How I can deselect the selected cells before ending the macro. Ihave a workbook containing about 40 sheets, and need to clear the same cells on 31 of them. I have attempted to define a name for the range, and actually got it to work once, however it ceased working on the second attempt, and I don’t know why. I have therefore gone back to the original code as posted below.
My questions are a) how can I deselect all the cells and b ) how can I use a defined name for the range so that I can use something like clear contents and not have to select the cells?
(I have also cleared all unlocked cells previously, but I have some unlocked cells in the other sheets I do not wish to clear).
Subnewmonth()
' newmonthMacro
IfMsgBox("This deletes all data, do you wish to continue?", vbYesNo) = vbNo Then Exit Sub
Sheets(Array("1","2", "3", "4", "5", "6","7", "8", "9", "10", "11","12", "13", "14", "15", _
"16", "17","18", "19", "20", "21", "22","23", "24", "25")).Select
Sheets("1").Activate
Sheets(Array("26","27", "28", "29", "30","31")).Select Replace:=False
When i tranfer my listbox content to sheet the selected item remain selected in listbox
Dim i As Long, j As Long For i = 0 To Me.ListBox2.ListCount - 1 If Me.ListBox2.Selected(i) Then j = j + 1 Worksheets("Workings"). Range("AA" & i + 2).Resize(1, 1).Copy Worksheets("Print").Range("B" & Rows.Count).End(xlUp).Offset(1) ListBox1.Selected(i) = False End If Next i
I have a range selected (A4:C15).I would like to deselect the range and make A4 the active cell. Is this possible without a macro?
With a macro, one could use: Application.Goto Selection.Cells(1)
I generally select a large number of cells and would like to go back to the start cell in the range. I could do it by pressing the left and right arrow keys but is there a shortcut that will allow me to do the same?
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I have a macro I use cleanup up excel data I paste into it. Currently I paste in data that is three columns but there is space between the different items. For example:
In Column A i have a long list of alphanumeric words , some of them end with a vowel "aeiouy". I want a macro that will go thru the list in A, and check if word in a cell end with a vowel, then put it in B column, so that in B i will have all the words ending with a "AEIOUY".
In ColA From A 3 downwards I have a large list of keyword phrases.
I am looking for a macro where I click on a assigned macro button and a pop up box appears saying " Find words Ending With" In the space provided I insert a word.
So, for example I insert the word "rent".
The macro then looks at all the data in ColA (From A 3 downwards) and searches for all keyword phrases ending with the word "rent".
If it could return All Phrases in ColC (From C3 downwards).
If it can't find any, then if a pop up box can appear saying something like "No Data Found"
That's it really. If it could have a pop up box at the end saying "Total Phrases Scanned: 1234" " Total Phrases Found Ending With "In" "Time Elapsed (sec.): 12.12353
I recorded a Macro that would take a value of a particular cell and add that value to the selected cell in the same row. However, this macro just runs on one cell and I want it to run on the entire row.
This may seem like a trivial issue but I've been racking my brain for the last couple of days to figure it out.
Here is the VBA code of the Macro I recorded. It adds the cell value to another cell with formulas already in it as you will see below:
Sub SpreadingTest15() ' ' SpreadingTest15 Macro ' ' ActiveCell.FormulaR1C1 = _ "=IF(MarRF!RC9=""Trade"",IFERROR(IF(RC12=""BL"",RC13/12,INDEX('Variable Data'!R4C2:R16C17,MATCH('1410-Rev'!RC14,'Variable Data'!R4C2:R16C2,0),MATCH('1410-Rev'!R14C,'Variable Data'!R4C2:R4C17,0))*RC13),0),IF(RC14=R14C,RC13,0))+(RC35)" ActiveCell.Select End Sub
I've made a push button on the sheet. By selecting a couple of cells and then pressing this button I want to change the background color of the selected cells as well as add some text (same for all selected cells).
I am looking for a macro or function (VBA) that will modifiy the value of the selected cell or cells. the code should support selection of one cell, a range or multiple ranges.
I envision the user making his range selection(s). Activating a function or clicking a button that would pop open a modal window. The user would have the option to either adjust the values by a % change (i.e. up or down 7%), or incremental change (i.e. up olr down 100 units). The function would overite the value in the cells.
Has anyone ever done something similar? Is it hard to program?
i m trying to set up a macro to convert a range of user-highlighted(selected) cells to 3 significant figures: for example, convert 0.135564 to 0.136
the equation i found elsewhere online: ROUND(xx,3-(1+INT(LOG10(ABS(xx))))). but i can't quite figue out how to apply the equation to a selected range of cells via a macro.
I have a worksheet with ever expanding data - rows at the bottom of the data are continually added. I have a simple macro that sorts all of the data according to preset parameters and selects the next blank cell in column A, ready for more data:
Sub Macro5() Range("SortRange").Select Selection.Sort Key1:=Range("SortRange"), Order1:=xlAscending, Header:= _ xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:= _ xlTopToBottom Do Until ActiveCell.Value = IsEmpty(True) ActiveCell.Offset(1, 0).Activate Loop End Sub
When running the Macro, this leaves all of the cells in the range 'selected' (ie; coloured-over). What do I need to add to the Macro to just select the cell in Column A and remove the highlighting from all the other cells?
