Right Unction But Removing Variable Dollar Amount At Beginning?

Jul 3, 2014

In many cells, a dollar amount (variable lengths) was pulled into the cell. I am trying to use the RIGHT function to remove it but my formula isn't working. A cell example and formula example are below.

P31 = "$693.00 Research and analyze case law regarding Motion in limine reply"

=RIGHT(P31,LEN(P31)-LEFT(P31,FIND(" ",P31)))

This returns an error, no matter how much I think (wish) it should do what I would like it to.

View 4 Replies


ADVERTISEMENT

Removing Variable Amount Of Decimal Places

Jul 2, 2013

I have a list with a variety of numbers:

a) some with large units (never more than 10 units long) and possibly also decimals,
b) others with minimal units but long decimal characters,
c) and others containing both.

I need a formula that can be applied to each individual number, that removes a variable amount of decimal places, resulting in a maximum character length of 14 (i.e. sometimes removing a few decimal places, other times removing a substantial amount of decimal places). Removed decimals are displayed in red in the following example

a) 1234567890.123456789
b) 1.2345678901234567
c) 123456.789012345678901234567890

View 6 Replies View Related

Dollar Amount

Mar 9, 2009

How can I display the $xx.xx into a statement?

I have these $ amounts in column A:
99.12
107.65
14500.99

Have the result in column B as:
Please Pay Exactly$00000xx.yy
(where xx is tenth, hundreds, thousands and yy is the cent)
00000 is to prevent forgery

and to have the results in column C using same column A:
Please Pay Exactly$0000xxDollars and yycents
For example like Please Pay Exactly$000099Dollars and 12cents
or Please Pay Exactly$000014500Dollars and 99cents

View 9 Replies View Related

Dollar Amount Inventory

Sep 3, 2008

I have a total inventoried product dollar amount in a cell. I have 4 other cells with different dollar amounts in each for product I inventory out! In the seperate balance column, as I use a letter ...

View 7 Replies View Related

Adding 1 Dollar Amount To All Cells

Jan 6, 2010

I have the new USPS rates in an excel sheet. I need to add my handling fee to all of the new rates. Is there a way to quickly add this same .70 to all cells?

View 2 Replies View Related

Concatenate Dollar Amount, Keep Decimals

May 21, 2008

When concatenating a text and dollar amount that is the sum of two cells, adding up to $42.90, I only get "42.9". is there a function (perhaps similar to ROUND) that will make sure concatenated numbers always have 2 decimal places?

View 4 Replies View Related

Split One Large Dollar Amount To Multiple Cells?

Apr 11, 2014

I have a group trip coming up where we took in a $1000 deposit per person. The total amount is only in the main members cell. There will be two more payment amounts coming. I need to make certain each person has paid the total amount they are required for the trip. There are two possibilities for total trip amount. Double occupancy is $15,500.00 and Triple is $14,500 per person.

There is a unique Identifier for each registrant, except when there is a multiple person under one registration the identifier has all the same number except at the end. I figured out a way to strip the number down to just show the same number in one registered group. There could be up to 10 people under one registration. I might not have the best option for breaking down the Identifier number, but thought it would be a good start. Used the code Left(column, number).

Issue is this. How can I now take the total number of people under one group take the total deposit and split it between just that unique group so I can then determine what is still owed after payments are made.

View 1 Replies View Related

Searching For And Extracting Dollar Amount From Text String

May 8, 2014

I have about 2000 rows of text. Each row is a short write up about prospective new business. There is a reference to a projected dollar amount Within 'MOST' of the write-ups. In order to generate a report about the potential dollars being projected, I need to find an easy way to extract the dollar amount from the text.

