Move Around Sheet & Copy & Paste
Dec 29, 2006
I am trying to use a conditional macro to move data around in a spreadsheet. Is there a way to use an IF AND conditional statement in a macro? As an example:
Range Select ("M3")
' THIS IS THE LINE I AM HAVING A PROBLEM WITH
If Selection("M3").Select And Selection("N3").Select = "1" Then
Selection.Offset(6, -9).Select
Selection.Copy
Selection.Offset(-6, 0).Select
ActiveSheet.Paste
Selection.Offset(0, 1).Select
Selection.Copy
Selection.Offset(6, -1).Select
ActiveSheet.Paste
Else: Selection.Offset(0, 1).Select
End If
End Sub
View 9 Replies
ADVERTISEMENT
Jul 24, 2014
Macro, which can cut/Paste from sheet "Pastin" to Sheet "Robot".
The input in sheet Pastin is veritical and the the result is in a row horiontsal.
There can be no references between the names for the columns or rows, only the cell to move.
I would like it to be so when I run the macro it example move it to sheet robot from row A3, and if I do again it make the next one from Row A4.
What I want to move can be seen in below.
Cell on the left is sheet "Pastein" and cells on the right is sheet "Robot"
Special is that one move have to be taken from on cell comma separated input, so it goes to sheet "Robot" for each text/number, between the comma.
I have attached a test sheet to work with also.
[Code] ...
Testmove.xls
View 6 Replies
View Related
Mar 8, 2007
i need to have 6 or so cells copied and pasted into another sheet. (when a button is pressed) However before the data is pasted it checks if there is anything in the cell(s) that are being pasted into, if there is something then move down a line and paste. Here is the code i have already:
Sub Order2Invoice()
Sheets("OrderDatabase").Select
Range("B65536").End(xlUp).Offset(1, 0).Select
With ActiveCell
.Value = Orderform!G5.Value
.Offset(0, 1) = Orderform!E10.Value
.Offset(0, 2) = Orderform!E11.Value
.Offset(0, 3) = Orderform!E12.Value
.Offset(0, 4) = Orderform!E13.Value
.Offset(0, 5) = Orderform!E15.Value
.Offset(0, 8) = Orderform!E15.Value
End With
Sheets("Invoice").Select
End Sub
View 4 Replies
View Related
Mar 18, 2014
I am trying to copy one worksheet using the "move/copy" function that is available when you right click a tab name and want to copy the worksheet in the same workbook
The steps I'm using are:
1. Right click the tab name
2. Select Move or Copy,
3. Select Create a Copy
4. Click OK
Doing all of the above does not work. When the new worksheet opens, all columns are the same width. It seems to be stuck on "autofit column width" setting of 8.5. The original worksheet is several columns wide all with different width settings.
I've also used Copy, Paste Special and selected column widths and that does not work either.
View 3 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Jun 20, 2013
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
View 9 Replies
View Related
Sep 6, 2012
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies
View Related
Jan 24, 2010
i am trying to get a vba procdeure to copy Sheet "Template" and move to the end, but when i run the code, the code copies the template but does not move to the end, how can the below be modifed?
Sub Macro3()
Sheets("Template").Select
Sheets("Template").Copy Before:=Sheets(6)
End Sub
View 9 Replies
View Related
Aug 13, 2009
I have the following code to move/copy worksheet and then copy and paste
special values. Is it possible during this process to get the user to change the 'moved' worksheet name ?
View 4 Replies
View Related
Mar 23, 2014
Here's a sample sheet.
I receive spreadsheets with data sorted by column. There might be 500-600 records in approximately 1-8 categories, 14 columns wide. One column is used for the category. I would like to copy or move the data in each category to a new sheet within the file, so I can work with each category separately. I do this manually now, and have to do it multiple times for each file, as the data changes daily.
The category names are rarely the same from one batch to the next, so the routine will have to look at the categories and understand their names in order to put the data on a new sheet. Category names are alpha-numeric, like RA114, RC109.
This seems like a VB app, but I don't know VB! Is there a way to do this without VB? If not, is there a well-documented VB template or utility I might use to modify?
View 4 Replies
View Related
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
May 26, 2013
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies
View Related
Aug 21, 2014
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
View 6 Replies
View Related
Apr 3, 2007
Everything seemed to be working until i tried to copy and paste something on my spreadsheet (sheet titled Input Sheet). When I paste anything onto this sheet I see the Paste happen and then Excel just hangs (no errors?). I just left it for over 5 minutes and nothing happened (still hanging). I had to close it down using X
I have LOTS of different codes and different sheets in my spreadsheet. I was wondering if anyone knows how I can go about Pinpointing the problem. Chances are no one will be cutting and pasting but I would like to know why this is happening but have no idea how to go about investigating?
