I'm having a hard time getting a MATCH formula to return the correct results. See attached workbook. I have a list of names and wish to look for the first 6 characters of each name in another list and return the row number that the 'MATCH' appears in. The formula I am having problems with is in column 'E' of the ' Analysis' sheet. I have entered the expected result in column 'F'.
View 2 RepliesHow this could be addressed.
Col. A = Article, Col.B = Part Number, Col.C = Location
I am currently using an index & match formula to create a search function. For example if I want to know what article number PLU547 has then I use
=INDEX(A3:A12,MATCH("*"&A19&"*",B3:B12,0))
This use of wildcard is fine until it comes to part number searches such as PLU54 (which is not in the list). In this instance the formula returns the first article number from the list that starts with PLU54. However, part number PLU54 is a code in its own right and I fear that using the wildcard approach needs a modification to limit the returns.
ARTICLE:
PART NUMBER
Location:
XCA123
PLU546
A1
[Code] ..........
Here is what I have so far:
=SUMPRODUCT(--(ISNUMBER(SEARCH("Red",A9:A56))),B9:B56,L9:L56)/SUMPRODUCT(--(ISNUMBER(SEARCH("Red",A9:A56))),B9:B56)
So in column A is the text string i.e Big Red Chiquita Apple
Column B is the dollar value
Column C is another variable.
If I want to find "Red" and "Apple" ONLY within same cell. What would be my best bet?
I am looking for a way, to search a cell that has a no more than 4 words sperated by a space, and if a match display it.
I had something like this:
IF(Search=LocationList,"true","False"
So the Locationlist is a list of locations that is brought from another sheet with this:
=Addresses!A3&" "&Addresses!B3
and i need to search the cells with in LocationList (about 4000 cells) for a match... is this possbile ?
I am building somewhat of a rudimentary search engine that looks for a name, address or unique identifier, using an Index Match formula that searches with a wild card:
=INDEX(Name,MATCH("*"&F3&"*",Name,0))
"Name": is the defined name for column C on a separate sheet.
F3: is "search field"
The current formula (above), only returns the first match. The source data is only 927 lines so not overly large. I would like to have an additional page that will show the potential results from the wildcard search via a formula. Therefore needing results; 2, 3, 4, 5 etc. from the Index Match. I have searched high and low for solutions but I have found none in regards to retrieving multiple results from a wildcard search, only on a specific term.
Is it possible to use the wildcard in an IF formula? For instance, I have a spreadsheet with text and numbers in the cells, the number of characters varies in the cells so a left, right or mid is out. I want the formula to look to the cell and if any part of the text contains "ABC" then I want to return 1. =IF(C18="*ABC*",1,"") Cell C18 containts the letters ABC in order but my formula is still returning blanks?
View 4 Replies View RelatedHi I have this formula:
View 3 Replies View RelatedI'm trying to use a "WildCard" in an Array Formula to both simplify and handle variations in several formulas.
My work sheet is used for Time Cards. I have a tab for each of the 52 weeks in the year and each tab is labeled "W1", "W2" for Week 1, Week 2, etc.
On my SUMMARY tab, I'm using an array formula that looks at cell "'SUMMARY'!D6" for a project number, and than searches through all of the Week Tabs for anyone that has charged time against that project.
The employee would enter the project number in D12:D35 of a given weeks tab with each row representing a different task for that week. In some cases they may have several rows for the same project number.
On the SUMMARY tab, the formula for Week 1 is in cell E6. For Week 2 it's in F6, etc.
I was thinking I could simply place the sheet tab name in the row above (i.e. D5, E5, F5, etc., and then write the formula for 1 cell and copy it to all of the other cells on that row.
Currently my formula looks like:
{=IF($D$6="","",SUM(IF('W1'!$D$12:$D35=$D6,('W1'!$N$12:$N$35))))}
I was thinking the formula might look like:
{=IF($D$6="","",SUM(IF('&E5&'!$D$12:$D35=$D6,('&E5&'!$N$12:$N$35))))}
But that isn't working.