In most cases, the projected dollar amounts are preceded by "FY2014" then a "$". However, there are a handful of cases where there is no FY2014, but some variation of the year indicator. Most of the dollar amount entries are written is short text - FY2014 - $5k, 2014 $15k. While some others are written out - FY2014 - $ - $20,000. In still other cases, within the writeup reference is made to the amount of product projected to be shipped by using the dollar symbols. For example - Estimated ship totals $$ for FY2014 = $5k. I've tried writing some formulas, but as in the last example - the first dollar signs are recognized rather than the dollar sign immediately before the value.

Sample data -
Estimated ship totals $$ for FY2014 = $5K New Customer Prospect 4/9/2012 Customer has still not decided if he

2014 $15K Funco 4/7/14 working on the program for the demo ...

Over 130 samples tested with about 90% accuracy. FY2014 Ship $$ = $20,000 at least. Setter Line has 7 plants ...

View 4 Replies View Related

Prorate A Total Dollar Amount By A Selected Number Of Attendees

May 29, 2009

I need to prorate a total dollar amount by a selected number of attendees. How can I do that with code, I know the formula for excel, but how do I put that on my user form so it only does the math as a new entry is submitted? I do not want to have the formula on the spreadsheet which is my report unless there is an entry on the row, which will only be the case when a user completes the user form. I just do not want the div/# error on the sheet visible if at all possible.

View 2 Replies View Related

Removing Blank Spaces From The Beginning Of Cells

Jun 16, 2009

I'm compiling several old worksheets into a single database for a research study. The worksheets contain patient data. Some of the worksheets have the patient's last name, first name, and middle initial entered all in one cell like this: Smith,John R. Compounding the problem is the fact that sometimes the name is entered with a space between the comma and the first name, sometimes not.

I have formulas to break the name out into three separate columns "lName, "fName", "midInit". However, if the name in the original cell has a space between the coma and the first name, then the “fname” column will contain a blank space in front of the name. This is problem because patients names can appear in the database more than once. Some patients are in the database several times.

If patient “John R. Smith”, for example, is entered in the database as”

“Smith” “John” “R “

and also as

“Smith” “<space>John” “R”


then the database won’t recognize them as the same name when I search for John Smith’s data. Right?

If so, then I need a way to eliminate the empty spaces in front of the first names. Like I said, some have empty spaces and some don’t. I could do this by hand, but there are over 1000 entries in these worksheets.

View 2 Replies View Related

Looping Through One Column Of Data And Removing Text At The Beginning Before Hyphen

Feb 3, 2012

Some code below which I have inherited, basically its looping through one column of data and removing the text at the beginning before the hyphen eg. '123 - data text' to 'data text'.

HTML Code:
'Remove everything before the hyphen in the activity column
Dim SearchStr
Dim CharOffset As Variant
Range("c7").Select

[Code] ......

View 6 Replies View Related

Formula To Create Blank Cell Based On Dollar Amount In Another Cell?

Jan 7, 2014

Ok, basically C3 is a dollar amount. The default total for C3 is $0.00. If C3 is $0.00 then this formula cell will display a blank cell. If there is any other amount in C3 then the formula C3-C2 will run.

I tried this but it's not working:

=IF(C3="0","",C3-C2)

View 2 Replies View Related

If The Sum Of A Cell Is A Certain Text Then A Dollar Amount Populates Another Cell

Sep 5, 2009

Attached is an example. Office 2007 & 97 versions attached. If a drop down menu on one sheet selects a certain word, then on another sheet based on that selection a dollar amount is entered. I am guessing this would involve some if commands, I am really weak on making those.

View 2 Replies View Related

Removing Random Amount Of Values After The First Space From Right

Aug 15, 2014

I'm working on a big sheet in which I have values like the following:

Testtest 12345
Test 134691241
Testtestest 2385.234
Test test test 235
Testtest test 14.35172'36
T.E.S.T. test test 31246

What I need, is a formula removing anything after the first space (" ") from the right side, but I cannot seem to figure a way to solve the problem. I tried using SUBSTITUDE, REPLACE, FIND, LEFT, RIGHT, IF, COUNT, LEN formulas,

View 10 Replies View Related

Message Box With A Variable Amount Of Messages In

Apr 5, 2007

Is it possible to have a message box with a variable amount of messages in?

In the following code I want to create a message box where if the flag is true it displays a message in the box.

Because of this the box could have 1 line or 4 lines or anything inbetween. Is this Possibe?

Dim CompanyNameFlag As Boolean
Dim OnsiteContactFlag As Boolean
Dim ContactNumberFlag As Boolean
Dim AlternativeContactFlag As Boolean

View 6 Replies View Related

Summation Across Of A Variable Amount Of Columns VBA Formula

Jun 3, 2009

I'm trying to enter the summation formula into three columns that vary in placement based on the value of num_objs. Basically, the number of grey columns in each of the three sets will equal num_objs. I want the user to be able to enter values into the grey columns in the middle section and the values of the two rightmost white columns (with '0's in them currently) will change accordingly.

My current code is below. However, I keep getting a compile error saying "Expected: end of statement". I've been searching for a solution online for a couple days now, and I don't see how my code is different than what I've been seeing of other people using variables in their formulas.

View 2 Replies View Related

Variable Amount For Global Functions/Formulas

Jun 22, 2008

How can one change the cell values of a worksheet by creating a setup page in another worksheet. Example: the worksheet value is =average(E7, F7, G7, AQ7)*0.6 -- which this formula makes 60% of the average. On the setup page or worksheet I want o change value of *0.6 to say *0.5 for all the cell that has this value. In other words form the setup all the values will change on the related worksheet from the setup page.

View 5 Replies View Related

Removing Characters From A String Variable

Jun 12, 2006

Let us assume x and y are strings. Now let us make x equal to a small sentence (ie. full of words and spaces). I now need to somehow make y equal to x, but with the last word removed. I need to do this in VBA.

View 3 Replies View Related

Find Amount In Variable Call Locations That Change On Each Spreadsheet

Feb 15, 2012

I am acquiring multiple spreadsheets that do not always match row number, due to additional information on some sheets. By this I mean that the information may be in row 31 on on sheet and row 39 on another, the column location is the same each time. I have been trying Vlookups, indexing and matching plus combination formulas - with no luck. How to get the information I need with a moving cell reference?

I can provide a small copy of a workbook, if needed.

View 1 Replies View Related

Macro To Concatenate Variable Amount Of Columns Based On Cell Value

Jul 23, 2014

I have a table that looks like:

7300
3

7301
2

7302
5

And I am trying to make a macro that will go concatenate the first 3 columns of all rows in worksheet 7300, the first two columns of all rows in worksheets 7301, etc, and insert them into column A of each corresponding worksheet.

View 7 Replies View Related

Removing Single Variable Characters Within Cell

Jul 29, 2013

I need to remove the letter within the middle of a persons name.

For example, if the person is called 'Michael J Fox' then it needs to be edited to show only 'Michael Fox', if the person is called 'George W Bush' then only 'George Bush' should be displayed etc. However the persons name should remain as is if a middle character initial does not exist.

View 5 Replies View Related

Count The Number Of Entries For Only Those Beginning With "AA" Or Beginning With "BB"?

Feb 17, 2010

In column A, I have many entries such as AA-1, AA-2, BB-1, BB-2, AA-3, etc.

How do you count the number of entries for only those beginning with "AA" or beginning with "BB"?

View 3 Replies View Related

Print Out Data That Is Variable In The Amount Of Rows To Print

Apr 15, 2009

I am trying to come up with a way to print out data that is variable in the amount of rows to print.

1. Cells C1 thru M6 is heading of report
2. Cells C7 thru M400 all have formulas and display information only when criteria in Column C in each row is met, if condition is not met it displays no informtion. (There lies my problem).

I need a way to print out only the area that information is displayed in and skip the areas that are not displayed. (Currently I have hard coded the print range using the largest report)

View 6 Replies View Related

Formula- To Calculate The Amount Due Based On Cumulative Sales Once A Breakpoint Amount Is Reached

Jan 28, 2009

I need a formula to calculate the amount due based on cumulative sales once a breakpoint amount is reached.

Example:

Breakpoint:
cum sales are > 500 pay at 3%
cum sales are >1,000 pay at 2%

month/ sales/ cumul sales/ amount due
jan/ 100.00/ 100.00/ 0
feb/ 600.00/ 700.00/ 6.00
mar/ 600.00/ 1,300.00/ 18.00

and so on...until the end of year.

I tried using an if formula by could not get it to work.

View 9 Replies View Related

Reference Cell & Add Amount If Positive & Subtract Amount If Negative

Jun 5, 2008

Im trying to set up an active running inventory sheet where: (A)the progressive daily sheet cells reference back to the corresponding master sheet cells fluctuating the master values, (B) the same progressive daily sheet cells reference back to a cummulative totals-cell based on whether I added or subtracted inventory. I want to make a copy of the blank "sheet 2" with all of the formulas and move it to the end of the workbook each day and enter new values which will reference back to the master sheet so that I can click on a date sheet and see an individual day's values or click on the master sheet to see the fluctuating inventory on-hand and the cummulative +/- totals of all days combined. I've got a couple hundred individual cells to reference. I've tried and tried but I can't make it work. Heres what I need to do:

I need to reference individual cells from "sheet 2,3,etc" back to a corresponding cell in a master sheet. But I need the values in each cell in "sheet 2,3,ETC" to increase or decrease the corresponding cell values in the master sheet. For example: If the value in the master sheet B5 is 200. Then in sheet 2, I enter +50 in B5, I need the master sheet cell B5 to increase by 50 to 250. I also need a way to decrease the cell value in the master sheet B5 if I enter a negative value -50 in sheet 2 B5. I also want to know if I can reference the same cell values entered in "sheet 2,3,etc cell B5" back to totals columns C5 for adding inventory or D5 for subtracting inventory in the master sheet where the master totals columns would reflect cummulative totals added or subtracted. For example: if the value in sheet 2 B5 is +50, then the value in Master sheet C5 would add 50 to a progressive total. But if the value in sheet 2 B5 is -50 then the value in master sheet D5 would add -50 to a progressive total.

View 4 Replies View Related

Macro For Base Amount And Net Amount Calculation

Nov 20, 2012

For the below macro.

ABCDG
CodeTotalBaseNetA1 = 20%
A110083.3316.67A2 = 10%
A2350318.1831.82A3 = 7%
A3220205.6114.39A0 = 20%
A015015030

A1 is the code, take the total(B) and calculate the base(C) on the percentage given in the G, net = B-C. for A2 and A3 it is the same process.

For A0 the total (B) is equal to Base(C) and calculate the net on the given percentage in G.

View 1 Replies View Related

Round Down To 5th Dollar

Aug 9, 2007

I've searched but there are too many variations and scenarios people have posted/asked. If in cell A1 and the # is $99.99 to $95.01, how do I round down to the nearest 5th, $95. And is the formula possible for $999.99 ($995) or $653.22 ($650).

View 2 Replies View Related

Showing WithOUT A Dollar Sign

Nov 12, 2008

I am a new user both to Excel and these forums, but I am very glad they both exist! What I have is this (it is C13 for those playing at home):

View 4 Replies View Related

Time Value * Dollar Value Formula

Oct 10, 2009

On the attached worksheet, I want to multiply a dollar value from the selected drop down menu in column Z. I want to multiply it by the sum of two cells in column V. As and example: (V12-V11)*Z12 should = $1.80 (in AA12), but it keep coming up with 1.69

View 4 Replies View Related

Rounding To Nearest Dollar

Oct 16, 2007

How do I round $452.57 in cell A1 to $453.00? I want to format the cells to round to the nearest dollar and leave the .00 cents.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved