making a Macro to do the following:
The user selects a product from a drop down I need the macro to lookup the selected student in the dropdown in a table on another worksheet. Once found cut the whole row this that student in and paste it in another worksheet.
I am trying to write a simple macro to copy a drop down list I created in cell O2 and then paste in the same sheet. I need it to paste starting in cell A2 and then move to A4 and so on for every even row cell through A9778. I would also like it to keep a border around the cell. I can't find direction on how to tell it every even cell or defining x and then doing x + 1...
View 3 Replies View RelatedI would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I am trying to pull data from more than one drop down but don't the same data to show if already use, example as follow:
First drop down Contains:- Pants
Shirts
Hats
Shoes
Dresses
if I chose Hats it should not show up in the second drop down
second drop down Contains:- Pants
Shirts
Shoes
Dresses
Is this done in data validation or combo Box? if so how?
I'm trying to write macro for hiding columns based on a drop down answer. The drop down would be in cell B7 on Sheet 1. The colums affected would be in each worksheet in the workbook. The data validation would have a drop down selection choice of 1 through 16. The columns affected range would be H through W. For example, in the drop down if 1 was selected, only column H would show. If two, H and I would show...etc. This macro should affect all worksheets in the workbook EXCEPT sheet 1.
View 2 Replies View RelatedI have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
I have a situation where our portal allows user to download excel file. We have tried to avoid Macros in the excel since some users may have macros disabled or security settings do not allow to download the excel document with macro. The excel is formatted particular way and there are multiple columns where the users have to select values from the lists. When the user manually enters invalid entry in the column, it shows error message and prevent user to enter incorrect value.
But when the user paste values then there is no validation occurs, thus it is possible for user to submit the incorrect value back to the portal. We have much complex logic when the user uploads the filled excel file based on the values selected in the dropdowns.
My Questions are,
1. Can we force the validation on paste without using macro?
2. If it is only possible with macro, then what should be done for those cases when the users have macros disabled.
There are many columns, many list values for each column so it gets difficult to validate the entered values on the submission using program since we have many other validations in which case we are refusing the user to submit the excel. So for each not valid entry if we give user error message then that's not good idea.
I have a drop down box in my excel sheet to show what type of product I am dealing with (emulsion, fatty acid, caustic, etc.) and I have it linking to the cell right behind it (C14).
Is there any way to copy/paste the drop down box into the cells below (C15, C16, etc.) and have it link to them without going in and manually formatting the control? I have already tried removing the $ that originally populates when first linking the cell.
Example:
from cell b12 to i5, then
From cell d12 to j5 then
From cell d13 to k5 then
From cell d14 to l5 then
[Code]...
Each time back to cell b, i have to add 3 cells, like from b15 to b18.
I would like to automate this process, but i did not know how to make macro increment by 3. Etc. I have hundreds of numbers to deal with.
Is it possible to create a Macro where I minimize the work of copying the data from one tab and pasting it into another tab, in a specific cell..?
Summary:
I have a pivot which contains data like; Location, PO, Date, NCM, Inv & Total. There are different Locations such as AHM, BHU, BLR, CHA, and so on; and there are different PO, Date, Inv, NCM and the Total Amt. Each Location has 2 types; 1st AHM-1 & AHM-2, and so on.
My Requirement is;
I want the data to be pasted automatically in the respective tabs, referring the pivot.
Eg: the Pivot has the below details;
Location
PO
Date
NCM
Inv
Total
AHM
1234567890
15.04.2013
2000000420
13I0MH2I1001
3607.76
[Code] ..........
The Location AHM has two rows which is referred an AHM-1 & AHM-2.
In AHM-1 & AHM -2 The PO should be pasted in cell B27, Date in cell C27, Inv in cell E27, NCM in cell E31, Price in cell F43 and Descpn in cell C41 with that particular month. In short, where the cells are highlighted in color Green.
The sample file is updated in the below link. [URL] ..........
I have a workbook that has a master data sheet which is used daily to import data. I also have worksheets named: 1, 2, 3, etc. based on the day of the month.
I have been manually pasted the master data for a particular day onto that corresponding numbered worksheet.
I was thinking of taking the date and and separating it using the deliminated feature then somehow looking at the day of the month and tell it to paste to that same worksheet number.
Template is created where the users copy/paste the data from other file. Data validation has been performed with the following steps:
1. Macro inserts the vlookup formula into column A, which isused for validating data that is entered by user from column B to E.
2. If the data is incorrect the N/A will be displayed in column A and invalid data will behighlighted in red color in column B.
3. This validation goes through the loop and after the loop is finished the pop message will be displayed and macro should stop so the user can correct the data.
4. After the user correct the data, the macro needs to run again to make sure there is no further errors. If there are no errors, thehighlighted cells should be cleared out of color and pop.
Here is the code that runs by command button:
Private Sub CommandButton1_Click()
Call FindNA
End Sub
Sub FindNA()
Dim ResultRange As Range
Dim ResultCell As Range
Dim iRow As Integer
[Code] ......
I want to create a macro to paste some data into the next empty cell. Below is sort of what I need but this show it going to a particular cell, I need it to got to next open cell in the range from say BY3. So next macro run it would copy and paste the data from T3:T9 (always this range) to BZ3 then CA3, CB3 and so on.
[[Sub CopyData()]
'
' CopyData Macro
' Copy The Data To Build Graph
'
[Code]....
On Sheet1 I want a macro that looks for the last used cell in Column D and then put tomorrow's date into column A, 2 cells below where the last used data was found in col D.
I then want to copy the entire contents of sheet2 and paste it into the cell below where we enter tomorrow's date.
I Need to write a macro for the following example.
In sheet 1.
