Macro That Will Navigate To A Tab For Defined Period Of Time

Feb 26, 2014

I want to assign a macro to a button that will unhide a tab for about 10 seconds, then rehide it and navigate to another tab. How do you do timed commands?

View 4 Replies


ADVERTISEMENT

Stop Macro Running After Specfied Time Period

Oct 17, 2007

I'm opening a workbook and then running the macro in the workbook. The problem is I would like to build a "timeout" feature if the macro is running too long (as some of the macro's this will run can take days to complete) but I don't know how to run the macro asynchronously. Also I need to know if i can get it to run asynchronous is there an event that will tell me when the process is finished. The calling application of the macro is written in VB6 and opening excel workbooks to run the macros out of. also the "timeout" feature must be done from the VB6 application it cannot be edited into the the workbooks containing the macro.

View 6 Replies View Related

Sumifs Formula To Add Up Weights Between A Defined Period?

Dec 11, 2013

I'm exporting data from an access database into an Excel document and want to use the Sumifs formula to add up weights between a defined period (we have to show tonnages on a weekly basis).

The data and calculations are on a separate worksheets. The data looks like this:

[URL]

I'm trying to sum the data in column E based on the date range in column A and my formula is

=SUMIFS('Site CR'!E$5:E$5000,'Site CR'!A$5:A$5000,">01/11/2013",'Site CR'!A$5:A$5000,A5)

For some reason, my formula always returns 0 and I can't see why.

[URL]

View 4 Replies View Related

Application-defined Or Object-defined Error :: Add Named Range At Run-time

Oct 4, 2006

Trying to add a named range at run-time

Here's what I have so far ...

View 9 Replies View Related

Automatically Change Cell (With Time) Color After Time Period Has Passed

May 23, 2008

I have a protected worksheet. Users wish to be able to track changes in the input cells. The suggested approach for this is to temporarily disable sheet protection and allow them to change the font color, then protect afterwards. What I would like to do is:

i) check whether they are in an input cell
ii) if so, then prompt the user with the 'Font Color' dialog box
iii) apply the font color selected to the input cell

I'm struggling to find the dialog box I need. I can launch the one to change the interior color, no problem (Application.Dialogs(xlDialogPatterns).Show). But that's no use to me, I just want a color palette that specifically relates to the Font Color

View 4 Replies View Related

Count Number Of Full Time Periods Within A Time Period

Nov 18, 2008

I have thousands of timestamps that have a start & end date and time in 2 separate columns. (one named start and one named end...)

I also have numerous set time periods that i'm interested in.. (about a dozen or so)

for example 01/01/2008 - 05/01/2008, 07:30:00 - 10:00:00

What i need is to be able to count the number of times the full time period i am interested (07:30:00 - 10:00:00) in falls in between the thousands of start and end timestamps i have. The time periods must also fall within the date range specifed.

So if my timestamps were
Start: 01/01/2008 06:30:00 & End: 02/01/2008 11:00:00, based on the set time period above, there would be a count of 2

and if my timestamps were
Start: 01/01/2008 07:05:00 & End: 02/01/2008 09:00:00 there would be a count of zero as there is not a full uninterupted timeperiod 07:00:00 - 10:00:00 between these timestamps.

and if my timestamps were:
Start 01/01/2007 07:00:00 & End 02/01/2007 10:00:00 the count would be zer as this is a year early!

View 9 Replies View Related

Time Related Data Applied Over Time Period

Jul 10, 2014

I want to return a value based on once off time related data which is captured at 4 time periods throughout a day. I have another set of data which does not line up with this data but I want it to return the value closest earliest value.

Given this data:
27-6-14 3:00 12
27-6-14 7:00 18
27-6-14 11:00 19

If I have a time like 27-6-14 5:00 I want to return a value of 12 (Previous time). How would this be possible?

View 5 Replies View Related

Macro To Navigate Around A Worksheet

Jan 7, 2010

I needed to create even the simplest of VB Code and i'm struggling to get a macro to navigate around a worksheet.

Here's what I have so far...

Sub Macro2()
Selection.End(xlDown).Select
Selection.End(xlDown).Select
Selection.End(xlDown).Select
Selection.End(xlDown).Select
Selection.ClearContents
Selection.End(xlToRight).Select
Selection.Cut
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
(At this point, I want the cell 2 above the last selected to be highlighted)
ActiveSheet.Paste
End Sub

View 9 Replies View Related

Macro To Navigate Through Spreadsheet

May 21, 2006

when the user selects any cell(s), then hits the command button, I want the code to move the cell(s) selection to the far left i.e. Column "A". I've managed this is a roundabout way, but I'm trying to make a far more elegant version.

Set C = Selection
With C
While Not C.Previous Is Nothing
MsgBox C
Set C = C.Previous
Wend
End With

So C is the selection made my the user, for this example they are just selecting one cell. The MsgBox proves to me the code to moving the cell selection to the left, but the While condition falls as the Previous test condition fails and bombs the macro. I cannot think of another way of doing this. Is there a method that returns X and Y co-ordinates as numbers?

