I have a formula in column J that is the following:
=IF(I541="",IF(ISNUMBER(SEARCH(LEFT(G541,4)&"*"&RIGHT(G541,4),H541)),G541,""),"")
See screenshot:
I need to replace "G542" in the formula above. For example, in cell J541 shown above, I need it to output "1996-1999|2000-2001" instead of "1996-2001" I need the output to include LEFT(G541,4)&"*"&RIGHT(G541,4)
i am having some difficulty modifing some existing code which is this: It will count all entries from G14 to G217 if *Ost* is in E14:E217
View 3 Replies View RelatedTrying to look for formula for searching through Range and search through Data to achieve expected res
Data Output ExpectedRange
Pune 123 is city Pune 123 Mumbai 999
Maharashtra 345 is state Maharashtra 345Pune 123
India 678 is Country India 678 Nagpur 666
Maharashtra 666 is state OthersPune 555
Below is the query i used for manual search however need formula to see through Range and achieve output expected
=IF(ISNUMBER(SEARCH("Pune 123",A5)),C5,
IF(ISNUMBER(SEARCH("Maharashtra 345",A6)),C6,
IF(ISNUMBER(SEARCH("India 678",A7)),C7,"Others")))
I have a spreadsheet where there are lines of different Wage Types but only certain combinations are needed. For example I have Pay Area 1234 which needs all wage types except those beginning with a 9.
To do this I have set up Sheet1 to look like this:
12341
12342
12343
12344
12345
12346
12347
12348
and not 12349 as I do not require this type.
The problem here is I need to add a wildcard to the end of these so it finds anything that starts with 12341 etc.
Sheet1 contains the personal details of employees and I have concatenated the Payroll Area and Wage type in column D.
Code:
Sub deleterows()
Application.ScreenUpdating = False
Set MySheet = Sheets("data")
LR = MySheet.Cells(Rows.Count, "D").End(xlUp).Row
For i = LR To 2 Step -1
[Code]...
I have numerous formulas that use a macro with an indirect cell reference, for example:
INDIRECT(macro(A21))
I am moving these formulas to a different workbook and I need them to still refer to items in the old sheet. I accomplish this by using this formula:
INDIRECT(CONCATENATE("OtherSheet.xls!",macro(A21)))
This works. However, I need to do a global search and replace for all of these formulas without deleting my indirect cell reference. I could replace
macro
with
CONCATENATE("OtherSheet.xls!",macro
but that would leave me short a ).
Is there a way to use a wildcard to accomplish this? It does not seem that replace
macro(*)
with
CONCATENATE("OtherSheet.xls!",macro(*))
picture this.
Cell A1 = xyz3
Cell B1 = 5
Cell C1 = xyz3-hgfe-56f
I need to do a vlookup on C1 in range A1:B1 that will return B1 if C1 contains the string in A1. I've tried using the TRUE variable in the vlookup formula which does not require an exact match. This works for about 80% of my data but is not 100% accurate. Of course I've got a long list of data ... not just the 3 cells.
I need to get rid of the questions marks in the text on my sheet, but am unable to get my VBA code to search for an actual question mark and not the wildcard. I'm using the replace function as follows:
wsReport. Cells = wsReport.Cells.Replace("?", "")
1. What's the trick to searching for wildcard characters?
2. Is there a slicker way to do this?
I have a list of titles that I would like to see if these titles appears in another cell.
Here is the example:
A1
Manager
Assistant Manager
Manager, II
VP
Vice President, Sales
Assistant
Associate
I would like to see if it appear in this cell, regardless where it is the exact text match
B1
Manager, Assistant, VP, Sales
So the result will be like: Screenshot_1.png
I'm trying to perform a search of over 15,000 entries using a wildcard. Sheet1 is a list of streets in the county where I live, and I would like to be able to type a part of the name that will return every instance of that name appearing.
I found a code which i have tried to adapt, but it is not working.
[Code] ....
The item being searched will be entered into TextBox1, and I'm guessing that the error I am receiving is in the .AutoFilter Field:=1, Criteria1:=TextBox1"*" line of code. This is the original sample I found onlne:
[Code] .....
where they were only looking for the letters "GB".
I have a sheet with Names in it. I need to look those names up and find which org they belong to. The problem is the the names have many characters after them, and many names belong to a few orgs, with a the rest belonging to many orgs. (See below)
I have been trying to get a Vlookup to work, but since it can't go left, it won't look up the orgs that don't own at least three names. And I can't get the search to work on the names.
Names:
WSGHG1-8410YFH
WSSMXG-8401B8T
NBSMXG-0310V6R
NBXG-0310V6V
[code]....
I would like to search for a certain pattern that appears in a cell. For example, I have certain cells that begin with a 7 digit project code (Ex: "1234567 - Project Red"). I was planning to use an IF inside a FOR loop and then do an action when I find the cell with the pattern. I thought I remember it being something like Format(########*) so that I have the wildcard on the end since there is more than just the numbers. how to make other patterns work such as Number-Letter-Number or Capital-Lowercase-Capital
View 3 Replies View RelatedI am trying to run a routine in VBA that will Search for a Part-No. that normally contains asterisks. It is giving me bad positive Search results due to the coding looking at the (*) asterisk's as a wildcard character.
