Automatic Sort By Descending Order?

Mar 15, 2014

Don't know if macro is better, but I would like to try it with function

I have 2 sheets.

Sheet 1
Column A: Name
Column B: Points

Exemple:
Name Points
Mary 40
Johnny 20
Erick 60
Ralph 30

I want Sheet 2 to get data from Sheet 1 and sort by descending order automatically.

Then it should be

Sheet 2

Name Points
Erick 60
Mary 40
Ralph 30
Johnny 20

I don't want to do it manually every time I change some value; I want it to do automatically; so if I change, for example, Erick's points from 60 to 10 in Sheet 1, Erick should appear on the last place in Sheet 2, with his new value (10)

View 1 Replies


ADVERTISEMENT

Sort Command - Custom Order Or Sort Ascending Or Descending

Oct 8, 2006

Is it possible to make excel sort ascending or descending but from mid way through alphabet and then loop through the alphabet again. for example. If Cell A1 had "A" in, it would sort as normal.

Cell A1 = A
Cell A2 = B
Cell A3 = C
Cell A4 = D
Cell A5 = E

If Cell A1 had "C" in, it would sort from "C" through the alphabet and then loop to the start of the alphabet as shown below.

Cell A1 = C
Cell A2 = D
Cell A3 = E
Cell A4 = A
Cell A5 = B

View 4 Replies View Related

Automatically Sort In Descending Order

Jun 17, 2009

I'm using a table with columns from A to F and an unlimited number of rows. Note that there is a title at the top of each column.
-I'd like my datas in column F to be automatically sorted in descending order from top to bottom when I hit the enter key or when the number is entered in last column (column F).
-the the entire row of data needs to be sorted according to the sorting criteria of column F ( datas entered need to stay on the same row)
-the macro should validate that the number value entered in column F is the same as the number value entered in column A. (to make sure that there was no typing mistake)
-Result in column D must be the difference between the corresponding value in column B and C (B-C=D)
*The next couple of constraints are not absolutely required, i'd like to have them only if it's possible to add constraints with filling color:
-Whenever there is no value entered in column C on a specific row I'd like the entire row to be colored in yellow (fill color)
-IF a number is entered in column C, and that the result of B-C in column D is not equal to zero, I'd like this specific row to be filled in Red.
-when all the values are entered in a row from column A to F and that the result of B minus C is equal to Zero in column D, i'd like this specific row to be filled in a green color.
***in other words, the datas in each rows from column A to F will be entered on 2 occasions; on the first time, only the datas in column A,B and F will be entered (so basically after entering this set of values the row should be filled in yellow. the second time, the remaining values will be added to the rows, so at this time A,B,C,D,E and F will all be entered. when this is done there will be two options
1-the value in column D is equal to Zero then the entire row should be filled in green or
2-the value in column D is'nt equal to zero, then this specific row should be filled in red.

Keep in mind that the datas of a row should be automatically sorted only when the value in column F is entered or when the enter key is hitted to add a new row.

View 9 Replies View Related

VLookup Random Numbers - Sort Range In Descending Order And Return Relevant Value From Column

Aug 27, 2012

I have a column (B) of randomly generated numbers 1-14, and am using this formula range to sort in descending order and return the relevant value from column (c).

=VLOOKUP(LARGE(B3:B20,1),B3:C20,2,) to =VLOOKUP(LARGE(B3:B20,14),B3:C20,2,)

Works great, except when a number is duplicated, (E.G. 14,13,13,12,11,10,10,9,8 etc). It then returns the first value from(C) repeated, and not the value from the second and subsequent duplicated reference numbers.

View 3 Replies View Related

Vlookup In Descending Order

Feb 16, 2010

I'm running a workbook that has a list of all the runs for a day, and several daily driver sheets that automatically copy and order the drops using vlookup.

If you look at run 1 on the run listing you will see that holmfirth is the first drop and sandbach is the last drop.

This is also the case on page 1, as it should be.

