Is is possible to Cerate a ListBox in a Macro based on the following Vlookup
=IF($E$14="","",VLOOKUP($E$14,List!$M$2:$N$5,2,FALSE))
Have it pause for the users selection and return the correct value to E14 in the current worksheet?
How can I get the results, not in column D but in a textbox,so I can choose one of the
names from that text box?
Sub concatvals()
Dim strvalue As String
Dim strsearch As String
strsearch = InputBox("What Number do you want :?")
For Each c In Range("A1:A100")
If c.Value = strsearch Then
If Len(strvalue) < 1 Then
strvalue = c.Offset(0, 1).Value
Else
strvalue = strvalue & ", " & c.Offset(0, 1).Value
End If
End If
Next
Range("D1").Value = strvalue
End Sub
how the code to make a listbox.. The code I have in Excel VB is as shows... I want the function_code to be shown as a listbox!
Sub Get_Category()
resrow = 3 'börjar vid cell 3,2
rescol = 2
Sheets("sheet1").Range("b2:j1000").ClearContents
OpenConnection ("RFC")
I made an excel MAcro Sheet as I am not good in macros. How to make a columns in list box via text boxes in userforms.
View 2 Replies View RelatedI have this formula "=VLOOKUP(B5,$F$254:$G$258,2,FALSE)" I want it to return a "0" when cell B5 is not populated. How could I do that? Right now it returns "#N/A" and messes up my math down the sheet..
View 3 Replies View RelatedI have this code which looks information in a table. The problem is that the table is getting every time bigger.
Here the code:
VB:
With Worksheets("Sheet10").Cells(9, 3).Resize(, LastColumnf - 2)
.Formula = "=IFERROR(CONCATENATE(VLOOKUP(Sheet10!C2,Sheet12!$A$10:$C$550,3,FALSE),""."",
VLOOKUP(Sheet10!C2,Sheet12!$A$10:$C$550,2,FALSE)),"""")"
.Value = .Value
End With
How can I write $A$10:LastNewRow... Another problem rises here, LastNewRow might end up being the oldLastNewRow, i think. But maybe since it is getting bigger, there is no problem, I don't know.
Instead of having a static reference like $C$550 I would like to have a dynamic one.
It doesn't encompass the full spectrum of what I am hoping to have on this timesheet.
For some reason - when I select "REB (0730-1600)", it comes up to 9 hours and not 8.5 hours.
And I cannot have a =SUM column. My goal was to select a shift (Cell 5), it automatically input the hours worked (Cell 7), and then somewhere formulate a total for the week.
Hello there,
I am making a spreadsheet that tracks children's progress in school through the year.
I have a vlookup that turns their levels (2c,2b,2a,3c,3b,3a etc) into numbers so that the number of sublevels they have progressed during the year can be reported.
=IF(ISNA(VLOOKUP(E5,$AD$10:$AE$28,2,FALSE)),"0",VLOOKUP(E5,$AD$10:$AE$28,2,FALSE))
However, when children join through the year, they will not have data to go in the 'starting grade' box, so I was wondering if it would be possible to make vlookup see that cell E5 is empty, and so look in cell F5 instead. It might even, perhaps, have to look in cell G5 if they join the class after Christmas.
This is how my pivot table would look like to start. Over time I would refresh and more things will be added. I want to make a Pie chart, and everytime I refresh the Pivot I want the Pie to get updated.
[IMG][/IMG]
BUT I want to do this on a separate tab. So basically I want to do a Vlookup of sorts. Where all the Fruit items are pulled and automatically updated when I refresh the Pivot. Then I would do the same for Veggies.
I need to run a vlookup to find some data. But I have a lot of data about 600,000 lines. Currently this list is spread over several columns (as the limit is something like 50000). How can I make my reference range access multiple columns?
View 5 Replies View RelatedI have two lists mainly TV Brand & There Models.
