Shift Cells Up A Row To Align With Column Using VBA
Jan 13, 2012
I need to shift all the cells in columns B, C, D, E & F up a row to align with the names in column A.
I have code to delete the empty rows.
Start:
Bank Holiday 1 on a Week End
ABCDEF1YASMIN AKHTAR (YA1) 2 59038.753MARINA BELAIDI (MB2) 4 12325.55MARGARET CANT (MC6) 6 33002.25
Result Required:
Bank Holiday 1 on a Week End
ABCDEF1YASMIN AKHTAR (YA1)59038.752 3MARINA BELAIDI (MB2)12325.54 5MARGARET CANT (MC6)33002.25
View 3 Replies
ADVERTISEMENT
Feb 22, 2013
I've attached the sheet I'm working with. I need to delete most of column F and shift the rows to the left, but when I delete the cells it doesn't give me a prompt to shift the row, it just deletes the entire column or individual row. I need them to shift, what can I do?
Attached File : Coordinators Test.xlsx
View 3 Replies
View Related
Jul 12, 2006
When I try to insert a row, Excel displays the warning "cannot shift nonblank cells off the worksheet". I understand what the warning means but there are no nonblank cells at the bottom of my worksheet! Just to be sure, I have selected the bottom-most rows, cleared them, deleted them, and everything else I can think of. The warning still appears.
View 3 Replies
View Related
Nov 2, 2008
I am trying to write a macro to do the following:
Search column "I" for blank cells. If one is found then all adjacent cells to the left in that row are shifted to the right by one. (in other words for that row cells A-H are shifted right to become cells B-I).
View 3 Replies
View Related
Nov 2, 2008
Search column "I" for blank cells. If one is found then all adjacent cells to the left in that row are shifted to the right by one. (in other words for that row cells A-H are shifted right to become cells B-I).
View 2 Replies
View Related
Jul 18, 2014
I am trying to align a picture on the right of my worksheet. The far right column changes depending on user selections from a userform.
I am using
ActiveSheet.Shapes("Picture 1").Top = Range("J2").Top
to align the top
I did find code to align to the left, but right doesn't seem to be valid.
View 4 Replies
View Related
Apr 22, 2009
What I'd like to do is; If column C contains data then insert a blank column and shift column C to the right.
View 4 Replies
View Related
Dec 17, 2009
I have a task that I need to perform every now and then. And even though I normally find my ways around in Excel, I can't find a working solution for this one.
I have a list of features that I need to match with another list and place them on the same rows in my sheet. The attached file contains 2 worksheets where "Before" shows my normal input, and "Wanted" shows what I need to do.
Cols A-E contains info for the first set of features, cols G and H is the cells I want to move. Please note that sometimes the G and H columns contains info that are not present in A-E, and then I need to move those features around as well. An example is present at the bottom of the "Wanted" sheet.
View 9 Replies
View Related
Mar 14, 2008
Here's a weird one: I can't get some of my cells to align to center/left/right. Both the buttons on the toolbar and Format->Cells->Alignment won't work. The kicker is that other cells on the same sheet will center/left/right just fine. Is there some kind of formatting protection I inadvertently set?
fyi, Excel 2003 on XP Pro, all fully updated.
View 9 Replies
View Related
Apr 16, 2009
Is there a way where i can have the figures in Red align with the corresponding description.
As it is when i run my report the account code will come on top of the description and i want to find a way to align them in the yellow cells.
View 6 Replies
View Related
May 22, 2014
I have a list similar to the one below. I need to compare four columns against each other and align matches alphabetically.
This is the data:
Nov
Dec
Jan
Feb
[Code].....
I tried using VLOOKUP but I can't figure out how to get it to return what I want in the format I want it.
View 2 Replies
View Related
Feb 22, 2008
I know how to center text from left to right, but how about from top to bottom?
View 3 Replies
View Related
Dec 1, 2009
I have the basics set up, but need to work out how to make it calculate my pay per shift dependant on the type of shift i have worked.
