In Column A i have a long list of alphanumeric words , some of them end with a vowel "aeiouy". I want a macro that will go thru the list in A, and check if word in a cell end with a vowel, then put it in B column, so that in B i will have all the words ending with a "AEIOUY".
View 5 Replieswhere i can grab a number from a cell it would ALWAYS be the last string item..
for example if cell A1 has the following text:
04/02 Card Purchase 03/31 Google*1873060297 Cc@Google.Com CA Card 5036 $500.00
i want cell B1 to hold just the $500
this wold always be the case for everything im trying to do
I am working with a somewhat lengthy worksheet with over 60,000 records. oOne of the columns within the worksheet is the "Account Number" column, which typically consists of 14 numerical characters, but can sometimes have additional or fewer characters. I need to set up a conditional format to pick up any account number that ends in an alphabetical value, (e.g. a through z). The account number is located in column G.
View 4 Replies View RelatedI would like to extract competition naps from the competition entries and then remove the string ending "nap" from the data so it can be pasted to another sheet in it's 'clean' format.
on the example sheet column B will always be the first column and the range will extend to either G,H or I (always the max range as there are always 6 to 8 races)
i would like the code to search through these columns of data and find the cell ending in 'nap' then to return this in column i, once done remove 'nap' ending from both the source cell and column i.
once done to then go through all the rows and do similar
the end result would be all naps returned into cell j and all the 'nap' endings through the data range B to I (max) to be removed to leave the horses name only.
in book 3 the first row nap was sommersturm so i have shown the outcome i would like with the nap ending in I1 removed and the horse name returned in J1 again minus 'nap' ending.
the data will always be clean with no leading/trailing/excessive spaces and always be lower case too. sometimes a space is not in between horse name and nap but it's always last 3 characters i want removed still.
How to modify a custom cell format to make data entry easier.
My goal is to have the output look like this: 'A12B-C20D: SET 10: Text string here'
Inputs needed are:
1-3 digit number between A & B
1-3 digit number between C & D
1-2 digit number after SET
Text string of variable length
Where I am stuck. So far I can get "A12B-C20D: SET 10:" to show up properly when 122010 is input. The custom format I am using looks like this: "A"##"B-C"##"D: SET "##": "
When I try to incorporate the "@" symbol the first part of the formatting goes away and the output shows up as "122010 Text string here".
I have tried:
"A"###"B-C"###"D: SET "##":";;-;_@
"A"###"B-C"###"D: SET "##": ";;@
"A"###"B-C"###"D: SET "##":";_@
"A"###"B-C"###"D: SET "##": ";;;@
how to use a formula or macro or whatever that is applicable to solve my current issue.
For example:
I've the following text below. The prefix of "atest", "bgo", "crun" and "dfly_c" are fixed pattern, however, the text after prefix will change accordingly.
atest_myhomeisfar
bgo_runfast
crun_b:veryfast
dfly_c:bluesky
Now my request is, I would like to have the final output as per below. Notices that there are some additional numbers behind the text (with semicolumn).
Final output:
atest_myhomeisfar:1998
brun_veryfast:2009
cfly_bluesky:1790
dfly_c:bluesky:1800
My question is, is it possible to create something to handle this issue? I mean something that will seach thru a particular fixed pattern as mentioned above and add the number behind it?
I would like to do it one at the time (one prefix at a time). Not mass searching and adding.
For example:
Search all "atest*" pattern and add an additional number behind.
I am having a row with values from 21 to 45 and continued again from 1 to 25
Some unknown number of rows in the beginning
25
26
...
40
41
42
43
44
45
1
2
3
4
.
.
24
25
to find column position of "1" i am using code
Worksheets("sheet1").Rows(2).Find(What:="1", LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:=False).Column
But it is returning column number of 31 and when i delete or hide that column it returns column number of 41.
Cant i search for exact value 1 in my row?
So I was given the task to translate some procedure instructions in an Excel file from English to Spanish. These are very simple instructions and in most cases repetitive throughout the document. There are a lot of instances where the instructions are the same except for a #. They are meant to be modified within the cell as the text that appears in the cell will be printed exactly as it appears.There are several instructions in the cell, it is basically a long continuous string in the cell. My idea is to create a macro that can search that range of cells for the instruction, replace it with the Spanish equivalent while leaving the original English instruction in the cell.
