I have a spreadsheet which I need to write a formula which looks at a field and if the number in the field starts with either 55, 50 or 78 it populates my selected field. This is an example of what I am trying to do :
View 2 RepliesI have 2 conditions that I need to apply.
View 3 Replies View RelatedI have three IF statements as below. the problem is if the first statement is true I want it to skip the next two statements or the result will be changed again.
View 2 Replies View RelatedSheet one will contain the following:
DATE A B C D E
2/22/2008TRUEFALSEFALSEFALSERon
2/23/2008FALSETRUETRUETRUEPhill
2/24/2008FALSETRUEFALSEFALSETracy
2/25/2008FALSEFALSEFALSEFALSESharon
2/26/2008TRUETRUEFALSETRUEBill
On sheet two I need to list any date that has three or more true statements with the coresponding name.
EXAMPLE:
2/23/2008Phill
2/26/2008 Bill
I am trying to add a final if statement to a formula but it wont let me and I cannot see what i am doing wrong - I wondered if there was a limit? ...
View 14 Replies View RelatedI am trying to tell the spreadsheet to look at each separate month and return different criteria. Current formula for single month search is:
=IF(VLOOKUP($E5,'PO Info'!$A:$AW,2,0)"","B",IF(VLOOKUP($E5,'PO Info'!$A:$AW,3,0)"","C",IF(VLOOKUP($E5,'PO Info'!$A:$AW,4,0)"","D",IF(VLOOKUP($E5,'PO Info'!$A:$AW,5,0)"","E",IF(VLOOKUP($E5,'PO Info'!$A:$AW,6,0)"","F","")))))
I would like to add an AND function so that the IF statement also looks at the month which is represented in this case as $E$7, the formula I have been trying is:
=IF(AND($E$7=WeekNos.!$A$2,VLOOKUP($E5,'PO Info'!$A:$AW,2,0)"","B",IF(AND($E$7=WeekNos.!$A$2,VLOOKUP($E5,'PO Info'!$A:$AW,3,0)"","C",IF(AND($E$7=WeekNos.!$A$2,VLOOKUP($E5,'PO Info'!$A:$AW,4,0)"","D",IF(AND($E$7=WeekNos.!$A$2,VLOOKUP($E5,'PO Info'!$A:$AW,5,0)"","E",IF(AND($E$7=WeekNos.!$A$2,VLOOKUP($E5,'PO Info'!$A:$AW,6,0)"","F")
Then carry this forward for other months, for example, a later look at this formula would be:
=IF(AND($E$7=WeekNos.!$A$2,VLOOKUP($E5,'PO Info'!$A:$AW,2,0)"","B",IF(AND($E$7=WeekNos.!$A$2,VLOOKUP($E5,'PO Info'!$A:$AW,3,0)"","C",IF(AND($E$7=WeekNos.!$A$2,VLOOKUP($E5,'PO Info'!$A:$AW,4,0)"","D",IF(AND($E$7=WeekNos.!$A$2,VLOOKUP($E5,'PO
[Coe] ...........
I am trying to create a form where my staff can use a drop down box to select their role on the drop down bar on the "Template" tab- M12 (highlighted orange) that can reference to same role on "sheet 2" and show the corresponding data in column C, highlighted in green. The output of the formula starts on "Template!23" - highlighted in yellow. I have started to use an array formula but cannot fully utilise it as I need the row reference needs to be variable. Is it possible to use multiple "ifs" to account for the changing inputs on the drop down bar? What do you think? <attached>
View 5 Replies View RelatedTrying to make it even more complicated....probably again misplaced my parenthesis
=IF((AND('Input Page'!B43="-",OR('Input Page'!B13="New Lease In-House",'Input Page'!B13="New Lease w/Co-Broker")),'Analysis Report'!D57*'Input Page'!B32/”2”,'Analysis Report'!D57*'Input Page'!B32/"4",IF(AND('Input Page'!B43="-",OR('Input Page'!B13="Renewal In-House",'Input Page'!B13="Renewal w/Co-Broker",’Input Page’!B13=”Expansion In-House”,Input Page’!B13=”Expansion w/Co-Broker),'Analysis Report'!D57*'Input Page'!B32,'Analysis Report'!D57*'Input Page'!B32/"2"))
I have two cells = A1 and A2 in which there are words.
What I need the formula to do is if in A1 or A2 is "ABC" or "ABC2" , number 3 is going to appear in B1. If A1 or A2 is going to be "ABCD", number 6 is going to appear in B3.
I have this formula so far that works but cannot add any more arguments.
=IF(OR(A1="ABC",A2="ABC"),Table!F12,IF(OR(A1="ABCD",A2="ABCD"),Table!F13))
(The added numbers are found in another worksheet called "table".
I am trying to incorporate several IF statements into a single formula:
=IF(AB5<20,"LR",IF(AND(AB5<30,AB5>25),"C",IF(T5<>"","CLEAR",IF(AND(AB5<240,AB5>40,AA5=1),"B-T1-F10",""))))
What I am trying to achieve with this formula is:
- insert LR if AB5 is less than 20;
- insert C if AB5 is less than 30 but more than 25;
- if neither of the above is true, insert CLEAR if T5 contains something and if not insert B-T1-F10 if AB5 is between 240 and 40 and AA5 = 1.
The problem I have is that the B-T1-F10 is not being inserted where the other criteria are not met so I think I have not integrated the statements correctly?
I know there is a maximum of 7 nested IF statements available but I cannot get the following formula to work, even though it only has 7 IF's
=SUM(IF(Department=J$88,IF(Progress_StatusCNP,IF(Progress_StatusCSO,IF(Progress_StatusNS,IF(Current_Phase=$B91,IF(MID(Progress_Status,1,7)="On Hold",IF(MID(Group_Procurement_Involved?,1,3)="Yes",In_Year_Opportunity__2007,0),0))))/1000)))
CNP, CSO and NS are named cells, all named ranges are the same size and the formula is entered with Ctrl & Shift to make an array formula.
I would like to create a function where I would be able to ask and answer 20 questions. When using If statement it only allows me to use up to 7 nests.
I have created an example below with all the statements I need using IF but of course this doesn't work so I would need so how to handle this particular issue with so many questions/answers in one. Even though the delta between 5-4 and 3-2 is same I want different answers. I'm using Excel 2010.
=IF(AND(AK58=5;AL58=5);"OK";IF(AND(AK58=5;AL58=4);"1 OP";IF(AND(AK58=5;AL58=3);"2 OP";
IF(AND(AK58=5;AL58=2);"2 OP+1 NV";IF(AND(AK58=5;AL58=1);"2 OP+2 NV";IF(AND(AK58=5;AL58=0);"2 OP+2 NV+INST";
IF(AND(AK58=4;AL58=4);"OK";IF(AND(AK58=4;AL58=3);"1 OP";IF(AND(AK58=4;AL58=2);"1 OP+1
[Code]...
creating Named Formulas to handle nested IF & And statements, to get around excel's limit of 7 nested IF statements.
First of all, is it possible to create a Named Formula with combined IF with AND statement such as: =IF(AND(F26>=54,F26<=77.99),"2x3"," ")--I am getting a periodic error message: "Cell with block IF function should not contain anything else."?
