Macro To Find Several Names And Paste Data
May 12, 2009
I have this macro below written. It isn't working for me and I am trying to figure out how to write it. Basically, the macro is supposed to go to the test.xls workbook and then look at names in row 4, from there it will take each name and search for it on the all csrs new.xls workbook and then move over to the right 5 times and copy data and paste 1 down from the name on the test.xls workbook. One workbook has the names going to the right and the other workbook has the names going down....
View 9 Replies
ADVERTISEMENT
Nov 4, 2009
I want to copy some data from internet and paste it in to worksheet location Range A1:A30. the data look like following information.
LocationKuwaitP.O.Box:4819 SafatAddress:ShuwaikhTel:-22253580Fax:-24343645Category:CONSTRUCTION COMPANIES
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
View 9 Replies
View Related
Nov 21, 2012
I have a table with names of employees in Column A, the data for each employee is written in columns B, C and D.
I'd like to be able to type in this data in cells E12-E14 and have Excel bring up all of the names in the table that are associated with this data, and preferably separate them with commas.
I'm working with Excel 2007, without VBA/Marcros.
Please see the example file: find_name_example.xlsx
View 7 Replies
View Related
Sep 13, 2010
I need a macro that will look for a specific text string in the tab names of the workbook and replace it with a new specified text string (leaving the rest of the existing tab names). In other words, a simple find/replace but applied to all tab names in the workbook rather than cells. Ideally, I'd like it to pop up something and ask for the text to find and the text to replace it with, so I don't have to edit the macro itself each time I want to use it, but editing the macro each time is fine. Either way will be wonderful.
View 9 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Apr 27, 2007
The macro finds the value in cell D11 (which is the name of a product) in a worksheet called "Summary1". It then looks for this value in another worksheet called "Output", specifically in a column with a named range called "Products". If the value being searched is found in the "Products" named range column (in the worksheet "Output"), the code below copies the entire row for it, to another sheet called "OutputSummary1". I would like to change the code as follows:
1) Instead of copying the entire row, for which the searched for value is found, from the sheet "Output" to the sheet "SummaryOutput1", I would like to instead only copy the values in columns A, B, and E to the sheet "OutputSummary1". Also, I would like the values to be pasted pastespecial so that the formulas in the sheet "Output" are not copied over, and only the values are copied.
2) Secondly, I would like to know how to perform the find procedure (searching for cell D11 contents) on all sheets in the same workbook beginning with the word "Summary" (There will be worksheets called Summary1, Summary2, Summary3, etc. that the macro should be performed on.) As well, the pasting should be perfomed on all respective sheets called OutputSummary1, OutputSummary2, OutputSummary3, etc.
Sub CopyPaste()
With Worksheets(1).Range("Products")
Set c = .Find(Worksheets("Summary1").Range("D11").Value, LookIn:=xlValues) 'this identifies the value D11 in worksheet called Summary1
If Not c Is Nothing Then
firstAddress = c.Address
Do
c.EntireRow.Copy Destination:=Worksheets("OutputSummary1").Range("a" & Worksheets("OutputSummary1").Range("a65536").End(xlUp).Row + 1)
Set c = .FindNext(c)
Loop While Not c Is Nothing And c.Address <> firstAddress
End If
End With
End Sub
View 7 Replies
View Related
Jul 26, 2013
I want to find data from a certain point and paste this to a cell. My objective is to get all the data on too one row. This row is always 1 in col M called Run#. The find locations never change, just the data being copied always changes . Heres example,
In col K find FHBASC and look across to the right 3 cells in col N and copy.
Look in col M and find 1, paste above copied data into col GI.
Then move down rows to next FHBASC and repeat process until end of sheet.
If I can get a very basic simple macro to do this, then hopefully I can just re write to suit my other data.
View 9 Replies
View Related
Mar 31, 2014
So ive got this macro that will find the text "SEP" in the active worksheet and paste it into the new worksheet. The Macro looks to see if a row contains "SEP" and copy that whole row and paste it into the new worksheet. I have over 5000 rows in column A that contains "SEP0014A9713685" and "SEP0014A981785C" So they are all different so its not just finding "SEP" So i need some type of Contains "SEP" for column A. This is the macro i have right now.
' Devices that contain SEP
Dim strArray As Variant
Dim wsSource As Worksheet
Dim wsDest As Worksheet
Dim NoRows As Long
Dim DestNoRows As Long
Dim I As Long
[code].....