Additionally I was hoping to do something similar on the SUMMARY tab by referencing a different spreadsheet with something like:
='[&A1&]Sheet1'!$B$51
Where cell A1 has the value "Time Sheets - 01-17-09.xls"Currently the formula looks like:
='[Time Sheets - 01-17-09.xls]Sheet1'!$B$51
But this isn't working either.
i am having some difficulty modifing some existing code which is this: It will count all entries from G14 to G217 if *Ost* is in E14:E217
View 3 Replies View RelatedI have a formula in column J that is the following:
=IF(I541="",IF(ISNUMBER(SEARCH(LEFT(G541,4)&"*"&RIGHT(G541,4),H541)),G541,""),"")
See screenshot:
I need to replace "G542" in the formula above. For example, in cell J541 shown above, I need it to output "1996-1999|2000-2001" instead of "1996-2001" I need the output to include LEFT(G541,4)&"*"&RIGHT(G541,4)
There might be an easy solution for this, but I can't seem to figure it out. I'm trying to do a vlookup with the lookup value being #CFDMSMCSA*4. But the lookup table also has a value #CFDMSMCSAM4 in it.
It keeps returning the value for this #CFDMSMCSAM4 because of the * in the first string. Any ideas.
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
In sheet 1, I have
Col A Col B
John Sedgwy - R
In sheet 2, I have the following names
Col A Col B
Peter Walker
John Sedgwicky
When I did an array match -> ={MATCH(1,(TRIM($a2)=Sheet2!$A$1:$A$2)*(left(b2,5)&"*"=Sheet2!$b$1:$b$2),0)}
gave me an error but when I did an individual match to both John and Sedgw, it works.
I currently have a spreadsheet with two sheets. The first is my reporting sheet and the second is called Stores. I currently am using the following formula in the reporting sheet:
View 3 Replies View RelatedHave a cell that says something like "123 main street".
I want the cell next to it to = Main if it detects main in the other cell and if not then it should say no. I tried this.
=if(B2="*main","Main","No"
However, it is not working.
I transferring data from the mainframe and some data has ????. I can not replace them with something else because excel think it is wildcard. The reason for this request is I was trying to count the number of cells that has ???? and the count was something different each time. If you want to have fun try it out. It will count ?, ??, ??? but not ????.However my question would be how to change this (????) to some thing like unknown...
For Each rngC In rngJbn
rngC = Trim(rngC)
If rngC.Value <> newvalue And rngC.Value <> "ab-" Then
'MsgBox "****" & rngC & "***"
Résultat = Application.CountIf(Range("C2:C" & Range("C" & Rows.Count).End(xlUp).Row).SpecialCells(xlCellTypeVisible), rngC)
MsgBox rngC & " " & Résultat & " " & i
End If
newvalue = rngC.Value
Next
The idea
[Code] .....
Dropdown list
-------------
O11 = "Land" , "Sea"
P11 = "A - H" , "I - O" , P - Z"
Directory = C:MammalsLandA - HDate_120313 - Carnivore - Code_A3622
The list of filenames in the "A-H" folder has different dates and codes, how do I go about fixing wildcard *Carnivore* so that regardless of the date and code, there will be a match.
list of files in A-H folder
------------------------
Date_120313 - Carnivore - Code_A3622
Date_030213 - Herbivore - Code_A2231
Date_051212 - Hybrid - Code_A4431
How to use this wildcard in a IF statement.
[Code] ......
I have a column I'm adding a value to another cell if a piece of text is found in the column I'm looking in. The * is not working at all.
The use of * as a wildcard in excel can be extremely useful, however, can it be turned off? I work in the education sector and am currently number crunching GCSE results. When it comes to calculating A* grades versus A grades, B grades, etc, I cannot seem to do it because of the wildcard.
I have tried everything I can think of to get this to work.
I am searching column B for anything containing "Tease", then if found, look to see if column J contains a "W".
