Macro Detects Data And Paste Into Another Spreadsheet?
Oct 11, 2013
I'll need a macro that detects all data have been recorded starting row C3 (see photo) and then goes to spreadsheet 2 (plan2) and select the first empty row starting in C3 (see photo) and paste the data.
Plan1:
Plan2:
View 3 Replies
ADVERTISEMENT
Oct 1, 2012
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
View 2 Replies
View Related
Jan 3, 2013
I have a "txtQuoteNo" box used in my userform "FrmQuotation", and this is recorded in column A of my Central Data spreadsheet (with a fair slug of other data from the userform).
I can currently recall the data into the userform from the spreadsheet using the QuoteNo, but when I need to resubmit it back to the spreadsheet, I can't see why the following code posts this new data onto a new line rather than the blank cells in the corresponding row of txtQuoteNo and column A (if you see what I mean...)
Set wb = Workbooks.Open("M:Central Taxi Data.xlsx")
With Sheets("Data").Range("A:A")
Set cell = .Find(myVal, LookIn:=xlValues)
rw = cell.Row
End With
RowCount = Worksheets("Data").Range("A" & rw).CurrentRegion.Rows.Count
[Code] .......
View 3 Replies
View Related
Jul 9, 2013
I haven't work with Excel for a while. I have a "main" file, with info such as name, address, phone #, etc. and another file with additional info for each person required to, in the end, do a merge. How do i combine the 2 files so that the secondary info plugs in next to the last column in the same order as the "main" file.
View 1 Replies
View Related
Dec 8, 2012
I have a spreadsheet witht the following design:
Column A = Date
Column B = Value 1
Column C = Value 2
I have a folder with excel files named by date (e.g. 081212 = 8th December 12). Within each of those files is Value 1 and Value 2. They are always in the same cell (B6= Value 1, B16= Value 2).
How can i create a macro/script where the Values in Column B and Column C in my spreadsheet are automatically updated where there is a Date in Column A but no values in Column B or C?
In other words, i need the script to read the date in Column A and if Column B and Column C are blank, then it needs to find the corresponding date excel file and copy Value 1 and Value 2 into the cells in my spreadsheet.
View 3 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Sep 25, 2013
On sheet1 I have 6 products in E15:E20 and their prices in AB15:AB20.
I have created userform1:
Step 1. When the form shows I'd like the products in E15:E20 to show under "Product" and prices in AB15:AB20 to show under "Price".
Step 2. The user needs to be able to add a price value in either the "-Disc" and/or "+Fees" fields, from this the adjusted price should show in "New Price"
Step 3. When the user hits "Add", the value under "New Price" needs to show up in AB15:AB20. To complicated this last step (maybe) in cells AB15:AB20 is:
Code:
=IF($R15=0,"",IF(ISERROR(SUM(INDEX(Data!$V$3:$Z$114,MATCH($E15,Data!$U$3:$U$114,0),
MATCH($B15,Data!$V$1:$Z$1,0))))+
SUM(INDEX(Data!$AO$2:$AS$7,MATCH($T15,Data!$AN$2:$AN$7,0),MATCH($B15,Data!$AO$1:$AS$1,0))),"",
SUM(INDEX(Data!$V$3:$Z$114,MATCH($E15,Data!$U$3:$U$114,0),MATCH($B15,Data!$V$1:$Z$1,0))))+
SUM(INDEX(Data!$AO$2:$AS$7,MATCH($T15,Data!$AN$2:$AN$7,0),MATCH($B15,Data!$AO$1:$AS$1,0))))
So whatever value is entered into "-Dsc" or "+Fees" needs to be added and/or subtracted from this formula.
I don't know much about vba, the best I could come up with is:
Code:
Private Sub cmdclose1_Click()
Unload Me
End Sub
Private Sub cmdadd1_Click()
[Code]......
View 5 Replies
View Related
Feb 12, 2014
I am new to VB Macro creation and I am creating VB Macro which will:
1. Sort data in Columns within an active spreadsheet
2. Create new Worksheets
3. Delete Values in rows based on value in Column.
I have listed my "Step by Step" instructions in the tblTest Excel file on attachment. The instructions are clear and straight to the point.
Below are some VB Macros I was experimenting with but it is not complete.
Sub Sort_Ascending_With_Header()
'Sorts a worksheet in ascending order and assumes there are headers on the data
Range("A1:DZ20000").Sort _
[Code].....
View 2 Replies
View Related
May 18, 2014
Trying to add a macro to generate an approval email with certain data from the spreadsheet within the body of the email. I have the following in place currently to deploy the email:
Sub Sendemail()
Dim Email_Subject, Email_Send_To, _
Email_Cc, Email_Body As String
Dim Mail_Object, Mail_Single As Variant
Email_Subject = "New Account Approval"
[Code] ....