I am trying to: 1. Contstruct two separate Mega formulas using IF & AND to determine what range of sizes , located in Col "F", should fall into which SIZE_CAT, sample of ranges are as follows:
SIZE_CATSIZE IN TOTAL INCHES
2X3 54 thru 77.99
3X5 78 thru 108
4X6 108 thru 138
2. Name these two formulas, FirstNamed and SecondNamed
FirstNamed formula is:=IF(AND(F26>=54,F26<=77.99),"2x3",IF(AND(F26>=78,F26<=108),"3x5",IF(AND($F26>=108,$F26<=138),"4x6",IF(AND($F26>=138.01,$F26<=168),"5x8",""))))
SecondNamed formula is:=IF(AND($F30>=168.01,$F30<=198),"6x9",IF(AND($F30>=198.01,$F30<=234),"8x10",IF(AND($F30>=234.01,$F30<=270),"9x12",IF(AND($F30>=270.01,$F30<=320),"10x14",IF(AND($F30>=320.01,$F30<=500),"Larger","")))))
3. Combine two named formulas with a "Master Formula" such as:
=IF(FirstNamed,FirstNamed,SecondNamed)
I got the IF with AND formulas to work in a test columns, but cannot seem to get them to respond properly when trying to get them into a Named Formula(s).
I have attached an example of the workbook.
I can drag it down to fill a series of cells within a column.
Let's say the formula in cell A1 is:
I am trying to use the following formula in Microsoft Excel 2007-
ROUND(IF(DataInput!$D$5 = "Black",0.81*E4*O4,(IF(DataInput!$D$5 = "Red",J4*0.025*E4*O4,(IF(DataInput!$D$5="Green",(57.00+IF(J4>25,(J4-50)*33.59,0))*O4))))),2
I want to use an IFERROR statement. If the results do not equal Black, Red or Green, I want the data to error so I can have the word FIX showing.
I have simple Countif and Averageif formulas that I would like to have linked to variable data in cell E6 on the Assumptions (2) tab however, the formula is not taking the cell as the criteria and only taking a hard number when I am using >=.
The example would be: I3 needs to be able to use the data changed in E6 for the >= number instead of the hardkey 29...
I am trying to understand how to use index and match in an array formula. Probably easiest to take a look at my example sheet. For some reason, the first result is working, but the others aren't.
[URL] .....
Alternatively, here is a screenshot.
Uploaded with ImageShack.us
The formula I have tried is: =INDEX($E$3:$E$11,MATCH(1,IF($A$3:$A$11=G3,IF($B$3:$B$11=H3,
IF($C$3:$C$11=I3,IF($D$3:$D$11=MEDIAN(J3,K3,$D$3:$D$11),1,0) ,0),0),0),0))
confirmed with ctrl shift enter.
How can I combine the two below statements like these to make one "Or Statement"? Sorry...I haven't done excel and/or's in forever?
=IF(('Proj Info'!L10="main")*AND('Proj Info'!L9="CT"),"BMSVC",'Proj Info'!L9)
OR
=IF(('Proj Info'!L10="serv")*AND('Proj Info'!L9="CT"),"BMSVC",'Proj Info'!L9)
My formula is not working correctly; not sure what to do. I use this same formula with numbers and it seem to work, but only have 8 IF statements as well. This example below doesn't even work with only 8 IF statements.
--------------------------------------------------
What I am saying below is = If E3 = a swat team (i.e. EO-Deal Processing-Prescreen) then please enter "Chumbley" and so on. For anything else put an na or n/a for blanks or swat teams that I haven't lised in the criteria.
---------------------------------------------------
=IF(E3="EO-Deal Processing-Prescreen",Chumbley,IF(E3="EO-Deal Processing-DocGen",Chumbley,IF(E3="EO-Deal Processing-Events",Chumbley,IF(E3="EO-Deal Processing-Triage",Junk,IF(E3="EO-Deal Processing-Processing",Queck,IF(E3="EO-Deal Processing-Calcs",Doyle,IF(E3="EO-Deal Processing-Closing",Terry,IF(E3="EO-Deal Processing-D11B",Blazier,IF(E3="EO-Deal Processing-Isolated UI",James,na)))))))))
a = Range("d1").CurrentRegion.Resize(,2).Value
and
Range("G1").Resize(n,2).Value = b
what do the above two lines of code do?
I have the following:
=IF(I8>=G8,IF(I8
if-and-else statement in vb.