It has data as below
HTML Code:
Sl.no Name Task week hoursworked
1 SAM Teaching 1 2
2SAM Teaching 1 2
3 SAM Teaching 1 3
4 SAM Teaching 1 1
5 SAM Teaching 1 5
I want to consolidate the data as like below and to paste it in sheet2.
HTML Code:
Sl.no Name Task week hoursworked
1 SAM Teaching 1 13
If the Name, Task and Week columns are same then macro should do sum the hours and make it into a single line as mentioned above.
I need a Macro that can look in column A to find the date, and then drop down one row and move to column B and then copy the data in that cell to column C back up one row.
I've attached the workbook so you'll know what i'm talking about. I need the green cells to be moved to the blue cells all the way down.
COLUMN A =Date
COLUMN B =Empty Row
COLUMN C=Copy Details
COLUMN D=Paste Details
I am looking for a macro that will allow me to the following:
- search column F for "word1", "word2", "word3", and/or "word4"
- then match the search to row on column C data
- then copy/paste row or rows of matched data unto "Sort" worksheet but only data from columns A, B, C, and F
- also, when copying, copy the row above
I'll need a macro that detects all data have been recorded starting row C3 (see photo) and then goes to spreadsheet 2 (plan2) and select the first empty row starting in C3 (see photo) and paste the data.
Plan1:
Plan2:
The number of rows in my spreadsheet will change. I am creating a Macro to insert a column and enter a formula in the second cell of the new column. I need to copy that formula down through that column to the last row, but don't know how many rows there might be that day.
View 2 Replies View RelatedI have set of data in sheet1 i want to copy and paste in sheet2 with same row height.
View 2 Replies View RelatedI have 2 reference cells with the date range to look for in C1 and D2.
G2 through IV2 have dates that run across.
I would like for the macro to look for the start and end dates in C1 & D2 and paste the new data as values from A1:B20 into those particular columns of dates within the range.
ABCD1head count23start7/1/092vac%5%end7/15/093iap%3%4misc%3%5off%21%6% ot0%7off%21%8% ot0%9rpr wk rt1.510inst wk rt5.0211go back %5%12nw Mvr %3%13fall out %10%14jep/incomplete %16%15lines in service116% esc3%17% change610%18churn rate60.994%19report rate0.297%20% of market2218%
I have this macro below written. It isn't working for me and I am trying to figure out how to write it. Basically, the macro is supposed to go to the test.xls workbook and then look at names in row 4, from there it will take each name and search for it on the all csrs new.xls workbook and then move over to the right 5 times and copy data and paste 1 down from the name on the test.xls workbook. One workbook has the names going to the right and the other workbook has the names going down....
View 9 Replies View Relateddear friends when i am enter data manually this macro work fine.but same data I'm copy & paste macro not working.pls help me..
Sub REQD_KILOS()
Dim c As Range, MyString As String
Application.ScreenUpdating = False
For Each c In Range("J3", Range("J" & Rows.Count).End(xlUp))
MyString = Cells(c.Row, 6) & Cells(c.Row, 7) & Cells(c.Row, 8)
Select Case UCase(MyString)
Case "5000MSSP40/2"
c.Offset.Offset(, 1).FormulaR1C1 = "=IF(RC[-1]="""","""",RC[-1]*0.145)"
Case "4000MSSP40/2"
c.Offset.Offset(, 1).FormulaR1C1 = "=IF(RC[-1]="""","""",RC[-1]*0.115)"
Case "2000MSSP40/2"
End Select
Next c
Application.ScreenUpdating = True
End Sub
The source data is collected using drop-down menus. In moving the data from one workbook to another, the drop-down lists are carried over into the destination cells. I have used both: paste special "values" and paste special "valuesandnumber formats". The code in the else statement produces the same result as the 2 step process above it.
View 1 Replies View RelatedI have a workbook with 4 sheets relating to areas and a summary sheet and introduction.
On the introduction sheet I have a dropdown which lists all the available products my company make.
What I want is to be able to select the product from the dropdown and then click a button which will then copy and paste the headers and any rows which relate to the selected product from each of the area sheets and paste it all onto the summary sheet.
On the attached worksheet I am selecting items from the "Description" dropdown list on the Invoice worksheet. I then would like to find a way to automatically copy and paste the "Item #" and "Unit Price" found associated with the selected item on the database worksheet "Products".
i.e. I select the product and the spreadsheet fills in the rest of the required info.
The code below adds the date to D:D once the user enters data in B:B and then adds the time when the user selects from a dropdown in C:C. When they have finished the task they enter anything into F:F and then it enters the end time in G:G.
This works well except for one flaw and one modification that I can't get to work. I have found that people retrospectively change the activity in C:C which causes the start time to change. I would like to avoid this hapenning if possible by putting some code in to stop this. Also I would like the times to be related to the push of a button on the sheet and therefore need different code.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("B2:B900")) Is Nothing Then
With Target(1, 3)
.Value = Date
[Code] ......
I have two sheets that I am using. sheet 2 has a list of experiments in column C with information regarding the experiment in columns F - J. On sheet 1 I have a dropdown box with a list of all the experiments. When I select an experiment from the dropdown box I would like to populate columns K - O on sheet 1 with the information from columns F - J for the selected experiment on sheet 2.
View 9 Replies View RelatedI have a report that runs, and it shows users that are in different groups. Within each group are primary users, and sometimes secondary users. Attached is a spreadsheet showing an example of the report in "A7:A52"
What I want to do is have a macro scan column A, and if a group is found, create what I have made in the rest of the spreadsheet (CD6 and below). I manually filled in the data for group 1, and would like it to continue off to the right in the same format.
There are some areas that dont have groups, such as there might be group 1, group 2, and then nothing till group 10 (as shown in the example)