I have a macro that selects and copies and pastes a range of data from one sheet to another sheet. It works perfectly except it is pasting all the cell formatting and formulas and i only want or need the values.
View 8 RepliesI have a data sheet like so:
A B
Name Grade
Jim 82%
Bob 90%
Kelly 71%
June 95%
And I also have two cells which are designated as the low and high range. (ie C1 = 85% and C2 = 100%). I need help with the macro for the button that will copy only the rows to a new sheet that fit within the range. So in the example above, pressing the button will create this in a new sheet:
A B
Name Grade
Bob 90%
June 95%
I currently have the following code that copies a range opens notepad pastes the range opens save dialog and types the file name. The problem I have is with overwriting the existing file.
Range("A1:A202").Select
Selection.Copy
Shell "notepad.exe", vbNormalFocus
SendKeys "^V"
SendKeys "^s"
SendKeys "Total_IEDs_Hour_Of_Day_2009.xml"
SendKeys "{TAB}"
SendKeys "a"
SendKeys "{ENTER}"
Everything works fine to this point. Then it opens the do you want to overwrite dialog and I cant get it to hit yes.
need to create a macro that inserts 3 rows below each existing row of data and simply copies and pastes that data into each of the empty rows before moving on to the next unique row and doing the same thing again.
This is what I have so far, but I can't seem to get the loop right.
Rows("2:2").Select
Do
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
activecell.Offset(-1, 0).Select
Range(activecell, activecell.Offset(0, 5)).Copy
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
Selection.Offset(1, 0).EntireRow.Select
Loop
I am trying to make a macro, but because of my inexperience, it's not working out. I have got a big list (list 1) of numbers in column E. each number has some information in the cells of columns C, D and L, all in the same row. on the same sheet, I have got another, smaller set of numbers (list 2), also in column E but at the bottom of the sheet. the numbers in list 2 are all present in list 1 (but not all numbers in list 1 are present in list 2). the columns C, D and L on the same row of the numbers in list 2 are empty...............
View 4 Replies View RelatedI have an email sent via pdf and the only way to get this into excel is by copying and pasting and it all shows up in one cell.
Not much to focus on other than reading from left to right, once you see a numeric value, this should be in another cell and once you see "LS or WS or NR or COA, this will begin another cell. I had to add the dots to show where the new cell starts.
parsed data
SHELL TBN...130 CURACAO/JAPAN 18JUL... LS 3.675M PDVSA SUBS
EVERGLADES...70 CHIRIQUI GRANDE/USG14JUL... NR BP
TEXAS STAR...70 ECMEXICO/USG 11JUL... NR NR
MINERVA LIBRA...70 BAHAMAS/USG 11JUL... WS 80 STATOIL RPTD
original data
SHELL TBN 130 CURACAO/JAPAN 18JUL LS 3.675M PDVSA SUBS
EVERGLADES 70 CHIRIQUI GRANDE/USG14JUL NR BP
TEXAS STAR 70 ECMEXICO/USG 11JUL NR NR
MINERVA LIBRA 70 BAHAMAS/USG 11JUL WS 80 STATOIL RPTD
CPO ENGLAND 35 ECCANADA/OPTS 07JUL NR CREST ENERGY FLD
What i am trying to do is in 1 workbook (labled as Book1 literally), it needs to copy the sheets out of every .xls file there is in a single directory, we'll call C:MyFolderMySubFolder. There can be anywhere between 1 and 366 files in this particular folder and I need all the sheets in each file labled 'CC' copy that entire sheet, paste that sheet to Book1, go back to that file it was copied from, close it (saving changes is ok), then move on to the next file.. and the next file... and so forth
While pasting into book1, I need each WS copied from each file to paste to a new worksheet in book1 rather than combining them into 1 or overwriting, and lable each of those sheets the file name of which the sheet came from...
The names are in sequence. All files in the folder will be labled as a date such as "9-6-12" so the sheet name in book1 would be named 9-6-12. (so there may result in 366 new worksheets to book1)
I primarily use Microsoft Office Excel 2003
I have created a macro, which copies data from 1 sheet to another, in order to Format and rearrange the columns.
The problem I have is that if I "Insert" a column on sheet 2, I have to amend all of the ranges in the macro to reflect this.