View 6 Replies View RelatedI am doing a Regular Expression search on a string variable assigned to the HTML content of a Wikipedia search. However I am currently manually going to Wikipedia, searching for the term, saving the html page, opening the saved page with Notepad and then copying the content into a cell.
Can the above process be automated with VBA, how to assign the html content of a Wikipedia search to a string variable.
I am trying to write a macro to search a column for a specific text string which when found, will copy the whole row the string is in. Once this row has been copied, I then want the macro to activate a new sheet and search for the next available empty row to paste the data. Once this has been done, go back to the original sheet and find the next cell in the original column with the specified text string and repeat until the range has been satisfied. Below is the script I have that sort of works.
View 5 Replies View RelatedI'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I have a macro I use cleanup up excel data I paste into it. Currently I paste in data that is three columns but there is space between the different items. For example:
View 2 Replies View RelatedHow I can deselect the selected cells before ending the macro. Ihave a workbook containing about 40 sheets, and need to clear the same cells on 31 of them. I have attempted to define a name for the range, and actually got it to work once, however it ceased working on the second attempt, and I don’t know why. I have therefore gone back to the original code as posted below.
My questions are a) how can I deselect all the cells and b ) how can I use a defined name for the range so that I can use something like clear contents and not have to select the cells?
(I have also cleared all unlocked cells previously, but I have some unlocked cells in the other sheets I do not wish to clear).
Subnewmonth()
' newmonthMacro
IfMsgBox("This deletes all data, do you wish to continue?", vbYesNo) = vbNo Then Exit Sub
Sheets(Array("1","2", "3", "4", "5", "6","7", "8", "9", "10", "11","12", "13", "14", "15", _
"16", "17","18", "19", "20", "21", "22","23", "24", "25")).Select
Sheets("1").Activate
Sheets(Array("26","27", "28", "29", "30","31")).Select Replace:=False
[Code] ..........
I have a sheet called "Words Ending In"
In ColA From A 3 downwards I have a large list of keyword phrases.
I am looking for a macro where I click on a assigned macro button and a pop up box appears saying
" Find words Ending With"
In the space provided I insert a word.
So, for example I insert the word "rent".
The macro then looks at all the data in ColA (From A 3 downwards) and searches for all keyword phrases ending with the word "rent".
If it could return All Phrases in ColC (From C3 downwards).
If it can't find any, then if a pop up box can appear saying something like "No Data Found"
That's it really.
If it could have a pop up box at the end saying
"Total Phrases Scanned: 1234"
" Total Phrases Found Ending With "In"
"Time Elapsed (sec.): 12.12353
I have a spreadsheet which has "Employee: [agent 1 name]" in column A and it may or may not have the word "Break" in the same column before it mentions "Employee: [agent 2 name]". The amount of data between agent 1 and agent 2 varies and am needing code which will insert a row above "Employee: [agent 2 name]" if "Break" is not found, and add the word "Break" in column A on the inserted row. I would need this to loop through the spreadsheet until all 100+ agents have been searched.
I'm also needing this done for the word "Meeting" and would insert a row 2 rows above the next agent.
I want to execute a macro (MyMacro()) AFTER a different macro (Different_Macro()) ends. Different_Macro() is always run from a menu button while editing a codepane in the VBE. At the end of Different_Macro I have this code:
View 5 Replies View RelatedI am trying to lookup if a string like a name exists in another string which has a buch of values for example to see if andy exists in a string which has data like andy;sandy or sandy exists in andy;sandy
View 9 Replies View RelatedI have a column with text that can contain a number of words one of which is 'UK & Europe'. I want to have another cell which will contain the value EMEA if the the cell mentioned above contains the word UK. how to do this as I'm stumped... I get a #value in cells that dont contain the word when using the formula =IF(FIND("UK",H27),"EMEA","ROW")
View 4 Replies View RelatedIs there a way to search for a cell that does not match or include a string?
I tried "^xyz" and "xyz" with no luck.
Scenario:
A1:A2000 (or the wole column) will have the following:
Black Total
Grey Total
Total Grey Print
Blue Total Print
and so on.
