I am receiving a run-time error with following code. The error message is "unable to get the VLookup property of the WorksheetFunction class". I only receive the message when the lookup value is not found in the table.
I thought adding the "False" command at the end would return an "N/A" but it didn't. Is there anything I can add to avoid this error?
I am trying to look at column at of two different workBOOKS and then when a match is found take the value from column D in workbook two and copy it to the corresponding row in the current column of workbook one.
this is the code I'm using and I get that unable to get the vlookup function. I thought maybe it was because not all of them will have matches so it could return an error if it is trying to return empty, so I put int on error resume next, and it ran through but never brought over ANY data, and there ARE matches and data to be brought over.
destRng is the range in the current column(that i just inserted) on the active worksheet that we will be putting the new info into. srcRng is the range in column A on the other workbook that the numbers are being compared to. src is just an integer
I have a UserForm with one ComboBox and one TextBox. The ComboBox is populated from another sheet with product codes in Col A and names in Col B. When the user selects a product code from the ComboBox the respective name appears in the adjacent TextBox. Once both boxes have been filled the user can then save the data to a third sheet. Now the problem arises when the user tries to manually enter a code into the ComboBox that does not appear in its rowsource - VBA states a run-time error and my new keyboard goes flying out the window again. Attached is an example sheet
View 4 Replies View RelatedI get the "Unable to get the Correl Property of the worksheetfunction class" Error when I try to run the following code
CurrentRow = 2
CurrentColumn = 2
Finalrow = 5
WS2 = Sheet2
Finalrow2 = 5
Num_Records = 4
Correlation1 = Application.WorksheetFunction.Correl(Range(Cells(CurrentRow, CurrentColumn) & ":" & Cells(Finalrow, CurrentColumn)), WS2.Range("B" & Finalrow2 - Num_Records + 1 & ":B" & Finalrow2
I am having trouble with IsError function consistently catching errors in my call to the Search worksheetfunction. For example, here is a snippet of my code that works just fine:
Code: .....
If I type in the VBA Editor immediate window
Code:
?application.WorksheetFunction.average(array(1,3))
I get the expected answer of 2, but
Code:
?application.WorksheetFunction.mode(array(1,3))
produces a pop up error of:"Unable to get the Mode property of the WorksheetFunction Class"
(Excel 2010 on 64 bit machine)
The vlookup worked earlier but now it doesn't and everything looks OK to me. Scroll down a little bit in the code view to see the error line.
HTML Code:
Sub Email_Executed()
Dim OutlookApp As Outlook.Application
Dim MItem As Outlook.MailItem
[Code]...
TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)
The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.
I use Excel 2010 andexample.xlsx cannot make my code working because of the so famous errore above.
I have several pivot tables (pt) in different worksheets (ws), and a list of items stored in an array I created. I've written a macro for setting ON all items in pt except those ones in the array (listOffnet within the code). Everything works properly.
Now, I would like to do the complementary action: setting OFF all items that are not in the array. Unfortunately, I get the error at line:
[Code]....
I am getting the following error when i am clicking a Button on sheet1 which is generating duplicate of sheet1.I am trying to delete the button when duplicate is created..Error is:" run-time error '1004' Unable to get the buttons property of the worksheet class" at this line in code"ActiveSheet.Buttons("CmdHistory").Delete"
View 2 Replies View RelatedI am using this code (below) to hide certain rows or columns depending on what number is entered. Everything is working fine and I am at the point where I would like to share this excel sheet with others but I would like to lock certain cells so that others cannot alter the formulas. As soon as I lock the cells and then enter values into the unlocked cells, I get the "run-time error '1004': Unable to set the Hidden property of the Range class".
I am using excel 2010 x64.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)If Not Intersect(Target, Range("B3")) Is Nothing Then
If Range("B3").Value = 0 Then
Columns("G:P").EntireColumn.Hidden = True
Else
If Range("B3").Value = 1 Then
Columns("H:P").EntireColumn.Hidden = True
[code]....
Unable to get the Match property of the worksheetfunction class? Here is my code
View 5 Replies View RelatedI am trying to generate a number based on the Month, Year and then three digits. For Example: 1107-001. I would need it to refer to another sheet for the previous used last three digits. Each month it would start over at 001. On the Reference sheet it would always be in the first column.