Excel doesn't report an error, but this doesn't work:
=SUMPRODUCT((B3:B40="*Tease*")*(J3:J40="W"))
As far as I know, a wildcard can't be used in an "if" statement. I have a list of "job names" that vary slightly from time to time. When we use a Bunnings "(building account) people give a job name such as "121 William Drive". Sometimes however, the person in the store spells it incorrectly. Is there a way to find a wildcard in the following manner?
Find any word that begins with "121" and ends in "ve"
In a1 it says: "121 wilaim jnes drive" I have tried the following formula in b1:
=IF(a1="121*ve","yes","no")
Why does it say "no"? Is there a formula for using wildcards in an "if" statement?
Trying to count how many cells in column b contain a value.
using
Application.WorksheetFunction.CountIf(Range("B:B"), "" * "")
getting a type mismatch error.
I was wondering is there away where i can lookup A:A anything begging with Ves* ? and then i need to copy the formula down to pick up the next one in the list
im guessing something like =VLOOKUP(A:A,"Ves*") but i havent got a clue
In a recent thread, I learnt how to import HTML, using ADO into Excel.
To import the relevant variables, my code is as below: ...
I need to lookup data from four different columns to match a value in another sheet. The lookup value has to start with "4" in order for it to be the correct match. I've tried the following formula for just two columns:
=IF(VLOOKUP($C2,'Sheet 1'!$D$2:$H$10000,5,FALSE)="4*",VLOOKUP($C2,'Sheet 1'!$D$2:$H$10000,5,FALSE),IF(VLOOKUP($C2,'Sheet 2'!$E$2:$G$10000,3,FALSE)="4*", VLOOKUP($C2,'Sheet 2'!$E$2:$G$10000,3,FALSE),"False"))
The problem I have is that the wildcard function isn't working in my If statement (apparentley that's how Excel was designed). The first vlookup returns the value "40042565" but Excel doesn't show it matching the criteria with the wildcard ("4*").
Any way to lookup the value in C2, search through multiple columns, and return the value that starts with "4"?
We have an ISP based antispam system which can sometimes incorrectly pickup messages as Spam. I would like to scan through all quarantined messages every week to check that this does not happen. I can export a report from the program to excel but what I would like to do is remove subject lines with common spam words (Viagra, Russian etc) so I don’t need to check these, this would in effect reduce the report by 85%.
Ideally the ‘spam word’ list would be on the second sheet as in example and could be added to as I find obvious words.
The ideal end result would either be all lines which have a word from the ‘Spamwords’ sheet are removed or all lines which do not match the words in the spam list are copied to a new sheet.
I've this question, how do i extract a part of the text using wildcard(example "ID=") in the string in the whole columns and copy to other columns or delete the unwanted.
Below is a example which i create for better understanding.
I've been looking around for a way to use the countif function in excel with a wildcard, I have a excel list with a column containing data which looks like: ....
View 12 Replies View RelatedI am trying to return how many cells contain a string of text as entered by the user but I am struggling to put wildcards around my search term. Below is the code I have so far.
Code:
Dim search as String
Dim occurance As Integer
search = InputBox("Search for", "Search Term")
occurance = WorksheetFunction.CountIf(Cells, search)
MsgBox (occurance)
I have a spreadsheet where there are lines of different Wage Types but only certain combinations are needed. For example I have Pay Area 1234 which needs all wage types except those beginning with a 9.
To do this I have set up Sheet1 to look like this:
12341
12342
12343
12344
12345
12346
12347
12348
and not 12349 as I do not require this type.
The problem here is I need to add a wildcard to the end of these so it finds anything that starts with 12341 etc.
Sheet1 contains the personal details of employees and I have concatenated the Payroll Area and Wage type in column D.
Code:
Sub deleterows()
Application.ScreenUpdating = False
Set MySheet = Sheets("data")
LR = MySheet.Cells(Rows.Count, "D").End(xlUp).Row
For i = LR To 2 Step -1
[Code]...