I need to find duplicates subnet information in row F and mark the words "Duplicate"
Then I need to do the same with Row K. I need to find any duplicate subnet masks.
The reason for this is that I merged two orginizations into one spreadsheet and I need to find the duplicates in Company A and Company B's subnet and mask information.
I have a simple spread sheet, as shown below. Each line is on it's own row, and all the info on each line is in the first cell. (A1,A2,A3 etc....) What I require is a macro that will look at the "Code" line, take note of the code and if it finds a duplicate code number, mark the duplicate code with (1)....say up to (5).
In the case below, it would flag the second 07edr code and change it to 07edr(1). If there was a third 07edr code it would mark it 07edr(2) etc.
It needs to look at all the codes as it's possible there will be more then one set of duplicates.
Description = item 1
Code = 07edr
Quantity = 1
Description = item 3
Code = 08geo
Quantity = 2
Description = item 78
Code = 08cpm
Quantity = 1
Description = item 1
Code = 07edr
Quantity = 2
Description = item 39
Code = 16blf
Quantity = 1
I am looking for a way to ease a 24,000 line duplicate list into showing just the files from a specific folder/subfolder and its dupes. I have marked the files that reside in that folder by adding a column and entering a "1" in it. What I am looking for is a way to add that "1" to the others of that unique numerical ID duplicates, so I can sort and trim the list to just those files. End result is to show files in one folder and the locations of duplicates of those files elsewhere for eventual cleanup.
Very loosely, if C2=C1 and B1=1, then make B2=1 (and so on)
(A is blank and only there in case a formula needs input there)
A B C
110121
10121
118134
18134
18134
124232
24232
I have to manually enter the code nos. of the hard copy to find the code in the soft copy. After finding the number, I wish to mark it as so that double work should not be done or to find which code's hard copy is not with me.
I am using Find and Replace to find the number and after it is found I have to click the replace tab to enter colour in it.
Is there any auto function to mark as soon as I find the required number instead of clicking the replace tab to save my time.
look at the attached file. This might be the perfect job for a macro. I am trying to find the SKU's from sheet 1 in sheet 2 and subsequently mark the matching SKUs in sheet 2. Ideally, I would like the SKU's that could not be found to be set to Quantity "0"
View 2 Replies View RelatedHow do you find if the last character in a string is a quotation mark?
View 9 Replies View RelatedI have a approx. 70 excel sheets with thousands of entries. Within a single sheet there are some duplicate entries (based on an account number). I find the duplicate entries by using the excel 2007 conditional formating and then sort by color to only show the duplicate entries. There are often hundreds of accounts that are duplicates. Sometimes there are more than 2 identical account duplicates (could be 3,4 or more). In each entry there is a number representing the rating of said account. These numbers differ within the duplicates. Example............
I am trying to find a formula that will choose a "winner" and enter a "W" based on the highest rating within the duplicate entries and then ideally assign an "L" to the loser duplicate account(s). Sometimes there is no rating, other times the rating could be the same in which case any account (does not matter) can be assigned a "W" and the others an "L"
I have big library books database file. now i want to re check all the book with physical stock and mark in excel file.
i have one more file with books barcode no.
now i want to mark multiple cell in sheet..
I'm trying to make a macro, which search for a cell value of "Year". And from that cell, I want to make a range selection down to the first empty cell in row B or the first cell value with "Contracts of difference".
See the attached document I want to mark row 50 to row 55, and Column A to K. However as this range is in different rows each time, I need to make the selection dynamic. And I belive the heading "Year" is the best reference point.
I have a sheet with numbers in descending orders with duplicate in one row and their respective value in 22nd row. I want to find the2nd occurrence of that value. (max. occurrence2 is 2)
Foe example
5----4-----3-----3-----2-----2-----1
A----B-----0---- C-----0-----D-----E
So if i lockup value "3" C should be returned (not 0) and for 2 "D"
see attached also
I have two columns of email addresses and I want to make sure that between these two columns there are no duplicates.
View 4 Replies View RelatedI have a number of tables that may or may not have multiple dupliate enters, I am trying to indentify by name and by date. None of the tables are in the same format, which makes it ever harder for me, but all I want is a return of "duplicate" or "original", this will allow me to have acloser look at the duplicates.