What do I need to add the following cell values into the body of the email, All Sheet 1?
B6
B4
B8
F14
E16 : F16
E17 : F17
A25 : B25
A26 : B26
A27 : B27
Is there something simple I can insert to make this work?
View 2 Replies
View Related
May 17, 2006
I have a folder full of uniformed web pages ( name and design) and I was wondering if it's possible to create a macro that will open up each page, copy specific data from each page, and paste it into an Excel 2002 spreadsheet. Unfortunately, my skills in VBA are very limited at best and I'm not sure if this is doable or is it something I'll have to go into each page and copy the data.
View 3 Replies
View Related
Dec 6, 2006
I have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem
...
.Fields.Item(1).value = activecell 'activecell value = "Joseph"
If Not isempty(activecell.offset(0,1)) Then
.Fields.Item(2).value = activecell.offset(0,1).value
Else
.Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works
End If
...
End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty
' or
.Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
View 2 Replies
View Related
Jun 20, 2013
Basically I have manually generated word documents based on a spreadsheet. Now, I need to countercheck the contents of the word documents with another spreadsheet i.e. make sure the courses in the word document for a particular student is same as that reflected on the spread sheet. Is it possible to write a macro for this? I'm a beginner and I'm waaay out of my depth. I have attached sample documents and spreadsheets.
The link to the documents are as follows: Macro to check data from Word documents against an excel spread sheet
View 2 Replies
View Related
Mar 28, 2014
I have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
View 9 Replies
View Related
Oct 18, 2013
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
View 6 Replies
View Related
Aug 11, 2013
I have two spreadsheets, one gives me the beginning and end of civil twilight as a measure of day vs. night. The spreadsheet has Date/Time in the first column, and the value 45 in the 2nd column when it is night. The second spreadsheet has also 2 columns with date/time and body temperatures of a squirrel. I want to get basic statistics (mean and standard deviation) of the squirrel's nocturnal body temperature, that is for times when it is night (value 45). The tricky part is that Date/Time of both spreadsheets are different. The procedure has to recognize that the date/time of body temperature lies between the beginning and end of the value 45 blocks of the first spreadsheet.
files: twilight sheet squirrel temperature
View 6 Replies
View Related
Jun 10, 2014
Example:
from cell b12 to i5, then
From cell d12 to j5 then
From cell d13 to k5 then
From cell d14 to l5 then
[Code]...
Each time back to cell b, i have to add 3 cells, like from b15 to b18.
I would like to automate this process, but i did not know how to make macro increment by 3. Etc. I have hundreds of numbers to deal with.
View 1 Replies
View Related
Feb 7, 2014
making a Macro to do the following:
The user selects a product from a drop down I need the macro to lookup the selected student in the dropdown in a table on another worksheet. Once found cut the whole row this that student in and paste it in another worksheet.
View 14 Replies
View Related
Aug 22, 2013
Is it possible to create a Macro where I minimize the work of copying the data from one tab and pasting it into another tab, in a specific cell..?
Summary:
I have a pivot which contains data like; Location, PO, Date, NCM, Inv & Total. There are different Locations such as AHM, BHU, BLR, CHA, and so on; and there are different PO, Date, Inv, NCM and the Total Amt. Each Location has 2 types; 1st AHM-1 & AHM-2, and so on.
My Requirement is;
I want the data to be pasted automatically in the respective tabs, referring the pivot.
Eg: the Pivot has the below details;
Location
PO
Date
NCM
Inv
Total
AHM
1234567890
15.04.2013
2000000420
13I0MH2I1001
3607.76
[Code] ..........
The Location AHM has two rows which is referred an AHM-1 & AHM-2.
In AHM-1 & AHM -2 The PO should be pasted in cell B27, Date in cell C27, Inv in cell E27, NCM in cell E31, Price in cell F43 and Descpn in cell C41 with that particular month. In short, where the cells are highlighted in color Green.
The sample file is updated in the below link. [URL] ..........
View 1 Replies
View Related
Aug 15, 2008
I have a workbook that has a master data sheet which is used daily to import data. I also have worksheets named: 1, 2, 3, etc. based on the day of the month.
I have been manually pasted the master data for a particular day onto that corresponding numbered worksheet.
I was thinking of taking the date and and separating it using the deliminated feature then somehow looking at the day of the month and tell it to paste to that same worksheet number.
View 9 Replies
View Related
Feb 6, 2009
Often I need to add data from one spreadsheet to the appropriate places on another spreadsheet. For example:
Sheet A has 10,000 records with these fields: id#, name, address, place of employment.
Sheet B has 5,000 records these fields: id#, GPA, college major, type of degree.
Some of the records in B contain information for the same id#'s as sheet A. I want to add this information together so that a Sheet C will have these fields: id#, name, address, place of employment, GPA, college major, type of degree.
