Macro To Repeatedly Run Another Macro If Cell Is Greater Than Zero
May 17, 2013
I have a macro called "ResultCopyPaste". When it is run it copies and pastes some results. I have a cell C23 that counts how many more results need to be run, copied and pasted. As each result is copied and pasted the count changes. When the count gets to zero nothing else needs to be done.
I want to create a macro that will repeatedly run the "ResultCopyPaste" macro until C23 shows zero. What is the VBA code? Presumably something to do with repeating the macro if C23>0
In case it's relevant the code for the ResultCopyPaste macro is:
I need to have an automatic macro where if the Cell Value in SPREADSHEET 2 for example Cell J5 is greater than 0 (Zero is the default value in the cell).
Then the macro will open up a msgbox that says "You Are Not Eligible" in SPREADSHEET 1.
I would like the macro to run on its own if the cell value is greater than 1
i have data comming into the excel sheet using sql, and j1005 cell calculates the entire data displays 1 if condition of j1005 is met else display 0 . the data refreshes on its own and j1005 keeps check every time and display the value 1 or 0
I need to have an automatic macro where if the Cell Value in SPREADSHEET 2 for example Cell J5 is greater than 0 (Zero is the default value in the cell).
Then the macro will open up a msgbox that says "You Are Not Eligible" in SPREADSHEET 1.
This is the code that I have placed in SPREADSHEET 2.
Private Sub Worksheet_Activate() If [J5] > 0 Then Sheets("Spreadsheet1").Select MsgBox "You Are Not Eligible" End If End Sub
I have a data sheet with large macro for processing the data... the last piece of the puzzle is to cut the entire row and paste it into the next available row in another sheet within the workbook if the value in column N is >0. I have tried a few things that I have found out in various places on the net but i seem to always come up with a loop or error of some sort.
I am currently working on a project that adds shoes to a re-order list, and a receipt automatically when they are 'purchased'. The re-order list is great as the shoes 'purchased' are supposed to be added one after another, my problem being that the receipt is for a customer.
Once the shoes 'purchased' are added to the receipt it can be printed. I then need to be able to clear the rows with values greater than 0 so that I can start with a new customer, on a clean receipt. I need it to check starting from row "A3" so that my receipt format is not messed up, and for it to finish leaving 2 blank rows so that my other macros still work.
I would like to use a macro to clear the rows to make it easier for the user.
If anyone has any suggestions I would be very greatfull and if you require the document I can arrange for it to be sent via e-mail.
I have to make a table that shows that a if someone purchases
less than 5 items they receive no discount 5-10 items they receive 2% discount 11-20 items they receive 5% discount 21-50 items they receive 8% discount over 50 items they receive 10%
and it has to be done in a way that the discount rate can be calculated using Vlookup I am struggling to find the best way to write this table. i tried numbering 1 to 50 and writing the corresponding discount rate in the second column but this looks untidy and can't calculate greater than 50 as i am not sure how to write it in the cell so it reads as >50 and not just 50.
I have a macro where I manually select a cell then the macro kicks in to copy and paste the contents into the Find function. From there it goes to another work sheet, clicks on a cell in column one and searches for matching cell contents. Then If false it manually goes back to the original worksheet/cell and then I input a N in the left adjacent cell. If true I enter a Y. Right now I can only run this for the specific cell the macro was recorded for. I would like to expand this.
What I would like to do create a loop in the macro that waits for my cell choice input then continues with the with the Find function. If false the macro should just loop back to the original worksheet/cell and wait for input, ie the next cell selected. However, if true a worksheet/cell is selected, a Y is input and it loops back to the original cell and waits for input.
This is the code I use to call a macro when the macro Im calling is in the same workbook.
[Code].....
However, I would like to call this same macro when using another workbook. I copied the macro "Clearformating" and pasted into a personal macro workbook module. However when I add this code to the sheet tab it will not run the macro.
1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
Basically, what I'm dealing with is an inventory system. When a cell value reaches below a certain quantity, we have a cell light up with the word "YES" (under the "re-order" column). What I'd like to do is have a macro that checks to see if that cell is populated with "YES" and if it is, to run another macro (which I already have written) that sends out an email notifying us of the need to re-order.
How it would work: The person pulling out the inventory would fill out this form and click "Submit"
submitbutton.jpg
I would then have a "call" code tied to the "Submit" button that when clicked, would run the macro to check cell population and send out the email. The email code is already written and works flawlessly on it's own. I just cant seem to figure out how to write a macro that checks for cell value and then runs it (or not) based on that.
I have a worksheet in which lot of information is entered on a daily basis, so far for the year there are 350 rows which I scroll up and down or autofilter etc to look at older info. I have created a button to make it easy to always return to the cell that I have been working on whether I have scrolled up a few hundred rows or used autofilter. Although I always want to keep autofilter on as it is needed to make other code work. The code I am trying to use is...