List 1 (TV Brand)
Sony
LG
Samsung
Depended List 2 (Models)
Sony LG Samsung
EX420 55EB9600 PL43E450A1FXZP
EX430 77EC9800 PL43E490B4FXZP
EX550 55EA8800 PL43E400U1FXZP
EX520 KN55S9C UN32EH5300FXZP
EX645 55EA9800 PL64E8000GFXZP
I'm using two Listboxes (Form Control) with multiple selection options namely Listbox 1 (Brand) & Listbox 2 (Models). I want listbox 2 input range to be depended on selection made on Listbox 1 (Brand). For example, if user selects Sony then box2 should show only Sony's models and if user selects Sony & LG, box2 should show models for both Sony & LG.
I have a userform where I can select multiple items in a listbox and add them to another. I also have the ability to filter the first listbox to make finding items easier. The issue I am having concerns the clear filter button. As currently designed, the clear filter button will reset the initial listbox back to its default values. Ideally, I would like it to reset to the default values excluding those values that currently in the second listbox.
The entire code is below for reference, but it's the sub ClearFilter_Click that I am struggling with.
[Code] ....
im trying to create a two column listbox that will transfer both columns to the listbox on the right and also transfer from the right to left currently right to left works but when I trasnfer from the left to right then the right to left only one column is moved.
View 4 Replies View RelatedI have two sheets and two listbox's(ColumnCount8) and one command button.
lstInYard rowsource is set to sheet1
lstMilled rowsorce is set to sheet3
Iam trying to cut and paste the selections in lstInYard to lstMilled as well as the corrosponding row values in sheet1 to sheet3 by using cmdMoveSelected click event.
I have a spreadsheet on sheet 1 with a list of customers and their information. So on column A I have the customer number (i.e. k968, e37, p528,...), on column B i have the customer's name, on column C the street's name, on Column D the house number, on column E the zip code and finally the city on column F.
Right now there are around 600 customers in this list.
I have made a userform with a combobox in which I want to select an existing customer (pulled from the spreadsheet). On the same userform I have textboxes (customer number, name, street, number, zip, city). When I select a customer in the combobox, I want this customer's info to show up in the textboxes. I want to be able to change the info and hit Next to store the changes in the spreadsheet. When I do not select a customer from the combobox, I want to add new info in the textboxes and hit Next to store this info as a new customer. The userform also has a delete button. Then I select a customer in the combobox, this customer (and it's info) should be deleted from the spreadsheet when i hit Delete. So the spreadsheet is variable in length.
I need to figure a way to make to cells with dates equal each other if the
day,month and year are the same but are placed into a cell at different times during the day. "Making Date Now () = (06/29/09) In another cell". Therefore, A1= Now() and E11 = 06/29/09
I have 2 userforms. UF1 and UF2. UF2 has a rowsource set to its Listbox. UF1 has a search function that searches the original sheet. Now I want to double click on an entry in UF1's Listbox and select the same entry in UF2's Listbox. I want to then work with that entry in UF2.
[Code].....
I do all of this to circumvent Excels restriction. I can't search in a rowsource Listbox, but any edits done to my new Listbox wouldn't be made to the Excel sheet.
I have the following sheet which functions as a table to store values for files that have been created using the application which this table is in. In this app., I have a form with 2 listboxes. When the form loads, I have the first listbox list values which each of these files are listed under (i.e. - "sub-directories"). With a selection of one of the list values and clicking of a button, I want the second list box to list the values of cells listed in a range directly below where the selected value in the first listbox came from.
I'd prefer, in the first listbox, to have only the values of the ranges that have a value in them in the listbox. However, this would cause my listbox.selected(array) not function properly. But since my current offsets (in the second sub) do not seem to be working anyway, maybe I am going about this totally wrong.
The following line highlights the first selection in the listbox visible and calls the listbox click event
myListbox.Selected(0) = True
myVal = myListbox.Value 'after this line executes, instead of being set to the actual first value in myListbox, myVal is ""
Why is myVal not set to the first selection in the listbox? After I execute the following code, myListbox.Value still equals "" and not "Counter 1".
myListbox.Value = "Counter 1"
Why can I not set myListbox.Value?