View 3 Replies
View Related
Mar 24, 2009
I have 10 worksheets. They are labelled 'FEB', 'MAR', 'APR', etc...to 'NOV' (NB: JAN & DEC not needed). In column "G" on all these sheets I have the data as "CURRENT" or "OVERDUE". The first 3 rows on every sheet are headers, so the data starts at 'G4' on every sheet.
I then have an "OUTSTANDING" sheet which will display all of the "OVERDUE" items from the various months. I have an UPDATE_Click() event which when actioned needs to search all the column Gs in the month sheets and then copy the data from column 'B' to 'F' of the corressponding row to an "OVERDUE" result. The data from B-F then needs to be pasted in the next available row on the "OUTSTANDING" worksheet (starting at row 4, as first 3 rows are headers with merged and unmerged cells).
Nothing fancy, when the search go does the column and hits a blank cell that means its the end of the list and can move on to the next month.
View 9 Replies
View Related
Mar 4, 2009
I have a workbook with many sheets in it. Within each sheet there is a cell with the Text "March 09" there are then 3 cells to the right of this cell with relevant information. Is there a Macro that can search for this text March 09, then copy this and the 3 cells to the right of it and paste special this information 1 cell below for all 4 cells.
View 2 Replies
View Related
Nov 5, 2013
Let's say sheet - "delivery" - has a row1 that includes all possible delivery days. So A1 is 1.9.2013, B1 is 15.9.2013, C1 is 1.10.2013 and so on.
I want to make a macro, that will gradually go through whole row 3 in sheet "delivery" and look for "A1" date in sheet "Orders". Sheet "orders" have for example in column B the date of delivery, and in column C product of the delivery.
I want the macro to find all deliveries with "A1" date, and paste all products that will be delivered on this day under cell A1 (sheet delivery). then move on to the cell B1 (sheet delivery) - find all orders in sheet orders, that will be delivered on B1 date, and list all products with this delivery date under cell B1 (sheet delivery).
Example:
Sheet order
A
B
C
Date of delivery
Product
1.9.2013
orange
[Code] ........
Unfortunately simple Pivot table is not able to do this simple list.
View 3 Replies
View Related
Sep 26, 2009
I am trying to create a workbook that would work as follows:
I enter values in worksheet 1 that calculate a comparison of 2 items.
I recorded a macro that pastes these 4 rows into worksheet 2 and clears data entered in worksheet 1.
So far - easy.
What I would like to do is find some code that would let me enter new values in worksheet 1, and when the macro is executed, it would find the first blank row on worksheet 2, skip a row, and paste the info.
By doing it this way, I would be able to keep adding new items, compare them and add them to worksheet 2.
View 6 Replies
View Related
Jan 13, 2013
The code below looks at file names in column A and then goes to a folder and opens and copies the data in range c2 -lastrow from each file and pastes the data into sheet2.
how I could add to the code so that it also inserts the file name in column c?
It would make it easier to track the data in column B.
VB:
Sub CopyFromFile()
Dim fPath As String
Dim lRow As Long
[Code].....
I have attached a sample workbook. The list of file name is in sheet 1. An example of the output is in sheet 2. The data in column A is dummy data generally spans 100's of rows not just 10 as in the example.
The purpose of the code is to be able to put a list of file names in column a in sheet 1 and extract data from those files in a folder. The data extraction works fine. The reson for adding the file names is so that I know what file the data came from.
View 1 Replies
View Related
Mar 23, 2012
Excel 2007, Windows XP Pro
Dim strLoan As String
Dim longCat As Long
Dim rHere As Range
Range("A1").Select
[Code] .....
I can see the cursor move to all the desired cells when this macro executes; it just isn't dropping any data where it should be. I have been working at this stage for the last five hours with no success. I don't know whether my copy-paste methodology is broken or if it is my selection criteria
View 1 Replies
View Related
Feb 22, 2007
I am needing to find a specific row of data in one workbook and, once found, copy and paste the values into another workbook. The worksheets in both workbooks are formatted exactly the same. Only the first eight fields of the row need to be copied (e.g. A7:H7, A150:H150, etc.)
Will a combination of VLOOKUP and ROW do this and how do I get them to work together? Once the correct row is found, how are the fields selected, copied and pasted into the specific worksheet of the other workbook?
View 6 Replies
View Related
Feb 21, 2012
I need to firstly find data in the main sheet which relates to the activecell and then I want to copy and paste that data into another worksheet.
The simplest of ways I guess would be the .xldown function however this seems to copy the blank cells as well as the cells with data, which is no good. I have therefore written code as below which finds the first cell with data, copies and pastes, then loops.
How do I set the loop to look at the next cell down from the initial copied cell and if there is data in it to paste it into the cell underneath the one I have just pasted into?
