i have a project and i am making a spreadsheet for a make believe green grocers. i have a retail price and a whole sale price
to work out the retail price i need to sue this forumula
retail price = wholesaleprice + x% of wholesale price
im stuck, what i have done is declared the percent value on the page, which can be changed at any time, how do i then substitue this value in to the formula (and most importantly, what is the formula!)
I have a problem - I wanna to mark (to colour) just cells which I use in formula is there any option for thise
If I have some table and I have formula =A1+B5+C7 I wana to colour just mentioned cells
I am trying to create a column to match duplicate information, primarily numbers, so I can delete the duplicate information. Using the Find option is too time consuming. I am pasteing the new info above the previous weeks info. Some years ago I used a formula that would "Match" a range and I believe it would copy the duplicate in the empty column but it's been so long I am not certain nor do I remeber the formula. I've tried using the filter feature and looked at previous post but I am not familiar enough to know how to decipher the info given.
View 9 Replies View RelatedI would like to use IF function, to get the answer, if the mark is less than or equal to 20, the answer is AVERAGE, if the mark is between 21 and 25 the asnwer is GOOD, if the mark is between 26 and 30 the asnswe is VERY GOOD, if the mark is above 30 then the asnwer must be EXCELLENT.
View 4 Replies View RelatedI need some help with vlookup/if statement ......
View 9 Replies View RelatedI am trying to find a formula that will count the number of unique entries there. I have tried the solutions posted on various websites to no avail (most recently:
Code:
=SUM(IF(FREQUENCY(MATCH(A1:A10,A1:A10,0),MATCH(A1:A10,A1:A10,0))>0,1))
).
The answer should be 4,457.
Ticket Number
T20110819.0527
T20110830.0339
T20110901.0060
T20110901.0060
T20110907.0042
T20110907.0042
T20110908.0186
T20110908.0186
T20110908.0186
T20110908.0186
[code].....
how and where to navigate on the website to mark all my posts solved. Sometimes I don't see the edit button, I don't know how to list all my posts, etc.
View 5 Replies View RelatedI have two workbooks, lets say book1 and book2
In column A of book 1 i have a list of numbers, going down to A250
A1 = 23423423
A2 = 23442345
etc etc
I would like some code for a button press, if the value in A1:A250 is in book2 (A1:A250)
Both workbooks will be open at the point of the button press
then adjacent cell in B1:B250 is marked as Yes
I've searched for this in the forums but can't find anything. I need to find/replace a character in Excel, it's a question mark in a box and looks like this
I've tried searching for special characters (using the ALT key and number pad) but I can't find anything matching this.
When I save the spreadsheet as a CSV (TAB delimited) this character gets picked up as a TAB, but when I try find replace on the TAB character it doesn't work!
I'm using Excel 2007.
I have to manually enter the code nos. of the hard copy to find the code in the soft copy. After finding the number, I wish to mark it as so that double work should not be done or to find which code's hard copy is not with me.
I am using Find and Replace to find the number and after it is found I have to click the replace tab to enter colour in it.
Is there any auto function to mark as soon as I find the required number instead of clicking the replace tab to save my time.
I have the following formula and need to incorporate that it is only a "B" if B20 also matches in named range "Breakdown_RSC"
Formula: ...........
I need the following section to take into account the data in B20 as in if it matches the data in the cell it should be a "B" in the cell.
I am making a rough gantt chart in excel for a project schedule. Japanese at work love excel fro some reason that is why I am trying to do this. I have column headings for days ( 3/3, 3/4, 3/5, etc) and I want to find a way to mark the intersection when a date is input in another row. I tried to do some conditional formatting using symbols, but couldn't get anything to work.
see picture. I want to mark at correct date according to column headings when date is placed in column E or F. This example shows column E with 3/10 so I want to make a value appear at intersection AS and the row 3/10 is on. Would like to get a symbol to appear there if possible.
excel help.png
Is there a way to set a cell so if you click it, an "X" will be in the cell and if you click it again it will clear? Specifically I am looking to do this in the "1st Trip" column on the attached. I was going to use a check box but the appear to small and it does seems as though in Excel 2003 the size can be adjusted?
View 11 Replies View Relatedhow do i mark a thread closed? I looked in tools and lots of other places?
View 4 Replies View Relatedi want to know how to mark the cells with color where the starting date is not greater than ending date.
View 4 Replies View RelatedI have a list of energy consumption records by address. The utility that supplied the data had to manually pull each record one by one from their 'database'. If two individuals shared one account, the record is repeated.
So, I have a 500,000 row table with some records with identical addresses and identical consumption amounts. How would I go about separating the duplicates (to then delete them)?
