Find Amount In Variable Call Locations That Change On Each Spreadsheet
Feb 15, 2012
I am acquiring multiple spreadsheets that do not always match row number, due to additional information on some sheets. By this I mean that the information may be in row 31 on on sheet and row 39 on another, the column location is the same each time. I have been trying Vlookups, indexing and matching plus combination formulas - with no luck. How to get the information I need with a moving cell reference?
I can provide a small copy of a workbook, if needed.
View 1 Replies
ADVERTISEMENT
May 13, 2014
I have a spreadsheet on a server, password protected, and certain columns, rows locked...
This is shared with 6 others and can only be accessed one at a time.
If It so that when the user saves the spreadsheet it saves over itself on the server it's located AND on the individual users computer as backup; how would I go about doing this!?
View 3 Replies
View Related
Jul 5, 2013
Trying to copy records from one spreadsheet to multiple spreadsheets located in different directorates. Although I can create multiple Macros to address the need, I want to use ONE MACRO that utilizes two variables to represent:
1) The targeted file directory
2) The targeted file name
Items 1) and 2) are stated in two cells within the main spreadsheet and as you can already imagine, these values change IAW the name of the target file.
This is what I am trying to do:
File cell A1 = "C:ORLOAcquisition"
File cell A2 = "target.xlsx"
Basically replacing the code below
ChDir "C:ORLOAcquisition"
Workbooks.Open Filename:= "C:ORLOAcquisition arget.xlsx" , UpdateLinks:=3
with, ChDir ""A1"" Workbooks.Open Filename:= ""A2"" , UpdateLinks:=3
I was able to do it with target-spreadsheets located under the same workbook but my code does not work when trying to activate workbooks located in other directorates in the network.
View 2 Replies
View Related
Nov 10, 2006
Say you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
View 5 Replies
View Related
Mar 29, 2012
I have two worksheets that Data might be present,
Holdtickets and "another sheet"
Here is my code:
Code:
Dim i As Long
Dim LastRow As Long
Dim wsEachSheet As Worksheet
Const strDestSheetName As String = "Hold Tickets"
Const strDestSheetName2 As String = "Enter Order"
[Code] ........
I don't want to show the location as being the worksheet "Hold Tickets" so i had to remove it from the search, But the data is still important
I need a macro code that will locate the data in "another sheet" and return the values from there, but if it is also present in the worksheet "Hold tickets" then
This part of the code will need to look like this:
Code:
Sheet1.Range("B7").Value = wsEachSheet.Name & "Hold Tickets"
View 1 Replies
View Related
Apr 5, 2011
I am in sales and we currently have a excel spreadsheet with call tracking and a sales tracking on it. I would like something a little more inviting. We have quotas that we have to meet. 100 calls a month, 20 quotes to put out, $11k is sales.
I was thinking maybe something that was broke down by week for calls. The sales and quotes, have a graph associated with them. When we type in the dollar amount it will raise the graph that much. I think this will make it easier to manage. I have attached what our call tracking looks like now.
View 3 Replies
View Related
Feb 7, 2014
I am trying to run different macros by clicking various different buttons on the sheet, I then want different data to load into the user form depending which button was pressed. So I have buttons named "SV_1" and another named "SV_2". when either button is pressed then it runs a common macro that gets the name of the calling item. then I want to add "Macro" to the beginning of the calling item name and then call that macro. here is the code that I am working with, when using a watch i can see the value of the variable is "MacroSV_1" when button 1 is pressed but I cannot get it to run the Sub.
VB:
Public ClkBtn As String
Public CallMacro As String
Sub ItemCall()
[Code] ......
