I am trying to write a macro to do the following:
Search column "I" for blank cells. If one is found then all adjacent cells to the left in that row are shifted to the right by one. (in other words for that row cells A-H are shifted right to become cells B-I).
Search column "I" for blank cells. If one is found then all adjacent cells to the left in that row are shifted to the right by one. (in other words for that row cells A-H are shifted right to become cells B-I).
View 2 Replies View RelatedI have tried several methods to delete the entire row if the cell in column 'A' is blank ...
View 9 Replies View RelatedWhat I'd like to do is; If column C contains data then insert a blank column and shift column C to the right.
View 4 Replies View RelatedSo this is what I am trying to do, I have a column in my data that is for telephone numbers. When I receive the file some of the fields are blank in that column. I need to add to my current macro a part that evaluates the column for blanks and adds a static telephone number in the blanks (up to the last row of data in the file). I have been able to accomplish this with the following:
Range("N2").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.SpecialCells(xlCellTypeBlanks).Select
Selection.FormulaR1C1 = "1112223333"
However, when the file that I receive has a telephone number in all the fields the code breaks at this point. I have tried On Error Resume Next, but that just replaces all the remaining cells in the column with the static 1112223333..
How do I shift all the cells up labelled data, so that there are no blank rows in between? I tried using the ones found on the forum via search but it is stuck in an infinite loop.
View 5 Replies View RelatedThe below code is what I have and it works but what I need is for it to loop until it doesn't delete anything. How can this be done?
View 2 Replies View Relatedi want to delete entire row if Column C2:C1000 are blank
e.g if range c2:c100 have data then delete the rows C101:C1000
I am using the following macro to delete "completely empty" rows. I also need to delete some rows if a cell in column B has no value. How would I change this macro?
' DeleteBlankRows
Dim r As Long
Dim C As Range
Dim Rng As Range
On Error GoTo EndMacro
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
If Selection.Rows.Count > 1 Then
Set Rng = Selection
Else
Set Rng = ActiveSheet.UsedRange.Rows
End If
For r = Rng.Rows.Count To 1 Step -1
If Application.WorksheetFunction.CountA(Rng.Rows(r).EntireRow) = 0 Then
ActiveSheet.Rows(r).EntireRow.Delete
End If
Next r
EndMacro:
Is there a way to delete any text or formula from an entire row, based on column A? In my spread sheet I have multiple rows where column A is blank, but column's F, G, and H have formulas in them. I would like to use VB or any other method that would be best to clear the contents of all the rows where column A is blank.
View 6 Replies View RelatedIf cells in column A3:A10000 are blank / unpopulated I would like to delete the blank rows.
View 6 Replies View RelatedI need to shift all the cells in columns B, C, D, E & F up a row to align with the names in column A.
I have code to delete the empty rows.
Start:
Bank Holiday 1 on a Week End
ABCDEF1YASMIN AKHTAR (YA1) 2 59038.753MARINA BELAIDI (MB2) 4 12325.55MARGARET CANT (MC6) 6 33002.25
Result Required:
Bank Holiday 1 on a Week End
ABCDEF1YASMIN AKHTAR (YA1)59038.752 3MARINA BELAIDI (MB2)12325.54 5MARGARET CANT (MC6)33002.25
I am trying to come up with a code that will copy column A entirely, and insert the copied cells into the first blank column. In the columns with information in them, there will always be text in the first cell, so that can be used as the test to find the first blank column, but I'm not sure how to get this done for my macro.
View 12 Replies View RelatedI'm looking for a VBA/Macro for delete the entire row if a particular column formula result is zero/blank.
View 1 Replies View RelatedI am looking for a macro that can delete whole rows (shift cells up then). How i would like it to perform is if there is nothing in cell(s) B then delete the whole row?
View 9 Replies View RelatedI want to be able to insert-shift cells down based on criteria in another cell. For instance, I would like a macro that would look at column B for saturday and sunday and then insert-shift cells down on the corresponding cells in column D...
View 9 Replies View Relatedi want to delete entire blank row from column C2:C300 i mean if i have data c2:c100 then c101:c300 delete entire blank rows
View 4 Replies View RelatedI've attached the sheet I'm working with. I need to delete most of column F and shift the rows to the left, but when I delete the cells it doesn't give me a prompt to shift the row, it just deletes the entire column or individual row. I need them to shift, what can I do?