I have attached a screen shot of the current page,
In it i have currently used validation drop boxes for the location and worked columns with tables just to one side of the sheet.
The shift pay is the column i am having trouble with.
I would like it to change dependant on what is selected in the 'worked' column.
For most things it should just display basic plus holiday, however if supervisor is selcted in the work column, it should display basic plus holiday plus supervisor.
View 3 Replies
View Related
Apr 11, 2008
a person works for certain hours and get paid according to the hours worked either by day or by night or a mix of both. Day payment is $8 when worked between 08:00 and 19:59 , night payment is $12 when worked between 20:00 and 07:59. The excel cell are formatted as datetime with yyyy-mm-dd hh:mm , the function works fine in getting the time information and checking whether the whole work is all day or all night , yet the if-then-else statements for calculation seems to be wrong!!
examples:
start = 2008-01-01 09:15 , end = 2008-01-01 11:40 , all day as it is between 08:00 and 20:00 and cost = 8/hr = 19.333
start = 2008-01-03 21:05 , end = 2008-01-04 02:05 , all night as it is between 20:00 and 08:00 and cost = 12/hr = 60.000
start = 2008-02-02 19:00 , end = 2008-02-02 20:05 , cost = 9.000 as 1 hour day = 8.000 plus 5minutes night = 1.000
Function prod(st As Date, en As Date) As Double
Dim shour As Integer
Dim smin As Integer
Dim ehour As Integer
Dim emin As Integer
Dim stod As String
Dim etod As String
pday = 8
pnight = 12
shour = Hour(st)
smin = Minute(st) + shour * 60
If (shour >= 8 & shour < 20) Then
stod = "day"
Else
stod = "night"
End If
ehour = Hour(en)
emin = Minute(en) + ehour * 60
If (ehour >= 8 & ehour < 20) Then.................
View 8 Replies
View Related
Apr 12, 2007
i am using the code posted by Reafidy on [html] http://www.ozgrid.com/forum/showthread.php?t=62708[/html] to create a list of all possible combinations. The only problem i have is that sometimes the total no. of combinations exceed the excel row limit of approx 65,536. once the row limit in column 1 exceeds 65k, the remaining combinations automatically shift on column 2 and then on 3 n so on.
View 6 Replies
View Related
Jan 23, 2009
I have 10 columns that are as follows. Name, rank 04, name, rank 05, name, rank 06, name, rank 07, name, rank 08. The longest name and rank list is over 1200 names long. What I need to do is create 1, 3, and 5 year averages based on rank.
My question is, is there a way to sort alphabetically that will automatically align column a,c,e,g,and i alphabetically that will also align each row by name.
example:
name 04 05 06
joe 75 72
paul 82
carl 72 48
Joe isn't present in 05, Paul isn't present in 04 or 06, and Carl isn't present in 06.
Basically I need excel to add blank cells for people not on each years list so all names align.
View 11 Replies
View Related
Apr 25, 2013
I have a macro that converts all my PDF Purchase Orders to a text file and inserts the data/text horizontally into another document. However because the PDF's or the text within the PDF can be fomatted differently (that is on different lines etc) it therefore imports the information and it looks mis-aligned.I have attached a simple spreadsheet showing some sample text as it is imported and then below this how it should look like, all in line.
The range where the highlighted text in red is, is variable (but say nothing more than a variant of 10 columns). The text can also be Uppercase or Lowercase.So, I was wondering if there is macro code to find the "text" on various rows/columns and align it all in another column?
View 2 Replies
View Related
Aug 11, 2014
I've got the following code and have been trying to make the cells in column 1 align TOP LEFT but haven't been able to.
[Code] .......
View 2 Replies
View Related
May 15, 2014
How would write a macro that would delete a row and shift up if they have a value in Column A?
View 6 Replies
View Related
Jul 23, 2013
I need a macro which will manipulate my data like this:
If a blank cell is found in column C, then I'd like to have the contents of that row in column D shifted to the right.