The following Part-No.'s are located in cells (C11:C16):
9L3Z*17757*BCP
6C3Z*16138*AACP
AE5Z*16138*B
AE5Z*17E811*CF
AE5Z*17E811*F
AE5Z*17E810*F
Part-No. to be Searched for:
AE5Z*17E811*F
When the below code is run, the incorrect Part-No. 'AE5Z*17E811*CF' is found in cell (C14) rather than the correct Part-No. found in Cell (C15).
Code:
'The following 2 lines are defaulted for ease of coding
pNumb = "AE5Z*17E811*F"
Range("C11", "C16").Select
[Code] ......
I am looking for a way, to search a cell that has a no more than 4 words sperated by a space, and if a match display it.
I had something like this:
IF(Search=LocationList,"true","False"
So the Locationlist is a list of locations that is brought from another sheet with this:
=Addresses!A3&" "&Addresses!B3
and i need to search the cells with in LocationList (about 4000 cells) for a match... is this possbile ?
I am building somewhat of a rudimentary search engine that looks for a name, address or unique identifier, using an Index Match formula that searches with a wild card:
=INDEX(Name,MATCH("*"&F3&"*",Name,0))
"Name": is the defined name for column C on a separate sheet.
F3: is "search field"
The current formula (above), only returns the first match. The source data is only 927 lines so not overly large. I would like to have an additional page that will show the potential results from the wildcard search via a formula. Therefore needing results; 2, 3, 4, 5 etc. from the Index Match. I have searched high and low for solutions but I have found none in regards to retrieving multiple results from a wildcard search, only on a specific term.
Here's what I'm trying to do hopefully you can help me.
1) Given value in Sheet 1: Column A, search for that value in Sheet 2: Columns A:C. Then output the value in Sheet 2: Column D of the same row, to Sheet 1: Column B
2) Same setup as above, but the same given value is found multiple times, then have say 1st value output to column B, second to C, third to D, and so on.
I have a spreadsheet (called “output”) with a single list of unique account numbers in column A. In columns B, C, D (column B = Invoice, column C = Sales, column D = class), I need to add information from a data file based upon certain search criteria which is as follows:
For each account number I need to list an invoice number and the corresponding sales amount and class. I need to list the invoice with the “highest” sales amount. There is only one catch to the issue I am encountering and this is I need to first look for the highest amount in Class A sales, if no Class A sales, then look for the highest in Class B sales….and then Class C….and then Class D. If there are no sales in Class A, B, C, or D, then return a value of “no match found”.
Attached is a sample of what I need completed.
Monthly, I have to do a chart just like this except slightly more complicated.
In the Sample download, there are three charts, "Sample Chart", "Sample Input", and "Desired Result".
"Sample Chart" has a list of accounts from different companies, The first column being their number, the second being their name, and the third being the money they spent.
The "Money Spent" Column is always blank when I start for ALL companies.
I have another chart, "Sample Input", which contains the prices that I'm supposed to put in "Sample Chart, Money Spent" column.
The thing is, "Sample Input" only has the companies with prices listed.. Not all companies have prices, so this means the "Sample Input" is always a shorter list than "Sample Chart".
What I need is the prices from "Sample Input" to be put in the correct position in "Sample Chart". The "Desired Result" chart is what I want it to look like.. exactly like that!
When I do this monthly, I have to scroll through several thousand accounts doing this.
Suggestions:
- Possibly have a macro or formula take the Account # in "Sample Input".. Sample it in "Sample Chart", then copy the price and paste it in the right location.
- Possibly make "Sample Input" have blank rows inserted in the places where it should have the account with no prices.
see the attached 'Example' excel sheet.
I'm not the best at explaining, but I think that the excel sheet is pretty straight forward.
In Sheet2, cells C3 and D3 are manually entered by the user. I am looking for a formula for B3 that will take the information entered into C3 and D3, find the row in Sheet1 in which column C=Sheet2!C3 and column D=Sheet2!D3, and give the unique corresponding result from Sheet 1 for that row in column B .
So, for example,
if C3=A and D3=102, then the result would be 444
if C3=A and D3=104, then the result would be 111
if C3=B and D3=102, then the result would be 111
The combination of C3 and D3 is always unique and will never have more than one possible result in column B of Sheet1.
Is it possible to use the wildcard in an IF formula? For instance, I have a spreadsheet with text and numbers in the cells, the number of characters varies in the cells so a left, right or mid is out. I want the formula to look to the cell and if any part of the text contains "ABC" then I want to return 1. =IF(C18="*ABC*",1,"") Cell C18 containts the letters ABC in order but my formula is still returning blanks?