View 2 Replies View RelatedI was having an issue with my vlookups not working properly so I took out the error handler to try and find out why.
It came up with the error "Run-time error '1004': unable to get the vlookup property of the worksheetfunction class"
Below is my code. How to rectify this?
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
Dim rng As Range, cell As Range
[Code].....
Having problems with trying to get my vba code to access the SpecialCells property. Receiving the following error.... Unable to get the SpecialCells property of the Range class. The section of my code is below that is causing the error. Keeps stopping on the "Selection.SpecialCells(xlsCellTypeVisible).Select" line.
Sheets(" Book Query").Range("A6:I6").Select
Sheets("Book Query").Range(Selection, Selection.End(xlDown)).Select
Selection.SpecialCells(xlsCellTypeVisible).Select
Selection.Copy
Sheets("Inventories and Variances").Select
Sheets("Inventories and Variances").Range("A7").Select
I've tried using the following (simplified) code to look up a date in a named range and return the result from the same row in the next column to the right. I can do this easily in the worksheet, but I can't write a VBA function to do it. Code:
View 2 Replies View RelatedI have created quite a nice little macro that;
drills through a lot of key figures, updates a pivot chart and copies the chart to powerpoint.
However it crashes on one particular data set every time with this error:
Run-time error '1004':
Unable to set the _Default property of the pivot item class
The code where the debugger stops is the last line below here.
lngKpi = Sheets("Helpfile"). Cells(lngRow, 2)
Sheets("Charts").Select
ActiveSheet.ChartObjects("DK").Activate
ActiveChart.PivotLayout.PivotTable.PivotFields("KPI # (overall").CurrentPage = lngKpi
I can manually change the pivot chart to the keyfigure it crashes on and thereby workaround the problem in the macro. Also it works for more than 50 other keyfigures without problems.
I am receiving the error "unable to get the find property of the range class" in my code. I have attached my code and highlighted red where my error is occuring.
On Error Goto ProductionRptEngineListExport_Error
Dim objWrkTmp As Excel.Workbook
Dim ObjWrkshtActive As Excel.Worksheet
Dim objWrkshtTmp As Excel.Worksheet
Dim RngStart As Excel.Range
Dim CurrentRowNum As Long, RowCnt As Long
Dim GroupRowNum As Long, ColCnt As Long
Dim chtChart As Excel. chart
Dim intwrktmp As Integer, intwrktmpTot As Integer, intLastRow As Long
Dim sngwrk As Single
ctlStatus = "Opening Production Report..."
DoEvents........................................
I locked the cells on Sheet1 from B4 to B10.
I protect the Sheet1 Review > protect sheet and selected two checkboxes from protect sheet property "Select locked Cell" and "Select unlocked cells".
It is working fine and it does not allow the user to view the locked cells B17:B24 while protection is on.
I have a RadioButton1 on the same Sheet1 and i put the following code behind the button to hide the 4 up to 10 rows. When i will press the button while password protection is on; it is giving me the following error:
Unable to set the Hidden property of the Range class.
I've been using the following code successfully for years. Today I would get the error 1004:Unable to set the visible property of the worksheet class. All my searches came up with someone not realizing they had protected the workbook. As you can see, the first thing I do before trying to set the worksheet visible is to unprotect the workbook. In frustration and on a lark I tried .Sheets("items").Visible = True and it worked. These kind of intermittent errors in Excel VBA are very frustrating. Can anyone tell me what I am doing wrong?
View 6 Replies View RelatedI keep getting that error when I'm running my macro. When I debug, it points me to the bolded line in the code below. The larger macro I'm running this function in runs this function some 101 times without error before this happens.
The values of the parameters are as follows when it gives me the error:
Find_Exact("hchen", ws1, "B:B"). The first parameter is the only one that changes in the previously mentioned running of this function.