View 7 Replies View RelatedI have excel sheets that will show a customer account number an ammount they need to pay and there full name and a date when the payment is expected, is there a formula that will find duplicates, if the same entry has been put in twice
I’m looking for a code that finds all duplicate words in column A & B and change the font of the found duplicate word in column B to ColorIndex = 11 and .FontStyle = “Bold”
I need this code to run frequently and possibly we can combine it with http://www.mrexcel.com/board2/viewto...272792#1272792
The wb is a dictionary and as I’m adding new words in new rows the wb needs to update. It is of course mostly important it updates when I open the wb, but it would be interesting if it could update for every new row (word) added as I might not want to close and re-open the wb just for this.
is there a way to create a condiction that will check in a colum if there are 3 or more duplicates and color coded to like red.....
I can do duplicates in general but i do not what to know about the 2 that are equal i want to know if there are 3 or more.
I have a long list of checks and I need to find the duplicates, determine how many dupicates there are for a given check (the criteria is if the ENTIRE ROW is dupicated), and highlight HALF of the duplicated rows.
I am able to sort the table however needed.
Here is the logic I was thinking of following..
If Row is Duplicated
Select Case Boolean
Case True
Count how many are duplicated
If count is even then
NumberToDelete = Count*0.5
For i = 1 to NumberToDelete
Highlight one of the duplicated rows in red background
Next i
Else
Next Record (do not highlight anything)
End If
Case False
'Nothing
End Select
End If
I'm trying to find duplicates in one particular column. I'm using this formula =if(countif($A$1:$A:$300,A1)=1,FALSE,COUNTIF($A1:A1,A1)=1) in the conditioning format tool but here's my problem:
I'm noticing that some of the cell values have spaces after the entries so the formula is not picking it up as a duplicate. Is there a quick way to remove those unwanted spaces after each entry?
I have a table that looks like this:
ID
HostLocation
NDaysinHost
marina.silva
USA
100
[Code]....
I would like to obtain a table in the following format where I can find
ID HostLocation NDaysinHost
marina.silva USA, Norway, Bolivia, Italy, Ecuador... 100,45,67,8,9...
tatiana.gottig Venezuela, Chile, Peru, Canada 89,54,32,6
Searching in the net I found the following code:
VB:
Sub groupConcat()Dim dc As Object
Dim inputArray As Variant
Dim i As Integer
Set dc = CreateObject("Scripting.Dictionary")
inputArray = WorksheetFunction.Transpose(Sheets(1).Range("A2:C9").Value)
[Code]....
However I only obtain the first two columns concatenated. It says that for more columns repeat the loop, however I did and the result was not the expected, it returned me the same two columns again concatenated. How can I arrange this to fit my criteria?
I have a sheet which contains more than 8000 names (in 1 column), & another sheet which contains around 600 names (in 1 column), is there any way wherein i can compare both the columns & find out duplicates if any?
Sheet which contains 8000 names contains duplicate cells as well, but dat doesn't matter, i jst need to compare & confirm the sheet which has 600 names should be unique (Not included in 8000 data)
I want to search a worksheet for rows that share the same value in two columns (columns C and E). See the attached excel file.
I have highlighted in yellow some rows that have duplicate values in row C and E.
So in this case rows 14 and 19 will be hidden but rows 13 and 17 will still be visible.
Note that this must work properly reguardless of how the data is sorted.
In other words, there can never be more than one row that has the exact same value for both column C and E.
Sorting duplicates. In a big database
column A consist of 2000 names
column G consist of 2050 names
column M consist of 2020 names
How to identify duplicates using vlookup ?
I run an online baseball league, and the game I use to simulate our games has issued a new version which has updated ratings for all the baseball players. I have exported rosters from the new game and rosters from my online league to .csv files and what I want to do is find which players are duplicates in both files and line them so that I can scroll both files simultaneously and update my online league file easily. I also want the non-duplicate players to be sorted below the duplicates so I can deal with them later. Someone on the other forum posted some dynamic named range code and two macros and gave me some vague instructions on how to use the codes. I have posted the codes below with their instructions:
In both:
a) There're defined 2 dynamic named ranges:
"DataTable" as: =DESREF(INDIRECTO(DIRECCION(COINCIDIR("//Player ID";updated_rosters!$A:$A;0)+2;1;1;1;"ml_rosters"));;;CONTARA(updated_rosters!$A:$A)-
[Code]....
