Code below. I need it to NOT run if the sheet week2 doesn't exist. Currently it gives a runtime error '9' out of range. This is due tot he sheet not being present because sometimes it is not generated.
Code:
Sub RemoveColWeek2sheet()
Dim ColNo As Integer
Dim rng As Range
Set rng = ThisWorkbook.Sheets("Week2").UsedRange
[Code] .........
I have several workbooks, and each has a different number of sheets (i.e. Pool1, Pool2, Pool3, etc...). One workbook may have the sheets named Pool1, Pool2, and Pool 4, but no Pool 3. Can I write code to ignore what is supposed to happen to the sheet "Pool 3" if the sheet doesn't exist.
View 9 Replies View RelatedI have a project to compare the months from January 2014 through to June 2014. What I am needing to do is Compare each month's sheet with June's sheet (Jun14) and if a row doesn't exist in Jun14 sheet then copy it to a new sheet. I need to keep the months seperate from each other so every time it compares a sheet to Jun14 it will copy the data that it doesn't see in Jun14 to a new sheet.
View 1 Replies View RelatedI run a macro to change many features on an excel sheet. I'm trying to include a command that searches for an excel sheet and if not found to skip over that command and proceed to search for the next sheet. If the second sheet is included, then to proceed in running the following code for that specific page.
1) Search if sheet is included
2) if no to sheet exisiting, then proceed to search for next sheet.
3) if yes to sheet existing, then run the code below.
and so on..........
I have a workbook, with an around 70 sheet. Every sheet presents a sample reprot supplied by my client, the 3rd row in every sheet holds the report's title, (actually, not the whole 3rd row is merged, only specific range of cells are merged and this range is different among the sheets, e.g.: In the first sheet, the cells B3:M3 are merged to hold the title where in the second sheet , the cells B3:N3 are merged)
Now i need to copy all these titles to a separate sheet,
if I have to un- merge the cells or re-merge the whole row, I will not mind, espically if I will get a quiker solution since i also have another 3 similar workbooks.
I have just opened a sheet in work and this phenomenon has occured. Basically the data validation: list appears to be referencing a sheet that doesn't exist! My initial thought is that the original sheet name had been changed, but on trial the list seems to change reference. I've checked that the sheets aren't hidden
View 2 Replies View RelatedI need to be able to check if a certain worksheet exists in the active workbook. If that worksheet does not exist I need to make it. I already have the code for creating a new worksheet but I'm not sure how to check if the worksheet already exists.
View 5 Replies View RelatedI am really new to using Excel macros and having an issue trying to insert data in a column where the data may or may not already exist. In Column A I have a list of product lines.
Prodline1
Prodline2
Prodline3
Prodline4
Prodline5
I want to search through this list and if Prodline1 does not exist, then add a Prodline1 row to the end of the list, then check for Prodline2, Prodline3 etc and do the same. On any given month I may or may not have data for the Prodline but I still need to see it in my list. I've tried this code below but only get data if I define an actual cell and it only works for the first one.
Set R = ActiveSheet.Range("A1")
endrange = Range("A65000").End(xlUp).Row
For i = 1 To endrange
[Code]....
I cannot figure out why the Count function counts blank cells.. Data adjacent to the blank cells were pasted from Access datasheet.
View 8 Replies View RelatedI have few questions,
1. why the "auto sum" icon grey out, and doesn't work.
2. when I right click the sheet, the menu doesn't show up.
3. Insert columns/rows, When I highlight 2 columns/rows, right-click the mouse & the menu doesn't show up for me to choose insert col/row.
I need to create a worksheet and then populate it with header row containing columns names, and with values starting at row2. Before I do all this I wanted to first create a spreadsheet, I was successful in getting this done by getting a piece of code from this website. But, what if spreadsheet already exists from a previous run, then, in that case I want to clear the contents. Before I get too far ahead, I am unable to escape runtime error 9, array subscript out of range whenever I use any sort of code to check if the sheet exists.
Also, my attempts to circumvent this error by putting in errorhandling is ignored, i.e. I get the standard run-time error message box, but, not what I want the code to do is such an error occurs.
Function wsExists(wksName As String) As Boolean
On Error Resume Next
wsExists = CBool(Len(Worksheets(wksName).Name) > 0)End Function
Private Sub Cmbsummary_Click()
On Error Goto ErrHandler:
'Worksheets("MySheet").Activate
Worksheets.Add(After:=Worksheets(Worksheets.Count)).Name = "MySheet"
Exit Sub
In the attached sheet, i would want to delete the text "ABC" because it is not contained anywhere in column A.
Couldnt find a macro on here for this...
I have two price lists in workbook. One containing "normal" price list, other containing "action" prices.
I want to search for a product name code from column A in "normal" price list in column A of "action" list, and if it is found to show it somehow in any column in "normal" price list sheet.
