Replies
View Related
Oct 19, 2009
I have to sort data on 3 criteria
The data is:....
At this time I sort by HOURS then Seniority so the sort would look like this:........
Here is the problem, RN HILLER and JA DOE have the same hours and seniority. It is our policy that when 2 or more names and seniority match, they must be sorted by reverse order first letter of last name.
So this would be correct. H in Hiller comes before D in doe when reverse sorting.....
View 4 Replies
View Related
Oct 7, 2011
I have the below code that sorts a list of Doors that I have in row C17 downwards. Door 54, Door 7, Door 109 etc. The list is feeding a drop down box, people find the door they were looking for, in the said drop down box.
Code:
Sub ListSorter()
Dim LastRow As Long
LastRow = Range("C" & Rows.Count).End(xlUp).row
[Code]....
I wondered if there was some code I could add to the end of this, that would the sort worksheets, which are all named after each cell in the list, in the same order.
View 3 Replies
View Related
Sep 25, 2012
In the below code, when I want to sort on Column "A" it is not working. Anything stand out that would prevent my code from working?
Sub Delete_Duplicates()Dim LastRow As LongWith Sheets("SAP Raw Extract")Â Â Â Â
LastRow = .Cells(Rows.Count, "A").End(xlUp).Row    'Create ID Column       Â
.Columns("A:A").Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove        .Range("A1") = "ID"      Â
 .Range("A2").FormulaR1C1 = "=RC[5]&RC[6]&RC[32]"       Â
[Code] .....
View 3 Replies
View Related
Jun 17, 2009
I'm using a table with columns from A to F and an unlimited number of rows. Note that there is a title at the top of each column.
-I'd like my datas in column F to be automatically sorted in descending order from top to bottom when I hit the enter key or when the number is entered in last column (column F).
-the the entire row of data needs to be sorted according to the sorting criteria of column F ( datas entered need to stay on the same row)
-the macro should validate that the number value entered in column F is the same as the number value entered in column A. (to make sure that there was no typing mistake)
-Result in column D must be the difference between the corresponding value in column B and C (B-C=D)
*The next couple of constraints are not absolutely required, i'd like to have them only if it's possible to add constraints with filling color:
-Whenever there is no value entered in column C on a specific row I'd like the entire row to be colored in yellow (fill color)
-IF a number is entered in column C, and that the result of B-C in column D is not equal to zero, I'd like this specific row to be filled in Red.
-when all the values are entered in a row from column A to F and that the result of B minus C is equal to Zero in column D, i'd like this specific row to be filled in a green color.
***in other words, the datas in each rows from column A to F will be entered on 2 occasions; on the first time, only the datas in column A,B and F will be entered (so basically after entering this set of values the row should be filled in yellow. the second time, the remaining values will be added to the rows, so at this time A,B,C,D,E and F will all be entered. when this is done there will be two options
1-the value in column D is equal to Zero then the entire row should be filled in green or
2-the value in column D is'nt equal to zero, then this specific row should be filled in red.
Keep in mind that the datas of a row should be automatically sorted only when the value in column F is entered or when the enter key is hitted to add a new row.
View 9 Replies
View Related
May 13, 2009
I am trying to create custom sort list. It works below when I define range as A1:A79.
Sub SortWS2()
Dim SortOrder As Variant
Dim sheetsorder As Range
Dim Ndx As Long
Application. ScreenUpdating = False
With Worksheets("Sort Order").Range("A1:A79")
For Ndx = .Cells.Count To 1 Step -1
Worksheets(.Cells(Ndx).Value).Move before:=Worksheets(1)
Next Ndx
End With
Application.ScreenUpdating = True
End Sub
I have created a dynamic range called sheetsorder. If I revise my code it does not work.
Sub SortWS2()................
View 6 Replies
View Related
Aug 9, 2006
I have a worksheet populated with text and values from column A to BG, and from row1 to row550. Column B contains only the following text and values:
TKM SG
1
TKM Kulim
zero bin (internal)
0.33 bin (internal)
3
ESC
2
zero bin (AMA)
I need help for VBA code to sort the worksheet by this order of preference in col B as follow. Appreciate your help.
1
2
3
TKM SG
TKM Kulim
zero bin (AMA)
zero bin (internal)
0.33 bin (internal)
ESC
View 5 Replies
View Related
Feb 23, 2007
I am trying to do 2 things.
1) I want to make a drop down box with 3 differnent sort orders options in it.
- Sort by date
- Sort by Customer
- Sort by priority level
Once they select a view, it will then sort the rows to that view.
2) I want to do a filter box, so if I type a cutomers name, it will filter to only show the rows related ot that customer.
View 9 Replies
View Related
