Is it possible to have a message box with a variable amount of messages in?
In the following code I want to create a message box where if the flag is true it displays a message in the box.
Because of this the box could have 1 line or 4 lines or anything inbetween. Is this Possibe?
Dim CompanyNameFlag As Boolean
Dim OnsiteContactFlag As Boolean
Dim ContactNumberFlag As Boolean
Dim AlternativeContactFlag As Boolean
When i try to run the code below i get the error message - object variable or with block variable not set-
Sub REFRESHXX()
'LIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1, Criteria1:="1"
'SET RANGE
Dim sFormula1 As String
Dim sFormula2 As String
Dim sCell1 As String
Dim sCell2 As String
Dim sSheet1 As String
Dim sSheet2 As String
Dim r As Range
Dim MyRange As Range 'for testing
With Sheets("Points")
sFormula1 = .Range("CY1").Formula
sFormula2 = .Range("CY2").Formula
End With
'FORMULA IN R1C1 STYLE
strFormula = "=IF(ISNA(VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE)),0,VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE))"
'ENTER FORMULA IN ALL CELL RANGES
r.FormulaR1C1 = strFormula
'REDUCE TO VALUES
Dim ar As Range 'an area is a range
For Each ar In r.Areas 'areas are discrete, contiguous ranges of cells
ar.Value = ar.Value
Next ar
'UNLIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1
End Sub
I have some code to open up another workbook, take the data from sheet1 in it, copy it to a sheet in the first book, and then close the opened workbook. My problem is that whenever it closes the workbook it gives me the large amount of data on clipboard window that I must then click 'No' on before it will proceed. I thought that making CutCopyMode = False would fix that, but it hasnt worked. Heres the bit of code that does this:
CutCopyMode = False
Workbooks.Open Filename:= _
"G:InventoryInventory.xls"
Range("A1:M500").Select
Selection.Copy
Windows("Inventory Report.xls").Activate
Sheets("Vis-W").Select
Cells.Select
ActiveSheet.Paste
Range("A1").Select
Windows("Inventory.xls").Activate
CutCopyMode = False
ActiveWindow.Close
Sheets("Main").Select
I'm trying to run some code but I keep getting the Object Variable or With Block Variable Not Set message. I'm not using any object in the line that is causing the error.
I'm getting an error on the last line of given code
Code:
Private Sub addDescriptions(BucketTotal as Double, Descriptions as String)
Dim DCELL as Range
'''Loop Through Controls'''
For i = 1 to 20
if Controls("TR" & i).Value = "" Then
Exit For
Else
Set DCELL = Columns("F").Find(Controls("DivRate" & i), Lookin:=xlValues, Lookat:=xlWhole).Offset(0,3)
I'm trying to enter the summation formula into three columns that vary in placement based on the value of num_objs. Basically, the number of grey columns in each of the three sets will equal num_objs. I want the user to be able to enter values into the grey columns in the middle section and the values of the two rightmost white columns (with '0's in them currently) will change accordingly.
My current code is below. However, I keep getting a compile error saying "Expected: end of statement". I've been searching for a solution online for a couple days now, and I don't see how my code is different than what I've been seeing of other people using variables in their formulas.
I have a list with a variety of numbers:
a) some with large units (never more than 10 units long) and possibly also decimals,
b) others with minimal units but long decimal characters,
c) and others containing both.
I need a formula that can be applied to each individual number, that removes a variable amount of decimal places, resulting in a maximum character length of 14 (i.e. sometimes removing a few decimal places, other times removing a substantial amount of decimal places). Removed decimals are displayed in red in the following example
a) 1234567890.123456789
b) 1.2345678901234567
c) 123456.789012345678901234567890
How can one change the cell values of a worksheet by creating a setup page in another worksheet. Example: the worksheet value is =average(E7, F7, G7, AQ7)*0.6 -- which this formula makes 60% of the average. On the setup page or worksheet I want o change value of *0.6 to say *0.5 for all the cell that has this value. In other words form the setup all the values will change on the related worksheet from the setup page.
View 5 Replies View RelatedIn many cells, a dollar amount (variable lengths) was pulled into the cell. I am trying to use the RIGHT function to remove it but my formula isn't working. A cell example and formula example are below.
P31 = "$693.00 Research and analyze case law regarding Motion in limine reply"
=RIGHT(P31,LEN(P31)-LEFT(P31,FIND(" ",P31)))
This returns an error, no matter how much I think (wish) it should do what I would like it to.
I am acquiring multiple spreadsheets that do not always match row number, due to additional information on some sheets. By this I mean that the information may be in row 31 on on sheet and row 39 on another, the column location is the same each time. I have been trying Vlookups, indexing and matching plus combination formulas - with no luck. How to get the information I need with a moving cell reference?
I can provide a small copy of a workbook, if needed.
I have a table that looks like:
7300
3
7301
2
7302
5
And I am trying to make a macro that will go concatenate the first 3 columns of all rows in worksheet 7300, the first two columns of all rows in worksheets 7301, etc, and insert them into column A of each corresponding worksheet.
Is there a macro to close this msg box:
"There is a large amount of information on the Clipboard. Do you want to ...."
I wish for the default to be no which I believe will be FALSE. But I do not know the command
I am writing a code wherein I want to assign specific excel range to a declared variable and then paste this excel in outlook message ody but I am finding difficulty in assigning that range to variable " brng"
I think code is right and issue is there in excel setting.
Code:
Sub mailer()
'
'
'
Dim Ash As Worksheet
Dim brng As Range
Dim OutApp As Object
Dim OutMail As Object
'Windows("Copy of FF RPL REPORT_JULY").Activate
[Code] .......
I am trying to come up with a way to print out data that is variable in the amount of rows to print.
1. Cells C1 thru M6 is heading of report
2. Cells C7 thru M400 all have formulas and display information only when criteria in Column C in each row is met, if condition is not met it displays no informtion. (There lies my problem).
I need a way to print out only the area that information is displayed in and skip the areas that are not displayed. (Currently I have hard coded the print range using the largest report)
I need a formula to calculate the amount due based on cumulative sales once a breakpoint amount is reached.
Example:
Breakpoint:
cum sales are > 500 pay at 3%
cum sales are >1,000 pay at 2%
month/ sales/ cumul sales/ amount due
jan/ 100.00/ 100.00/ 0
feb/ 600.00/ 700.00/ 6.00
mar/ 600.00/ 1,300.00/ 18.00
and so on...until the end of year.
I tried using an if formula by could not get it to work.
Im trying to set up an active running inventory sheet where: (A)the progressive daily sheet cells reference back to the corresponding master sheet cells fluctuating the master values, (B) the same progressive daily sheet cells reference back to a cummulative totals-cell based on whether I added or subtracted inventory. I want to make a copy of the blank "sheet 2" with all of the formulas and move it to the end of the workbook each day and enter new values which will reference back to the master sheet so that I can click on a date sheet and see an individual day's values or click on the master sheet to see the fluctuating inventory on-hand and the cummulative +/- totals of all days combined. I've got a couple hundred individual cells to reference. I've tried and tried but I can't make it work. Heres what I need to do:
I need to reference individual cells from "sheet 2,3,etc" back to a corresponding cell in a master sheet. But I need the values in each cell in "sheet 2,3,ETC" to increase or decrease the corresponding cell values in the master sheet. For example: If the value in the master sheet B5 is 200. Then in sheet 2, I enter +50 in B5, I need the master sheet cell B5 to increase by 50 to 250. I also need a way to decrease the cell value in the master sheet B5 if I enter a negative value -50 in sheet 2 B5. I also want to know if I can reference the same cell values entered in "sheet 2,3,etc cell B5" back to totals columns C5 for adding inventory or D5 for subtracting inventory in the master sheet where the master totals columns would reflect cummulative totals added or subtracted. For example: if the value in sheet 2 B5 is +50, then the value in Master sheet C5 would add 50 to a progressive total. But if the value in sheet 2 B5 is -50 then the value in master sheet D5 would add -50 to a progressive total.
For the below macro.
ABCDG
CodeTotalBaseNetA1 = 20%
A110083.3316.67A2 = 10%
A2350318.1831.82A3 = 7%
A3220205.6114.39A0 = 20%
A015015030
A1 is the code, take the total(B) and calculate the base(C) on the percentage given in the G, net = B-C. for A2 and A3 it is the same process.
For A0 the total (B) is equal to Base(C) and calculate the net on the given percentage in G.
how do u add error message, so that if you do not put the correct type of value in a input box and a error message should come for you to re do it again
error message should not take letters, signs etc onli numbers and if number 0 is entered it should stopped.
if it is at all possible (and if so, how) to CREATE your own error message in Microsoft Excel.
Basicaly, I am wanting to create an error message if two cells' figures do not match up.
I have set up some cells with formulas to be worked out in the future. But the #VALUE! error message appears because there is nothing to work out yet! I've attached the sheet
View 5 Replies View RelatedIs there a way to disable all error pop up messages from coming up due to an invalid entry in a cell that has data validation? So when a user types in a value, it doesn't pop up saying "retry, cancel, etc"? Just to save time and make it more user friendly, it would be nice to just dis-allow the entry, so when someone types an incorrect entry it just erases it or stays on the cell and keeps it highlighted but doesn't let you click away...something like that. This would be applied to the whole workbook and is for XL07.
View 10 Replies View RelatedI have a Macro that opens numerous excel files.
What code do I require to cancel the startup message?
ie. The message that displays "Disable / Enable Macros" (security setting cannot be changed, so message is always displayed).
Plus I then have some startup message boxes which I manually click OK to continue, but how do I cancel this messages using VBA Code?
Is there a way to turn off those annoying error message boxes that pop-up when a line of code is incorrect? I pretty frequently go to another area of code to grab some previous code to copy and paste, and the error message box pops-up, so I have to hit OK to close it. It would be nice if it still highlighted the problem red, but I'd even give that up for those boxes to go away.
View 5 Replies View RelatedI'm trying to create a more user friendly (and easily updated) gantt chart for marketing campaigns running throughout the year. The difficulty is that we have approximately 100 products and each product can have anything up to 20 campaigns per year (never overlap, though, fortunately).
Campaign data is on one row per product in columns B:CC (each campaign consists of start date, end date, name and volume) but these are hidden from the user. The conditionally formatted chart runs from CD2:QD108 and is predominantly based on the start and end dates.
When any coloured cell is selected I want the relevant campaign name to be displayed, like a data validation message.
I have put a macro in my spreadsheet to clear all hyperlinks it works great but now I keep getting the privacy warning message.
I have set the macro settings to accept all and put the spreadsheet in the trusted locations......but the warnings still keep coming
I do not want to turn off all messages just this one.
I have a total box which should add up to 720 when other cells have data entered.
Is there a way that I could put up an error message if the total is not 720 in that cell when someone tries to save the worksheet?
Or maybe for eg, cell A1 does not add up to 720, if they then try and move on to cell A50, the message would appear then?
I'm guessing this is not (easily) possible, but I thought I might just ask in case: Can we change the messages in VBA run-time errors displayed by Excel. Better yet, I would like to avoid the Excel generated error box, and just have a text message written into a particular cell.
View 5 Replies View Relatedevery time i choose Action X, i have a series of warning messageboxes appear. i want to run some code so that default option for each message box is selected every time a message box appears. this way i don't need to press Enter every time for each message box.
View 4 Replies View RelatedIs there a way to have a reminder/warning message pop up before a user leaves a specific sheet?
I need users to sort a tool list before they leave the sheet and move on to a different sheet?
The name of the sheet is "Unit Tools". The command button is named "Sort Tool List"
I have set up a macro that opens a set of about 20 excel files, one at a time,and then copies select sheets, and then pastes into a different main spreadsheet. After each sheet is opened and copied/pasted, I close it out and open the next one. My problem is I keep having to click through messages while the macro is running. I encounter the following messages:
1. Do you want to save (file that I opened and copied from)?
2. The formula or sheet that you want to copy contains the name "asdf.." which already exists on the destination worksheet. Do you want to use this version of the name?
3. A box comes up that says update values from this file:
4. There is a large amount of information on the clipboard. Do you want to be able to post this information into the clipboard later?
I would rather ignore all of these message boxes, but my answers to them are as follows:
1. No i do not want to save
2. Yes I want to use that version of the name
3. I want to select cancel out of this
4. No i do not want to be able to post that information.
Is there any way I can automate this?
I need to disable all kinds of messages that could appear in front of the user when it opens the workbook. I am already using DisplayAlerts=False and On Error Resume Next? Can we also do this through excel application itself and not using VBA ?
View 6 Replies View Related