However, on run 7 you will see that the first drop is Edinburgh and the last drop is Biggar.
The problem is that on the run listing form, we sort the run backwards so that it is loaded onto the trunk wagon backwards, then the load is tran-shipped (swapped) to the delivery wagon (dont ask) and the last drop on the trunk wagon (Biggar on the front end) becomes the first drop(on the back end) on the delivery wagon now in the correct delivery order. I need the daily sheet (page 7) to reflect the fact that Biggar is the first drop and Edinburgh is the last drop.

View 8 Replies View Related

Line Graph In Descending Order

Dec 8, 2009

How do i achieve the graph that is on the pdf with the data in the workbook i've attached. i cant work it out?

View 2 Replies View Related

Rank Table In Descending Order

Dec 15, 2009

I am looking to create a seperate league table based on percentages in two tables in descending order.

What i want is the not ready times in one ranked table and the call logging in another along with the persons name and percentage.

Im stumped about what is the simplest way to do this.

View 6 Replies View Related

Display Graph In Descending Order

May 11, 2007

I'm being asked to report on some survey findings containing 60 questions for my company. I've rated all 11 departments from 1st to 11th place for each question.

I want to be able to display a graph showing which departments came first, second and third and also where my department came - in the example of the first question, 7th.

What I'd like is a bar graph (ideally) without any values on the Y axis, the department name along the X axis and text labels at the top of each bar showing the position (ie. 1st, 2nd, 3rd and 7th).

The problem is that if I produce a graph from the following table:

Dept 1 - 1
Dept 2 - 2
Dept 3 - 3
My dept - 7

..then it produces a bar graph with bars in the opposite direction; ie the best department having the smallest bar.

I could just reverse the figures with 11 being the best instead of 1, but then the text labels on top of each bar are wrong. I know I could just label the correct figures by hand with text boxes, but I have 60 of these things to produce!

The closest I came was using the reverse values and having a custom text format to replace the numbers with the opposite text values ie. 11="1st";10="2nd"; but I couldn't get that to work

Any ideas? ....

View 9 Replies View Related

Lookup Function And Dates In Descending Order

Feb 10, 2010

i have tried: =VLOOKUP(TODAY()-7,A2:M2000,3) to return data that corresponds to a date 1 week ago. Unfortunatley, it does not work because my dates in the array are in descending order. The order cannot be changed... is there another function I can use to return the value I am looking for?

View 4 Replies View Related

Sorts Data By Column In Descending Order

Mar 26, 2012

I have a macro built that sorts my data by column in descending order depending on what column of information is selected from the drop down menu.

However I need the macro to sort column F in ascending order, and continue to sort the other colulmns in descending order when selected.

I can't get my macro to switch the sort from descending to ascending order for this one column. Looking to see if this is possible, and if so what macro formula I would use.

Here is what the macro i am currently using:

Sub ddSort_Click()
Dim iDdSortVal As Integer
Dim CurrSheet As String
Dim lFirstSectionRow As Long
Dim lLastSectionRow As Long
Dim strCol As String
Dim lRptHeaderRow As Long
Dim iRptMeasColumn As Integer

CurrSheet = ActiveSheet.Name

[Code] .......

View 1 Replies View Related

List Lowest 3 Variable Numbers In Descending Order

Oct 15, 2012

I have a list of numbers in cells A1:A10, these numbers change frequently. I would like to set up a formula to calculate the 3 lowest values from those numbers and list the three lowest values in cells J1:J3, with lowest value on J1 and the highest of the 3 values in J3.

I know I can use the small/large functions for this, but im not sure how to work it out to use just the 3 lowest values.

View 2 Replies View Related

Excel 2010 :: Sorting Of Dates - Ascending Or Descending Order

Oct 25, 2011

Find the sorting method of dates in excel 2010. I have dates in one column and i want to sort it, but I am not able to sort in ascending or descending order.

View 1 Replies View Related

Excel 2010 :: Sorting Numbers In Descending Order And Related To Each Other

Jul 1, 2013

I wanna sort these numbers in descending order and related to each others in excel 2010.

H
G
F
E
D
C
B
A

1383.99
1533.954
831.197
1533.954
1533.954
1383.99
700
1533.954
1

[Code] .........