View 3 Replies
View Related
Jul 28, 2009
I want to be able to open the Excel spreadsheet, and have some easy way to post formulas into that document. I was thinking a Macro would work, but I cannot seem to find a way. Columns A through V contain the data that is exported from the payroll system. I want to find a way to paste my formulas into W2:AH200. The formulas will always be the same.
I'd like the user to be able to:
1. Export the payroll information to Excel and open the document.
2. Run a macro (or some similar action) to place the formulas in W2:AH200 into the spreadsheet.
3. Input data into AH2, AH3, AH4, and AH5.
A sample document is attached. Columns A-V are what get exported by the payroll system, and W-AH are my formulas I've added to this sample (and what I want to be able to easily add to new spreadsheets).
View 2 Replies
View Related
Sep 26, 2013
Template is created where the users copy/paste the data from other file. Data validation has been performed with the following steps:
1. Macro inserts the vlookup formula into column A, which isused for validating data that is entered by user from column B to E.
2. If the data is incorrect the N/A will be displayed in column A and invalid data will behighlighted in red color in column B.
3. This validation goes through the loop and after the loop is finished the pop message will be displayed and macro should stop so the user can correct the data.
4. After the user correct the data, the macro needs to run again to make sure there is no further errors. If there are no errors, thehighlighted cells should be cleared out of color and pop.
Here is the code that runs by command button:
Private Sub CommandButton1_Click()
Call FindNA
End Sub
Sub FindNA()
Dim ResultRange As Range
Dim ResultCell As Range
Dim iRow As Integer
[Code] ......
View 1 Replies
View Related
Dec 13, 2013
I want to create a macro to paste some data into the next empty cell. Below is sort of what I need but this show it going to a particular cell, I need it to got to next open cell in the range from say BY3. So next macro run it would copy and paste the data from T3:T9 (always this range) to BZ3 then CA3, CB3 and so on.
[[Sub CopyData()]
'
' CopyData Macro
' Copy The Data To Build Graph
'
[Code]....
View 1 Replies
View Related
Feb 15, 2014
On Sheet1 I want a macro that looks for the last used cell in Column D and then put tomorrow's date into column A, 2 cells below where the last used data was found in col D.
I then want to copy the entire contents of sheet2 and paste it into the cell below where we enter tomorrow's date.
View 5 Replies
View Related
Feb 20, 2014
I Need to write a macro for the following example.
In sheet 1.
It has data as below
HTML Code:
Sl.no Name Task week hoursworked
1 SAM Teaching 1 2
2SAM Teaching 1 2
3 SAM Teaching 1 3
4 SAM Teaching 1 1
5 SAM Teaching 1 5
I want to consolidate the data as like below and to paste it in sheet2.
HTML Code:
Sl.no Name Task week hoursworked
1 SAM Teaching 1 13
If the Name, Task and Week columns are same then macro should do sum the hours and make it into a single line as mentioned above.
View 5 Replies
View Related
Jul 27, 2009
I need a Macro that can look in column A to find the date, and then drop down one row and move to column B and then copy the data in that cell to column C back up one row.
I've attached the workbook so you'll know what i'm talking about. I need the green cells to be moved to the blue cells all the way down.
COLUMN A =Date
COLUMN B =Empty Row
COLUMN C=Copy Details
COLUMN D=Paste Details
View 8 Replies
View Related
Dec 26, 2011
I am looking for a macro that will allow me to the following:
- search column F for "word1", "word2", "word3", and/or "word4"
- then match the search to row on column C data
- then copy/paste row or rows of matched data unto "Sort" worksheet but only data from columns A, B, C, and F
- also, when copying, copy the row above
View 2 Replies
View Related
Dec 6, 2013
The number of rows in my spreadsheet will change. I am creating a Macro to insert a column and enter a formula in the second cell of the new column. I need to copy that formula down through that column to the last row, but don't know how many rows there might be that day.
View 2 Replies
View Related
Feb 14, 2014
I have set of data in sheet1 i want to copy and paste in sheet2 with same row height.
View 2 Replies
View Related
Mar 26, 2009
I have 2 reference cells with the date range to look for in C1 and D2.
G2 through IV2 have dates that run across.
I would like for the macro to look for the start and end dates in C1 & D2 and paste the new data as values from A1:B20 into those particular columns of dates within the range.
ABCD1head count23start7/1/092vac%5%end7/15/093iap%3%4misc%3%5off%21%6% ot0%7off%21%8% ot0%9rpr wk rt1.510inst wk rt5.0211go back %5%12nw Mvr %3%13fall out %10%14jep/incomplete %16%15lines in service116% esc3%17% change610%18churn rate60.994%19report rate0.297%20% of market2218%
View 9 Replies
View Related