View 4 Replies View RelatedHi I have this formula:
View 3 Replies View RelatedI'm trying to use a "WildCard" in an Array Formula to both simplify and handle variations in several formulas.
My work sheet is used for Time Cards. I have a tab for each of the 52 weeks in the year and each tab is labeled "W1", "W2" for Week 1, Week 2, etc.
On my SUMMARY tab, I'm using an array formula that looks at cell "'SUMMARY'!D6" for a project number, and than searches through all of the Week Tabs for anyone that has charged time against that project.
The employee would enter the project number in D12:D35 of a given weeks tab with each row representing a different task for that week. In some cases they may have several rows for the same project number.
On the SUMMARY tab, the formula for Week 1 is in cell E6. For Week 2 it's in F6, etc.
I was thinking I could simply place the sheet tab name in the row above (i.e. D5, E5, F5, etc., and then write the formula for 1 cell and copy it to all of the other cells on that row.
Currently my formula looks like:
{=IF($D$6="","",SUM(IF('W1'!$D$12:$D35=$D6,('W1'!$N$12:$N$35))))}
I was thinking the formula might look like:
{=IF($D$6="","",SUM(IF('&E5&'!$D$12:$D35=$D6,('&E5&'!$N$12:$N$35))))}
But that isn't working.
Additionally I was hoping to do something similar on the SUMMARY tab by referencing a different spreadsheet with something like:
='[&A1&]Sheet1'!$B$51
Where cell A1 has the value "Time Sheets - 01-17-09.xls"Currently the formula looks like:
='[Time Sheets - 01-17-09.xls]Sheet1'!$B$51
But this isn't working either.
I'm having a hard time getting a MATCH formula to return the correct results. See attached workbook. I have a list of names and wish to look for the first 6 characters of each name in another list and return the row number that the 'MATCH' appears in. The formula I am having problems with is in column 'E' of the ' Analysis' sheet. I have entered the expected result in column 'F'.
View 2 Replies View RelatedHow this could be addressed.
Col. A = Article, Col.B = Part Number, Col.C = Location
I am currently using an index & match formula to create a search function. For example if I want to know what article number PLU547 has then I use
=INDEX(A3:A12,MATCH("*"&A19&"*",B3:B12,0))
This use of wildcard is fine until it comes to part number searches such as PLU54 (which is not in the list). In this instance the formula returns the first article number from the list that starts with PLU54. However, part number PLU54 is a code in its own right and I fear that using the wildcard approach needs a modification to limit the returns.
ARTICLE:
PART NUMBER
Location:
XCA123
PLU546
A1
[Code] ..........
There might be an easy solution for this, but I can't seem to figure it out. I'm trying to do a vlookup with the lookup value being #CFDMSMCSA*4. But the lookup table also has a value #CFDMSMCSAM4 in it.
It keeps returning the value for this #CFDMSMCSAM4 because of the * in the first string. Any ideas.
Here is an example of my spreadsheet: Excel example.xlsx
I would like to get all the bid/ask quotes for the different currency pairs in sheet 2 into sheet 1 sorted by the right date and time.
I need a formula which recognize the time + the currency from sheet 1 and search for it in sheet 2 then brings the right bid/ask quote back into sheet 1.
How do you write a code that will calculate a formula and output the result in a cell?
For example:
A1 = 1 (Named "Cell1")
A2 = 2 (Named "Cell2")
A3 = Results of macro for Cell1+Cell2 = 3
Is there a way to write it if I also want B3 = B1 + B2 and C3 = C1 + C2, etc.
I am trying to get a list of states, based on their expiration date.
I have all 51 states listed, some states have 2, 3 or more licenses, so I created a column that I hid of the state abbreviation, for the use of formulas.
If the license expires in 30 days or less I want to display the state abbreviation. I couldnt figure out how to do an array output, so this is what I am trying to come up with.
=IF(COUNTIF('Kevin Doyle'!F5:F250, "
In column A i am using the following formula to output "Our Apple" when "Apple" is in column D and "Our Banana" when "Banana" is in column E:
[Code] .....
I would like the formula to also output "Big Apple" immediately underneath "Our Apple" when its present, and output "Big Banana" immediately below "Our Banana" when it is present.
The yellow column is how column A should look after the formula edit.
Attached File : Book2.xlsx‎
I have a fomula field in row 67 and 68 .Row 67 calculates the average and row 68 calculates the improvement i.e. average(row 68)- last row inserted(row 67). The values for improvements are not showing correct value. C68 seems to give correct value but B68 and D68 is giving wrong value.
B68=4.8-4.5 =0.3 but it shows 0.4
C68=14.9-15.1=-0.2
D68=11.3-10.2=1.1 but it shows 1.0
I have attached the sheet also.
Sheet 1.xlsx
I'm using "Mangal" Hindi font for entering the data but I'm not getting Hindi numbers in the output by formula. The output is in English numbers which I want in Hindi numbers. The marks are in Hindi numbers but the output is in English numbers.
The remark in column "bz" should be in English.
How to get the output in Hindi numbers.