About descending and related to each others, I mean for example : #700 in column A,B,C,D,E,F,G,H places in the same row and the same happen to #1533.954 and others. About the numbers that are The One ( like 549.894), I need to put them in its column and a new row with empty cells in its other columns. In the end i want a table like this:

H
G
F
E
D
C
B
A

1533.954

1533.954
1533.954

[Code] .........

View 5 Replies View Related

Rearrange Slices Of Pie Chart In Descending Order Without Sorting Data?

Aug 27, 2013

How to rearrange slices of pie chart in descending order without sorting the data?

View 1 Replies View Related

Using Sort Descending In VBA

Jan 5, 2010

I have some sheets which I would like to loop through and use sort descending on column S, would somebody help me out with the code to do so? I actually have the looping code already, I just need the sort descending bit.

View 5 Replies View Related

VBA Sort By Headers Descending

Oct 18, 2012

I have numerical headers in each column that I am trying to sort in descending order (Most to Least) . I have about 9500 columns to sort. i am just looking to move the columns in a sort order not actually sort the data in the columns. Here is a sample below.

From this:

HTMLSheet3  ABCDEFGHIJKLMN
113648576535355315071349485476152746320913334742372721211628213677181341133173311312012040
114169400000200021040544100412070185414260509119080360310070020100401200118103446282223023310120122413

to this:

HTMLSheet2  ABCDEFGHIJKLMN115271364134913338576535355315074854764744632092773724127212116281361318133401016733
113121209114420040000200010518401441004127025463600105091198000371200102010401008101100243446282223233132012

View 2 Replies View Related

Keeping Track Of Scores And Automatically Displays Names Of Players In Descending Order?

Feb 7, 2012

I'm fairly new to using excel and have been trying to create a simple spreadsheet that keeps track of scores and automatically displays the names of the players in descending order. Anyway I have gotten to the point of using hookup to match a value and return that players name. But when two players have the same score it will only return the first found value. I sort the number scores using a LARGE function and it works great. Then I use something like this =HLOOKUP(Y2,B27:K28,2,FALSE) to match that value with the players name. How to return the other players name when the scores are the same?

View 7 Replies View Related

Rank & Sort Table: Unique Numbers Sort Ascending, But The Non-unique Numbers Sort Descending

Oct 5, 2007

I have a list in rows where I have a ranking formula =COUNT($G$5:$G$81)-(RANK(G5,$G$5:$G$81)+ COUNTIF($G$5:G5,G5)-1)+1 When I sort the rank, ascending. All of the unique numbers sort ascending, but the non-unique numbers sort descending

ex) 1.751
2.52
3.753
418
417
416

View 5 Replies View Related

Disable Sort Ascending/Descending

Apr 13, 2006

Is it possible to allow Autofilter but disallow Sort Ascending/ Descending for an excel list in sheet? I have data set up as an Excel List (Excel 2003, with Autofilter turned on) so all formulas, formatting etc copy down when a new row of data is added, however if I just Protect worksheet and disallow Sorting, the List features don't work. I also tried putting the following in the Worksheet Activate event

ActiveSheet.Protect AllowSorting:=False

But this doesn't seem to disable the Sort option in the Autofilter, only the Data Sort function.

View 6 Replies View Related

Sort Latest Data Descending For Dates

Oct 4, 2011

Based on the table below, I need two tasks.

1. Sort out the data descending for dates
2. Have a way so that I can only retrieve the latest information.

Meaning if I ask for Pen, I should only get a value of X

Similarly for XYZ, I should only get a value of N

Date A B Types
Value 5 Oct Pen X 5 Oct Pencil Y 5 Oct Pencil H 4 Oct Glue
Q 1 Oct
Pen N 27 Sep
Glue T 2 Sep
XYZ N 2 Sep
XYZ X

View 4 Replies View Related

Toggle Sort Macro: Ascending/Descending

Jun 20, 2006

I would like to call a macro which would sort rows 4-23 from the highest to the lowest, or if it is already highest to lowest, then sort from lowest to highest. This is how I am doing the current sort(High-Low):-

Rows("4:23").Select
Selection.Sort Key1:= Range("E4"), Order1:=Range("e1").Value, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortTextAsNumbers
Range("A1").Select

View 4 Replies View Related

Sort Ascending/Descending Based On Criteria

Aug 2, 2006

I have an Overview worksheet that is pulling info from all other sheets in the workbook.