I have 1 listbox (lisbox1) that retrieve it's list items from a worksheet range (imported/database query from access). This works fine.
I have a second listbox (listbox2) that should display results from clicking a value in listbox1.
Listbox1 contains companynames (1 column), listbox2 needs to be populated with quotes.
Range A3:D4800 contains company ID's, Company names, Quote Numbers. When I select a company name in listbox1, I need listbox2 to be populated with all quotes for that company.
I have tried (using vba) to do a vlookup using the listbox1 value, but I cannot seem to figure out how to populate listbox2 with "all" quotes. I get 1 quote and that's it. I realize I probably need to have the vlookup loop through each cell in the range to find the value, but when I try this, I get a type mismatch when using the .additem (only for the 2nd and subsequent passes).
I cannot find this information anywhere else in this forum...
Does anybody know how to transfer an item from one list box to another using code, on the click of a button.
The list box with the information in is called 'Team_ListBox'The list box i am wanting to transfer to is called 'Starting_Team_ListBox'The button to do this task is called 'AddPlayer_team_Btn'
I have two listboxes on a userform. One is the "choice" listbox, the other is the "master" listbox. Each item selected is a billing object on a sales invoice.
problem: The master list works fine when the item is selected in the choice list. But when it is deselected, how can you REMOVE it from the master list? question: How can I add a text box automatically to the userform to allow the user to enter quantity info?
For I = 0 To CodeList.ListCount - 1
If CodeList.Selected(I) = True Then
obj = CodeList.Column(0, I)
p = 6
test = 0
Do While test = 0 And p <= 25
If sheetsales. Range("C" & p) = obj Then
test = 1
Else
test = 0
End If
p = p + 1
Loop
If test = 0 Then.........................
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
I have a sheet using VLookup to find EMail and Web addresses. I can get the address to show up but not as an active URL address. Is it possible to have the address "active" so I can click on it and activate the EMail or Web Site?
View 5 Replies View RelatedI'm trying to do a Vlookup on a file that gets automatically downloaded to the computer from a website. The data is in lots of different data sets, like so:
Loans to countries
Mar
Apr
May
Jun
Loans to banks
Mar
Apr
May
Jun
Every month a new row of data gets added to each table, meaning the start and end cells of the array also shift each time.
I'm currently trying to vlookup the same data from 2 different sheets. Here is the code i've tried.
View 4 Replies View RelatedI’m trying to develop a workbook which holds monthly data on loan information. It tracks the interest and balance on the loan. I want the first page to have a table displaying the interest payments for every individual tab. When I was brainstorming the idea, I was considering a sort of Vlookup function to find the tab the account is on and then a further function, possibly another vlookup which connects the month to that month’s interest payment. Can anyone help me figure this out?
The attached spreadsheet is obviously simplified, there are well over 30 tabs. But I would like it to, ideally, search the account number column, search the workbook for that account number, and then when on that page use the month at the top of the first page and retrieve the interest payment and put it back in the cell. It’d also be great if the formula can be transferred between workbooks. I’m not sure if that makes sense; basically if I were to copy that worksheet into the next months book, I would like that the formula read those tabs instead of becoming obsolete due to references from the first workbook.
I have data in a pivottable which I want to compare with another table. The lastcolumn+1 of the pivottable needs to get data from another table. I have this for an example:
View 5 Replies View RelatedI have a spreadsheet (Need Data.xls) that needs to be filled out with a couple columns of data.
This data lays within 338 spreadsheets which have many items and may only have 2, or 3, or 50 that belong on my Need Data.xls spreadsheet.
I have a tab in Need Data.xls named "DIR" which has a list of 336 excel files that need to vlookup'd into.(not a separate file) They're all setup with this format:
I am receiving a run-time error with following code. The error message is "unable to get the VLookup property of the WorksheetFunction class". I only receive the message when the lookup value is not found in the table.
I thought adding the "False" command at the end would return an "N/A" but it didn't. Is there anything I can add to avoid this error?