View 5 Replies
View Related
Aug 12, 2008
I'm playing around with the Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean) function. I have a list of people in Column D that I'd like to move data around if the user double clicks on a cell in Column D. The list is about 158 rows long, and could grow beyond that. I've gotten lazy typing:
If Intersect(Target, Range("D4") Is Nothing Then
Exit Sub
Else
{My Code Here}
End If
If Intersect(Target, Range("D5") Is Nothing Then
Exit Sub
Else
{My Code Here}
End If
Etc, Etc, Etc
What I was hoping to do is use a variable (t) to cycle through the rows and call the various functions. So what I came up with is:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Application.ScreenUpdating = False
On Error Resume Next
Dim t As Integer
Dim Subtest As String
For t = 4 To 158
Subtest = "D" & t
I've created Sub D4(), Sub D5(), and Sub D6() as a test. This didn't work at all as it's looking for a Subtest(). Also, clicking on D5, D6, didn't do much either. Is there any way to make this cycle work, or should I keep typing away?
View 9 Replies
View Related
Sep 8, 2007
I have 46 drop downs that I need to call from a main sub. I want to create one loop that will call each one to perform its function. Below is a simple example of what I am trying to do, but where I need help is with the 'Call Y' line. I am not sure what character to use to tell excel to look at what is in the value of Y, not 'Y' itself
Sub testitout()
Dim y As String
For X = 1 To 2
Sheets(" Lookup"). Range("E3").Value = X + 4
y = "dropdown" & X & "_change()" 'this will return "dropdown1_change()" for the first loop
Call y 'i want to call dropdown1_change() below
Next
View 9 Replies
View Related
Jul 31, 2014
I need a series of cells to increase by varying amounts after each month, however this needs to happen automatically so if I send the spreadsheet to someone else, it will update for them automatically. I'm hoping that I can set up a function that will ONLY increase the cells after 4 weeks after they select a date from ANOTHER drop down menu (i.e they select the starting date from cell A1 - then input their starting numbers into other cells which then increase on that same date, 4 weeks later).
The cells that need to increase already have a formula in them as well; as this number is their predicted 1RM based off formulas in other cells.
I will attach a screen shot when able.
View 2 Replies
View Related
Feb 23, 2013
I'm trying to call another sub with a variable string. I'm using excel 2007. I get the error "Compile Error: Expected Sub, Function, or Property" on the "Call" code. The want the code to run multiple different subs based on user input. For example if they typed "this" it would run the t sub, then h sub, then I sub and finally the s sub.
Code example
Dim Uncvrtdtxt as string
Dim SubName as string
Dim i as integer
Uncvrtdtxt = "this"
For i =1 to Len(Uncvrtdtxt)
SubName = Mid(Uncvrtdtxt, i, 1) & "Route"
[code]....
View 7 Replies
View Related
Jan 18, 2007
I have a code below which need some input from user. This input will also be serve as the input of the subroutine which i am going to call. However, i do not know how to go assign this input to the subrountine which i will be calling, can anybody help ?
For example, the "input" variable will also be served as an input in subroutine test2 ...
View 6 Replies
View Related
Nov 11, 2013
I am creating a spread sheet with a large amount of data.
In column a I have a list of managers, in B I have a list of employees and C, I have a list of activities that have been recorded throughout the day.
What I want to do is create a list (on a new sheet) so in column A that would bring back all the managers. Then in column B, bring back the employee that is tied to the manager from column A and finally in column C, bring back the activity that is tied to the employee.
I know how I can do this by doing list validation with INDIRECT, but with the large amount of data that I have this would take forever in a day.
Is there an easier and quicker way to do this?
View 1 Replies
View Related
Feb 9, 2009
I'm trying to design a spreadsheet to allocate an amount to different bands.
For example - I have the figure 1750.
Band 1 : 0-500 (1)
Band 2 : 501-1000 (0.8)
Band 3 : 1001-1500 (0.6)
Band 4 : 1501-2000 (0.4)
Each unit in each band has a value (in brackets). So as you can see, the value of a full Band 1 would be 500. But the next band is only worth 400 when full, and Band 3 is only worth 300. I want band 1 to fill up first, then band 2, then band 3, then finally band 4.
I would like to be able to allocate the figure 1750 to all the bands automatically - starting with band 1, then 2, then 3, then 4.
View 9 Replies
View Related
Feb 3, 2009
The attached file contains a simplified version of a more complex macro in which a sub routine will be called a number of times to change the colours of cells in different ranges. However, an error is triggered because the a variable and range are not defined in the subroutine although they are in the main part of the macro.
I know I am missing something obvious here, but I'd appreciate any help in knowing how I can define the ranges in the main procedure and then call the subroutine to change values in the different ranges.
View 6 Replies
View Related
Apr 5, 2007
Is it possible to have a message box with a variable amount of messages in?
In the following code I want to create a message box where if the flag is true it displays a message in the box.
Because of this the box could have 1 line or 4 lines or anything inbetween. Is this Possibe?
Dim CompanyNameFlag As Boolean
Dim OnsiteContactFlag As Boolean
Dim ContactNumberFlag As Boolean
Dim AlternativeContactFlag As Boolean
View 6 Replies
View Related
Mar 3, 2007
The master has rows corresponding to numbered files:
4300 | CellValue1 | CellValue2 | etc
4301 | CellValue1 | CellValue2 | etc
In attempting a simple formula (a couple VBA codes I tried did not work and were probably substantially more than I needed anyway), I made the following:
='CMain FolderSub Folder[concatenate(cell w/file number,".xls")]Sheet1'!A1
This is identical to the copy/paste link formula currently in use except that I am trying to have the actual file number/name generated off the master list instead of what is in the file itself.
Purpose: in case I was not clear on this above, I am trying to automatically populate the master worksheet with the data from the workbook. The current procedure is to copy a line of the data from the workbook, then paste as a link in to the master worksheet on the row corresponding to the file number.
View 6 Replies
View Related
Jun 3, 2009
I'm trying to enter the summation formula into three columns that vary in placement based on the value of num_objs. Basically, the number of grey columns in each of the three sets will equal num_objs. I want the user to be able to enter values into the grey columns in the middle section and the values of the two rightmost white columns (with '0's in them currently) will change accordingly.
My current code is below. However, I keep getting a compile error saying "Expected: end of statement". I've been searching for a solution online for a couple days now, and I don't see how my code is different than what I've been seeing of other people using variables in their formulas.
View 2 Replies
View Related
Jul 2, 2013
I have a list with a variety of numbers:
a) some with large units (never more than 10 units long) and possibly also decimals,
b) others with minimal units but long decimal characters,
c) and others containing both.
I need a formula that can be applied to each individual number, that removes a variable amount of decimal places, resulting in a maximum character length of 14 (i.e. sometimes removing a few decimal places, other times removing a substantial amount of decimal places). Removed decimals are displayed in red in the following example
a) 1234567890.123456789
b) 1.2345678901234567
c) 123456.789012345678901234567890
View 6 Replies
View Related
Jun 22, 2008
How can one change the cell values of a worksheet by creating a setup page in another worksheet. Example: the worksheet value is =average(E7, F7, G7, AQ7)*0.6 -- which this formula makes 60% of the average. On the setup page or worksheet I want o change value of *0.6 to say *0.5 for all the cell that has this value. In other words form the setup all the values will change on the related worksheet from the setup page.
View 5 Replies
View Related
Jun 27, 2014
I want to be able to call one user form from multiple ActiveX command buttons. The problem is, the number of command buttons depends on user input on another worksheet, so it's variable.
I've renamed all of the command buttons so they are named "CommandButton" & i, where i is an integer between 1 and, say, 200. I want each of these buttons to direct to the same UserForm where additional information can be entered.
I can't think of a way around the event-handler procedure name.
Sub [Command Button Name]_Click
to call the User Form. I won't know the command button names, because I won't know how many there are (max i) until the user inputs.
Basically, I want to create a For loop through the max i and have the event-handlers call the user form
View 14 Replies
View Related
Dec 27, 2011
I'm using Excel 2010. One spreadsheet I'm using has 1048576 lines and is a XLSX file. The other file has 65536 lines and is also a XLSX file. When I try to do a VLOOKUP, I'm given an error stating "invalid reference. This file version cannot contain formulas that reference cells beyond 256 columns or 65536 lines.
If both are XLSX files how do I expand the amount of columns in the one spreadsheet with 65536 lines? I thought all XLSX files had a million lines.
View 4 Replies
View Related
Jul 3, 2014
In many cells, a dollar amount (variable lengths) was pulled into the cell. I am trying to use the RIGHT function to remove it but my formula isn't working. A cell example and formula example are below.
P31 = "$693.00 Research and analyze case law regarding Motion in limine reply"
=RIGHT(P31,LEN(P31)-LEFT(P31,FIND(" ",P31)))
This returns an error, no matter how much I think (wish) it should do what I would like it to.
View 4 Replies
View Related
Jul 23, 2014
I have a table that looks like:
7300
3
7301
2
7302
5
And I am trying to make a macro that will go concatenate the first 3 columns of all rows in worksheet 7300, the first two columns of all rows in worksheets 7301, etc, and insert them into column A of each corresponding worksheet.
View 7 Replies
View Related
Jul 22, 2009
Is there a way to call a subroutine anytime any control is changed within a userform?
For example,
I have a userform that needs to go through and add/multiply almost every value in every textbox and also add together values associated with checkboxs. I need this to happen anytime a textbox value is changed or a checkbox is checked.
View 4 Replies
View Related
Jun 5, 2007
After doing a search, I need to ask an Excel 2003 question. I'm creating a tool to open three sparate workbooks. One is the driver and I need to use it to pull data from the second and then to place that data along with additional data into the third.
My driver data may consist of a single value or multiple values separated by semi-colons in a cell. A single value works fine. The first value in a multi-value condition works fine. the second find, however, gives me an object error. I'm using the " split" verb to separate the values. Here's my code. Have you any idea why the second find is throwing up this error when the first find works correctly?
varData = Split(strRef, ";", -1)
For J = 0 To UBound(varData)
varSrchVlu = Trim(varData(J))
' do the ARIS Exrtact matching
Workbooks(strManualFile).Activate
Workbooks(strARISExtract).Activate ' Activate ARIS Extract
Sheets("Processes").Cells(2, 1).Activate
Workbooks(strARISExtract).Sheets("Processes").Range("A2").Select
Workbooks(strARISExtract).Sheets("Processes").Columns("A:A").Select
View 3 Replies
View Related
Feb 25, 2014
the formula or Vba code to change the amount in figure to words.
View 1 Replies
View Related
Aug 14, 2014
So I'm dragging my formula down one cell and as expected the reference cell changes the same amount when I really want the reference to shift Down that column 11 cell so when I take my formula
=IF(ISERROR(LOOKUP(21474836472147483647,'Revenue Book'!L5:L11)),"",(LOOKUP(21474836472147483647,'Revenue Book'!L5:L11)))
when I drag it down one cell the reference should look like this
=IF(ISERROR(LOOKUP(21474836472147483647,'Revenue Book'!L16:L22)),"",(LOOKUP(21474836472147483647,'Revenue Book'!L16:L22)))
View 5 Replies
View Related
Jul 20, 2009
Yes, another homework for you guys. I have found the code to open the "Find and Replace" dialogue box but is it possible to open it with "within:" Workbook instead of Sheet?
This is the code that open up the dialogue box ..
View 6 Replies
View Related
Feb 22, 2008
I need some code to do the following.
Look at worksheet 1. Find column "Amount". Insert column next to amount.
For all highlighted cells in column "amount" insert text "R" in adjacent (inserted) column.
View 9 Replies
View Related