What I want to do is order that info in ascending order depending on the worksheet name.

So I want all the worksheet names that start with 'AB' say sorted in ascending order and all worksheets that start with 'BC' in ascending order.

Now this I have at present working by a macro I created which once the info is loaded onto the sheet I just selected the info and ordered it in ascending order. The thing is though the next time I enter this Overview sheet I might have an extra worksheet that starts with 'AB' and this will not be included in the order, I will have to adjust it everytime so I need a more automatic ordering process.

View 9 Replies View Related

Changing Values Of X-axis, And Descending Order Axis(x-axis)

Feb 8, 2009

Two questions:

1) How do make values on x-axis as words? E.g. apples, oranges, etc.

2) Is it possible to have the numbers on x-axis in descending order? If I can figure out 1), I can do this as well, but it would be nice to know if it is possible to have the numbers on x-axis in descending order.

View 8 Replies View Related

Sort Column D Acsending, Then Column C Descending

Mar 3, 2007

i want to sort column D acsending, then column C descending. i want to do this using VBA because i cant just format the sheet because another vba macro paste the sheet thier which would rid the formatting. (i would do it myself everytime but it is for someone to make it easier for them and not make mistakes..i searched, just found a sum formula post)

View 3 Replies View Related

Automatic Sort

Jul 27, 2006

I have a coloum of data which is currently updating of 4 digit numbers so something like col 1 would be 3423 col 2 would be 6543 and so on and so on. This list will be constantly growning is there a way to constantally sort these into numerical numbers lowest first? The data would be on coloum B the other sort range would be in coloum a.

View 3 Replies View Related

Automatic Sort - Possible?

May 24, 2007

Is this possible and if so, how do you do it?

For example, a team scores 10 points and moves up three places. Easy to do manually with sort but what about automatically?

View 9 Replies View Related

Automatic Sort After Filter ...

Mar 21, 2007

I'm trying to write one macro that filters a set of data based on 2 criteria and then automatically sorts the filtered data by date. The filter works fine but when I then try to write code that handles the automatic sort, I get the following message when I run the macro: "Run-Time Error 1004: the sort reference is not valid. Make sure that it's within the data you want to sort, and the first Sort By box isn't the same or blank."

I realize it would only take one or two more clicks to sort this data manully after the macro is run, but the lazy person in me is trying to eliminate this step. Does anybody have any suggestions as to why the sort is not working? I parsed basic sorting code, but it hasn't worked. The other part of this that is causing me trouble is that the number of filtered rows will vary, so I'm only needing to sort the visible range.

View 9 Replies View Related

Automatic Dynamic Sort

Jan 11, 2008

I have a spreadsheet that ranks the 500 components of the S&p 500 on an ongoing intraday basis. I would like to have the sheet sorted automatically as it is updated. I have very limited VB skills. Also, I heard there is a feature on excel 2007 that performs this function.

View 7 Replies View Related

How To Do Automatic Sort By Expiry Date

Jun 17, 2014

Column A = Product code
Column E = Expiry Date

How to make macro code automatic sort by expiry date (oldest to newest) then product code (A to Z)

After i put new item in product code & the expiry date...

I like to auto sort every time i put new item in next row.. and the result will be ber25 1/20/2015 will be on top of ber25 1/21/2015

Code
Description
Beginning
U/M
Expiry Date

Act10
Activo 10K
1
Bag
1/20/2015

[Code] ..........

View 1 Replies View Related

Sort - How Can I Order Then In B1:B60

Aug 2, 2007

i have A1:A60 filled with numbers. however, they are ordered incorrectly. how can i order then in B1:B60 in the following way?

1st cell
7th cell
13th cell
19th cell
25th cell
31st cell
37th cell
43rd cell
49th cell
55th cell
2nd cell
8th cell
14th cell
20th cell
26th cell
32nd cell
44th cell
50th cell
56th cell

etc.

until the 60th cell

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved