I have two sheets and two listbox's(ColumnCount8) and one command button.
lstInYard rowsource is set to sheet1
lstMilled rowsorce is set to sheet3
Iam trying to cut and paste the selections in lstInYard to lstMilled as well as the corrosponding row values in sheet1 to sheet3 by using cmdMoveSelected click event.
I'm trying to Filter a list by the criteria selected in a listbox, and activated by a command button. My problem is the sort criteria. I have 11 regions, numbered 01EPS through 11EPS. Sorting by any of these criteria works just fine.
The problem is that I also want to be able to sort by ALL of the regions at once. I can do this by using a custom filter. I recorded a macro to see what the difference was, and it simply a matter of changing 01EPS to "=*EPS". However, adding that to my case list results in an error message of "Compile Error: Syntax Error".
I am reading info from a sheet via array into a listbox which displays the results on a user form. One of the columns has a long text and I need to wrap the text.
From my searches I think I need to have an actove x listbox.
I have right clicked on the toolbox but can not see one with the name for active x lisrbox.
what one I should select and if possible how to set it up to wrap the text.
How can I move an item in a Listbox up or down. This is how the listbox is populated:
Code:
Private Sub UserForm_Initialize()
Dim lbtarget As MSForms.ListBox
Dim rngSource As Range
[Code].....
I have a list of items across 4 rows. It is a single select, not a multi-select list.
Row 1 is a Unique ID (1 to nth), Row 2 is a description, Row 3 is a Number Value for one requirement and Row 4 is a number value for another requirement. I have a listbox which captures the range and displays the data in a multi-column format. I want the user to have the ability to move records up or down in the order. I know you can do this for individual items in a colum using list index, but list index does not like to capture rows.
Is it possible to have a listbox with each line with a different colour?
View 2 Replies View RelatedI have two lists mainly TV Brand & There Models.
List 1 (TV Brand)
Sony
LG
Samsung
Depended List 2 (Models)
Sony LG Samsung
EX420 55EB9600 PL43E450A1FXZP
EX430 77EC9800 PL43E490B4FXZP
EX550 55EA8800 PL43E400U1FXZP
EX520 KN55S9C UN32EH5300FXZP
EX645 55EA9800 PL64E8000GFXZP
I'm using two Listboxes (Form Control) with multiple selection options namely Listbox 1 (Brand) & Listbox 2 (Models). I want listbox 2 input range to be depended on selection made on Listbox 1 (Brand). For example, if user selects Sony then box2 should show only Sony's models and if user selects Sony & LG, box2 should show models for both Sony & LG.
I have a userform where I can select multiple items in a listbox and add them to another. I also have the ability to filter the first listbox to make finding items easier. The issue I am having concerns the clear filter button. As currently designed, the clear filter button will reset the initial listbox back to its default values. Ideally, I would like it to reset to the default values excluding those values that currently in the second listbox.
The entire code is below for reference, but it's the sub ClearFilter_Click that I am struggling with.
[Code] ....
I have listbox of information set up to have a user choose several items. I want the items to then transfer to another worksheet. I am using the code I found here:
Private Sub CommandButton2_Click()
Dim lItem As Long
For lItem = 0 To ListBox1.ListCount - 1
If ListBox1.Selected(lItem) = True Then
Sheet2. Range("A65536").End(xlUp)(2, 1) = ListBox1.List(lItem)
ListBox1.Selected(lItem) = False
End If
Next
End Sub
But it is only moving The first item in a column, instead of all the columns of information. What do i do to get it to move all the information??
The following code populates a forms' second listbox (Elements_lbx) with True. No amount of diddling (by me) can get the selected items from form's first listbox (Content_lbx) moved over to the second. (NB. the list box isn't the standard VBA listbox but an open source: ListEX from Marco Bellinaso.)
Private Sub CommandButton2_Click()
Dim lbx_Sel As Long
' loops through ListBox to test if it is selected
For lbx_Sel = 0 To Content_lbx.ListCount - 1
If Content_lbx.Selected(lbx_Sel) = True Then
Me.Elements_lbx.AddItem Me.Content_lbx.Selected(lbx_Sel)
'
'Clear the selected item
Content_lbx.Selected(lbx_Sel) = False
End If
Next
End Sub
im trying to create a two column listbox that will transfer both columns to the listbox on the right and also transfer from the right to left currently right to left works but when I trasnfer from the left to right then the right to left only one column is moved.