View 9 Replies
View Related
Mar 31, 2008
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies
View Related
Jul 29, 2014
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Sheets("Mapping QTR2").Select
Range("B137:D230").Select
Selection.Copy
Sheets("ExpDB_Q1").Select
[Code] ....
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
View 3 Replies
View Related
Mar 11, 2014
I have a sheet named "Fittings Summary" with an export button. I need some code that will copy range A1:G38 of the fitting summary sheet then open a dialogue box asking for the following "Please Enter Tag No" once a tag number is entered I would like a new sheet to be created in the same workbook named with the tag no entered previously then the copied cells pasted into it. I would like to keep the formatting of the cells but not the formulas within.
View 10 Replies
View Related
Jan 20, 2009
I would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
View 8 Replies
View Related
Mar 5, 2009
i want to copy a row from one sheet and paste it in another sheet based on a condition.
View 5 Replies
View Related
Jul 26, 2012
I have set up a workbook with sheets named for each month.
I have 70+ separate excel files (one for each month) that each have a single sheet I want to copy into the new workbook's corresponding month sheet.
Each file is named different but the name of the sheet in those files that I need will all be the same.
Is there a way I could sit in the sheet I want it pasted to, run a macro that I can point to the correct file/workbook -- preferably without opening -- and then have it copy the contents of the sheet I want (again, will always have the same sheet name).
I want the sheet copied with formatting and all, an exact copy.
This link seemed useful - if i could control which sheet it copies more easily since for me the source data always has a different file name. [URL] ........
I thought I lost that original message so I rewrote everything - differently - then I saw the restore button so I'm leaving both phrasings.
I would like to know if there is a Macro that could ask me which workbook to copy from, select the sheet in that workbook called CAP (sheet will always have the same name but I need to copy the sheet from 70 different files/workbooks) copy the whole sheet with formatting and all, and then paste it in my active sheet on the new workbook I am in.
I want to take data about a particular partner we have (CAP) out of the monthly summaries for the last ~72 months (which each have their own file/workbook) and put them all in one workbook just for this partner, on each sheet by month still.
I am only interested in automating everything I have to do for 1 month, but in a way that would easily let me do it again for the next month, and the next and the next, 70 times.
But a Macro would still be easier than opening each file, going to the sheet I want, copying everything, going back to my new workbook, pasting everything, closing the extra workbook, then doing that ALL again 70 times.
View 1 Replies
View Related
Mar 28, 2014
I have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
View 9 Replies
View Related
Mar 27, 2014
Is there a vba codes to copy all data from sheet 1 to 5 in workbook to sheet 6 same workbook? and paste it as value.
View 5 Replies
View Related
Apr 29, 2014
I have spent ages creating a work diary and have protected the sheets using VBA however on finishing the sheet one important thing that needs to happen is the ability to copy and paste information from the boxes to another worksheet. i.e MONDAY - SUNDAY
View 1 Replies
View Related
May 18, 2014
Macro Button to copy and paste from different sheets, I need to Copy SKU which is in Sheet 1 Column B and Find in Sheet 2 then Copy the UPC on Sheet 2 and Paste to Corresponding SKU in Sheet 1 Under Column C. If an SKU doesnt show on Sheet 2, it should leave Sheet 1 Column C blank and go on with others.
View 3 Replies
View Related
Feb 13, 2012
I have a requirement to copy a few column(like a,d,e,f) from sheet1 and paste it to sheet2 column.
where column a of sheet1 will be copy to column d of sheet2.if anything data is already there then overwrite that column.
View 2 Replies
View Related
Oct 11, 2013
What I'm looking to do is copy sheet named January, and paste into a new sheet naming it February, then in February copy and paste into another new sheet naming it March and so (but keeping previous months). My thinking was a pop up to name the sheet to copy then another to name the sheet that it's pasted in.
View 2 Replies
View Related
Sep 11, 2006
I want to copy data from the current sheet, and past it in the "montly" sheet.
'i and j were defined above, with a Case statement
Range(" Ai:Cj").Select
Selection.Copy
Sheets("monthly").Select
' I want the upper left cell of the pasted area to be A11
Range("A11").Select
ActiveSheet.Paste
I get an error saying that I should select one cell and then paste. But I thought that that is what I did...
View 2 Replies
View Related
Dec 10, 2008
Copy and paste to a different sheet. This is what i have
View 2 Replies
View Related
Apr 23, 2009
I have this piece of code that copies a block of cells from sheet B to sheet A.
View 14 Replies
View Related
Sep 1, 2009
I have 2 sheets, I want to paste the data from sheet2 to the bottom of sheet1... However the number of rows change each day on sheet1, so the cell that the paste happens too changes each day. Also I will need to do this to a few different sheets, so if you could make this universal and put in the comments in the formula.
View 2 Replies
View Related