The concept is to have a user open a sheet that breaks down that current day into 15 minute blocks of time. Later, I will work to append that to an Access DB or to a master Excel sheet as I will have multiple engineers inputing times for multiple days. There are multiple paths for this....We don't have Access for everyone yet or I would look at that path now.
Right now I am trying to make the initial input screen easy to use so that they actually use it.
I want to allow the user to select multiple 15 minute blocks and then click a button that adds a specific value to each of those cells. For instance, they might choose 8 15 min blocks that are not necessarily blocked together (C5, C7:C10, C15, C20:C22) They would hit the "Project 1" button and "Project 1" would be inserted into each of those cells.
I have about (5) categories so I would simply have (5) buttons with the different inptu strings.
But how can I have a macro set the value for multiple selected cells? Ideally, they would not have to be blocked together but, if there is no other way, if I could have blocks of cells filled in all at once.
I am using Excel 2010.
only a few of us have Access but I will be the only one accessing the collected data. Besides, I would make Excel query the Access DB for more general use. I
I have a spread sheet with large number of data, problem is all are in various currency so rather than typing =#####.##/a1 in every cell to get the GBP amount (a1 where my exchange rate is linked) I thought if there is macro can do this job for rme.
So what i need is macro which once run enter the formula after the numbers already in the cell in selected or given range.
I want to execute a macro (MyMacro()) AFTER a different macro (Different_Macro()) ends. Different_Macro() is always run from a menu button while editing a codepane in the VBE. At the end of Different_Macro I have this code:
I'm trying to create a macro that will change the color of the cells I've selected to green. My selection will vary depending on what cells I'm trying to color green (not a fixed range). My current code only changes one cell of my selected range:
Sub IN_PCA() ' ' IN_PCA Macro ' ' ActiveCell.Select Range("M243").Activate With Selection.Interior
[Code] .......
I've tried using "ActiveRange" in lieu of "ActiveCell" as well as other commands that would seem to be correct but have failed.
write a macro - Condition: When i select "Audit Round" = "Round 1" in B2 and press a button it will automatically copy data from B5:B8 and paste special value in C5:C8. Likewise if I select "Audit Round" = "Round 2" in B2 then it should lookup "Round 2" in "Row 4" and paste special values from B5:B8.
I have a folder "D:Documents and SettingsRakesh", which has many .xls files. Each file has a sheet called 'Cover Note'. I want to copy cells B2, C2, D4 and F3 from 'Cover Note' of each file.
These cells should be pasted in the current sheet, one row for each file. First cell of each row should have the source file name.
It would be better if macro can prompt to select the directory where ther source files resides.
I have a dropdownmanu in sheet1 with different countries taken from Column A in Sheet3. I need a macro to run when i select a country example Denmark. It will fill out transmittal code and also country code in named cells for it in sheet1. Info taken from Sheet3
Transmittal code is in below testsheet in Sheet1 cell E12.
Country code is in Sheet1 cell.
But this have to be possible to change. Also the range for the country have to be possible to change.
This vba code i need to run as soon as i select a country in the dropdown manu.
But one thing i would like to solve also is. When i select a country it will create a dropdownlist in I13 taken from the info in column, i have in Sheet3 column F. So if i select example Denmark, it will show a dropdown menu in sheet1 I13, with the ledger codes 10 and 6x. I have tried to make this work but cant make it work good.
I use excel 2003. Please have a look and upload the testsheet back.
I am using this code to hide or unhide rows of text on another sheet:
VB: Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String Dim sValue As String
'Get the address of the cell that changed without '$' signs sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB: If Target.Value = "Not Pursuing" Then ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
I have a macro that is copies and pastes data from one area to another. When it is finished it currently leaves the cell range on sheet it copied from selected. I would like to have it deselect that range of cells and return the sheet to cell A1. Basicaly what i want is for it to perform the same operation as hitting Esc.
I've got this simple code which copies an entire sheet to another sheet. What can I do so the sheet being copied will not stay selected after the copy has been done.
I can't seem to get my listbox to deselect an item. When the user clicks on a day of the week in the listbox, they are given a yes/no option to print the sheets for the day selected. If they select no and change their mind, they cannot click on the same day of the week without first cancelling the listbox and re-opening it.
Private Sub UserForm_Initialize() Dim myarray As Variant myarray = Split("Monday|Tuesday|Wednesday|Thursday|Friday|Saturday|Sunday", "|") ListBox1.List = myarray End Sub
Private Sub ListBox1_Click() Call PrintRoutine(ListBox1.Value) End Sub....................
I have a userform that has a listview in it. In the listview i have bunch of icons with names. I have it where if you double click on the icon, you will see a msg. box which you need to press ok and the box will go away. After you press ok the icon is still selected. I would like to be able to deselect the icon when you click on the listview box (in the white space away from the icon). I tried everything and no matter what i do, I cant deselect the icon. It is either highlighted or has a outline around it (little dots around the icon). This means that i can double click anywhere in the listview box and the and the msg. box will pop up.
All I want is when i double click the item, the msg. box should come up and when I click away from the icon (click in the white space) the icon should be completely deselected.