View 1 Replies
View Related
Sep 14, 2007
I wanna shift a particular column (lets say column A) to the left, so I do the following:
hojaFAC.Columns("A:A").Select
Selection.Insert Shift:=xlToLeft
hojaFAC is a worksheet
BUT I get the next error when I execute my macro :
RUNTIME ERROR 1004
Select method of range class failed
Why do I get runtime error nš 1004 all the time also for other reasons. I think itīs the only runtime error I ever jumped into. But If I ever get a runtime error It's allways number 1004.
View 4 Replies
View Related
Aug 18, 2014
Any shortcut for "insert cut cells"? I want to paste and shift cells down instead of pasting over existing data.
View 1 Replies
View Related
Nov 7, 2009
I have data in cells A1:FM1326 I want to delete all of the cells that say FALSE and shift the remaining cells up.
View 5 Replies
View Related
Feb 6, 2007
I have a problem in making a delete function/sub and i'm applying it to a listbox in userform ... i'm trying to delete a row of data in the listbox which refers to cells (A12:D12) ... and at the same row (row=12), there are other data cells (E12:H12) ... after deleting the cells all other data below the deleted cells will shift up taking over the deleted cells ...
View 9 Replies
View Related
Feb 6, 2009
If I put a length in (G13) such as 4.44 & position from (H13) is 1. Then I want that length of (G13) to move its value (4.44) into (C15) the 1st cell to add to is (C15)
Then Move (C15) to (C16) 11.12 becomes C16
and move (C16) to (C17) and so on all the way down the C column.
When it hits the last joint (C374) position 360. I want a messageBox that says you can not insert anymore.
Basically shift the existing values down untill (C374)
I have only column C to shift the calue from (G13)
I do NOT want to delete rows!
Below is how it looks before macro:
GH12LENGTHPOSITION134.441
C14LENGTH1511.121612.221711.561811.861913.112012.872113.062211.992312.03
Below is how it will look after macro: The RED moves to (C15)
C14LENGTH154.441611.121712.221811.561911.862013.112112.872213.062311.992412.03GH12LENGTHPOSITION134.441..........................
View 9 Replies
View Related
Apr 30, 2009
how can i get this
Sheet1
ABCDEFGHIJKL7WTXMF31326154RIO TINTOAUDMLWSINBFSALE 258414.13 ML W/S INT BD FD 16-Mar-0917-Mar-09-251307.75N
View 9 Replies
View Related
Oct 20, 2009
Whenever "online" appears in the "Desc" column I need to shift the matching row down (shaded area). for example, "online" appears in H2, hence, C2:E2 need to be shifted down to C3:E3 leaving C2:E2 blank. Next, H3 has "online" there, C3:E3 need to be shifted down one row so the result will look like the data on the "result" tab.
View 5 Replies
View Related
Jan 30, 2013
I am trying to delete a group of four cells and have the remaining block shift up. My code is below and crashes on the red. What is the right code to get this to work?
Code:
Do
ActiveCell.Offset(1, 0).Select
If ActiveCell.Value = Range("G1").Value Then
Range(ActiveCell:ActiveCell.Resize(0, 3)).Delete Shift:=xlUp
Exit Do
End If
Loop
View 1 Replies
View Related
Sep 25, 2013
I'm using a macro to copy cells (2 columns and between 1 and 5 rows [19 - 23 on s/s]) from one workbook to another but if I use
Rows("2:2").Select
Selection.Insert Shift:=xlDown
then every cell in the inserted rows are populated.
this is what I currently have
Windows("agent master.xlsm").Activate
Range("B19:C23").Select
Selection.Copy
Windows("distribution master.xlsm").Activate
Sheets("L38").Select
Range("A2").Select
Selection.Insert Shift:=xlDown
Application.CutCopyMode = False
but that doesnt work either. It just gives me an empty cell in A2.
View 1 Replies
View Related
Jul 1, 2007
I am looking for a macro that can delete whole rows (shift cells up then). How i would like it to perform is if there is nothing in cell(s) B then delete the whole row?
View 9 Replies
View Related