Attached File : Coordinators Test.xlsx
When I try to insert a row, Excel displays the warning "cannot shift nonblank cells off the worksheet". I understand what the warning means but there are no nonblank cells at the bottom of my worksheet! Just to be sure, I have selected the bottom-most rows, cleared them, deleted them, and everything else I can think of. The warning still appears.
View 3 Replies View RelatedWant to look in one column and find the first non-blank numerical value, then have it return a value from another column.
Used to nest multiple IF functions together from different cells, but it seems overly complicated and time consuming. Sometimes I have over 30 cells to check.
For example, if Column A contains weekly sales data by week, entered weekly, and Column E has corresponding comparison data from the previous year. I want to enter a formula to check the first row that has sales data entered and have it match up the comparison value in the other column.
I would like to create a macro to search all blank cells within a certain range in multiple worksheets to replace it with a certain blank cell. Essentially i would like to use a special values function to do this.
View 6 Replies View RelatedI need my macros to search for the word "Cancel" or "Cancelled" in columns "T" and "U". Once found, I need the macros to make that entire row an opaque shading.
There will be other wording in these cells that contain "Cancel" or "Cancelled". Is it possible for the macros to search in the sentence and find the words "Cancel" or "Cancelled"
I started on the code below but am stuck.
I am looking for a formula that will search a range on multiple worksheets for the FIRST blank cell and then make that cell the current active cell.
View 9 Replies View RelatedIn my current sheet, I have a button which pastes the contents of the user's clipboard into cell A20. The data that is being pasted is a simple, single-column range of data that may or my not contain blank cells. When this button is clicked, the user's clipboard should already have data.
Some of these pasted ranges may go from A20:A40, A20:A60, or even A20:A73. The point is, the length of the pasted information is variable.
I am looking for VBA code which can look at the recently pasted range in A20:AX, find blank cells, and remove them. Here is my current code (very simple), which is only the paste function:
VB:
Sub admin_btnPASTE()
' paste_align Macro
' pastes data
On Error Goto Whoa
[Code]....
I have created one excel which contains column with range. (A1:A6). and the drop box included the values as Passed, failed, NA, NC) i have coded the the macro to change color as if i select passed from A1 then A1: F1 will be Red. please find the below code.
Sub Prasanna1()
Range("A1").Select
Select Case Range("A1").Value
Case "Prasanna"
Range("A1:F1").Interior.ColorIndex = 7
Case "Kale"
Range("A1:F1").Interior.ColorIndex = 0
[Code]...
The code is working fine for one row. Now i want to set the same code for entire column A. as if i will select A10 the same range of row should get change with fill color.
know the keybaord shortcut to select a range? Indeed, how can i trick excel to use CTRL SHIFT Down in a range with blank data and to select the last data in the range?
View 1 Replies View RelatedI recored a macro to Cut the entire "E" column and paste on "A". For some reason when i read the code it doesnt capture the part where it needs to paste it in column "A".
View 1 Replies View RelatedI have Excel 2002. I need to create a formula that will move an entire row to another page within the same workbook if a cell in that row has a certain value. Example would be if A1 cell in the row has a value of 111 I need to move the entire row to another page. I could use the sort then cut function in a macro but the spread sheet I'm working with changes daily. One day there will be 10 A1 cells with 111 the next 30 cells with 111 in A1 and some days no cells with 111.
View 4 Replies View RelatedI've been working on a macro which delivers a daily report. the report is made up of 4 sections (received orders, scheduled orders, pending orders and unusual orders) each section is topped by a title which is a merge of all columns (A through I) the problem I am having is that the first column displays case numbers (to be displayed in text or number formats) and the 7th and 8th columns are dates When I try to have the VBA select the first column to format as a number, it will select all columns due to the merged cells is there a way to format only non-merged cells of a columns
This is the section I currently use for formatting but it doesn't actually work, (everything ends up in a date format)
[Code] .......
I need automatically deleting of whole row based on cell value, if value of cell which is in h:mm format, is less than or equal to 2:00 (h:mm)
So far I got.
Code:
Sub FillDownFormula()
Code:
Range("L2").Formula = "=RC[-3]-RC[-2]"
Range("L3").Select
Columns("l:l").Select
Selection.NumberFormat = "h:mm"
Dim rng As Range
[Code] .........