I have a problem with my formula. As you can see, i want to get the CIM number of the Team Leaders (TL Name) when i change the dropdown list of the campaign. But what im getting is the repeated CIM numbers.
I want to sum two cells, doesn't sound that difficult but I want to be able to change one of the cells over time. Hence, if B1 is the total sum cell, and A1 is what I fill in. B1 starts at 0, and if I fill something in in A1, B1 will sum itself and A1 (Unfortunately this gives me a circular reference). So what I'm looking for is some way to use paste special automatically in the formula B1 I guess. It is possible and how?
I want to merge two cells repeatedly, down a row for an entire tab. For instance merge A1 and B1, merge A2 and B2, merge A3 and B3 and so on. I feel like there should be an easy way to do this but I cannot figure out a way other than manually going through each row and do not know how to write the macro. Sadly I have about 500 rows in 10 sheets so doing this manually would be.
I have a situation where I want to copy the first 6 rows of data in a worksheet down 11000 times and right below the previous. I can get it to copy down, but I can't keep the formatting the same, and the formatting is important for when I print. After I get this to copy down the values and format, I'll be inserting pagebreaks every 6th line.
I have the following code right now: Sub PasteDownFormat() Dim x As Long, i As Long x = 11000 If x < 1 Then Exit Sub With Range("a1:l6") For i = 1 To x Cells(i * 6 + 1, 1).Resize(.Rows.Count, .Columns.Count).Value = .Value Next End With End Sub
I have the following information in a cell. I want to get the exchange:ticker which is inside the brackets to be returned (coma delimited). How can I do this? One thing to note here that the number of companies in the cell can vary
Banco Bilbao Vizcaya Argentaria (CATS:BBVA); Banco Santander, S.A. (CATS:SAN); Banesto Banco Espanol de Credito SA (CATS:BTO); Banco Popular Espanol SA (CATS:POP); Caja de Ahorros y Monte de Piedad de Madrid; La Caixa Group, Asset Management Arm
I have a peice of code (Below) and instead of going from work sheet 4 to the one in the workbook 2 from the end sheet by sheet running the same bit of code it just loops repeatedly on one sheet??
Sub a()
Dim n As Integer For n = 4 To ThisWorkbook.Sheets.Count - 2 Columns("W:W").Select Selection.Copy Selection.Insert Shift:=xlToRight Columns("L:L").Select Selection.Delete Shift:=xlToLeft Range("L8:L9").Select Selection.AutoFill Destination:=Range("L8:W9"), Type:=xlFillMonths Range("L8:W9").Select Application.CutCopyMode = False Next n End Sub
My question: Is it possible to write a code that calls the macro with the name specified in a particular cell? Right now I have some AutoFilter going on making a list that has numbers 1, 2, 3... I also have alot of macros named Search1, Search2, Search3... So I can make a cell, say A28, that combines "Search" with whatever number is in Column C, row 29:
The spreadsheet has over 200K rows and two dozen columns. My job is to:
1. There are two columns, one is called OCR code where we have repeating ID's and other column is called Minutes Count which is basically a number. I have to filter the OCR column for similar OCR codes(values) and then add their time(Minute Count) so that I get total minutes for a specific OCR code. After adding the min I will copy them into a new sheet with the code in one column, total minutes in another and number of repeatitions for that specific OCR code or count number in a separate column. Example:
Now I've to filter 54xg so that I can only see it and its corresponding minutes. Then I will add up all min for 54xg. Then I will count the number of instances a 54xg has been repeated in spreadsheet(here its 2 but it can be in hundreds in my case). Last thing is to transfer all this data to a new sheet. And automatically repeat the process for other OCR codes like 45fk, 23IS etc...
is possible to have a cell's text color change if the value of the cell is greater than a certain amount. For example, if the cell is $200 or more the text would change to red.
If I wanted to highlight a cell if any cell in the range to the right was greater than zero, what formula would i use. I have tried =IF(L1:AD1>0,1) with the result returning for only the cells in column L. Row 3 has no value in column L but a value in column N with no result to highlight the cell.
I’m trying to write a macro to look down two different columns in my work sheet and if the is a value >0 then copy a set range of cells to another sheet,
I need to search column (k) and (x) range (“K2 : K147”) and (“X2 : X147”) in (sheet1) for values >0 if there is, then copy from (“f : m”) if it is found in the (k) column, or copy from (“s : z”) if it is found in the (X) column, and paste value only to the next empty cell in sheet2 . Sheet2 is empty so (A) on down is fine for paste range. There is a spin button in the copy range column (L) and I don’t want that picked up in the copy. Manually I (paste text) only but I think (values only) will do the same thing.