It's sorted by address then consumption. The logic is...
if the address value in column A repeats and the consumption field in column B also repeats, then...(place a marker in column C so I can sort and delete)
set up a cost based markup spreadsheet?
I need to be able to mark up values from 0.01-9.99 by 20% of their value, and 10.00 and above by 10% of their value.
I only know how to mark up values by a single percentage.
I need to find duplicates subnet information in row F and mark the words "Duplicate"
Then I need to do the same with Row K. I need to find any duplicate subnet masks.
The reason for this is that I merged two orginizations into one spreadsheet and I need to find the duplicates in Company A and Company B's subnet and mask information.
I have a simple spread sheet, as shown below. Each line is on it's own row, and all the info on each line is in the first cell. (A1,A2,A3 etc....) What I require is a macro that will look at the "Code" line, take note of the code and if it finds a duplicate code number, mark the duplicate code with (1)....say up to (5).
In the case below, it would flag the second 07edr code and change it to 07edr(1). If there was a third 07edr code it would mark it 07edr(2) etc.
It needs to look at all the codes as it's possible there will be more then one set of duplicates.
Description = item 1
Code = 07edr
Quantity = 1
Description = item 3
Code = 08geo
Quantity = 2
Description = item 78
Code = 08cpm
Quantity = 1
Description = item 1
Code = 07edr
Quantity = 2
Description = item 39
Code = 16blf
Quantity = 1
I inserted a check mark and tried to us a vertical lookup and post the check mark
All I get is a horseshoe looking character. When I do reference to the cell I get the same symbol. What I trying to do is to place a check mark by the items which have been approved. I know I could do it with an "X" or a color, but top management wants a check symbol. I am using Excel 2007
I have about 50 timespans.
Each is formatted to have start time in column A and end time in column B (DD/MM/YY h:mm).
I also have a list, with about 850 rows timestamped (same format).
I need to mark all rows which fall in one of the ranges.
I am creating a resource and I'd like the users of this resource to be able to click a cell which will then automatically come up with an x or similar symbol (tick?) and then if they click the cell again the x will disappear. Is this possible? I don't want a drop down box where they have to choose what they want, I want it to be an automatic action when the cell is clicked because there will be many cells that I will need to do this.
View 14 Replies View Relatedi have a excel file i need to markup by a 10% value. It is the L column starting at row 2 till a varying number of rows. i need to mark up all of the rows in the spreadsheet. i do not know how to make it repeat.
This is the formula =L2*1.1(i think its the right one) but i do not understand how to make it repeat. any help would be greatly appreciated.
I need the value to be replaced with the marked up value.
i have two entries in my excel sheet which i want to get noted in the other cell as follow
A B
1 ORDER NO. 480
2 GOODS 5
3 P.M 480X5
as my table have data in B1 AND B2 so i want B3 automatically becomes 480X5 so how can i do it
When comparing collumns to find out if the values are the same or different I use this formula:
=IF((A2)=(B2);"same";"different")In some cases I see the results are not OK. I see the same values but the result states "different". This might be caused by spaces around the value that does not exist in the other cell I think.
File is attached, the green marking show what I expect to see, the yellow marking shows what puzzles me.
I need to click on a cell and when I click on it, it should change colour and insert a tick (or other symbol).
View 14 Replies View Relatedlook at the attached file. This might be the perfect job for a macro. I am trying to find the SKU's from sheet 1 in sheet 2 and subsequently mark the matching SKUs in sheet 2. Ideally, I would like the SKU's that could not be found to be set to Quantity "0"
View 2 Replies View RelatedWant to make an if rule where a student gets overall 75% in a column, then in another column next to that that would automatically give him a B or a B+ you know what I mean?
Hear are the ratios
A+ - 90-100
A - 80-89
B+ - 75-79
B - 70-74
C+ - 65-69
C - 60-64
D+ - 55-59
D - 50-54
E+ - 45-49
E - 40-44
and another one
Excellent - 80-100
Very Good - 70-79
Good - 60-69
Moderate - 50-59
Borderline - 40-49
was wondering if it was possible to mark a text or cell as red every time a subtraction was made and also to show the total cell or text as red whenever a link is made ?
View 3 Replies View Relatedhow to make upper case after mark "." (dot), see this below :
sample data
after formula
Tabrani,Ny.yusmaniar
Tabrani,Ny.Yusmaniar
Badu Zai,Tn.surjaah R & Darussamin
Badu Zai,Tn.Surjaah R & Darussamin
Zainal Arifin,Ny.elvyati
Zainal Arifin,Ny.Elvyati
etc..
it's possible with excel code? if could perhaps not macro.