Range("D3") = ActiveCell.Offset(0, 1)
SheetName = Range("D3")
ActiveCell.Offset(0, 2).Select
[Code]....
View 7 Replies
View Related
Feb 22, 2007
I am needing to find a specific row of data in one workbook and, once found, copy and paste the values into another workbook. The worksheets in both workbooks are formatted exactly the same. Only the first eight fields of the row need to be copied (e.g. A7:H7, A150:H150, etc.)
Will a combination of VLOOKUP and ROW do this and how do I get them to work together? Once the correct row is found, how are the fields selected, copied and pasted into the specific worksheet of the other workbook?
View 4 Replies
View Related
Feb 4, 2014
I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.
I'm very new to excel macros and the parts I think I've put together are:
Cells.Find("Not on AOI", After:=ActiveCell, LookIn:= _
xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _
xlNext, MatchCase:=True).Activate
[Code].....
View 1 Replies
View Related
Dec 14, 2008
I have a workbook that has 397 sheets. On many of the sheets (but not all) they have some of the same data. On sheet 1 cell B5 is ContactID, Sheet 15 cell B32 is also ContactID. Sheet 1 A5 needs to reflect Contact ID and Sheet 15 A32 needs to reflect Contact ID. I need to find all sheets that contain the data "ContactID" and place (paste?) Contact ID in the same row, but in Column A.
Right now I am doing a Find all and clicking through the sheets 1 at a time (some of these finds though have 30+ sheets).
View 14 Replies
View Related
Nov 27, 2007
i need a method to find the end value in a row (right side) and select the empty cell to its right to paste data in.
problem is the row where this data is may change so using
limit = (row, col).end(XlRight).Col
View 9 Replies
View Related
Oct 26, 2006
I am desperately in need of a macro that will count the number of items in column A of each worksheet and then summarize the results next to the names of the worksheets (i.e. in two adjacent columns) on Sheet 1 of the book. Obviously, Sheet 1 needs to be ignored by the macro.
View 3 Replies
View Related
Aug 5, 2009
DSee the attached.
The current spreadsheets add up each persons totals by matching the name in each tab with the name of the person who won the job located in current orders tab.
BUT.....If two salesman pair up on up on a job then the formula doesn't recognise the joint name. eg Gary/paul in row 69 (current orders).
I need the totals to half the job and add it to the salesmans total accordingly. There is no 'Paul Tab' as he is our MD and doesnt have a target.
View 5 Replies
View Related
May 7, 2012
Can I create data validation list of the names created in the name box or of the sheet tab names?
View 5 Replies
View Related
Dec 10, 2008
I need to make this macro read FOLDER names instead of FILE names. When I posted this question yesterday to get this macro, I wasn't told that each file in its own folder. I need the folder names now.
_____________________________________
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "C:Ford"
.SearchSubFolders = False
.Filename = "*.*"
.FileType = msoFileTypeAllFiles
If .Execute() > 0 Then
For i = 1 To .FoundFiles.Count
Cells(i, 1) = .FoundFiles(i)
Next i
Else
Cells(i, 1) = "No files Found"
End If
End With
End Sub
View 9 Replies
View Related
Mar 28, 2014
I have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
View 9 Replies
View Related
Oct 18, 2013
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
View 6 Replies
View Related
Dec 6, 2006
I've have defined 4 names (included ranges) in a workbook. The name ranges are automatic updated by a macro. So the used rows are every time different
Now i want to paste the values what's in the range of the 4 names on a other sheet. But how?
To well know my question. I don't want to paste the 4 ranges, but the value the range has selected on that otger sheet.
View 9 Replies
View Related
Jan 23, 2009
I have a workbook which contains 12 sheets, 1 for each month of the year. I also have over 100 sheets, 1 for each agent that covers their stats for each month of the year based on some of the cells from the monthly sheets.
I am trying to drag the formulas over but it will always just refer to January, instead of January and then next cell refers to the February tab, etc, etc.
View 9 Replies
View Related
Jun 10, 2014
Example:
from cell b12 to i5, then
From cell d12 to j5 then
From cell d13 to k5 then
From cell d14 to l5 then
[Code]...
Each time back to cell b, i have to add 3 cells, like from b15 to b18.
I would like to automate this process, but i did not know how to make macro increment by 3. Etc. I have hundreds of numbers to deal with.
View 1 Replies
View Related
Feb 7, 2014
making a Macro to do the following:
The user selects a product from a drop down I need the macro to lookup the selected student in the dropdown in a table on another worksheet. Once found cut the whole row this that student in and paste it in another worksheet.
View 14 Replies
View Related