View 4 Replies View RelatedI have a userform in excel....the listbox "listbox1" has over 1000 items....and i have a label "label5" also.
What i want is if I select for example 10 items from the listbox1 to be shown in the label5 directly....and of course if i select or deselect any item will be applied in the label
For example...selected items from listbox are;
5
6
7
8
9
the label will show me the same
5
6
7
8
9
Code while noting that the list box has many columns...so i want to select which column to be appeared in label.
I want to be able to have a listbox on a sheet (whether this is already on the sheet or created by a macro I don't care), and have a button next to it. Once the list box has been filled in (with multiple selections) I want the user to press the button, the list box and button disappears and the items selected in the list box are placed into consecutive cells underneath each other.
First problem: To start with I have tried to create the listbox and button using VB
Sub lbtest()
Dim lb As Object, ButCon As Object
Set lb = Sheets("Sheet1").Shapes.AddFormControl(xlListBox, 100, 100, 150, 100)
lb.ControlFormat.MultiSelect = xlSimple
lb.ControlFormat.ListFillRange = "M1:M8"
Set ButCon = Sheets("Sheet1").Shapes.AddFormControl(xlButtonControl, 255, 100, 100, 25)
With ButCon
.OnAction = "Inactive"
.PrintObject = False
End With
I'm making a Userform for commands I use a lot, like concatenation and highlighting cells. I placed a command button on the sheet that pops up whenever I open Excel. It's a bit awkward to have it on the sheet. Is there a way to place the button on the ribbon to get it out of the way? (I'm on an intermediary level with VBA
Another alternative would be to make a hide button on the userform, I guess. Once it disappears though I'd probably need another button to call it up again.
I have 2 userforms. UF1 and UF2. UF2 has a rowsource set to its Listbox. UF1 has a search function that searches the original sheet. Now I want to double click on an entry in UF1's Listbox and select the same entry in UF2's Listbox. I want to then work with that entry in UF2.
[Code].....
I do all of this to circumvent Excels restriction. I can't search in a rowsource Listbox, but any edits done to my new Listbox wouldn't be made to the Excel sheet.
Here I have a listbox, but I would like to know if it's possible to be able to sort each header on the userform when clicking on the header?
Also, how should I also delete some entries with a button?
listbox.xlsm
Attached small application. Open the application and click on the LISTBOX button. Code for the Filter by Item button or the Filter by Representative button. I would like to select an item from either of those dropdowns in the search box, click on the relevant button and the list box will populate to show the results.
For example, if I were to select Chocolate Bars from the dropdown and click filter by item, I want to see only the three lines [i.e. line 2, 6 and 7] present in the listbox, and I want to be able to doubleclick on any of those lines to go to the record if I wish.
Similarly, if I select Robert from the other dropdown and click Filter by Representative, I want to see the relevant three lines [i.e. 4, 5 and 8] relating to Robert, present in the listbox, where I can again double click to go to the record [i.e. the data entry userform related to particular record selected.
I have attached a file : Form.xlsm
I have a list box that shows a range of cells (called emailrange). I want to add a Delete button that enables a selected value in the Listbox to be deleted if necessary (just the cell value not the row).
The code I have thus far is below: ...
I have the following sheet which functions as a table to store values for files that have been created using the application which this table is in. In this app., I have a form with 2 listboxes. When the form loads, I have the first listbox list values which each of these files are listed under (i.e. - "sub-directories"). With a selection of one of the list values and clicking of a button, I want the second list box to list the values of cells listed in a range directly below where the selected value in the first listbox came from.
I'd prefer, in the first listbox, to have only the values of the ranges that have a value in them in the listbox. However, this would cause my listbox.selected(array) not function properly. But since my current offsets (in the second sub) do not seem to be working anyway, maybe I am going about this totally wrong.