Each cell will contain the word "Total". In B1:B2000 ( or the whole column) I would like to remove the word total from the column A. Example:
B1 should only contain Black (instead of Black Total)
B3 should only contain Grey Print
B4 should only contain Blue Print
I have this sheet: BEFORE MACRO..............
MACRO RESULT..............
Macro descripion:
Column A ( SEARCH STRING) list the string to be searched in C column
Column B (RESULT) reports the macro result
Column C ( List ITEMS ) is the column where the macro have to search the string
Operation:
- Starting from A2 up to the end of value in A column
- Search the substring ( A2 cell value ) in C column starting from C2 * if found copy all the C row content in B2
If 'not found' write NOT FOUND (*) all search ( from A2 to An ) starts always from C2
I'm using the following code which is working well. It finds an instance of the string "A83". Once it finds it, it moves down x number of cells and populates it with a new string. It then moves down another x number of cells and populates it with another new string, etc.
The problem is, it is only looking for "A83" one time and performing the appropriate actions at that point. What I need to do is look for *every* instance of the string "A83" and perform the appropriate actions.
I am trying to get a code that will look for a string in the first row of my workbook and insert a column next to the found cell.
View 6 Replies View RelatedI trying to search for a string in Excel and then delete that row. The code below will do that but I am also looking to delete the next row line out as well. .
Dim ws As Worksheet
Dim lRow As Long
Set ws = ThisWorkbook.Sheets("DSS")
[Code]....
I have a table of data and i need to search the table for 8digit numbers, that are beginning with "2" and copy the numbers to the column on the right. A cell can contain multiple numbers with 8 digits.
View 9 Replies View RelatedI use the following code to search through a database and paste the results in a separate worksheet.
Private Sub TextBox8_KeyUp(ByVal KeyCode As MSForms.ReturnInteger, ByVal Shift As Integer)
sheets("Search Results").Unprotect
Dim cell As Range
Dim foundcell As Boolean
If KeyCode = 13 Then
Application. ScreenUpdating = False
Application.enableevents = False
If Not TextBox8.text = "" Then
For Each cell In sheets("Detail").Range("e2:e" & sheets("Detail").Range("e65536").End(xlUp).Row)
If cell.Value = TextBox8.text Then
foundcell = True
With sheets("Search Results").Range("e65536").End(xlUp).Offset(1)
.Value = cell.Value
.Offset(, -4) = cell.Offset(, -4).Value
.Offset(, -3).Value = cell.Offset(, -3).Value
.Offset(, -2).Value = cell.Offset(, -2).Value
.Offset(, -1).Value = cell.Offset(, -1).Value
.Offset(, 1).Value = cell.Offset(, 1).Value ................................
Im am trying to create a search marco button that allows me to search in multiple worksheets in one work book. I came across this CODE the first part of it works. It pops open user input box and ask for the word that i would like to search but the this error message pops up Runtime error1004 Method 'range" of object'_Global'failed and i dont know what to do
Private Sub SearchButton_Click()
SearchString = InputBox("Enter Search String", "Search")
If SearchString = "" Then Exit Sub
For Each c In Range(myRange)
If InStr(LCase(CStr(c)), LCase(SearchString)) Then
[Code]....
I require the code for the following task.
I'm getting an input string from the user in an excel sheet(e.g. input.xls) .I have to search for that string in a group of excel files present in the same folder in which the input.xls file also present.The range of that cell in which the string is found (e.g. A1 ) has to be stored in a variable.
I know that Vlookup is an option but the number of excel files to be searched is more that 50.
If I have a store number (say 1234) and I am trying to search for something which contains 1234 (i.e. the whole string of ABCD1234, ABCD1235, ABCD1236 etc) is it possible to do this in one VLOOKUP formula?
One way of doing it would be to VLOOKUP("ABCD"&"1234",....) but I would rather do it the other way around, to prevent the formula from not working.
I have put a formula in excel to count how many times the word 'administration' appears in a column:
=COUNTIF(K2:K99,"Administration")
Unfortunately, the output that I am searching has mulitple words in it, separated with a colon and no space. My formula skips the count if the word Administration is not completely on it's own
e.g. Administration counts 1
Administration;Cardiology does not count