I am using the following few lines of code:
Code:
Range("A3:L" & ActiveCell.Offset(1, 0).Row).Select
With Selection
.Borders(xlEdgeLeft).Weight = xlMedium
.Borders(xlEdgeTop).Weight = xlMedium
.Borders(xlEdgeBottom).Weight = xlMedium
.Borders(xlEdgeRight).Weight = xlMedium
.Borders(xlInsideVertical).Weight = xlThin
.Borders(xlInsideHorizontal).Weight = xlThin
End With
However am receiving an error: "Unable to set the Weight Property of the Border Class". The odd thing is, I only receive the error on the following 2 lines:
Code:
.Borders(xlEdgeBottom).Weight = xlMedium
'and
.Borders(xlInsideHorizontal).Weight = xlThin
The sheet is not protected, events are disabled, and the range that gets selected changes dynamically based on the number of rows of data in the table, however in this example cells A3:L15 are selected.
I made a macro to plot several line graphs on two axis (up to 5) side by side. I made the macro open up the files i need, and extract the necessary data into a common workbook. I put the common element, time as the x axis and heat as one y axis and pressure as the secondary axis. The source data on the excel worksheet is as follows:
(column A = time; column b = heat1; column c = pressure1, column d= heat2; and so on.
So when i have 3 workbooks i need to compare, it should have 6 lines. 3 sources work fine, but 2 sources gives me the "Unable to set the AxisGroup Property of the series class" error message.
Code:
Range("A1:" & Chr(65 + (2 * lNum)) & CStr(Lastrow + 1)).Select
Charts.Add
ActiveChart.ApplyCustomType ChartType:=xlBuiltIn, TypeName:= _
"Lines on 2 Axes"
ActiveChart.SetSourceData Source:=Sheets("Sheet1").Range("A1:" & Chr(65 + (2 * lNum)) & CStr(Lastrow + 1))
[Code]...
I don't get why it works for 3 but not 2 sources.
The problem is coming from the Else statement.
Code:
Sub LockByColor()
ActiveSheet.Unprotect "pc"
Dim cl As Range
For Each cl In Range("$BO$1:$BZ$45")
If cl.Interior.Color = 6299648 Then
cl.Locked = True
Else: cl.Locked = False
End If
Next cl
ActiveSheet.Protect "pc"
End Sub
I have been working on this small project and I it works to create checkboxes and check what boxes are checked. However, at the end of checking which boxes are checked there is a pop up error message saying Run-Time error '1004': Unable to get the CheckBoxes property of the Worksheet class. These are the lines of code, where is the error?
Sub IsBoxChecked()
Dim titles(200) As String
Dim wks As Worksheet
[Code]....
Sheets("PRODUCTIVITY").Select
Range("A20").Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlDown)).Select
With Selection
.Locked = False (***debug screen is highlighting this line***)
.FormulaHidden = False
.ClearContents
End With
Range("A20").Select
ActiveCell.FormulaR1C1 = "PASTE NEW DATA HERE"
Range("A20").Select
This worksheet was built for use of many users so this sheet is PROTECTED.
The user is instructed to copy/paste information from our internal web into the selected areas in the worksheet.
When i UNPROTECT the worksheet the VBA works fine.
The data in the worksheet spans from columns A to P, and the length (# of records) is variable.
Here is the code that generates the error:
Set rng = Range("I:I")
LR = ActiveSheet.Cells(Rows.count, "I").End(xlUp).Row + 2
Range("I" & LR).Value = Application.WorksheetFunction.Sum(rng)
Range("I" & LR).NumberFormat = "#,##0"
and from what I've read on google the .SUM(rng) need to be set to a range, but isn't it already a range? I tried plugging in there Range("I:I") for rng and that didn't work either.
I'm trying to add the xvalues, but I get an error that says "Unable to set XValues property of Series Class"
Set buildSeries = ws.Cells(6, 2)
For k = 4 To Col Step 2
Set buildSeries = Union(buildSeries, ws.Cells(6, k))
Next k
ActiveChart.SeriesCollection(1).XValues = buildSeries
When I try and run my macro I keep getting an error message saying Unable to get the Find Property of the Range Class and it refers me to:
TeamRef = Worksheets("Info Reference").Range("A3:A120").Find(What:=strFind1, After:=Worksheets("Info Reference"), _
LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False).Address
I am struggling with one problem. I am trying to change formulae of series in a chart using VBA code given below. But I am getting
'Runtime Error 1004, Unable to set the formula property of the series class'
ActiveChart.SeriesCollection(1).Formula = _
Replace(ActiveChart.SeriesCollection(1).Formula, "Sheet1", "test")