The following line highlights the first selection in the listbox visible and calls the listbox click event
myListbox.Selected(0) = True
myVal = myListbox.Value 'after this line executes, instead of being set to the actual first value in myListbox, myVal is ""
Why is myVal not set to the first selection in the listbox? After I execute the following code, myListbox.Value still equals "" and not "Counter 1".
myListbox.Value = "Counter 1"
Why can I not set myListbox.Value?
I have 1 listbox (lisbox1) that retrieve it's list items from a worksheet range (imported/database query from access). This works fine.
I have a second listbox (listbox2) that should display results from clicking a value in listbox1.
Listbox1 contains companynames (1 column), listbox2 needs to be populated with quotes.
Range A3:D4800 contains company ID's, Company names, Quote Numbers. When I select a company name in listbox1, I need listbox2 to be populated with all quotes for that company.
I have tried (using vba) to do a vlookup using the listbox1 value, but I cannot seem to figure out how to populate listbox2 with "all" quotes. I get 1 quote and that's it. I realize I probably need to have the vlookup loop through each cell in the range to find the value, but when I try this, I get a type mismatch when using the .additem (only for the 2nd and subsequent passes).
I cannot find this information anywhere else in this forum...
Does anybody know how to transfer an item from one list box to another using code, on the click of a button.
The list box with the information in is called 'Team_ListBox'The list box i am wanting to transfer to is called 'Starting_Team_ListBox'The button to do this task is called 'AddPlayer_team_Btn'
I have a worksheet (attached) that lists various clients in columan C. Column E lists whether each of the clients listed in Column C are 'Existing Business' or 'New Business'. I require a user form that has three radio buttons (one to select 'New Business', another for 'Existing Business' & one for 'All').
When Selecting a radio button, (e.g. 'Existing Business'), I need all clients listed in Column C of the worksheet that also have 'Existing Business' in Column E to be listed in a ListBox on the UserForm (with the second radio button allowing the text box to list 'New Business' and the third to list both Existing and New).
I have two listboxes on a userform. One is the "choice" listbox, the other is the "master" listbox. Each item selected is a billing object on a sales invoice.
problem: The master list works fine when the item is selected in the choice list. But when it is deselected, how can you REMOVE it from the master list? question: How can I add a text box automatically to the userform to allow the user to enter quantity info?
For I = 0 To CodeList.ListCount - 1
If CodeList.Selected(I) = True Then
obj = CodeList.Column(0, I)
p = 6
test = 0
Do While test = 0 And p <= 25
If sheetsales. Range("C" & p) = obj Then
test = 1
Else
test = 0
End If
p = p + 1
Loop
If test = 0 Then.........................
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies View RelatedHow can I return name of a command button on click? I want to create some sort buttons on a sheet I will use regularly to speed things up. I thought if I could call each sort button by the column letter the button sits in I can use this in a single sub for all buttons
e.g the button sitting in column A is called "A". when i click the button, it returns it's name to a variable which I can then use to sort column A. I know I could create a seperate routine for each button but I was just trying to think of something neater.
I have a userform with a button on it named But1. Is it possible to store But1 into a variable then activate the But1_Click action using a variable?
Dim strButname As String
strButname ="But1"
Now, how would you activate the But1_Click method using strButname variable. With listboxes you can use the Control(strListboxName) methodology?
This doesn't work, but gives you an idea of what I am trying to do.
Controls(strButname)_click
I currently am using a form button to create new rows.
I need two different kind of buttons. I have a button that does this-
VB:
Sub InsertRow()
'this inserts a row where the button is clicked.
Dim r As Range
[Code]....
However, when I try and create these codes using a Command button (I need it for the color), I get the error
"unable to get the buttons property of the Worksheet class"
P.S one other thing, say the button is in row 3, and Cells A1 and A2 are merged, when you click the button in row 3, it should extend the merge to A3.
i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
View 1 Replies View RelatedThis is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
ActiveSheet.Select
Range("B4:B37").Select
Selection.ClearContents
Range("G4:G37").Select
Selection.ClearContents
Range("B1").Select
Selection.ClearContents
Range("D1").Select
Selection.ClearContents
Range("F1").Select
Selection.ClearContents
Range("J1").Select
Selection.ClearContents
Range("M2:M3").Select
Selection.ClearContents
Range("B4").Select
ActiveWorkbook.Save
Application.Quit