I have few questions,
1. why the "auto sum" icon grey out, and doesn't work.
2. when I right click the sheet, the menu doesn't show up.
3. Insert columns/rows, When I highlight 2 columns/rows, right-click the mouse & the menu doesn't show up for me to choose insert col/row.
Code below. I need it to NOT run if the sheet week2 doesn't exist. Currently it gives a runtime error '9' out of range. This is due tot he sheet not being present because sometimes it is not generated.
Code:
Sub RemoveColWeek2sheet()
Dim ColNo As Integer
Dim rng As Range
Set rng = ThisWorkbook.Sheets("Week2").UsedRange
[Code] .........
I wonder if it is possible to make a macro that right clicks a cell and then chooses a option from the list?
View 11 Replies View RelatedI am really new to using Excel macros and having an issue trying to insert data in a column where the data may or may not already exist. In Column A I have a list of product lines.
Prodline1
Prodline2
Prodline3
Prodline4
Prodline5
I want to search through this list and if Prodline1 does not exist, then add a Prodline1 row to the end of the list, then check for Prodline2, Prodline3 etc and do the same. On any given month I may or may not have data for the Prodline but I still need to see it in my list. I've tried this code below but only get data if I define an actual cell and it only works for the first one.
Set R = ActiveSheet.Range("A1")
endrange = Range("A65000").End(xlUp).Row
For i = 1 To endrange
[Code]....
I cannot figure out why the Count function counts blank cells.. Data adjacent to the blank cells were pasted from Access datasheet.
View 8 Replies View RelatedI have several workbooks, and each has a different number of sheets (i.e. Pool1, Pool2, Pool3, etc...). One workbook may have the sheets named Pool1, Pool2, and Pool 4, but no Pool 3. Can I write code to ignore what is supposed to happen to the sheet "Pool 3" if the sheet doesn't exist.
View 9 Replies View RelatedI need to create a worksheet and then populate it with header row containing columns names, and with values starting at row2. Before I do all this I wanted to first create a spreadsheet, I was successful in getting this done by getting a piece of code from this website. But, what if spreadsheet already exists from a previous run, then, in that case I want to clear the contents. Before I get too far ahead, I am unable to escape runtime error 9, array subscript out of range whenever I use any sort of code to check if the sheet exists.
Also, my attempts to circumvent this error by putting in errorhandling is ignored, i.e. I get the standard run-time error message box, but, not what I want the code to do is such an error occurs.
Function wsExists(wksName As String) As Boolean
On Error Resume Next
wsExists = CBool(Len(Worksheets(wksName).Name) > 0)End Function
Private Sub Cmbsummary_Click()
On Error Goto ErrHandler:
'Worksheets("MySheet").Activate
Worksheets.Add(After:=Worksheets(Worksheets.Count)).Name = "MySheet"
Exit Sub
In the attached sheet, i would want to delete the text "ABC" because it is not contained anywhere in column A.
Couldnt find a macro on here for this...
I have a project to compare the months from January 2014 through to June 2014. What I am needing to do is Compare each month's sheet with June's sheet (Jun14) and if a row doesn't exist in Jun14 sheet then copy it to a new sheet. I need to keep the months seperate from each other so every time it compares a sheet to Jun14 it will copy the data that it doesn't see in Jun14 to a new sheet.
View 1 Replies View RelatedI have two price lists in workbook. One containing "normal" price list, other containing "action" prices.
I want to search for a product name code from column A in "normal" price list in column A of "action" list, and if it is found to show it somehow in any column in "normal" price list sheet.
This way I know that there is action price attached to that product and that I have to search for the price in "action" sheet.
When I use the formula:
View 12 Replies View RelatedI run a macro to change many features on an excel sheet. I'm trying to include a command that searches for an excel sheet and if not found to skip over that command and proceed to search for the next sheet. If the second sheet is included, then to proceed in running the following code for that specific page.
1) Search if sheet is included
2) if no to sheet exisiting, then proceed to search for next sheet.
3) if yes to sheet existing, then run the code below.
and so on..........
I have two price lists in workbook. One containing "normal" price list, other containing "action" prices.