I'm supposed to find duplicates in sheet_1 Q6:Q251 and copy one of each to sheet_2 D6:D243 as well as unique values from the same column. In a sheet_1 B6:B251 I have values related to Q6:Q251 and I have to copy each of them to sheet_2, E6:I6 in the same row as the related duplicate (I'll have max 5 duplicates). You can find attached simple example of what should be the result (sheet_2)
View 7 Replies View RelatedI have two worksheets (sheet1(1687 rows), sheet2(767 rows)). Both have part numbers in Column A
I want to be able to search Column A for duplicates found in the other worksheet. When it finds those duplicates, iw oudl like for the Part Number(columnA) and the cost(column D) to be pasted onto a third worksheet (sheet 3)
I have found lots of similar things out there, but nothing that does what I want.
I will do this Each Monday morning. I am ok with VB but what takes me 3 weeks sometimes takes you guys 10 min.
Let's imagine I have many informations about 'Domains' such as Emails, phones, etc. My lists are long and it happens very often that I have the same domain (row) many times. No way to remember each time if I already filled the informations for this specific domain before.
THat's why I want to know if there is a way that ALL the informaitons on the Row of : Domain A will automatically be copied to another row where it will find another Domain A
The Conditional formatting (highlight duplicates) do part of the job by telling me where are the duplicates, but i need the other infos to be copied.
I have one workbook with two sheets. The first sheet contains the data in columns A & B. In Column A there are a number of values that are the same eg: A1,2,3,4,5 all equal "Home" A6,7,8 equal "Work". In column B there are "Comments" none which are the same.
I need a VBA that will search down column A in sheet one and find all the "Comments" for "Home" and transpose paste the comments into sheet 2 so A1 will be "Home" B1 will be the first comment, C1 the second comment, D1 the third comment and so on.
My sheet one will contain about 1000 different values in Column 1, so I need it to search for duplicates rather than the text "Home".
I work with large spreadsheets. I was hoping that someone would know how to create a macro that will take selected cells in column C and search all of column C for exact duplicate entries. The macro envisioned would let you select cells to test. If a dulicate entry is found I would need the macro to test the cells in column E against one another. If both C & E match exact (if possible maybe display the findings in a pop up box) I would like the macro to ask me if I want to delete the duplicate entry, if yes, delete the entire row. If no, skip it and move to the next one. If C but not E match I would need the macro to ask me to remove test cell. if yes, cut out the entire row of the TEST cell and paste it in a new sheet. If no skip it and move on.
Am I just dreaming or can this be done.
I have one column ("Account Number"). Each cell in this column has some combination of 8 numbers (all formatted as "General").
Here's what I need:
If an Account number appears once in said column, do nothing.
If an Account number appears 2,4,6 (any EVEN amount) times, make it a red font color.
If an Account number appears 3,5,7 (any ODD amount) times, make it a green font color.
What has been tried: Using the "Conditional Formatting" tool in Excel slows up the spreadsheet way too much (it's a big file).
how can i select only duplicates using a macro?
i have a list in which i have a set of duplicate values i need to select only the duplicate ones using a macro to have them worked on
Below is a short segment of my excel spreadsheet:
A B
1020.00242-89.84
1020 -88.11
1021 -85.3
1021.494-80.41
1021.49 -86.98
1030.04 -89.4
1030.042 -88.26
1030.94 -79.98
1030.933-81.5
1030.961-85.87
1040.0418-88.77
1040.391-87.3
1040.291-82.94
1040.016-84.12
1049.82 -84.7
What I need to do is write a macro that will find duplicates in Column A, within a changeable tolerance, say 0.1 (10%).
After finding all duplicates within a tolerance in A, I need to make another "Master" worksheet with the Duplicates from A, and their counterpart in B. So if A1 and A4 where within 10% of each other, the "Master" worksheet would contain:
A1 B1
A4 B4
using the values, giving:
1020.00242-89.84
1021.494-80.41
I tried using SUMPRODUCT and some other functions but just can't seem to put my finger on this one. I'm sure it's not hard and am overlooking something.