This way I know that there is action price attached to that product and that I have to search for the price in "action" sheet.
When I use the formula:
View 12 Replies View RelatedI have two price lists in workbook. One containing "normal" price list, other containing "action" prices.
I want to search for a product name code from column A in "normal" price list in column A of "action" list, and if it is found to show it somehow in any column in "normal" price list sheet.
This way I know that there is action price attached to that product and that I have to search for the price in "action" sheet.
I have a Sumproduct formula to count instances of a particular event (from a list of events) based on multiple criteria.
I am trying to utilize the same method to count instances of all events not defined in the list of events but I would welcome any solution
In the attachment,
Defined list of events A4;A5 (this is just an example, the actual list is approx 100 events)
Data being counted F2:N10 (actual data approx 1000 rows)
My working formula is in cells B4 through D5
My not working attempt to adapt the formula B6
I am using this code to generate a text to a directory, but I would like to know how to call a save as prompt if the directory doesn't exist?
[Code] ..........
If the folder macro does not exist, then it will prompt a message saying that the folder macro cannot be found, and the save as prompt will appear.
My problem is that I want to loop through a directory that contains csv files. The directory is dynamic so everytime could be a different number of files inside. I want the loop to go through each file and check if that file exists. If it doesn't to print a message that this specific files doesn't exist. Until now I got the following code:
[Code] .........
I guess I should somehow place the counter j inside the Dir path in order to check if everytime time the file[j] exists?
I have the following code that enters data from a user form, the problem is that the textbox (Locker) data will not validate when entered into worksheet.
Private Sub cmdEdit_Click()
Dim rownum As Integer
rownum = 2
'Prompt user with message box asking for input in both text boxes
If Me.txtNumber = vbNullString Then
response = MsgBox("Please enter a Work Number", vbInformation)
Me.txtNumber.SetFocus
Else
' Insert the work no., driver, locker, keys issued & keys On hand
ActiveCell = Me.txtNumber.Value
ActiveCell. Offset(0, 1) = Me.txtLocker.Value
ActiveCell.Offset(0, 2) = Me.txtIssued.Value
ActiveCell.Offset(0, 3) = Me.txtOnHand.Value................
I get the following error:
"Run-time error '1004': "cmc4906.xls" File cannot be found.
Check the spelling of the file name and verify that the file
location is correct."
I am not trying to open a xls file. The path is clear and there are no file names with extensions in the path name (C:Weekly). I'm unclear of why the code thinks its looking for file cmc4906.xls and a xls file at that.
Sub Import()
Dim inputfile As Variant
Dim path As Variant
path = ("C:Weeklys")
inputfile = Dir("C:Weeklys")
Do While inputfile <> ""
Workbooks.OpenText Filename:=inputfile, Origin:=437, StartRow _
:=1, DataType:=xlDelimited, TextQualifier:=xlDoubleQuote, _
ConsecutiveDelimiter:=False, Tab:=True, Semicolon:=True, Comma:=False, _
Space:=False, Other:=False, FieldInfo:=Array(Array(1, 2), Array(2, 1), Array( _
3, 1), Array(4, 1), Array(5, 2), Array(6, 2), Array(7, 1), Array(8, 1), Array(9, 1), Array(10 _.............
I had to remove a lot of pictures in the xls file in order to attach it, (since the original is about 5.3mb) but it worked out. When you move your arrow over the titles in column A a picture shows up thanks to a code. When you change the status in column G, the color changes together with the title in column A, as it should.
View 4 Replies View RelatedI have a number of similar templates on a server used to produce quotations from other files with lookup formulas. They all have 2 modules, 3 & 4. Module 3 deletes certain data and shows values instead of formulas for most of the pricing etc. Module 4 contains a macro that logs info in another central workbook on the server.
If 2 files are opened based on the same template at once, when the Quote_Wrapup macro (in module3) is run on one of the open files(code follows) from a button on the spreadsheet it often produces a Run-time error '9' Subscript out of range error.
Sub Quote_Wrapup()
'To stop screen flicker
Application.ScreenUpdating = False
Range("D8:E9").ClearContents
Range("D8:F9").Interior.ColorIndex = xlNone
Range("qdata5").Font.ColorIndex = 2
Range("qdata6").Font.ColorIndex = 2
Range("A18:A1018").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Columns("A:E") = Columns("A:E").Value
Range("A980") = Range("A980").Value...................
I have some code (probably a little inefficient, but still) that should delete any rows that contain nothing in column V. My problem is that it only deletes 1 row at a time:
Dim c As Long
Dim Limit As Long
Limit = Cells(Rows.Count, 11).End(xlUp).Row
For c = 2 To Limit
If Cells(c, 22).Value = "" Then
Cells(c, 22).EntireRow.Delete xlUp
End If
Next c
I have worksheet that contains the wording "Total For Page" in columns A:N. I would like to find that wording delete that row and 3 rows below it. found the code below that works, but I have to continually run it to find the wording and delete the rows. The code doesn't search all and delete in one shot.
[Code]....
In my first workbook I select an area to copy/paste into a new wb with this code (from the board)
[Set source = Range("A55:K109").SpecialCells(xlCellTypeVisible)
Dim FName As String
Dim VBComp As VBComponent
Dim wbnew As Workbook
Dim x As String
Set wbnew = Workbooks.Add
Set dest1 = ActiveWorkbook
dest2.Activate
With ActiveWorkbook
FName = .Path & "code.txt"
If Dir(FName) "" Then
Kill FName
End If
For Each VBComp In .VBProject.VBComponents
If VBComp.Type vbext_ct_Document Then
VBComp.Export FName
wbnew.VBProject.VBComponents.Import FName
Kill FName
ElseIf VBComp.Name = "ThisWorkbook" Then
If VBComp.CodeModule.CountOfLines > 0 Then
wbnew.VBProject.VBComponents
The complete code in this workbook sends the entire workbook to one person and it creates a new workbook and pastes a range and the VB code needed to run the button it copies and sends this to another person.
The codes runs excellent in 2003. In 2007 I can get the entire workbook to send to the first person, but
The email to the second person will send, but they can not open the workbook. I get the error "File Format or file extension is not valid. Please verify file is not corrput and that extension matches file.
I know trust access to visual basic has to be enabled in 2003 for this code to run, so in 2007 I went to the Excel options trust center and clicked the box which says Trust access to the VBA project object model.
When I step through this code everything looks great. The worksheet area is correct, the button is copied, the code can be seen in the properties window, but then I get the email and it will not open.
There is even a line of code that kills the file after the mail is sent (temporary saving location is the desktop). So, I used a ' and made it a comment line so I could try to open the file from my desktop. It will not open there either. File extension being used is .xlsm
I have below macro for Sheet2 and i have created a button on Sheet1.now whenever i press this button the macro will run and save Sheet2 as PDF file.
The problem is when i hide Sheet2 the macro doesnt work and it gives an error " Invalid procedure call or argument.
how to make this macro run even when the sheets are hidden ?
Sub PDF_Table()
'Sheet2.PageSetup.PrintArea = "$a$1:$x$140" '*****
'*** can remove the above line if sheet areas are already set and will not be altered
With Sheet2.PageSetup
.CenterHorizontally = True
.CenterVertically = True
.Orientation = xlPortrait
.Zoom = 60
[code]...
My company recently upgraded everyone to Microsoft 2010 from 2007 version. I have no substantial VBA skill and left with a VBA code which is supposed to extract a list of outlook emails sitting in a shared mailbox into Excel.
I was using that VBA code in Outlook 2007 and it worked fine but shows the following error when run in Outlook 2010: 'Run-time error '-2147221233 (8004010f)': The attempted operation failed. An object could not be found. Here is part of the code:
[Code] .....
It worked after one of the members suggested to "click on any line of this code and press F8 repeatedly until the yellow focus moves to the error line, don't press F8 anymore. Now in immediate window, copy paste each of below lines, press enter after each line. Let us know where the error occur." However, it stop working the next day.
? olNS.Folders("Mailbox - Market Intelligence").Folders.Count
? olNS.Folders("Mailbox - Market Intelligence").Folders("Inbox").Items.Count
? olNS.Folders("Mailbox - Market Intelligence").Folders("Inbox").Folders("MI").Items.Count
The code below works correctly on certain sheets. The code is supposed to loop through worksheets in an array, calculate the percent change from 1990 to 2012 and from 2005 to 2012, and put the calculations on the 4th and 5th row from the last non-empty row, respectively. All the sheets are identical except for 3. The sheets that are different only have a different number of years of data. For some reason this causes the macro to put the percent change calculations in random rows below the correct location. Also, the macro doesn't work correctly on one of the identical sheets.
[Code] ......
Example of how the macro runs correctly on an identical worksheet : correct.gif
Example of how the macro runs incorrectly on one of the 3 sheets that are not identical : incorrect.gif
I asked for a macro to delete the whole row if a duplicate customer number was found in column B. Sometimes, though, my column numbers change. So, logically thinking, I simply changed the criteria, but the macro ONLY seems to work if duplicate customer numbers are in column B only.
This code below won't work if the Customer Number is in column D instead of B even if the reference of B:B is changed to D:D, it doesn't carry the macro over.?
I have a macro below where it looks at sheets name and deletes if Jan is not there.
I would like to change this a bit so that it looks for all 12 months (Jan to Dec) instead of looking for Jan only.