I want to search for a product name code from column A in "normal" price list in column A of "action" list, and if it is found to show it somehow in any column in "normal" price list sheet.
This way I know that there is action price attached to that product and that I have to search for the price in "action" sheet.
I have a workbook, with an around 70 sheet. Every sheet presents a sample reprot supplied by my client, the 3rd row in every sheet holds the report's title, (actually, not the whole 3rd row is merged, only specific range of cells are merged and this range is different among the sheets, e.g.: In the first sheet, the cells B3:M3 are merged to hold the title where in the second sheet , the cells B3:N3 are merged)
Now i need to copy all these titles to a separate sheet,
if I have to un- merge the cells or re-merge the whole row, I will not mind, espically if I will get a quiker solution since i also have another 3 similar workbooks.
I have a Sumproduct formula to count instances of a particular event (from a list of events) based on multiple criteria.
I am trying to utilize the same method to count instances of all events not defined in the list of events but I would welcome any solution
In the attachment,
Defined list of events A4;A5 (this is just an example, the actual list is approx 100 events)
Data being counted F2:N10 (actual data approx 1000 rows)
My working formula is in cells B4 through D5
My not working attempt to adapt the formula B6
I am using this code to generate a text to a directory, but I would like to know how to call a save as prompt if the directory doesn't exist?
[Code] ..........
If the folder macro does not exist, then it will prompt a message saying that the folder macro cannot be found, and the save as prompt will appear.
My problem is that I want to loop through a directory that contains csv files. The directory is dynamic so everytime could be a different number of files inside. I want the loop to go through each file and check if that file exists. If it doesn't to print a message that this specific files doesn't exist. Until now I got the following code:
[Code] .........
I guess I should somehow place the counter j inside the Dir path in order to check if everytime time the file[j] exists?
I have the following code that enters data from a user form, the problem is that the textbox (Locker) data will not validate when entered into worksheet.
Private Sub cmdEdit_Click()
Dim rownum As Integer
rownum = 2
'Prompt user with message box asking for input in both text boxes
If Me.txtNumber = vbNullString Then
response = MsgBox("Please enter a Work Number", vbInformation)
Me.txtNumber.SetFocus
Else
' Insert the work no., driver, locker, keys issued & keys On hand
ActiveCell = Me.txtNumber.Value
ActiveCell. Offset(0, 1) = Me.txtLocker.Value
ActiveCell.Offset(0, 2) = Me.txtIssued.Value
ActiveCell.Offset(0, 3) = Me.txtOnHand.Value................
I have just opened a sheet in work and this phenomenon has occured. Basically the data validation: list appears to be referencing a sheet that doesn't exist! My initial thought is that the original sheet name had been changed, but on trial the list seems to change reference. I've checked that the sheets aren't hidden
View 2 Replies View RelatedI get the following error:
"Run-time error '1004': "cmc4906.xls" File cannot be found.
Check the spelling of the file name and verify that the file
location is correct."
I am not trying to open a xls file. The path is clear and there are no file names with extensions in the path name (C:Weekly). I'm unclear of why the code thinks its looking for file cmc4906.xls and a xls file at that.
Sub Import()
Dim inputfile As Variant
Dim path As Variant
path = ("C:Weeklys")
inputfile = Dir("C:Weeklys")
Do While inputfile <> ""
Workbooks.OpenText Filename:=inputfile, Origin:=437, StartRow _
:=1, DataType:=xlDelimited, TextQualifier:=xlDoubleQuote, _
ConsecutiveDelimiter:=False, Tab:=True, Semicolon:=True, Comma:=False, _
Space:=False, Other:=False, FieldInfo:=Array(Array(1, 2), Array(2, 1), Array( _
3, 1), Array(4, 1), Array(5, 2), Array(6, 2), Array(7, 1), Array(8, 1), Array(9, 1), Array(10 _.............
I have a number of similar templates on a server used to produce quotations from other files with lookup formulas. They all have 2 modules, 3 & 4. Module 3 deletes certain data and shows values instead of formulas for most of the pricing etc. Module 4 contains a macro that logs info in another central workbook on the server.
If 2 files are opened based on the same template at once, when the Quote_Wrapup macro (in module3) is run on one of the open files(code follows) from a button on the spreadsheet it often produces a Run-time error '9' Subscript out of range error.
Sub Quote_Wrapup()
'To stop screen flicker
Application.ScreenUpdating = False
Range("D8:E9").ClearContents
Range("D8:F9").Interior.ColorIndex = xlNone
Range("qdata5").Font.ColorIndex = 2
Range("qdata6").Font.ColorIndex = 2
Range("A18:A1018").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Columns("A:E") = Columns("A:E").Value
Range("A980") = Range("A980").Value...................
As said, the right click doesn't work anymore, last week it was working but it doesn't anymore. When I right-click wherever in the spreadsheet nothing happens but I know it's working because it works outside excel.
View 9 Replies View RelatedNeed code to allow the sheets in a workbook to be selected from the right click menu
View 11 Replies View RelatedI want to be able to give my application menu when the user right-clicks on a specific series of cells. I've already got the code that will limit the right-click options to the cells that I want.
How do I then form and execute the menu that I want the user to see - "Archive Data", "Edit Data", "Add Data", for instance, rather than the normal right-click menu?
I have been modifying the options available on my right click menu, getting rid of about half of what was there and adding items I use quite often like Paste Values, Paste Formats, Paste Formulas, Sort..., AutoSum, and Format as Percent, as well as adding group dividers. I have it just the way I want it, but I have one issue. If the clipboard is empty, all of the paste buttons are disabled on the Standard toolbar and in the Edit menu as are the Paste and Paste Special... items on the right click menu, but the new paste items I added to my right click menu are still enabled. If I click on one, I get a "PasteSpecial method of Range class failed" error because I have no range selected. I got around this by adding On Error Resume Next to the macros of my added paste functions - not elegant, but functional. Is there a way to have those items appear grayed out and disabled on my right click menu when the clipboard is empty as opposed to my current workaround?
View 9 Replies View RelatedQuestion regarding the disabling of right mouse button click options and have used the code below to disable and reciprocal code to enable options. The code works well in Excel 2003 but have recently used the spreadsheet in excel 2000 and the code causes a runtime error 5 'Invalid procedure call or argument'. how to amend the code to have it also work with Excel 2000.
With Application. CommandBars(" Cell")
.Controls("Cut").Visible = False
.Controls("Paste Special...").Visible = False
.Controls("Insert...").Visible = False
.Controls("Delete...").Visible = False
.Controls("Clear Contents").Visible = False
.Controls("Insert Comment").Visible = False
.Controls("Format Cells...").Visible = False
.Controls("Pick from drop-down list...").Visible = False
.Controls("Format Cells...").Visible = False
.Controls("Add Watch").Visible = False
.Controls("Create List...").Visible = False
.Controls("Hyperlink...").Visible = False
.Controls("Look up...").Visible = False
End With
I have acquired code to add an item to the right-click menu.
I have added my item using "before:=1", which works fine by putting the item at the top of the list of items in the menu.
My problem is that I require to add the same item ( obviously with a different name ) that needs to be at the bottom of the list.
The reason being, that the pop-up can either display downwards or upwards and I want the user to be in closest proximity of the item.
if it possible ) to add an item to the bottom of the list.
The line I need to change is:
CommandBars("Cell").Controls.Add(Type:=msoControlPopup, before:=1).Caption = "MyMacros2"
I created a right-click menu for userform textboxes from a code I found through googling. It works perfect, however, I don't know how to get it to work for more than one textbox.
Here's the code for the userform:
I made custom menu with these instructions: [URL]....
Problem is that when I right click my makro keeps copying itself. Ten times right click=ten my macro in the right click menu. It means that
Private Sub Workbook_Deactivate() doesn't work as it should be?
Is it possible to create a menu that could be called by a double click which would allow you to click on a value from that menu and insert it into the double clicked cell. I know I could use a data validation list, but that is tacky and you have to scroll down the list to find the data you would like. I'd like to have a menu pop up that stores different values in 6 columns and 25 rows. Any way without having to jump into an access database?
View 2 Replies View Related