View 2 Replies View Related

How To Navigate In Internet Explorer With Macro

Nov 14, 2013

Every day I gotta enter information in my work's website (intranet), however I dont know that much about manipulate with VBA the Internet Explorer application, for example once I enter information in the website, I gotta enter an ID after that I gotta select the date, then I gotta give some clicks in some checkboxes, then I copy some information from excel and enter that information in the navigator, and finally click on save. The thing is that I do not have access to that website in my home so is impossible for me to provide you with the link... what kind of codes do I need to do it, or where can I find a manual where I can learn to manipulate another application like the Internet explorer with VBA.

View 4 Replies View Related

Sort Macro: Application-defined Or Object-defined Error

Aug 29, 2006

I get a run time error 1004 when I run this sort.

ActiveSheet. Range("A1:AC277").Sort Key1:=ActiveSheet.Range("G2"), Order1:=xlAscending, Key2:= _
ActiveSheet.Range("E2"), Order2:=xlAscending, header:=xlYes, OrderCustom:=1, _
MatchCase:=False, Orientation:=xlTopToBottom, DataOption1:=xlSortNormal, _
DataOption2:=xlSortNormal

View 9 Replies View Related

Run Time Error 1004 Application-defined Or Object-defined Error

Mar 5, 2013

I have a relatively complex report that I work with and a worksheet is no longer required. I have deleted the worksheet and reference to it hwoever when running the macro to pull all the data, it gets to the summary of all the data and i get the Run Time Error 1004 Application-defined or object-defined error pop up. ON reviewing it, it is on this line ActiveCell.Offset(0, 0).Range("a1:a" & Range_Height).Select of the below code...

VB:
Sub GetRangeName()
Sheets("TOTAL").Select

[Code].....

use code tags around code. Posting code without them makes your code hard to read and difficult to be copied for testing. Highlight your code and click the # at the top of your post window.

View 1 Replies View Related

Run Time Error 1004 (application-defined Or Object-defined Error)..

Apr 26, 2009

I have a simple function below to put in different forumlas in different cells to get stock quotes. When I run this I get runtime error 1004 application-defined or object-defined error. The first formula goes through but vba chokes on the next formula: ActiveCell.Offset(I - 1, 4).Formula = username

View 10 Replies View Related

Run-time Error '1004' Application-defined Or Object-defined Error

Aug 12, 2009

Run-time error '1004' Application-defined or object-defined error. I am trying to use this

View 2 Replies View Related

Run Time Error 1004 - Application-Defined Or Object Defined Error

Oct 4, 2009

I was trying to use the below code

View 4 Replies View Related

Run Time Error 1004 (Application Defined Or Object Defined Error)

Dec 4, 2009

I keep getting a Run Time Error 1004 (Application Defined or Object Defined Error) when my sub reaches this line:

ActiveCell.Formula = "=SUM(D222,D224,D226,D227,D229,...)"

In the actual line of code the "..." above is another 20-30 or so cells in column "D". Probably no more than 150-170 characters in the line.

If I remove half of the cell range names it works, but I need all of the cell ranges for the equation.

View 9 Replies View Related

How To Get The (average Or Sum) In A Limited Period Of Time

Jan 22, 2009

This code help me in typing the date and time in any cell of column (B) automatically just in case I enter somthing in any adjacent cell of column (A)

View 6 Replies View Related

Converting Time Period In Hours

Mar 2, 2006

How do I convert 7.30 hours into 7.21 (ie 7 hours 21min.) Note I do not wish
to use the standard hour:minute formatting.

View 11 Replies View Related

Calculating Time Across A 24 Hour Period

Nov 6, 2007

Calculate certain time increments for various work-shifts. I have a start time,finish time and increments of time across the spectrum of 24 hours. There are also multiple start time across the 24 hour period with some start times begining on one day and ending on the next day.

Example

In B5 Startime is 22:00
In C5 Finishtime is 06:30

In I3 increment begins at 00:00
In I4 increment ends at 00:30

The employee working the shift from 22:00 - 06:30 would fall into the time increment of 00:00 - 00:30 where another employee working a different shift (08:30 - 17:00) would not. I'm looking for a formula that would return a 1 in a cell if the employee fell into the 00:00 - 00:30 time increment and a 0 in a cell in the employee did not fall into the time increment.

View 11 Replies View Related

Determine Formula To Know Period Time?

Oct 9, 2011

I am trying to determine a formula to know a period time for example i started to test a unit at 10:20 am of 10/02/2011 and i would like to add 52 hours of test and i would like to know when and at what time will finish the test?

View 3 Replies View Related

Work Out The Value Of Cars Over A Period Of Time

Apr 9, 2008

I have a project where I have to work out the value of cars over a period of time.