I made a combo box where the user selects a part in a combo box and I want the part selected to be stored in a certain cell. The first selection would be stored in C15 and if thats not empty then in D15 and if thats not empty then in E15 and if thats not empty then in F15.
Dim m As Integer
m = cboPart.ListIndex
If m = 0 Then
If IsEmpty(ActiveCell.Range("C15")) = True Then
ActiveCell.Range("C15") = cboPart.Value & vbLf & "Name: " + txtName
Else
ActiveCell.Range("D15") = cboPart.Value & vbLf & "Name: " + txtName
End If
Else
If IsEmpty(ActiveCell.Range("D15")) = False Then
ActiveCell.Range("E15") = cboPart.Value & vbLf & "Name: " + txtName
Else
ActiveCell.Range("F15") = cboPart.Value & vbLf & "Name: " + txtName
End If
End If
When I run this if-and-else statement it stops storing the selected data after the following:
If IsEmpty(ActiveCell.Range("C15")) = True Then
ActiveCell.Range("C15") = cboPart.Value & vbLf & "Name: " + txtName
Else
ActiveCell.Range("D15") = cboPart.Value & vbLf & "Name: " + txtName
End If
I got a 2 columns (A:B) with values in workbook1 (survey2.xlsm)
I want to open a sheet named according to values from column A wb1 in workbook2 (du_database2)
And I want to fill in the offset values (column B) in the aproppriate sheet
I wrote this sub for it. I am having troubles with the for each statements (how do I set them up properly?). The script itself hasn't been checked might also been wrong there.
VB:
Sub copytest()
'by J
Dim ws As Worksheet
Workbooks.Open "survey2.xlsm"
Application.Workbooks("du_database2.xlsm").Activate
[Code] .....
I'm using vlookups within IF statements to look in a number of various speadsheets depending on what the lookup value is.
So for example,
Formula:
This works well enough however I need some look up values to look in multiple spreadsheets as the data is split out between several spreadsheets. So for example, if B1=Hello I want to vlookup to 2 different spreadsheets.
I know I could do two instances of a vlookup within the formula, both for "hello" but looking to different spreadsheets. But doesn't this mean that if the first vlookup finds the value, the second one will overright it with an "#N/A" if it doesn't find it?
I need to write IF statement with 4 criteria, or at least I think IF will do the trick. It would be difficult and not very visual to describe my question here, therefore I have attached a dummy workbook with the comments. Basically I have got 2 values in 2 columns. Next 2 columns will hold letter "x". There are 4 possible variations how "x" will appear in those two columns: first, second, both or none. So depending where the "x" is, I need to return one of the 2 values.
View 6 Replies View RelatedI have various 6 x 6 blocks which contain just numbers, in another part of the spread sheet I have a 1 x 6 block of numbers. What I need to do is to check whether any of the numbers in the 1 x 6 block appear in any of the 6 x 6 blocks.If that does occur then I want to make a specific cell increase by the times that the match happens.using HLookup but just got errors and the If Statement, although did work, went on and on and on.
View 6 Replies View RelatedI have a list of dates and I need to calculate how many of the dates are before or between certain dates. I can't quite get my parameters correct.
I'm having trouble joining the followinf IF Statements. They work independently, however, I cannot get them to work in the same Cell.
Any help would be greatly appreciated.
=IF(A9="YES", SUM(A15+A21),"0")
=IF(B9="YES", SUM(B15+B21), "0")
I am new to this thread and hope you can find the time to help me. I am using excel to look up data manually entered in Widgets, Gidgets, Lidgets fields to find an exact match in an array and return the value in "field 1" with no luck. My lookup formula should return "9" from the Field 1 column.
Data Entry:
Widgets3
Gidgets6
lidgets5 ........
I need to write an IF statement that exceeds the 8 statement maximum. Basically, what I want to say is: IF(U2>K2,1,IF(U2+V2>K2,2.........all the way up to U2...AM2>K2,19)
View 13 Replies View Related