Sample of the code
Worksheets("FTIS Data").Select
Range("e5:e" & Range("e" & Rows.Count).End(xlUp).Row).Copy
Worksheets("Quote Tracker").Select
Range("c5").Select
ActiveSheet.Paste
Worksheets("FTIS Data").Select
Range("g5:g" & Range("g" & Rows.Count).End(xlUp).Row).Copy
Worksheets("Quote Tracker").Select
Range("d5").Select
ActiveSheet.Paste
What I need is a macro that can be assigned to a button. This macro would search Column B for any entry (these names are selected from a drop-down list). Any time it finds an entry, it would copy that entire row of data and paste it into the Shared worksheet in the same workbook. This macro would be run on four other sheets in the workbook and would be run at least weekly. The Shared worksheet will only be blank the first time. After that, the macro would need to paste the information in the first blank row...
View 9 Replies View RelatedI am creating a excel worksheet for work. It will keep a record of telephone calls made for my office. I will upload the exported file from our switch to Sheet 1 (which works fine).
What I need to do is then have a macro that takes the information from coulmn A-K and row 5 thru 56908 if coulmn K equals Sheet 2 (and only sheet 2), and the copy and pastes it to Sheet 2. I have tried several different ways to do it but the macros just dont do it. The problems I have run across are that even if it says Sheet 3 it still pastes it to Sheet 2.
For example, I have a master sheet that has a drop-down list of the months January and February, which have their own sheets. I am trying to populate the sales of the week 1, 2 ,3 ,4 in the master sheet based on the same data for the month chosen.
View 2 Replies View RelatedI'm trying to write a macro that selects cell A1 in each sheet within the book. I've written the following code:
Code:
Sub a1()
For i = 1 To Sheets.Count
Sheets(i).Cells(1, 1).Select
Next i
Sheets(1).Select
End Sub
However, it produce this message: "Run-time error '1004': Select method of Range class failed."
If I slightly modify the code to
Code:
Sub a1()
For i = 1 To Sheets.Count
Sheets(i).Select
Cells(1, 1).Select
Next i
Sheets(1).Select
End Sub
It works fine. I'm curious why this happens.
i have a main.xls file and two data file dat1.xls and dat2.xls
mail named file have ar - br- cr- dr- er -fr sheets
dat1 named file have ar-br-cr sheets
dat2 named file have dr-er-fr sheets
and all this files data source is
colomn source a - fd
row source 29-4000
i want to make two commandbutton to main file first for dat1 second for dat2 file and i need a code to use at this buttons to make
when dat1 and dat2 close
main file user when click first button
copy dat1 file ar sheet colomn source a - fd row source 29-4000 cells to main file ar sheet colomn source a - fd row source 29-4000 cells
copy dat1 file br sheet colomn source a - fd row source 29-4000 cells to main file br sheet colomn source a - fd row source 29-4000 cells
copy dat1 file cr sheet colomn source a - fd row source 29-4000 cells to main file cr sheet colomn source a - fd row source 29-4000 cells
I have a sheet which is a basically my template, it has a bunch of formulas etc on it
I need to create about 200 copies of this exact sheet and its formatting etc, is there anyway you can bulk copy a worksheet or does this need to be done individually?
I have this code below which autofilters a range and selects the data i need, there is also a small offset part that leaves the active cell as the one in the top lef of the needed data. I also have the row count of the data in cell G1. What I need to do is something along the lines of:
View 3 Replies View RelatedI have written a macro that copies a row to a new sheet and adds a formula to that copied row.
View 8 Replies View RelatedI want to create a macro that will allow me to create a set number of copies of a specific sheet within the workbook. I have one sheet within my workbook entitled "Tab". I want to create a macro that will ask me how many copies I want to create and then proceed to create all the copies. i.e.: select to create 4 copies, with the result being: Tab[original], Tab(2), Tab(3), Tab(4), Tab(5)
View 2 Replies View RelatedI need a macro that will create a popup message any time 1) a new worksheet is created and 2) a worksheet is copied. The contents of the message left aside (use "message" as our example message)
View 9 Replies View RelatedI'm looking to automate the process of repeating an excel worksheet (which is set up with various tables and formulas) for various countries.
I have a referenced list of countries set up in worksheet 1. So for example: in worksheet 2 I have a sheet set up for Albania - and I want to repeat this for another 100 countries. . Can I use the reference list of countries to auto-repeat worksheet 2 for worksheets 3 - 102 and auto-title the worksheet tabs? (E.g. Brazil, Canada, Chile..............)
I have this code that works where Column A and B from 12 sheets are copied to a "Complete" sheet where it is saved as a CSV file for import.
I'm fairly new at this and know this code could be simplified to loop through the 12 sheets instead of copying the code 12x!!
I've copied the code for the 1st 2 sheets:
Sheets("Sheet1").Select
For i = 3 To Cells(Rows.Count, 1).End(xlUp).Row
OutSH.Cells(1, outcol).Value = Cells(i, 1).Value
OutSH.Cells(2, outcol).Value = Cells(i, 2).Value
OutSH.Cells(2, outcol + 1).Value = Cells(i, 3).Value
outcol = outcol + 1
[Code] ......
I have created a macro that copies information from various cell on one sheet to another. When I run the macro the screen flickers about 5 times. Is there a way to stop.
View 5 Replies View RelatedThis is probably a VBA thing, but there might be a simpler solution. Either would be grand!
Basically, I have a four sheet workbook that needs to be printed out in its entirety (no problem doing that ); however, I would like the final sheet (called "Room Data") to be printed, let's say ten times.
So basically I'd get a single print of the first three sheets and ten of the "Room Data".
Any ideas on how to do this without having to manually print the final sheet multiple times or creating ten identical sheets in the workbook?
I found the code below and it works perfectly if I want to copy all the other sheets to a master sheet. But, I need to specify specific sheets. Basically I have a workbook consisting of multiple sheets and multiple "master" sheets so I need to specify in the code which sheets it should be copying.
[Code] ........
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
I have a workbook where Sheet A is a Master Order Form. Employees will input the quantities they need in Column C. The sheet will be otherwise protected. Sheet B is a "printable" order form that only contains the rows from Sheet A where the Quantity on Sheet A is not blank and is >=1. This will allow me to print sheet B with no blank rows for the items I don't need.
I found the following formula which claims to be able to do what I want:
=IF(ROWS($1:1)>MAX(C:C),"",INDEX(A:A,MATCH(ROWS($1:1),C:C,0)))
I can't get it to work correctly across two sheets.
I've attached Sample of spreadsheet for review : HDForm_Test01.xlsx
Example, I have a sheet named DATA1, I want to add a new worksheet, copy a certain range from the DATA1 sheet to the new sheet and rename it the same name DATA1 and delete the old DATA1 sheet.
Also, the sheetname will be unknown, the macro must get the sheet name first.
This work is challenging for me, now am doing Comparing the Data between One Sheet to Another Sheet, and Paste into Different Sheet.
I am Manually Comparing the Data between two different sheet, If the Data is matching, or Not matching, those data i have document in other sheet, So i have lots of records available. so manually doing its very difficult, but macro can compare the data. I will give the details of my process and example sheet is attached here....
Data 1.xls == This sheet have multiple tab with data and different order no.(Multiple Tab with thousands of records available)
orderNumberModified.xls == Modified data available. (Compare the OrderNumber to Data1.xls)
Now we have to compare the modified.xls and Data1.xls... For modified.xls have ORDERNUMBER available, that Numbers match with all tabs from Data 1.xls sheet.
If ORDERNUMBERS are matching, Need to copy the entire row from modified.xls To AVAILABLE TAB from Comparedata.xls sheet
If ORDERNUMBERS is not matching, copy the entire row from modified.xls To NOTAVAILABLE DATA tab from comparedata.xls sheet
Hi. Does anyone know a formula to copy a selected range of cells on sheet one to a range on sheet three when a check box in checked. Ex. copy range a4:j4 on sheet one into a4:j4 on sheet three once the check box for on sheet one is checked?
View 9 Replies View RelatedI want to do is add data into Sheet A each day then press a button which will copy the data in a range and paste it into Sheet B, but I want to create a list of all data so I need it to find the next empty cell and start the paste from there (if that makes sense).
I want it to create a data base on one sheet from a daily import, I have a code to copy one cell to next empty cell but dont know how to duplicate it to a range.
I hope I have given you enough info this is what I have done so far
Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 1)
Set ws = Sheets("A")
For bi = 1 To 1
vData(bi) = Application.Choose(bi, ws.Range("A1"))
[Code]....
I need to copy columns b,g & h from workbook1 to workbook 2 c ,e, f
workbook1 is the path mentioned in cell A1
Workbook2 is the path mentioned in cell A2