The cars depreciate at 36.9% per year over a 5 year period and I can't work out for the life of me how to create a formula in excel that give me the values at the end of each year.

Each car costs 10000 and I need to know what the value of each car is at the end of each year

View 9 Replies View Related

Graphing - Selecting Specified Time Period

Feb 13, 2010

I have sheet that is populated with data daily. I wish to create graphs from information contained within a table in this sheet where i can select the start date and end date of the graph possibly from a drop down menu. I will be creating multiple graphs and wish for them all to change when i select the time period.

View 9 Replies View Related

Time Trial Period In My Spreadsheet

Jul 27, 2006

I've searched a few of the posts here about freebies in terms of adding a trial period to your spreadsheet. I'm just starting to get into VBA programming (beginnner), but I was wondering if anyone here could suggest actual programs or add-ins that I could buy that would allow me to create a trial version of my spreadsheet? either by allowing the user to use it for a few days or to allow the user to use it for a specifed # of times.

I'm willing to pay for this, but I can't afford those expensive Licensing/Copy protection programs....I need a simple solution in between $20 and $60....

View 9 Replies View Related

Highlighting Cells When A Period Of Time Has Passed?

Aug 20, 2014

If C2 = 21/06/14

I need F2 to highlight when 60 days have passed from the date entered in C2.

Would this work if placed in F2 =C2+60<TODAY()

No access to excel at the minute to try it

View 1 Replies View Related

Automatically Close UserForm After Time Period

Feb 15, 2010

I have the following code in a simple userform containing only a label:


Private Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)

Private Sub UserForm_Activate()
DoEvents
Sleep 4000
Unload Me
End Sub

When I invoke this as a single macro in a blank workbook and immediately change focus by pressing ALT+TAB to enter NotePad the userform is shown and exits normally after 4 seconds.

However, when I issue this code from within a larger macro, and hit ALT+TAB to Notepad, the excel application hangs on the displayed userform until I click back into Excel.

If required, I can happily send you the code as an attachment.

View 9 Replies View Related

Pivot Tables To Find Max Value In Time Period

Oct 8, 2006

I have a in field column M of my table that gives the week number of various dates within the table.

I would like to find the high value reached during each week based on the Highs which are located in column P, the highs consist if workdays during each week number.

I would like this to appear as a new calculated field entitled "Week High", I am assuming I need to input a custom formula to do this. I also want to create calculated fields for the the high reached during each year, the year is in column L

View 5 Replies View Related

Chart A Graph Of Jobs Over A Period Of Time

Jun 17, 2007

I have an Access database, with a table of jobs processed.

One column for Job ID (Unique), Date it was processed, By Who it was processed and Comments ascoiated.

I need to chart a graph of Jobs over a period of time. How many jobs done per date. In excel preferebly, I have programs like Database Plus for excel. And I am familiar with VBA. I can't figure out how to uniquely sort how many jobs for each date. As there are numerous job entries for on the same dates. I think it can be done with an SQL query or sorting it with VBA somehow. Any help will be greatly appreciated. Or can anyone suggest an application designed for charting with Access databases in Excel?

View 6 Replies View Related

Loop And Match Considering Location And Period Of Date And Time?

Jun 27, 2013

compare two lists of data in order to identify the possible matches considering date&time and the location stored in different columns as shown in the example file attached. The range of date and time for the comparison is one hour, but it can be changed...

View 4 Replies View Related

Calculating Data Within Past 24 Hour Time Period

Jun 7, 2014

I am a flight instructor and legally we cannot work more than 8 hours in any consecutive 24 hour period. I'm trying to create a spreadsheet that will calculate the totals from that 24 hour period for me.

Right now I have something that sort of works, but not the way I would like it. I have a column for "time" that has the date and ending time of the flight and I am using that as if the total flight occurred at one moment (the ending time).

So, for instance let's say I did these flights

1: 8AM-10AM (2 hours, clocked at 10AM)
2: 11AM - 2 PM (2 hours, clocked at 2PM)
3: 7AM-9AM the following day (2 hours, clocked at 9AM)

If I have my formula calculate the time for 9AM the following day (totaling the past 24 hours) the first flight won't be included in the calculation since the hours from that flight is only imputed at 10AM. The formula would read 4 hours rather than the (actual) 5 hours.

Here is my workbook : 8 hour calculator sample.xlsx

Here are the formulas I am using

The time is formulated at date and time, with time being the ending flight time

The start time for the calculation is

[Code]....

end time is just =NOW()

Total calculation is

[Code] .....

All I'm trying to do is use the totals under "flight start" and "flight end" instead of the end flight time I had to put in under the date column.

View 9 Replies View Related

Automatically Close If A User Is Inactive For A Period Of Time.

Nov 13, 2008

We have one shared excel workbook and it is used by many people (more than 20 simultaneously), is there any way to auto save & close the workbook (session) if a user is inactive for specified time.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved