I have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.
View 2 Replies
I'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
Am trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.
if column a = bears and column b = colours of bears then
when I select bears in combobox one, combobox 2 would populate with colors of bear.
I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.
I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
When I make a comboBox selection from the dropdown menu, the menu stays down until the last statement of the comboBox code is finished. How do I make the dropdown disappear immediately after the selection is made?
View 9 Replies View RelatedI have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
View 5 Replies View Relatedtry and achive is when a user selects a item from the 1st Combobox the 2nd Combobox is the populated with the cell that is to the right of the selected item.
for Example if a user selects AAB from combobox1,, Combobox2 should populate with Belly.
Maby using combobox1_Exit for the excercise.
I created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.
Code:
Private Sub UserForm_Initialize()
Sheets("Sheet3").Activate
Dim ColARange As Range
[Code].....
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
How can i Loop through a combobox's values and compare to a string value and then set the listindex of the combobox to that value?
View 5 Replies View RelatedIs it possible that i fill the CB.list with range().value so the values are in Column 'A' and in Column 'C' and if i enter the field and select value then i see value from column 'A' & value in Column 'C'?
Then if i pick one value then the CB.value = the value from Column 'A' only, Can i solve it some how?
Carrying on from my calculation problem which now has been solved i am needing help with comboboxes
i have a combobox21 which i have made a dropdownlist ie Types of products from Product1 to Product 16 inclusive (i have sorted this)
i also have another 28 comboboxes, which of the 16 products i pick in combobox21 i need each of the other 28 comboboxes to display the the sub products
products and sub products are stored on sheet1 in the excel file as below
A B C D
1 Product1 Product2 Product3 Product4 etc .........
2 P1A P2A P3A P4A
3 P1AA P2AA P3AA P4AA
4 ETC ETC ETC ETC
So if i pick Product1 in Combobox21 then in each of the other comboboxes i need to be able to select P1A OR P1AA ETC .....
i have a named range of products A1 to O1 Called PRODUCTS
i will have to create 16 mores ranges for the items in each product but that is no problem
I have 2 combobox in userform. Both the comboboxes have the same list down value and I have applied as follows
VB:
combobox1.value = "Transport"
combobox1.value = "Paper"
combobox1.value = "Pencil"
Like this I have long list
In the combobox2 same list has been applied
Is there a way in which by one command the list is applicable to both the comboboxes, that would save me on the length of VBA.
I have a userform that I wish to be a front page for a work sheet containing personal staff information. I would like it to self populate according to a selection from a combo box (Surname). So far I am using the code below however where this code encounters those with the same surname it only displays the first row it comes across. Each row does have a staff ID number that is unique but I cannot search by this on its own as it would not be user friendly.
VB:
Private Sub ComboBox1_Change()
Dim r As Range
Set r = Sheet2.Range("A:A").Find(What:=ComboBox1.Text, lookat:=xlWhole, MatchCase:=False)
If Not r Is Nothing Then
[Code] .....
I need to base a combo box / TextBox on the result of the previous combo box.
1. The first combo box is a simple 2-option: "New" or "Exisiting" choice
2. If the answer is "New"; I need a TextBox to show which would allow the user to input a code
3. If the answer is "Existing"; I need a second combobox instead of the text box which will allow a selection of codes.
I want it to populate a combobox in a userform. Should it go in the code segment for the userform, in a module, or some other place? The following is code I originally found (by Leith Ross of this board) to find the last row in column "A", and load the combo box "ComboBox1"
View 3 Replies View RelatedI have a userform with a textbox and a combobox
textbox input will be a house number
combobox will be a list of all the street names that have that house number in my database
column Q are house numbers, column R are street names
when a user inputs a number into the textbox and tabs to the combobox,
for each cell in column Q of workbooks("proposals.xls").worksheets("database") that has the textbox1.value I want the cell value of .offset(0,1) to be added to the combobox.
I have more problem when work with three combobox, will you find me the code to solve this problem.
View 2 Replies View RelatedBasically I want it to look similar to the vehicle search on auto trader, or whatcar, where you first chose the make, then use a second combobox for the model (dependent on the choice made in the first combobx.
View 6 Replies View RelatedI am trying to add a list of items to a combo box which is in a user form using vba. Find the file as attached. My code is as follows: when i double click on the combo box it opens editor.( 4th item: Frequency )
Private Sub ComboBox1_Change()
With .ComboBox1
.AddItem "Y"
.AddItem "M"
.AddItem "D"
End With
End Sub
I have created a user form that needs dependent combo boxes. I have created multiple lists to use for different types of contacts and just want to use the if function to say that if combo box one's value is this, combo box two will use this list in its drop down box. This is what I have at the moment below.
cbosoi is combo box one and cboname is combo box 2. If I select Duty_manger from the first list I want it to point to the Duty_Manager list for combo box 2. It does that but it selects the duty manager list for anything I select in combo box one!
If cbosoi.Value = duty_manager Then
Me.cboname.List = Worksheets("lookuplists comms").Range("duty_manager").Value
End If
I'd like to say that this Forum is helping me very much when reading so many useful topics, get help from ppl here. From nothing I advanced my program very much. About my problem here:
I have an Excel Column with Dates (dd-mmmm-yy) and an UserForm/ComboBox. I'd like to add only the unique dates from the Excel Column to the ComboBox. The Excel Column Range is updating with new dates.
I tried to use RowSource but i don't know how to get the unique dates with RowSource. Maybe RowSource is not a good decision.
I am a total noob when it comes to userforms. I want to create a userform with a simple combobox that contains 4 different selections. Along with this combobox will be a Submit button and a Cancel button.
View 6 Replies View RelatedI'm attempting to add the values for a combobox and (2) text boxes to a list box on a form. The list has 3 columns. When I run code to add to the list box the values are added on separate rows instead of the same row. See code below and attached screen shot.
VB:
Private Sub cmdAddToList_Click()
Dim i As Integer
Dim iRow As Integer
If Me.cboParts.ListIndex = -1 Then Exit Sub
For i = 0 To Me.lstParts.ListCount - 1
[Code] ....
UserForm3.jpg
I have a combobox on a userform that I have set the columncount to 3, so it displays data from columns A, B, and C when the combobox dropdown is used. However, once someone makes a selection from the dropdown, only the item from the first column is displayed in the combobox. Is there a way for me to show the info from all 3 columns once a selection is made?
View 8 Replies View RelatedI have a Userform with 2 comboboxes.
combobox1 is filled with values. I want the user to select one from combobox1 and combobox2 get filled in with unique values based on combobox1
Sheets Quote has 2 columns
Customer Job
Stanley 1
Stanley 2
Fred 1
Stanley 3
Stanley 3
Stanley 3
Stanley 4
Fred 1
combobox1 is filled in with Stanley and Fred
based on the user selection (as an example Stanley)
I want combobox2 values to be 1,2,3,4 (having 3 listed only once)
Is there a way to modify the code below to verify that the (e) .offset(-1,0).value = combobox1
Is there a different option to use?
Code:
Public Sub fill_job_num()
Dim v, e
On Error GoTo error1
With Sheets("Quotes").Range("B2:B50000")
v = .Value
End With
With CreateObject("scripting.dictionary")
[code].....
Is it possible to create a data base with the given sample below?
COLUMN A
COLUMN B
COLUMN C
COLUMN D
COLUMN E
UNIT TYPE
CONDITION
NAME
TELEPHONE NO.
DATE
1+1
SALE
Name1
tel1
3-Oct-12
[Code] ...
The Userform has 2 ComboBoxes and 1 ListBox
ComboBox1 will be the one of the Column A Value
ComboBox2 will be the one of the Column B Value
I did handle that ComboBoxes already....What I need only, when those ComboBoxes been selected the related datas will fill into the ListBox accordingly...
I have a Userform where I use a ComboBox to populate raw A from a worksheet.
I use this form to update new data that relates to the selected item in the ComboBox.
In that user form, when I select an item from the ComboBox, I idetifay it's raw and display the data from columns B,C...to I in text boxes on the Userform.
I then set the "Enable" property of the text boxes that has data to "False" so that field cannot be updated again.
What I do today is if all the fields where updated, a message box will say "All fields are full" and I clear the form.
Now I want to improve my selection by removing items from the ComboBox if all the "needing update" columns are field.
By this I want to filter out the items that where already updated before and only show the ones needing update.
Here is what I have, I need to change the UserForm_Initialize section so it will only show the rows needing update.
Code:
Private Sub UserForm_Initialize()
'Populate "Cards" Combobox.
Dim rngCards As Range
Dim ws As Worksheet
Set ws = Worksheets("Rejects")
[Code]..
I am trying to populate (via VBA) a textbox/combo box from one user form to another user form.
The first user form has a room number in a text box1. If certain conditions exists, a button is selected to bring up another user form (both forms are modeless).
I want to pass/populate some of the 1st user Form info into the other user form.
I have tried the on initialize textbox1.value = textbox other.value but no dice. I can populate a user form text box from a spreadsheet but from box to box in separate user forms has me a little stumped.
I've have a combobox on a userform which should refer to a cell on a worksheet directly. E.g. The dropdown list that feeds to box is on Sheet2 range C1:C6
Whatever is selected should be copied to Sheet1 cell B18.
Now, if I populate cell B18 manually, it will pick it up, but if I then change the combobox selection, cell B18 either doesn't change or goes blank.?
